P. McHugh

发表

Optimizing the design of a bioabsorbable metal stent using computer simulation methods.

J. A. Grogan, S. Leen, P. McHugh, 2013, Biomaterials.

A review on dielectric elastomer actuators, technology, applications, and challenges

P. McHugh, A. O’Halloran, Fergal O'Malley, 2008 .

Micromotion and friction evaluation of a novel surface architecture for improved primary fixation of cementless orthopaedic implants.

P. McHugh, N. Harrison, W. Curtin, 2013, Journal of the mechanical behavior of biomedical materials.

Computational study on the effect of contact geometry on fretting behaviour

S. Leen, P. McHugh, T. Zhang, 2011 .

Computational modeling of metal matrix composite materials. I: Isothermal deformation patterns in ideal microstructures

Peter E. McHugh, C. F. Shih, R. J. Asaro, 1993 .

Dependence of mechanical properties of polyamide components on build parameters in the SLS process

P. McHugh, B. Caulfield, S. Lohfeld, 2007 .

Influence of statistical size effects on the plastic deformation of coronary stents.

J. A. Grogan, S. Leen, P. McHugh, 2013, Journal of the mechanical behavior of biomedical materials.

Measurement of the microstructural fracture toughness of cortical bone using indentation fracture.

P. McHugh, L. Mullins, M. Bruzzi, 2007, Journal of biomechanics.

Heterogeneous linear elastic trabecular bone modelling using micro-CT attenuation data and experimentally measured heterogeneous tissue properties.

F. O'Brien, P. McHugh, O. Kennedy, 2008, Journal of biomechanics.

Failure modelling of trabecular bone using a non-linear combined damage and fracture voxel finite element approach

P. McHugh, N. Harrison, D. O’Mahoney, 2013, Biomechanics and modeling in mechanobiology.

A finite element methodology for wear–fatigue analysis for modular hip implants

Noel M. Harrison, Sean B. Leen, Peter E. McHugh, 2013 .

Predicting the Elastic Properties of Selective Laser Sintered PCL/β-TCP Bone Scaffold Materials Using Computational Modelling

Stefan Lohfeld, Heather Doyle, P. McHugh, 2013, Annals of Biomedical Engineering.

Multi-axial mechanical stimulation of HUVECs demonstrates that combined loading is not equivalent to the superposition of individual wall shear stress and tensile hoop stress components.

Peter E McHugh, P. McHugh, B. Murphy, 2009, Journal of biomechanical engineering.

Computational mechanics modelling of cell–substrate contact during cyclic substrate deformation

Peter E. McHugh, J. P. McGarry, Bruce P. Murphy, 2005 .

An ovine in vivo framework for tracheobronchial stent analysis

Peter E. McHugh, Barry O’Brien, Stefan Jockenhoevel, 2017, Biomechanics and modeling in mechanobiology.

A review of deformation and fatigue of metals at small size scales

P. McHugh, T. Connolley, M. Bruzzi, 2005 .

Arterial and Atherosclerotic Plaque Biomechanics with Application to Stent Angioplasty Modeling

P. McHugh, J. McGarry, Brían L. O’Reilly, 2017 .

Mathematical Models of Cell Motility

P. E. McHugh, J. P. McGarry, P. McHugh, 2007, Cell Biochemistry and Biophysics.

Computational modelling of magnesium stent mechanical performance in a remodelling artery: Effects of multiple remodelling stimuli

Enda L. Boland, James A Grogan, Peter E McHugh, 2019, International journal for numerical methods in biomedical engineering.

Mechanical behavior of in vitro blood clots and the implications for acute ischemic stroke treatment

P. McHugh, J. Chueh, M. Gounis, 2019, Journal of NeuroInterventional Surgery.

Engineering Assisted Surgery™: A route for digital design and manufacturing of customised maxillofacial implants

Stefan Lohfeld, Peter E. McHugh, N. Peckitt, 2007 .

A physical corrosion model for bioabsorbable metal stents.

P E McHugh, J. A. Grogan, S. Leen, 2014, Acta biomaterialia.

The influence of passivation and electropolishing on the performance of medical grade stainless steels in static and fatigue loading

P. McHugh, W. Carroll, L. Weldon, 2005, Journal of materials science. Materials in medicine.

The Stress–Strain Behavior of Coronary Stent Struts is Size Dependent

P. E. McHugh, P. McHugh, B. Murphy, 2003, Annals of Biomedical Engineering.

Review of Mechanical Testing and Modelling of Thrombus Material for Vascular Implant and Device Design

P. McHugh, J. McGarry, M. Gilvarry, 2017, Annals of Biomedical Engineering.

Head-to-nerve analysis of electromechanical impairments of diffuse axonal injury

P. McHugh, M. Gilchrist, M. Destrade, 2018, Biomechanics and modeling in mechanobiology.

Electro‐mechanical response of a 3D nerve bundle model to mechanical loads leading to axonal injury

P. McHugh, M. Destrade, I. Cinelli, 2018, International journal for numerical methods in biomedical engineering.

Effects of nerve bundle geometry on neurotrauma evaluation

P. McHugh, M. Destrade, I. Cinelli, 2018, 2017 8th International IEEE/EMBS Conference on Neural Engineering (NER).

Computational Modeling of the Mechanical Performance of a Magnesium Stent Undergoing Uniform and Pitting Corrosion in a Remodeling Artery

Enda L. Boland, J. A. Grogan, P. McHugh, 2017 .

Void growth simulations in single crystals

P. E. McHugh, P. McHugh, T. L. O'Regan, 1997 .

A finite element prediction of strain on cells in a highly porous collagen-glycosaminoglycan scaffold.

P. Prendergast, P. McHugh, D. O’Mahoney, 2008, Journal of biomechanical engineering.

Modeling of Biodegradable Polyesters With Applications to Coronary Stents

Caoimhe A. Sweeney, Reyhaneh Neghabat Shirazi, P. McHugh, 2017 .

Effects of material thickness and processing method on poly(lactic-co-glycolic acid) degradation and mechanical performance

Reyhaneh Neghabat Shirazi, P. McHugh, Y. Rochev, 2016, Journal of Materials Science: Materials in Medicine.

Response of mesenchymal stem cells to the biomechanical environment of the endothelium on a flexible tubular silicone substrate.

Valerie Barron, Peter E. McHugh, Mary Murphy, 2008, Biomaterials.

Computational Examination of the Effect of Material Inhomogeneity on the Necking of Stent Struts Under Tensile Loading

Peter E. McHugh, Robert M. McMeeking, J. P. McGarry, 2007 .

Modelling of Atherosclerotic Plaque for Use in a Computational Test-Bed for Stent Angioplasty

P. McHugh, J. McGarry, C. Conway, 2014, Annals of Biomedical Engineering.

Calibration of a constitutive model for the post-yield behaviour of cortical bone.

P. McHugh, L. Mullins, M. Bruzzi, 2009, Journal of the mechanical behavior of biomedical materials.

Fabrication and characterization of gefitinib‐releasing polyurethane foam as a coating for drug‐eluting stent in the treatment of bronchotracheal cancer

Donnacha J McGrath, P. McHugh, W. Hennink, 2017, International journal of pharmaceutics.

Experimental investigation into the size effect on the microscale fatigue behaviour of 316L stainless steel

P. McHugh, T. Connolley, M. Bruzzi, 2017 .

Development of an in vitro model of calcified cerebral emboli in acute ischemic stroke for mechanical thrombectomy evaluation

N. Sourour, P. McHugh, F. Clarençon, 2020, Journal of NeuroInterventional Surgery.

Sustained release of targeted cardiac therapy with a replenishable implanted epicardial reservoir

Claudia E. Varela, C. Walsh, E. Roche, 2018, Nature Biomedical Engineering.

Mechanical and Corrosion Testing of Magnesium WE43 Specimens for Pitting Corrosion Model Calibration

Reyhaneh Neghabat Shirazi, Enda L. Boland, J. A. Grogan, 2018, Advanced Engineering Materials.

A biomechanical study comparing the compressive forces generated by a conventional 4.5 AO/ASIF cortical lag screw with a differentially pitched cortical compression screw.

P. McHugh, W. Curtin, J. Street, 2009, Acta of bioengineering and biomechanics.

Multiscale Experimental and Computational Modeling Approaches to Characterize Therapy Delivery to the Heart from an Implantable Epicardial Biomaterial Reservoir

Reyhaneh Neghabat Shirazi, Claudia E. Varela, E. Roche, 2019, Advanced healthcare materials.

The effect of various bone conditions on the biomechanics of the thoracolumbar spine—finite element study

Valerie Barron, Peter E. McHugh, M. A. Tyndyk, 2006 .

An experimental and computational investigation of the material behaviour of discrete homogenous iliofemoral and carotid atherosclerotic plaque constituents.

P. McHugh, S. Sultan, N. Hynes, 2020, Journal of biomechanics.

An Experimental and Computational Investigation of Bone Formation in Mechanically Loaded Trabecular Bone Explants

G. Niebur, P. McHugh, L. McNamara, 2016, Annals of Biomedical Engineering.

Mechanical Stimulation of Bone Marrow In Situ Induces Bone Formation in Trabecular Explants

G. Niebur, P. McHugh, L. McNamara, 2015, Annals of Biomedical Engineering.

Effect of stride length on symptoms of exercise‐induced muscle damage during a repeated bout of downhill running

R. Eston, C. Byrne, P. McHugh, 2000, Scandinavian journal of medicine & science in sports.

Evaluation of a Multiscale Modelling Methodology to Predict the Mechanical Properties of PCL/β-TCP Sintered Scaffold Materials

P. McHugh, S. Lohfeld, P. McDonnell, 2015, Annals of Biomedical Engineering.

Quantification of the regional bioarchitecture in the human aorta

P. McHugh, A. Black, K. Moerman, 2020, Journal of anatomy.

Investigation of the strengthening of particulate reinforced composites using different analytical and finite element models

S. Schmauder, M. Poech, P. McHugh, 1999 .

A physical corrosion model for bioabsorbable 1 metal stents 2

S. Leen, P. McHugh, J. Grogan, 2020 .

Numerical Simulation of Stent Angioplasty with Predilation: An Investigation into Lesion Constitutive Representation and Calcification Influence

E. Edelman, P. McHugh, J. McGarry, 2017, Annals of Biomedical Engineering.

Computational Analysis of the Utilisation of the Shape Memory Effect and Balloon Expansion in Fully Polymeric Stent Deployment

P. McHugh, A. Bobel, 2017, Cardiovascular Engineering and Technology.

DIFFERENTIATION OF MESENCHYMAL STEM CELLS IS REGULATED BY OSTEOCYTE AND OSTEOBLAST CELLS IN A SIMPLIFIED BONE NICHE'. European Cells

G. Niebur, G. Shaw, F. Barry, 2018 .

Modelling the thermo-mechanical behaviour of an Al alloy-SiCp composite effects of particle shape and microscale fracture

P. McHugh, P. Connolly, 1994 .

Evaluating the interaction of a tracheobronchial stent in an ovine in-vivo model

Peter E. McHugh, Barry O’Brien, Stefan Jockenhoevel, 2018, Biomechanics and modeling in mechanobiology.

PulmoStent: In Vitro to In Vivo Evaluation of a Tissue Engineered Endobronchial Stent

U. Steinseifer, P. McHugh, R. Kok, 2017, Annals of Biomedical Engineering.

Selection and fabrication of a non-woven polycarbonate urethane cover for a tissue engineered airway stent.

Donnacha J McGrath, U. Steinseifer, P. McHugh, 2016, International journal of pharmaceutics.

Comparison of Covered Laser-cut and Braided Respiratory Stents: From Bench to Pre-Clinical Testing

P. McHugh, S. Jockenhoevel, M. Bruzzi, 2019, Annals of Biomedical Engineering.

methodology to predict

P. McHugh, S. Lohfeld, P. McDonnell, 2019 .

Failure modelling of trabecular bone using a non-linear combined damage and fracture voxel finite element approach

P. McHugh, N. Harrison, D. O’Mahoney, 2013, Biomechanics and modeling in mechanobiology.

Finite Element Simulation and Experimental Determination of Residual Stresses after Extrusion Process in Metal Matrix Composites

P. McHugh, G. Albertini, D. Ilie, 2005 .

Investigation of finite element mesh independence in rate dependent materials

P. McHugh, F. Harewood, 2006 .

Predicting the Elastic Properties of Selective Laser Sintered PCL/β-TCP Bone Scaffold Materials Using Computational Modelling

P. McHugh, S. Lohfeld, H. Doyle, 2014, Annals of Biomedical Engineering.

Micro-scale testing and micromechanical modelling for high cycle fatigue of CoCr stent material.

S. Leen, P. McHugh, F. Dunne, 2015, Journal of the mechanical behavior of biomedical materials.

Introduction to Crystal Plasticity Theory

Peter E. McHugh, P. McHugh, 2004 .

Computational modeling of microstructures

Robert J. Asaro, P. E. McHugh, A. G. Varias, 1989, Future Gener. Comput. Syst..

Computational modelling of the cyclic deformation of aluminium and aluminium matrix composites

L. H. Lim, P. McHugh, N. O'Dowd, 1996 .

Finite element predictions compared to experimental results for the effective modulus of bone tissue engineering scaffolds fabricated by selective laser sintering

S. Lohfeld, P. E. McHugh, P. McHugh, 2009, Journal of materials science. Materials in medicine.

Automated ex-situ detection of pitting corrosion and its effect on the mechanical integrity of rare earth magnesium alloy - WE43

P. McHugh, F. Benn, T. Vaughan, 2021, Bioactive materials.

Electrothermal Equivalent Three-Dimensional Finite-Element Model of a Single Neuron

I. Cinelli, M. Destrade, M. Duffy, 2018, IEEE Transactions on Biomedical Engineering.

Thermo-electrical equivalents for simulating the electro-mechanical behavior of biological tissue

Maeve Duffy, Peter McHugh, Ilaria Cinelli, 2015, 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

A corrosion model for bioabsorbable metallic stents.

P E McHugh, S. Leen, P. McHugh, 2011, Acta biomaterialia.

Impact of Degradation and Material Crystallinity on the Mechanical Performance of a Bioresorbable Polymeric Stent

P. McHugh, W. Ronan, Connor J. Shine, 2021, Journal of Elasticity.

Modelling of in vitro chondrocyte detachment

P. McHugh, J. McGarry, 2008 .

Modeling of Size Dependent Failure in Cardiovascular Stent Struts under Tension and Bending

P. E. McHugh, P. McHugh, F. J. Harewood, 2007, Annals of Biomedical Engineering.

Osteogenic differentiation of mesenchymal stem cells is regulated by osteocyte and osteoblast cells in a simplified bone niche.

G. Niebur, G. Shaw, F. Barry, 2012, European cells & materials.

Computational modelling of ovine critical-sized tibial defects with implanted scaffolds and prediction of the safety of fixator removal.

P. McHugh, L. Dürselen, S. Lohfeld, 2015, Journal of the mechanical behavior of biomedical materials.

Linking the effect of localised pitting corrosion with mechanical integrity of a rare earth magnesium alloy for implant use

P. McHugh, F. Benn, T. Vaughan, 2022, Bioactive materials.

Comparing coronary stent material performance on a common geometric platform through simulated bench testing.

P. E. McHugh, J. A. Grogan, S. Leen, 2012, Journal of the mechanical behavior of biomedical materials.

An enhanced phenomenological model to predict surface-based localised corrosion of magnesium alloys for medical use.

P. McHugh, T. Vaughan, A. Kopp, 2022, Journal of the mechanical behavior of biomedical materials.

An Enhanced Phenomenological Model for Surface-based Localised Corrosion of Magnesium Alloys

P. McHugh, T. Vaughan, A. Kopp, 2022 .

Nanoindentation of solvent-cast and compression-moulded poly(lactic-co-glycolic acid) to determine elastic modulus and hardness

Reyhaneh Neghabat Shirazi, P. McHugh, Y. Rochev, 2016 .

Nanomechanical properties of poly(lactic-co-glycolic) acid film during degradation.

Reyhaneh Neghabat Shirazi, Fawaz Aldabbagh, Andrea Erxleben, 2014, Acta biomaterialia.

A LIQUID PHASE SINTERING MODEL: APPLICATION TO Si3N4 AND WC-Co

H. Riedel, P. McHugh, 1997 .

Micromechanical investigation of the fatigue crack growth behaviour of Al–SiC MMCs

P. McHugh, M. Bruzzi, 2004 .

Sustained release of targeted cardiac therapy with a replenishable implanted epicardial reservoir

Reyhaneh Neghabat Shirazi, Claudia E. Varela, C. Walsh, 2018, Nature Biomedical Engineering.

Investigating the Mechanical Behavior of Clot Analogues Through Experimental and Computational Analysis

P. McHugh, J. McGarry, Sarah Johnson, 2020, Annals of Biomedical Engineering.

Investigating the Mechanical Behavior of Clot Analogues Through Experimental and Computational Analysis

P. McHugh, P. McGarry, J. McGarry, 2020, Annals of Biomedical Engineering.

Real-time ultrasound in the diagnosis of congenital dislocation and dysplasia of the hip.

P. McHugh, H. Harcke, G. Macewen, 1985, The Journal of bone and joint surgery. British volume.

Liposomal surface coatings of metal stents for efficient non-viral gene delivery to the injured vasculature.

V. Barron, Wenxin Wang, P. McHugh, 2013, Journal of controlled release : official journal of the Controlled Release Society.

The role of elastic anisotropy, length scale and crystallographic slip in fatigue crack nucleation

Caoimhe A. Sweeney, S. Leen, P. McHugh, 2013 .

Development of a novel bioreactor to apply shear stress and tensile strain simultaneously to cell monolayers

Kevin B. Heraty, Nathan J. Quinlan, Peter E. McHugh, 2006 .

Strain-gradient modelling of grain size effects on fatigue of CoCr alloy

Caoimhe A. Sweeney, S. Leen, P. McHugh, 2014 .

Micromechanical methodology for fatigue in cardiovascular stents

Sean B. Leen, Caoimhe A. Sweeney, Peter E. McHugh, 2012 .

Determination of elastic and plastic material properties using indentation: Development of method and application to a thin surface coating

P. McHugh, L. Farrissey, 2005 .

An atomistic study of void growth in single crystalline copper

Peter E. McHugh, Siegfried Schmauder, S. Schmauder, 2000 .

Modelling of creep in a Ni base superalloy using a single crystal plasticity model

Peter E. McHugh, P. McHugh, R. Mohrmann, 1997 .

Computational modeling of metal matrix composite materials—IV. Thermal deformations

Peter E. McHugh, C. F. Shih, R. J. Asaro, 1993 .

Chapter 8 – Crystal Plasticity Models

Robert J. Asaro, Peter E. McHugh, P. McHugh, 1993 .

A novel flow chamber for biodegradable alloy assessment in physiologically realistic environments.

P E McHugh, G Dubini, F. Migliavacca, 2013, The Review of scientific instruments.

HUVEC ICAM-1 and VCAM-1 Synthesis in Response to Potentially Athero-Prone and Athero-Protective Mechanical and Nicotine Chemical Stimuli

P. McHugh, B. Murphy, Liam T. Breen, 2010, Annals of Biomedical Engineering.

Computational micromechanics of bioabsorbable magnesium stents.

P E McHugh, S. Leen, P. McHugh, 2014, Journal of the mechanical behavior of biomedical materials.

Strain on the human sciatic nerve in vivo during movement of the hip and knee.

P. Fleming, P. McHugh, J. McCabe, 2003, The Journal of bone and joint surgery. British volume.

A Review of Material Degradation Modelling for the Analysis and Design of Bioabsorbable Stents

Caoimhe A. Sweeney, Peter E. McHugh, Enda L. Boland, 2015, Annals of Biomedical Engineering.

A Review of Material Degradation Modelling for the Analysis and Design of Bioabsorbable Stents

Caoimhe A. Sweeney, Enda L. Boland, P. McHugh, 2015, Annals of Biomedical Engineering.

An ovine in vivo framework for tracheobronchial stent analysis

Donnacha J McGrath, P. McHugh, S. Jockenhoevel, 2017, Biomechanics and Modeling in Mechanobiology.

Vertebral osteoporosis and trabecular bone quality.

P. McHugh, D. O’Mahoney, P. McDonnell, 2007, Annals of biomedical engineering.

Bioreactors for Cardiovascular Cell and Tissue Growth: A Review

P. E. McHugh, V. Barron, V. Barron, 2003, Annals of Biomedical Engineering.

Effects of electrical stimulation on lymphatic flow and limb volume in the rat.

P. McHugh, S. Tepper, J. Dean, 1994, Physical therapy.

Micromechanical modelling of cortical bone

P. McHugh, J. McGarry, L. Mullins, 2007, Computer methods in biomechanics and biomedical engineering.

Endothelial cell response to biomechanical forces under simulated vascular loading conditions.

P E McHugh, V Barron, V. Barron, 2007, Journal of biomechanics.

“Weber B” bilateral malleolus fracture and interfragmentary screw placement: a cadaveric study

P. McHugh, K. Kaar, R. Thakral, 2006, European Journal of Orthopaedic Surgery & Traumatology.

Evaluation of cover effects on bare stent mechanical response.

U. Steinseifer, P. E. McHugh, Donnacha J McGrath, 2016, Journal of the mechanical behavior of biomedical materials.

X-ray micro-tomography of a coronary stent deployed in a model artery.

Faisal Sharif, Thomas Connolley, J. Buffière, 2007, Medical engineering & physics.

Coronary Stent Strut Size Dependent Stress–Strain Response Investigated Using Micromechanical Finite Element Models

P. E. McHugh, P. McHugh, B. Murphy, 2004, Annals of Biomedical Engineering.

Early results and lessons learned using the streamliner multilayer flow modulator in the management of complex thoracoabdominal aortic aneurysms and chronic symptomatic aortic dissection

P. McHugh, S. Sultan, N. Hynes, 2020 .

Computational Investigation of the Delamination of Polymer Coatings During Stent Deployment

P. McHugh, J. McGarry, C. Hopkins, 2010, Annals of Biomedical Engineering.

Computational Bench Testing to Evaluate the Short-Term Mechanical Performance of a Polymeric Stent

P. McHugh, J. Sarasua, W. Wang, 2015, Cardiovascular Engineering and Technology.

Computational Bench Testing to Evaluate the Short-Term Mechanical Performance of a Polymeric Stent

A C Bobel, S Petisco, J R Sarasua, 2015, Cardiovascular Engineering and Technology.

A Computational Test-Bed to Assess Coronary Stent Implantation Mechanics Using a Population-Specific Approach

Claire Conway, Peter E. McHugh, Faisal Sharif, 2012 .

Biomodels of Bone: A Review

S. Lohfeld, V. Barron, P. E. McHugh, 2005, Annals of Biomedical Engineering.

Improving the finite element model accuracy of tissue engineering scaffolds produced by selective laser sintering

P E McHugh, P. McHugh, S. Cahill, 2015, Journal of Materials Science: Materials in Medicine.

Computational modelling of the extrusion of an Al-SiC metal matrix composite using macroscale and microscale methods

P. McHugh, D. Ilie, J. McGarry, 2007 .

Endovascular versus open surgical repair for complicated chronic type B aortic dissection

P. McHugh, E. Kavanagh, S. Sultan, 2018 .

Implant system for large osteochondral defects.

P. McHugh, S. Lohfeld, W. Curtin, 2022, Bone.

Comparison of trabecular bone behavior in core and whole bone samples using high-resolution modeling of a vertebral body

P. McHugh, N. Harrison, 2010, Biomechanics and modeling in mechanobiology.

Electro-mechanical response of a 3D nerve bundle model to mechanical loads leading to axonal injury

Maeve Duffy, Peter McHugh, Michel Destrade, 2017, 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

Neurotrauma evaluation in a 3D electro-mechanical model of a nerve bundle

I. Cinelli, M. Destrade, M. Duffy, 2017, 2017 8th International IEEE/EMBS Conference on Neural Engineering (NER).

Effects of nerve bundle geometry on neurotrauma evaluation

I. Cinelli, Maeve Duffy, Michel Destrade, 2017, 2017 8th International IEEE/EMBS Conference on Neural Engineering (NER).

Comparison of the implicit and explicit finite element methods using crystal plasticity

Peter E. McHugh, Frank Harewood, P. McHugh, 2007 .

In Vitro Clot Modeling and Clinical Applications

P. McHugh, J. Chueh, M. Gounis, 2021 .

Micro–macro wear–fatigue of modular hip implant taper-lock coupling

Teng Zhang, S. Leen, P. McHugh, 2014 .

Experimental characterisation for micromechanical modelling of CoCr stent fatigue.

Sean B. Leen, Caoimhe A. Sweeney, Peter E. McHugh, 2014, Biomaterials.

Characterisation of a collagen membrane for its potential use in cardiovascular tissue engineering applications

V. Barron, E. O’Cearbhaill, P. McHugh, 2006, Journal of materials science. Materials in medicine.

A Dual-VENC Four-Dimensional Flow MRI Framework for Analysis of Subject-Specific Heterogeneous Nonlinear Vessel Deformation

Peter E. McHugh, Sherif Sultan, Niamh Hynes, 2020 .

Experimental mechanical testing of Poly (l-Lactide) (PLLA) to facilitate pre-degradation characteristics for application in cardiovascular stenting

Stefan Lohfeld, Reyhaneh Neghabat Shirazi, Peter E. McHugh, 2016 .

Differences in the Crack Resistance of Interstitial, Osteonal and Trabecular Bone Tissue

P. McHugh, L. Mullins, M. Bruzzi, 2009, Annals of Biomedical Engineering.

Evaluation of Human Endothelial Cells Post Stent Deployment in a Cardiovascular Simulator In Vitro

V. Barron, E. O’Cearbhaill, J. N. Mackle, 2009, Annals of Biomedical Engineering.

The effect of physiological cyclic stretch on the cell morphology, cell orientation and protein expression of endothelial cells

V. Barron, P. McHugh, D. O’Mahoney, 2007, Journal of materials science. Materials in medicine.

Finite element implementation of multiaxial continuum damage mechanics for plain and fretting fatigue

Sean B. Leen, Peter E. McHugh, S. Leen, 2012 .

Micromechanical modelling of ductile crack growth in the binder phase of WC–Co

Peter E. McHugh, P. McHugh, P. J. Connolly, 2003 .

Fracture modelling of WC-Co hardmetals using crystal plasticity theory and the Gurson model

Peter E. McHugh, P. McHugh, P. Connolly, 1999 .

Modelling the degradation and elastic properties of poly(lactic-co-glycolic acid) films and regular open-cell tissue engineering scaffolds.

Reyhaneh Neghabat Shirazi, William Ronan, Yury Rochev, 2016, Journal of the mechanical behavior of biomedical materials.

Anterior cruciate ligament graft tensioning. Is the maximal sustained one-handed pull technique reproducible?

P. McHugh, W. Curtin, F. Byrne, 2011, BMC Research Notes.

A MULTISCALE APPROACH TO FAILURE ASSESSMENT IN DEPLOYMENT FOR CARDIOVASCULAR STENTS

Peter E. McHugh, James A. Grogan, Frank Harewood, 2010 .

Mechanical Stimulation of Bone Marrow In Situ Induces Bone Formation in Trabecular Explants

G. Niebur, P. McHugh, L. McNamara, 2015, Annals of Biomedical Engineering.

Prediction of Changes in Cell-substrate Contact under Cyclic Substrate Deformation Using Cohesive Zone Modelling

P. McHugh, J. McGarry, B. Murphy, 2006 .

Gefitinib/gefitinib microspheres loaded polyurethane constructs as drug‐eluting stent coating

Donnacha J McGrath, U. Steinseifer, P. McHugh, 2017, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Analysis of the mechanical performance of a cardiovascular stent design based on micromechanical modelling

Peter E. McHugh, J. P. McGarry, P. McHugh, 2004 .

Characterization of strut indentation during mechanical thrombectomy in acute ischemic stroke clot analogs

E. Roche, P. McHugh, P. Mordasini, 2019, Journal of NeuroInterventional Surgery.

A method to fabricate small features on scaffolds for tissue engineering via selective laser sintering

Stefan Lohfeld, Valerie Barron, Peter E. McHugh, 2010 .

Investigation of the failure behaviour of vertebral trabecular architectures under uni-axial compression and wedge action loading conditions.

P. McHugh, N. Harrison, P. McDonnell, 2010, Medical engineering & physics.

Generation of a finite element model of the thoracolumbar spine.

M A Tyndyka, V Barron, P E McHugh, 2007, Acta of bioengineering and biomechanics.

Medical Stents: State of the Art and Future Directions

A. Barakat, P. McHugh, S. McGinty, 2016, Annals of Biomedical Engineering.

Finite element comparison of performance related characteristics of balloon expandable stents

M. S. Bruzzi, P. E. McHugh, P. McHugh, 2007, Computer methods in biomechanics and biomedical engineering.

Local and regional mechanical characterisation of a collagen-glycosaminoglycan scaffold using high-resolution finite element analysis.

M G Haugh, P E McHugh, F. O'Brien, 2010, Journal of the mechanical behavior of biomedical materials.

A prediction of cell differentiation and proliferation within a collagen-glycosaminoglycan scaffold subjected to mechanical strain and perfusive fluid flow.

M Browne, P E McHugh, F. O'Brien, 2010, Journal of biomechanics.

A Finite Element Prediction of Cellular Strain in a GAG-Scaffold

P. Prendergast, P. McHugh, D. O’Mahoney, 2007 .

Behavior of Human Mesenchymal Stem Cells in Fibrin-Based Vascular Tissue Engineering Constructs

V. Barron, E. O’Cearbhaill, F. Barry, 2010, Annals of Biomedical Engineering.

The influence of grain size on the ductility of micro-scale stainless steel stent struts

T Connolley, P E McHugh, P. McHugh, 2006, Journal of materials science. Materials in medicine.

Micromechanical Modeling of the Static Loading of an Al 359-SiC MMC

P. McHugh, M. Bruzzi, 2005 .

Micromechanical modelling of the static and cyclic loading of an Al 2124-SiC MMC

M. S. Bruzzi, Peter E. McHugh, P. McHugh, 2001 .

COMPUTATIONAL MODELING OF Al-Cu MATRIX, SiC REINFORCED COMPOSITE MATERIALS

P. McHugh, C. Shih, R. Asaro, 1992 .

Preclinical trial of a novel surface architecture for improved primary fixation of cementless orthopaedic implants.

F. Quondamatteo, P. McHugh, N. Harrison, 2014, Clinical biomechanics.

Computational modeling of metal matrix composite materials—III. Comparisons with phenomenological models

Peter E. McHugh, C. F. Shih, R. J. Asaro, 1993 .

Evaluating the interaction of a tracheobronchial stent in an ovine in-vivo model

Donnacha J McGrath, P. McHugh, S. Jockenhoevel, 2017, Biomechanics and Modeling in Mechanobiology.

Evaluating the effect of increasing ceramic content on the mechanical properties, material microstructure and degradation of selective laser sintered polycaprolactone/β-tricalcium phosphate materials.

Stefan Lohfeld, Heather Doyle, P. McHugh, 2015, Medical engineering & physics.

Computational Analysis of the Utilisation of the Shape Memory Effect and Balloon Expansion in Fully Polymeric Stent Deployment

P. McHugh, A. Bobel, 2017, Cardiovascular Engineering and Technology.

Comparison of computational modelling techniques for braided stent analysis

Kathrin Kurtenbach, Caoimhe A. Sweeney, Nicola Kelly, 2019, Computer methods in biomechanics and biomedical engineering.

Computer Simulation of the Mechanical Behaviour of Implanted Biodegradable Stents in a Remodelling Artery

Claire Conway, Peter E. McHugh, Enda L. Boland, 2016 .

Fabrication, mechanical and in vivo performance of polycaprolactone/tricalcium phosphate composite scaffolds.

V. Barron, P. McHugh, L. Dürselen, 2012, Acta biomaterialia.

Predicting the Effects of Overloads on Fatigue Crack Growth in an Al-SiC MMC Using a Computational Model

P. McHugh, M. Bruzzi, 2004 .

A combined computational and experimental methodology to determine the adhesion properties of stent polymer coatings

P. McHugh, J. McGarry, Y. Rochev, 2013 .

Computational modeling of metal matrix composite materials—II. Isothermal stress-strain behavior

Peter E. McHugh, C. F. Shih, R. J. Asaro, 1993 .

Laser sintering for the fabrication of tissue engineering scaffolds.

P. McHugh, S. Lohfeld, 2012, Methods in molecular biology.

Polymer-coated microparticle scaffolds engineered for potential use in musculoskeletal tissue regeneration

M. Detamore, P. McHugh, N. Mohan, 2021, Biomedical materials.

Profiling the Shear Stress of Atherosclerosis; A Genomic View

V. Barron, P. McHugh, B. Murphy, 2004 .

Predicting localised corrosion and mechanical performance of a PEO surface modified rare earth magnesium alloy for implant use through in-silico modelling

P. McHugh, F. Benn, T. Vaughan, 2023, Bioactive materials.

An Experimental and Computational Investigation of Bone Formation in Mechanically Loaded Trabecular Bone Explants

G. Niebur, P. McHugh, L. McNamara, 2016, Annals of Biomedical Engineering.

Evaluation of a Multiscale Modelling Methodology to Predict the Mechanical Properties of PCL/β-TCP Sintered Scaffold Materials

P. McHugh, S. Lohfeld, P. McDonnell, 2015, Annals of Biomedical Engineering.

Hip Strain on the human sciatic nerve in vivo during movement of the hip and knee

P. Fleming, P. McHugh, J. McCabe, 2004 .

Authors' response to "comments on 'measurement of the microstructural fracture toughness of cortical bone using indentation fracture'".

P. McHugh, L. Mullins, M. Bruzzi, 2008, Journal of biomechanics.

Computational Modelling of the Mechanics of Trabecular Bone and Marrow Using Fluid Structure Interaction Techniques

G. Niebur, P. McHugh, L. McNamara, 2013, Annals of Biomedical Engineering.

Nitinol stent design - understanding axial buckling.

P E McHugh, Donnacha J McGrath, P. McHugh, 2014, Journal of the mechanical behavior of biomedical materials.

A Methodology for

James H. Lambert, Robert C. Patev, Joshua L. Tsang, 2000 .

A Computational Test-Bed to Assess Coronary Stent Implantation Mechanics Using a Population-Specific Approach

P. McHugh, J. McGarry, C. Conway, 2012, Cardiovascular Engineering and Technology.

The role of plasticity in combined torsion and bending of elastic–plastic guidewires

P. McHugh, Marie Clancy, W. Ronan, 2021 .

Webbing and Delamination of Drug Eluting Stent Coatings

Caoimhe A. Sweeney, P. McHugh, J. McGarry, 2015, Annals of Biomedical Engineering.

Sustained release of targeted cardiac therapy with a replenishable implanted epicardial reservoir

Claudia E. Varela, C. Walsh, E. Roche, 2018, Nature Biomedical Engineering.

Gene-eluting stents: non-viral, liposome-based gene delivery of eNOS to the blood vessel wall in vivo results in enhanced endothelialization but does not reduce restenosis in a hypercholesterolemic model

F. Barry, P. McHugh, U. Greiser, 2011, Gene Therapy.

A prediction of cell differentiation and proliferation within a collagen-glycosaminoglycan scaffold subjected to mechanical strain and perfusive fluid flow.

F. O'Brien, P. McHugh, M. Browne, 2010, Journal of biomechanics.

Failure modelling of trabecular bone using a non-linear combined damage and fracture voxel finite element approach

P. McHugh, N. Harrison, D. O’Mahoney, 2012, Biomechanics and Modeling in Mechanobiology.

uantifying shoulder rotation weakness in patients with houlder impingement

P. McHugh, S. Nicholas, Rachael C. Nahow, 2005 .

A comparison of two quasi‐static computational models for assessment of intra‐myocardial injection as a therapeutic strategy for heart failure

Claudia E Varela, Yiling Fan, Claudia E. Varela, 2019, International journal for numerical methods in biomedical engineering.

Endovascular versus conventional open surgical repair for thoracoabdominal aortic aneurysms

P. McHugh, E. Kavanagh, S. Sultan, 2018 .

Computational modelling of the mechanical performance of nitinol guidewires in an idealised tortuous path for medical device applications

Donnacha J McGrath, P. McHugh, Marie Clancy, 2023, European Journal of Mechanics - A/Solids.

Osteogenic differentiation of mesenchymal stem cells is regulated by osteocyte and osteoblast cells in a simplified bone niche.

G. Niebur, G. Shaw, P. McHugh, 2012, European cells & materials.

The effect of physiological cyclic stretch on the cell morphology, cell orientation and protein expression of endothelial cells

V. Barron, P. McHugh, D. O’Mahoney, 2007, Journal of materials science. Materials in medicine.

Comparison of Covered Laser-cut and Braided Respiratory Stents: From Bench to Pre-Clinical Testing

Caoimhe A. Sweeney, Donnacha J McGrath, P. McHugh, 2019, Annals of Biomedical Engineering.