J. Lamon

发表

Thermomechanical properties of carbon fibres at high temperatures (up to 2000 °C)

C. Sauder, J. Lamon, R. Pailler, 2002 .

The tensile behavior of carbon fibers at high temperatures up to 2400 °C

C. Sauder, J. Lamon, R. Pailler, 2004 .

Probabilistic Failure Predictions in Brittle Material Under Multiaxial Loading

J. Lamon, 1994 .

Statistical analysis of failure of SiC fibres in the presence of bimodal flaw populations

J. Lamon, N. Lissart, 1997 .

A new inverse approach for the localization and characterization of defects based on compressive experiments

Olivier Allix, Federica Daghia, Jacques Lamon, 2016 .

Investigation of subcritical crack growth using load relaxation tests on fiber bundles

J. Lamon, M. R'mili, 2011 .

Damage Induced Evolution of the Thermal Diffusivity of SiC/SiC Composite

J. Lamon, J. Batsale, J. E. Yagoubi, 2014 .

An approach to the mechanical behaviour of SiC/SiC and C/SiC ceramic matrix composites

J. Lamon, E. Inghels, 1991 .

Micro/minicomposites: a useful approach to the design and development of non-oxide CMCs

J. Lamon, R. Pailler, X. Bourrat, 1999 .

Review: creep of fibre-reinforced ceramic matrix composites

J. Lamon, 2019, International Materials Reviews.

Analyses of fiber push-out tests performed on Nicalon/SiC composites with tailored interfaces

F. Rebillat, J. Lamon, E. Lara‐Curzio, 1995 .

Multilayerd Interphases in SiC/SiC Composites: Influence of the Interfacial Bond Strength on the Interfacial Characteristics

F. Rebillat, J. Lamon, R. Naslain, 1998 .

Properties of Multilayered Interphases in SiC/SiC Chemical‐Vapor‐Infiltrated Composites with “Weak” and “Strong” Interfaces

F. Rebillat, J. Lamon, E. Lara‐Curzio, 2005 .

Interface Properties in High‐Strength Nicalon/C/SiC Composites, As Determined by Rough Surface Analysis of Fiber Push‐Out Tests

F. Rebillat, J. Lamon, T. Parthasarathy, 2005 .

Interfacial Bond Strength in SiC/C/SiC Composite Materials, As Studied by Single-Fiber Push-Out Tests

F. Rebillat, J. Lamon, E. Lara‐Curzio, 2005 .

Fiber—Matrix Interface Properties of Single‐Fiber Microcomposites as Measured by Fiber Pushin Tests

F. Rebillat, J. Lamon, R. Kerans, 2005 .

Brittle Fracture and Damage of Brittle Materials and Composites: Statistical-Probabilistic Approaches

Jacques Lamon, J. Lamon, 2016 .

Approach to microstructure-behavior relationships for ceramic matrix composites reinforced by continuous fibers

J. Lamon, 2014 .

Fracture statistics applied to modelling the non-linear stress-strain behavior in microcomposites: Influence of interfacial parameters

J. Lamon, L. Guillaumat, 1996 .

Influence of Interfaces and Interphases on the Mechanical Behavior of Fiber‐Reinforced Ceramic Matrix Composites

J. Lamon, 2014 .

Chemical Vapor Infiltrated SiC/SiC Composites (CVI SiC/SiC)

J. Lamon, 2005 .

Analysis of crack deviation in ceramic matrix composites and multilayers based on the Cook and Gordon mechanism

J. Lamon, S. Pompidou, 2007 .

The influence of the interphase and associated interfaces on the deflection of matrix cracks in ceramic matrix composites

J. Lamon, N. Carrère, É. Martin, 2000 .

Development of Magnesium Alloy Scaffolds to Support Biological Myocardial Grafts: A Finite Element Investigation

P. Wriggers, H. Maier, J. Lamon, 2015 .

Stochastic models of fragmentation of brittle fibers or matrix in composites

J. Lamon, 2010 .

Influence of Strong Fiber/Coating Interfaces on the Mechanical Behavior and Lifetime of Hi‐Nicalon/(PyC/SiC)n/SiC Minicomposites

J. Lamon, R. Pailler, S. Bertrand, 2001 .

Hi‐Nicalon/SiC Minicomposites with (Pyrocarbon/SiC)n Nanoscale Multilayered Interphases

J. Lamon, R. Pailler, S. Bertrand, 1999 .

Probabilistic-statistical simulation of the non-linear mechanical behavior of a woven SiC/SiC composite

J. Lamon, L. Guillaumat, 1996 .

Microcomposite Test Procedure for Evaluating the Interface Properties of Ceramic Matrix Composites

F. Rebillat, A. Evans, J. Lamon, 1995 .

Importance of fiber / matrix bonding in SiC / BN / SiC on mechanical and interfacial properties

F. Rebillat, J. Lamon, A. Guette, 2022 .

Creep behaviour of a SiC/Si-B-C composite with a self-healing multilayered matrix

J. Lamon, P. Carrère, 2003 .

Micromechanics-Based Evaluation of Interfaces in Ceramic Matrix Composites

J. Lamon, S. Pompidou, 2006 .

Investigation of Specimen Size Effects on P-Quantile Diagrams and Normal Distributions of Critical Flaw Strengths in Fiber Tows

J. Lamon, M. R'mili, 2022, Journal of Composites Science.

Model of the Nonlinear Mechanical Behavior of 2D SiC–SiC Chemical Vapor Infiltration Composites

O. Allix, J. Lamon, X. Aubard, 1994 .

Multiscale Thermal Characterization of Mechanically Loaded Ceramic Matrix Composite

J. Lamon, J. Batsale, J. Dhote, 2015, Experimental Mechanics.

In situ fibre strength determination in metal matrix composites

Eric Martin, G. Rousset, Jacques Lamon, 2009 .

Tensile Creep Behavior of SiC-Based Fibers With a Low Oxygen Content

C. Sauder, J. Lamon, 2007 .

Statistical flaw strength distributions for glass fibres: correlation between bundle test and AFM-derived flaw size density functions

J. Lamon, G. Foray, M. R'mili, 2012 .

Ceramic Matrix Composites: Materials, Modeling and Technology

J. Lamon, N. Bansal, 2014 .

Single‐ and Multilayered Interphases in SiC/SiC Composites Exposed to Severe Environmental Conditions: An Overview

J. Lamon, R. Pailler, R. Naslain, 2009 .

Statistical Approaches to Failure for Ceramic Reliability Assessment

Jacques Lamon, J. Lamon, 1988 .

High Temperature Ceramic Materials and Composites

J. Lamon, W. Krenkel, 2010 .

Prediction of elastic properties of carbon fibers and CVI matrices

C. Sauder, J. Lamon, 2005 .

Tensile static fatigue of 2D SiC/SiC composites with multilayered (PyC–SiC)n interphases at high temperatures in oxidizing atmosphere

J. Lamon, S. Pasquier, R. Naslain, 1998 .

SiC/SiC minicomposites with nanoscale multilayered fibre coatings

J. Lamon, R. Pailler, S. Bertrand, 2001 .

The concept of a strong interface applied to SiC/SiC composites with a BN interphase

Jacques Lamon, F. Rebillat, J. Lamon, 2000 .

Damage monitoring and identification in SiC/SiC minicomposites using combined acousto-ultrasonics and acoustic emission

Pascal Reynaud, Nathalie Godin, Emmanuel Maillet, 2014 .

A micromechanics-based approach to the mechanical behavior of brittle-matrix composites

Jacques Lamon, J. Lamon, 2001 .

Oxidation of Silicon Carbide Fibers During Static Fatigue in Air at Intermediate Temperatures

J. Lamon, R. Pailler, F. Pailler, 2009 .

An approach to the mechanical behaviour of SiC/SiC and C/SiC ceramic matrix composites

J. Lamon, E. Inghels, 1991 .

Micromechanics based model of fatigue/oxidation for ceramic matrix composites

J. Lamon, F. Pailler, 2005 .

Influence of Interface Characteristics on the Mechanical Properties of Hi‐Nicalon type‐S or Tyranno‐SA3 Fiber‐Reinforced SiC/SiC Minicomposites

C. Sauder, J. Lamon, A. Brusson, 2010 .

Interfacial behavior of microcomposites during creep at elevated temperatures

R. E. Tressler, J. Lamon, K. Rugg, 1999 .

Analysis of Acoustic Emission energy release during static fatigue tests at intermediate temperatures on Ceramic Matrix Composites: Towards rupture time prediction

Pascal Reynaud, Nathalie Godin, Emmanuel Maillet, 2012 .

Stochastic approach to multiple cracking in composite systems based on the extreme-values theory

Jacques Lamon, J. Lamon, 2009 .

Delayed Failure of Hi‐Nicalon and Hi‐Nicalon S Multifilament Tows and Single Filaments at Intermediate Temperatures (500°–800°C)

Jacques Lamon, J. Lamon, W. Gauthier, 2009 .

Delayed Failure at Intermediate Temperatures (600°–700°C) in Air in Silicon Carbide Multifilament Tows

Jacques Lamon, J. Lamon, Philippe Forio, 2004 .

Real-time evaluation of energy attenuation: A novel approach to acoustic emission analysis for damage monitoring of ceramic matrix composites

Pascal Reynaud, Nathalie Godin, Emmanuel Maillet, 2014 .

Fracture Toughness of 2‐D Woven SiC/SiC CVI‐Composites with Multilayered Interphases

Jacques Lamon, J. Lamon, Christine Droillard, 1996 .

Strong Interface in CMC s , a Condition for Efficient Multilayered Interphases

J. Lamon, X. Bourrat, C. Droillard, 1994 .

Thermal residual stresses in ceramic matrix composites—I. Axisymmetrical model and finite element analysis

J. Lamon, J. Bobet, 1995 .

Characterization of fibre/matrix interfaces in carbon/carbon composites

J. Lamon, R. Pailler, S. Jouannigot, 2009 .

Multiscale Thermal Characterization of Mechanically Loaded Ceramic Matrix Composite

J. Lamon, J. Batsale, J. Dhote, 2015 .

Fatigue Behavior at High Temperatures in Air of a 2D SiC/Si‐B‐C Composite with a Self‐Healing Multilayered Matrix

J. Lamon, P. Forio, 2012 .

Fatigue Behavior at High Temperature in Air of a 2D Woven SiC/SiBC with a Self Healing Matrix

J. Lamon, P. Carrère, 1998 .

An approach to the mechanical behaviour of SiC/SiC and C/SiC ceramic matrix composites

J. Lamon, E. Inghels, 1991 .

Tensile creep behaviour of a silicon carbide-based fibre with a low oxygen content

J. Lamon, X. Bourrat, R. Naslain, 1995, Journal of Materials Science.

Damage and failure mechanisms of a3-directional carbon/carbon composite under uniaxial tensile and shear loads

Jacques Lamon, J. Lamon, O. Siron, 1998 .

Damage and failure in ceramic matrix minicomposites: Experimental study and model

J. Lamon, N. Lissart, 1997 .

The tensile properties of carbon matrices at temperatures up to 2200 °C

C. Sauder, J. Lamon, R. Pailler, 2005 .

Reinforcement of Ceramic Matrix Composites: Properties of SiC‐Based Filaments and Tows

J. Lamon, S. Mazerat, M. R'mili, 2014 .

Sliding friction of ceramics: Mechanical action of the wear debris

J. Lamon, J. Denape, 1990 .

High-temperature materials for power generation in gas turbines

J. Lamon, R. Vaßen, N. Padture, 2020 .

Optimisation of Components

D. R. Hayhurst, G. W. Greenwood, Malcolm S. Loveday, 1989 .

Direct comparison between monofilament and multifilament tow testing for evaluating the tensile strength distribution of SiC fibers

J. Lamon, I. Davies, T. Ogasawara, 2021, Journal of the European Ceramic Society.

Investigation of flaw strength distributions from tensile force-strain curves of fiber tows

J. Lamon, M. R'mili, 2021 .

Failure of fiber bundles

Jacques Lamon, J. Lamon, V. Calard, 2004 .

The influence of internal defects on the mechanical behavior of filament wound SiC/SiC composite tubes under uniaxial tension

J. Lamon, E. Baranger, J. Braun, 2022, Journal of the European Ceramic Society.

Microstructural Stability and Creep Behavior of Si‐C‐O (Nicalon) Fibers in Carbon Monoxide and Argon Environments

R. E. Tressler, J. Lamon, R. Bodet, 2005 .

Reinforcement of ceramic matrix composites by ceramic continuous fibers

J. Lamon, 2021 .

Properties and Characteristics of SiC and SiC/SiC Composites

J. Lamon, 2020, Comprehensive Nuclear Materials.

2.12 – Properties and Characteristics of SiC and SiC/SiC Composites

J. Lamon, 2012 .

Creep of SiC-SiC microcomposites

R. E. Tressler, C. Bakis, J. Lamon, 1999 .

Damage and failure of SiC fiber tows during environment activated slow crack growth: Residual behavior and Strength-Probability-Time diagrams

J. Lamon, M. R'mili, 2017 .

(PyC/SiC)n and (BN/SiC)n Nanoscale-Multilayered Interphases by Pressure Pulsed-CVI

J. Lamon, R. Pailler, O. Boisron, 1998 .

Static Fatigue of SiC/SiC Minicomposites at High Temperatures Up to 1200 °C in Air: Multiscale Approach

J. Lamon, A. Laforêt, 2021, Journal of Composites Science.

Static Fatigue of SiC Multifilament Tows at Temperatures up to 1200 °C in Air

J. Lamon, 2019, Ceramics.

Resistance to Fatigue at Intermediate Temperatures in Air for SiC Hi‐Nicalon Fibers: Statistical Distributions of Lifetimes and Strength Degradation

J. Lamon, M. R'mili, 2012 .

High temperature ceramic matrix composites : HT-CMC1 : 6th European Conference on Composite Materials, 20-24 September 1993, Bordeaux

J. Lamon, R. Naslain, D. Doumeingts, 1993 .

Study of thermal residual stresses in ceramic matrix composites

J. Lamon, J. Bobet, 1997 .

Investigation of statistical distributions of fracture strengths for flax fibre using the tow-based approach

J. Lamon, H. Reveron, M. R'mili, 2016, Journal of Materials Science.

Sharp indentation behavior of carbon/carbon composites and varieties of carbon

J. Lamon, P. Kapsa, J. Loubet, 2002 .

A new inverse approach for the localization and characterization of defects based on compressive experiments

J. Lamon, F. Daghia, E. Barbarella, 2016, Computational Mechanics.

Flaw strength distributions and statistical parameters for ceramic fibers: the normal distribution.

J. Lamon, N. Godin, M. R'mili, 2012, Physical review. E, Statistical, nonlinear, and soft matter physics.

Determination of Elastic Moduli and Poisson Coefficient of Thin Silicon‐Based Joint Using Digital Image Correlation

F. Hild, J. Lamon, Matthieu Puyo‐Pain, 2008 .

Statistical-Probabilistic Approach to the Lifetime and Strength Degradation of E-Glass Filaments and Bundles under Constant Tensile Loading in Water

J. Lamon, M. R'mili, 2019, Journal of Composites Science.

Fiber Reinforced Ceramic Matrix Composites: A Probabilistic Micromechanics-Based Approach

J. Lamon, 2018 .

Investigation of the residual tensile behavior of fiber bundles after static fatigue: Implications for the prediction of durability of composites

J. Lamon, M. R'mili, 2014 .

Thermal Stress Failure of Ceramics under Repeated Rapid Heatings

Jacques Lamon, J. Lamon, David Pherson, 1991 .

Statistical Analysis of Bending Strengths for Brittle Solids: A Multiaxial Fracture Problem

Anthony G. Evans, Jacques Lamon, A. Evans, 1983 .

Determination of Fracture Toughness in 2‐D Woven SiC Matrix Composites Made by Chemical Vapor Infiltration

J. Lamon, C. Droillard, P. Voisard, 1995 .

Influence of an original manufacturing process on the properties and microstructure of SiC/SiC tubular composites

C. Sauder, J. Lamon, F. Balbaud-Célérier, 2019, Composites Part A: Applied Science and Manufacturing.

Improvement of silicon carbide fibers mechanical properties by Cl2 etching

J. Lamon, R. Pailler, S. Mazerat, 2018, Journal of the European Ceramic Society.

Tensile strength analysis and fractography on single nuclear grade SiC fibers at room temperature

J. Lamon, E. Baranger, C. Lorrette, 2023, Journal of Nuclear Materials.

Ceramics Reliability: Statistical Analysis of Multiaxial Failure Using the Weibull Approach and the Multiaxial Elemental Strength Model

J. Lamon, 1988 .

Probabilistic-statistical approach to matrix damage and stress–Strain behavior of 2-D woven SiC/SiC ceramic matrix composites

J. Lamon, B. Thommeret, C. Percevault, 1998 .

Statistical Analysis of the Ultimate Strength of Filaments, Tows and Minicomposites

J. Lamon, M. R'mili, 2023, Journal of Composites Science.

Probabilistic-statistical approach to the mechanical behavior of ceramic matrix composites(CMCs)

J. Lamon, 1999 .

Statistical Analysis of Fracture of Silicon Nitride (RBSN) Using the Short Span Bending Technique

J. Lamon, 1985 .

Experimental assessment of damage-thermal diffusivity relationship in unidirectional fibre-reinforced composite under axial tensile test

J. Lamon, J. Batsale, J. El Yagoubi, 2019, Acta Materialia.

Interfaces and interfacial mechanics : influence on the mechanical behavior of ceramic matrix composites (CMC)

J. Lamon, 1993 .

Modélisation non linéaire des effets de l'endommagement sur les propriétés thermiques d'un CMC unidirectionnel = Modelling the influence of damage on the thermal properties of ceramic matrix composites

J. Lamon, J. Batsale, J. E. Yagoubi, 2009 .

A Statistical-Probabilistic Approach to Microstructure-Structure Relations in Failure and Damage of Ceramic Composites

J. Lamon, N. Lissart, 1998 .

Modelling of the stress/strain behaviour of a carbon/carbon composite with a 2.5 dimensional fibre architecture under tensile and shear loads at room temperature

J. Lamon, O. Siron, J. Pailhès, 1999 .

Mechanical Properties of Hi‐NICALON S and SA3 Fiber Reinforced SiC/SiC Minicomposites

C. Sauder, J. Lamon, A. Brusson, 2009 .

Reliability Analysis of Ceramics Using the CERAM Computer Program

J. Lamon, 1990 .

Statistical Analysis of silicon Nitride (RBSN) Using the Short Span Bending Technique

J. Lamon, J. Lamon, 1988 .

Thermal Shock Behavior of Ceramics: Probabilistic Predictions of Failure and Damage

J. Lamon, 1993 .

STATIC FATIGUE OF MULTIFILAMENT TOWS AT HIGH TEMPERATURES ABOVE 900°C

J. Lamon, A. Laforêt, 2010 .

Prediction of ceramic matrix composites lifetime in high temperature static fatigue based on a probabilistic fracture mechanics model

J. Lamon, O. Loseille, 2008 .

A method for evaluating the thermal fatigue resistance of ceramics and its application to a fibre reinforced refractory material

J. Lamon, 1981 .

Ceramic reinforcements for composites

J. Lamon, 2011 .

A probabilistic statistical approach to the ultimate failure of ceramic-matrix composites—part II: macroscopic model

J. Lamon, V. Calard, 2002 .

3D Multiscale Modeling of the Mechanical Behavior of Woven Composite Materials

J. Lamon, É. Martin, G. Couégnat, 2010 .

Approche multiéchelle du comportement mécanique des matériaux composites à renfort tissé = Multiscale modelling of the mechanical behaviour of woven composite materials

J. Lamon, N. Carrère, É. Martin, 2009 .

Virtual testing applied to transverse multiple cracking of tows in woven ceramic composites

J. Lamon, P. Pineau, G. Couégnat, 2011 .

Multiscale Modelling of the Influence of Damage on the Thermal Properties of Ceramic Matrix Composites

J. Lamon, J. Batsale, J. El Yagoubi, 2010 .