W. Ryu

发表

Creep Properties of Hastelloy-X Alloy for the High Temperature Gas-Cooled Reactor

Woo-Gon Kim, S. Yin, W. Ryu, 2006 .

Growth of SiC nanowires within stacked SiC fiber fabrics by a noncatalytic chemical vapor infiltration technique

W. Ryu, Ji Yeon Park, Weon‐Ju Kim, 2007 .

Usefulness of Creep Work-Time ]Relation for Determining Stress Intensity Limit of High-Temperature Components

Woo-Gon Kim, W. Ryu, Kyung-Yong Lee, 2003 .

Grain boundary filmlike Fe–Mo–Cr phase in nitrogen-added type 316L stainless steels

W. Ryu, C. Sung, Y. Oh, 1999 .

Microstructure and Mechanical Properties of Heat-Resistant Silicon Carbide Ceramics

W. Ryu, T. Nishimura, Young‐Wook Kim, 2007 .

Thermally activated deformation of Zircaloy-4

C. S. Rim, W. Ryu, Sun-Ig Hong, 1984 .

M2N nitride phases of 9% chromium steels for nuclear applications

W. Ryu, S. H. Kim, Yinzhong Shen, 2008 .

Type 316l Stainless Steels Exhibiting Five-Fold Symmetry Mo-Rich Phase

W. Ryu, Y. Oh, Jun-Hwa Hong, 1997, Microscopy and Microanalysis.

Selective growth of β-SiC whisker on a patterned Si (111) substrate for a field emission device

D. Kim, W. Ryu, Jong Hoon Park, 2007 .

Strain rate dependence of iodine-induced stress corrosion cracking of Zircaloy-4 under internal pressurization tests

W. Ryu, Jai-Young Lee, Y. Kang, 1990 .

Breakdown of One-to-One Correspondence in Energy and Volume in a High-Pressure Heat-Treated Zr-Based Metallic Glass During Annealing

W. Ryu, R. Yamada, Y. Shibazaki, 2020, Scientific Reports.

Process for dense 2D SiC fiber-SiC matrix composites

W. Ryu, Young‐Wook Kim, Dong-Soo Park, 2007 .

The observation and identification of the oxide film on the creep cavity wall of type 316L stainless steel

W. Ryu, Yongbok Lee, Jinsung Jang, 2004 .

Effect of nitrogen on high temperature low cycle fatigue behaviors in type 316L stainless steel

W. Ryu, Jun-Hwa Hong, Si-Kyung Choi, 1998 .

Influence of Precipitation and Grain Size on the Hot Ductility of Alloy C-276 ESR Ingots

W. Ryu, J. Jang, T. Kim, 2001 .

Effect of grain size on creep properties of type 316LN stainless steel

W. Ryu, D. Kim, Dokyol Lee, 2001 .

Oxidation Characteristics and Oxide Layer Evolution of Alloy 617 and Haynes 230 at 900 °C and 1100 °C

W. Ryu, C. Jang, Daejong Kim, 2009 .

Effect of nitrogen on the dynamic strain ageing behaviour of type 316L stainless steel

W. Ryu, Jun-Hwa Hong, Si-Kyung Choi, 1998 .

Characterizations of Li2TiO3 prepared by a solution combustion synthesis and fabrication of spherical particles by dry-rolling granulation process

Sang-Jin Lee, Weon-Ju Kim, Choong-Hwan Jung, 2006 .

Synthesis and Dilatometric Study of Ca(Sr, La)TiO3 Prepared by Solution Combustion Synthesis (SCS)

W. Ryu, Ji Yeon Park, C. Jung, 2007 .

High Temperature Oxidation Behavior of Alloy 617 and Haynes 230 in Impurity-Controlled Helium Environments

W. Ryu, Donghoon Kim, C. Jang, 2011 .

Corrosion behaviors of sintered and chemically vapor deposited silicon carbide ceramics in water at 360 °C

W. Ryu, Ji Yeon Park, Weon‐Ju Kim, 2003 .

Vanadium nitride precipitate phase in a 9% chromium steel for nuclear power plant applications

Sung Ho Kim, Woo Seog Ryu, Chang Hee Han, 2008 .

Effect of a SiC whisker formation on the densification of tyranno SA/SiC composites fabricated by the CVI process

Weon-Ju Kim, W. Ryu, J. Y. Park, 2006 .

Characterization of the SiCf/SiC Composite Fabricated by the Whisker Growing Assisted CVI Process

W. Ryu, Ji Yeon Park, Weon‐Ju Kim, 2005 .

Oxidation behaviors of wrought nickel-based superalloys in various high temperature environments

W. Ryu, Donghoon Kim, Y. Yoo, 2011 .

Tailored hardening of ZrCuAl bulk metallic glass induced by 2D gradient rejuvenation

W. Ryu, R. Yamada, J. Saida, 2020, NPG Asia Materials.

Unveiling a new type of ultradense anomalous metallic glass with improved strength and ductility through a high-pressure heat treatment

W. Ryu, R. Yamada, Y. Shibazaki, 2019, NPG Asia Materials.

Elongation minimum and strain rate sensitivity minimum of zircaloy-4

Woo Seog Ryu, Sun Ig Hong, Chang Saeng Rim, 1983 .

Evaluation of Factors Affecting Cyclic Softening Behaviors of Mod. 9Cr-1Mo Steel

W. Ryu, D. Kim, 2011 .

The effect of W and N addition on the mechanical properties of 10Cr steels

W. Ryu, S. -. Kim, B. J. Song, 2001 .

Evaluation of the creep-fatigue damage mechanism of Type 316L and Type 316LN stainless steel

W. Ryu, Jong-Hwa Chang, Dae Whan Kim, 2008 .

Role of dynamic strain aging on low cycle fatigue and crack propagation of type 316L(N) stainless steel

Woo-Gon Kim, W. Ryu, D. Kim, 2003 .

TEM investigations of MN nitride phases in a 9% chromium ferritic/martensitic steel with normalization conditions for nuclear reactors

Sung Ho Kim, Woo Seog Ryu, Chang Hee Han, 2009 .

EFFECTS OF IRRADIATION ON THERMAL CONDUCTIVITY OF ALLOY 690 AT LOW NEUTRON FLUENCE

Dae Gyu Park, Woo Seog Ryu, Ung Sup Song, 2013 .

Aging effect on the thermal transient behavior of the fuel cladding of a sodium-cooled fast reactor

W. Ryu, J. Kim, H. Heo, 2017 .

Fabrication and Ion Irradiation Characteristics of SiC-Based Ceramics for Advanced Nuclear Energy Systems

W. Ryu, Ji-Yeon Park, Weon‐Ju Kim, 2005 .

Densification of SiCf/SiC composite by the multi-step of whisker growing and matrix filling

W. Ryu, Soon-Gil Yoon, Ji Yeon Park, 2004 .

Breakdown of One-to-One Correspondence in Energy and Volume in a High-Pressure Heat-Treated Zr-Based Metallic Glass During Annealing

W. Ryu, R. Yamada, Y. Shibazaki, 2020, Scientific Reports.

Microstructure and Mechanical Properties of Cr-Mo Steels for Nuclear Industry Applications

W. Ryu, I. Kuk, S. -. Kim, 1999 .

Tension and creep design stresses of the “Hastelloy-X” alloy for high-temperature gas cooled reactors

Woo-Gon Kim, W. Ryu, Jong-Hwa Chang, 2008 .

Creep Analysis of Cr-Mo Steels Using a Dislocation Based Constitutive Modelling

W. Ryu, Hyoung-Seop Kim, S. Hong, 2004 .

A study of the properties of pyrolytic carbons deposited from propane in a tumbling and stationary bed between 900 and 1230°C

W. Ryu, Jai-Young Lee, J. Je, 1983 .

Characterization of polymer-modified cement as a solidification agent for the radwaste

W. Ryu, D. Hong, Young-Yong Ji, 2012 .

Ion irradiation effects on the matrix phase of $SiC_f$/SiC composites prepared by the whisker growing assisted CVI process

W. Ryu, Ji-Yeon Park, Weon‐Ju Kim, 2005 .

Finite Element Analysis of the Onset of Necking and the Post-Necking Behaviour during Uniaxial Tensile Testing

W. Ryu, Hyoung-Seop Kim, S. -. Kim, 2005 .

A neural network model to predict low cycle fatigue life of nitrogen-alloyed 316L stainless steel

M. D. Mathew, W. Ryu, Dae Whan Kim, 2008 .

Detailed analysis of uranium silicide dispersion fuel swelling

W. Ryu, G. Hofman, 1989 .

A numerical approach to determine creep constants for Time-Temperature Parametric methods

Woo-Gon Kim, W. Ryu, C. Lee, 2009 .

DSC study on carbide precipitation reaction in Inconel 600

J. M. Park, W. Ryu, Y. Kang, 1994 .

Evaluation of Monkman-Grant parameters for type 316LN and modified 9Cr-Mo stainless steels

Woo-Gon Kim, W. Ryu, S. -. Kim, 2002 .

Creep characterization of type 316LN and HT-9 stainless steels by the K-R creep damage model

Sung Ho Kim, Woo Seog Ryu, Woo-Gon Kim, 2001 .

Evaluation of Creep Crack Growth Behavior of Type 316LN Stainless Steel

Woo-Gon Kim, W. Ryu, Kyung-Yong Lee, 2003 .