P. Wright

发表

Mark R. Cutkosky, Paul K. Wright, John M. Jourdain, 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

Modeling manufacturing grips and correlations with the design of robotic hands

Mark R. Cutkosky, P. Wright, M. Cutkosky, 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

Interactive Design Exploration and Optimization Tools

S. McMains, P. Wright, 2022 .

Approximately Arc-Length Parametrized C3 Quintic Interpolatory Splines

Brian A. Barsky, P. K. Wright, Daniel C. H. Yang, 1999 .

for multiple applications Design of a network of robotic Lagrangian sensors for shallow water environments with case studies

A. Bayen, A. Tinka, P. Wright, 2013 .

Correlation of tool wear mechanisms with new slipline fields for cutting

A. Thangaraj, P. Wright, 1982 .

A Knowledge-Based System for Machining Operation Planning in Feature Based, Open-Architecture Manufacturing

P. Wright, J. Stori, 1996 .

of the TSP and it ’ s Variants 3 . 1 Traveling Salesman Problem

Roshan M. D'Souza, P. Wright, K. Castelino, 2002 .

Semiclassical generalization of the Darboux–Christoffel formula

R. Littlejohn, P. Wright, 2002 .

Sensing, smart and sustainable product development (S3 product) reference framework

Arturo Molina, Paul K. Wright, Vicente Borja, 2019, Int. J. Prod. Res..

Position sensing wrists for industrial manipulators

Mark R. Cutkosky, Paul K. Wright, M. Cutkosky, 1982 .

Abrasive Wear in Machining: Experiments With Materials of Controlled Microstructure

Paul K. Wright, S. Ramalingam, P. Wright, 1981 .

Principles of open-architecture manufacturing

Paul K. Wright, P. Wright, 1995 .

Sensing, smart and sustainable technologies for Agri-Food 4.0

Pedro Ponce, Arturo Molina, Paul K. Wright, 2019, Comput. Ind..

Friction, Stability and the Design of Robotic Fingers

Mark R. Cutkosky, Paul K. Wright, M. Cutkosky, 1986 .

Effect of Rake Face Design on Cutting Tool Temperature Distributions

Paul K. Wright, P. Wright, S. P. McCormick, 1980 .

Constant engagement tool path generation for convex geometries

Paul K. Wright, J. A Stori, P. Wright, 2000 .

The requirements specification of mechatronic products based-on the Integrated product, process and manufacturing development model

Paul K. Wright, Roberto Pérez Rodríguez, Jhonattan Miranda, 2018 .

Algorithms for the minimization of setups and tool changes in “simply fixturable” components in milling

Paul K. Wright, Sanjay E. Sarma, S. Sarma, 1996 .

Integrated Product, Process and Manufacturing System Development Reference Model to develop Cyber-Physical Production Systems - The Sensing, Smart and Sustainable Microfactory Case Study

Arturo Molina, Paul K. Wright, Vicente Borja, 2017 .

Automation and craftsmanship

David Alan Bourne, Paul K. Wright, D. Bourne, 1988 .

Testing and control of a compliant wrist

Mark R. Cutkosky, Paul K. Wright, John M. Jourdain, 1984 .

Open Architecture Controllers for Machine Tools, Part 2: A Real Time Quintic Spline Interpolator

Fu-Chung Wang, Paul K. Wright, P. Wright, 1998 .

A Remote Temperature Sensing Technique for Estimating the Cutting Interface Temperature Distribution

Paul K. Wright, P. Wright, D. Yen, 1986 .

Bimanual computer input and forearm support implemented and evaluated in an integrated system

Paul K. Wright, Daniel L. Odell, P. Wright, 2004 .

Rapid product realization from detail design

Paul K. Wright, Sanjay E. Sarma, Steven Schofield, 1996, Comput. Aided Des..

Wireless manufacturing: a literature review, recent developments, and case studies

George Q. Huang, Paul K. Wright, Stephen T. Newman, 2009 .

A methodology to create a sensing, smart and sustainable manufacturing enterprise

Arturo Molina, Paul K. Wright, Rafael Batres, 2018, Int. J. Prod. Res..

Body-tracking camera control for demonstration videos

Pei-Yu Chi, Björn Hartmann, Paul K. Wright, 2013, CHI Extended Abstracts.

Cyber-physical product manufacturing

Paul K. Wright, P. Wright, 2014 .

Green Manufacturing and Sustainable Manufacturing Partnership Title Software-based tool path evaluation for environmental sustainability

Paul K. Wright, David Dornfeld, Sushrut Pavanaskar, 2011 .

A quantification of dexterity

Paul K. Wright, Robert H. Sturges, P. Wright, 1989 .

On-Line Estimation of Tool/Chip Interface Temperatures for a Turning Operation

Paul K. Wright, J. G. Chow, Paul K. Wright, 1988 .

Manufacturing intelligence

David Alan Bourne, Paul K. Wright, D. Bourne, 1988 .

Toolglasses, Marking Menus, and Hotkeys: A Comparison of One and Two-Handed Command Selection Techniques

Paul K. Wright, Andrew Smith, Richard C. Davis, 2004, Graphics Interface.

Toolpath optimization for minimizing airtime during machining

Paul K. Wright, Roshan M. D’Souza, Roshan M. D'Souza, 2003 .

Zig-Zag Tool Path Generation for Sculptured Surface Finishing

Paul K. Wright, V. Sundararajan, Debananda Misra, 2003, Geometric and Algorithmic Aspects of Computer-Aided Design and Manufacturing.

Sensor Based Robots and Machine Tools for Flexible Manufacturing Cells

Paul K. Wright, P. Wright, 1985 .

The role of rapid prototyping in the product development process: A case study on the ergonomic factors of handheld video games

Paul K. Wright, Samuel M. Lopez, P. Wright, 2002 .

Rapidly Adaptable Plug-load Simulation for Evaluating Energy Curtailment Strategies

David E. Culler, Paul K. Wright, Jay Taneja, 2012 .

Fault Detection In Manufacturing Cells Based On Three-Dimensional Visual Information

David Alan Bourne, Paul K. Wright, Robert Milligan, 1982, Other Conferences.

The Effect of Run-Out on Design for Manufacturing in Micro-Machining Process

D. Dornfeld, P. Wright, Sung H. Ahn, 2001, Manufacturing Engineering.

Parameter Space Decomposition for Selection of the Axial and Radial Depth of Cut in Endmilling

Paul K. Wright, James A. Stori, P. Wright, 2001 .

Integration of Process Simulation in Machining Parameter Optimization

Paul K. Wright, James A. Stori, C. King, 1999 .

21st Century Manufacturing

Paul K. Wright, P. Wright, 2000 .

Further Developments in Applying the Finite Element Method to the Calculation of Temperature Distributions in Machining and Comparisons With Experiment

Paul K. Wright, J. G. Chow, M. G. Stevenson, 1983 .

Manufacturing — Its Evolution and Future

Paul K. Wright, David Dornfeld, M. Eugene Merchant, 2005 .

Intelligent Machine Tools: An Application of Neural Networks to the Control of Cutting Tool Performance

H. A. Epstein, P. K. Wright, P. Wright, 1991 .

Simulation-based cutting parameter selection for ball end milling

Paul K. Wright, Ganping Sun, P. Wright, 2005 .

Open Architecture Controllers for Machine Tools, Part 1: Design Principles

S. Schofield, Paul K. Wright, P. Wright, 1998 .

Drill wear sensing and failure prediction for untended machining

Paul K. Wright, A. Thangaraj, A. Thangaraj, 1988 .

Deformation Characteristics of Nickel Alloys During Machining

Paul K. Wright, J. G. Chow, P. Wright, 1982 .

A Step Towards Customized Product Realization: Methodology for Sensing, Smart and Sustainable Enterprise

Arturo Molina, Paul K. Wright, Rafael Batres, 2016, PRO-VE.

Volumetric feature recognition for machining components with freeform surfaces

Paul K. Wright, V. Sundararajan, P. Wright, 2004, Comput. Aided Des..

The CAD/CAM Interface: A 25-Year Retrospective

Jonathan Corney, Caroline C. Hayes, V. Sundararajan, 2005, J. Comput. Inf. Sci. Eng..

CyberCut: An Internet-based CAD/CAM System

Sara McMains, Carlo H. Séquin, Paul K. Wright, 2001, J. Comput. Inf. Sci. Eng..

Reference Free Part Encapsulation: A new universal fixturing concept

Paul K. Wright, Sanjay E. Sarma, S. Sarma, 1997 .

Head-mounted display efficacy study to aid first responder indoor navigation

Paul K. Wright, J Wilson, J. Wilson, 2009 .

Tool Path Planning Generation For Finish Machining of Freeform Surfaces in the Cybercut Process Planning Pipeline

Paul K. Wright, V. Sundararajan, David Dornfeld, 2007 .

A Process Monitoring System for Process-Based Product Validation

Paul K. Wright, Robert Hillaire, P. Wright, 2005 .

AMPS-An Automated Modular Process Planning System

Paul K. Wright, V. Sundararajan, Balaji Kannan, 2004, Journal of Computing and Information Science in Engineering.

Automated tool sequence selection for 3-axis machining of free-form pockets

Carlo H. Séquin, Paul K. Wright, Roshan M. D'Souza, 2004, Comput. Aided Des..

Handling Tool Holder Collision in Optimal Tool Sequence Selection for 2.5-D Pocket Machining

Carlo H. Séquin, Paul K. Wright, Roshan D'Souza, 2002, J. Comput. Inf. Sci. Eng..

Feature Based Macroplanning Including Fixturing

Paul K. Wright, V. Sundararajan, P. Wright, 2002, Journal of Computing and Information Science in Engineering.

Design tool for injection molded snap fits in consumer products

Paul K. Wright, John M. Brock, P. Wright, 2002 .

Applications of Software Engineering to Manufacturing Process Planning

Paul K. Wright, V. Sundararajan, P. Wright, 2008, J. Comput. Inf. Sci. Eng..

The manufacturing brain

David Alan Bourne, Paul K. Wright, D. Bourne, 1987 .

Efficient algorithms for automated process planning of 2.5D machined parts considering fixturing constraints

Paul K. Wright, Balaji Kannan, P. Wright, 2004, Int. J. Comput. Integr. Manuf..

Identification of Multiple Feature Representations by Volume Decomposition for 2.5-Dimensional Components

Paul K. Wright, V. Sundararajan, P. Wright, 2000 .

Automated microplanning for 2.5-D pocket machining

Carlo H. Séquin, Paul K. Wright, Roshan M. D’Souza, 2001 .

New Experiments on the Temperature Distribution in Drilling

Paul K. Wright, A. Thangaraj, A. Thangaraj, 1984 .

Correlation of Tempering Effects With Temperature Distribution in Steel Cutting Tools

Paul K. Wright, P. Wright, 1978 .

"TECHNOLOGY WEDGES" FOR IMPLEMENTING GREEN MANUFACTURING

Paul K. Wright, David Dornfeld, D. Dornfeld, 2007 .

Enabling Manufacturing Research through Interoperability

Athulan Vijayaraghavan, Paul K. Wright, David Dornfeld, 2009 .

CyberCut: A Coordinated Pipeline of Design, Process Planning and Manufacture

Paul K. Wright, V. Sundararajan, P. Wright, 2007 .

"TECHNOLOGY WEDGES" FOR IMPLEMENTING GREEN MANUFACTURING

Paul K. Wright, David Dornfeld, D. Dornfeld, 2007 .

Design of monocular head-mounted displays for increased indoor firefighting safety and efficiency

Daniel A. Steingart, Paul K. Wright, Andrew Redfern, 2005, SPIE Defense + Commercial Sensing.