Zheng Li

发表

Design optimization of stent and its dilatation balloon using kriging surrogate model

Tao Liu, Xue Wang, Aike Qiao, 2017, Biomedical engineering online.

Multi-objective optimization of coronary stent using Kriging surrogate model

Aike Qiao, Minjie Wang, Junfeng Gu, 2016, Biomedical engineering online.

Multi-Objective Optimizations of Biodegradable Polymer Stent Structure and Stent Microinjection Molding Process

Hongxia Li, Tao Liu, Minjie Wang, 2017, Polymers.

Pressure Analysis of Dynamic Injection Molding and Process Parameter Optimization for Reducing Warpage of Injection Molded Products

Hongxia Li, Minjie Wang, Junfeng Gu, 2017, Polymers.

A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion battery separator

Junfeng Gu, Zheng Li, Changyu Shen, 2018, High Performance Polymers.

Effect of injection velocity on the filling behaviors of microinjection-molded polylactic acid micropillar array product

Junfeng Gu, Zheng Li, Changyu Shen, 2019, The International Journal of Advanced Manufacturing Technology.

A Model accounting for Stiffness Weakening of Curvic Couplings under Various Loading Conditions

G. Cheng, Zheng Li, Shilun Ruan, 2020, Mathematical Problems in Engineering.

Influence of nanoscale surface curvature of rutile on fibronectin adsorption by atomistic simulations

Hongxia Li, Junfeng Gu, Zheng Li, 2017, Journal of Materials Science.

A Multiscale Simulation of Polymer Melt Injection Molding Filling Flow Using SPH Method with Slip-Link Model

Junfeng Gu, Zheng Li, Changyu Shen, 2022, Polymers.

Investigation on parallel algorithms in efficient global optimization based on multiple points infill criterion and domain decomposition

Junfeng Gu, Zheng Li, Xinyu Wang, 2016, Structural and Multidisciplinary Optimization.

A diversity metric based on Gaussian process model for diverse and competitive design

Gengdong Cheng, Zheng Li, Heng Liu, 2021, Structural and Multidisciplinary Optimization.

Investigation on parallel algorithms in efficient global optimization based on multiple points infill criterion and domain decomposition

Junfeng Gu, Shilun Ruan, Changyu Shen, 2016 .

Effect of shear on nucleation of carbon fiber reinforced polymer composites: Experiments and modeling

Junfeng Gu, Zheng Li, Changyu Shen, 2020 .

Effects of temperature and fiber orientation on the tensile behavior of short carbon fiber reinforced PEEK composites

Junfeng Gu, Zheng Li, Changyu Shen, 2020 .

Effect of injection velocity on the filling behaviors of microinjection-molded polylactic acid micropillar array product

Junfeng Gu, Zheng Li, Changyu Shen, 2019, The International Journal of Advanced Manufacturing Technology.

Multi-objective optimization design of injection molding process parameters based on the improved efficient global optimization algorithm and non-dominated sorting-based genetic algorithm

G. Cheng, Zheng Li, Shilun Ruan, 2015, The International Journal of Advanced Manufacturing Technology.

Three-dimensional topology optimization of thermal-fluid-structural problems for cooling system design

Xinyu Wang, Junfeng Gu, Minghao Yu, 2020, Structural and Multidisciplinary Optimization.

Efficient prediction of the effective nonlinear properties of porous material by FEM-Cluster based Analysis (FCA)

Yinghao Nie, Gengdong Cheng, Zheng Li, 2021 .

Elastohydrodynamic lubrication analysis of polymer‐on‐polymer artificial hip joint of CF / PEEK composite

Junfeng Gu, Zheng Li, Changyu Shen, 2021 .

Constitutive modeling for the accurate characterization of the tension behavior of PEEK under small strain

Junfeng Gu, Zheng Li, Changyu Shen, 2018, Polymer Testing.

Strengthening, toughening, and self‐healing for carbon fiber/epoxy composites based on PPESK electrospun coaxial nanofibers

Shuya Wei, Junfeng Gu, Zheng Li, 2021 .

An analytical model for temperature and crystalline evolution analysis of carbon fiber reinforced polymer composites during cooling

Junfeng Gu, Zheng Li, Changyu Shen, 2020 .

A novel crystallization kinetics model of transcrystalline used for crystallization behavior simulation of short carbon fiber‐reinforced polymer composites

Junfeng Gu, Zheng Li, Changyu Shen, 2018, Polymer Engineering & Science.

Non‐spherical shape optimization of artificial hip joint based on elastohydrodynamic lubrication analysis

Junfeng Gu, Zheng Li, Shilun Ruan, 2023, Journal of Applied Polymer Science.

Topology optimization of thermal–fluid problem using the MMC-based approach

Xinyu Wang, Zheng Li, Changyu Shen, 2019, Structural and Multidisciplinary Optimization.

Multi-objective optimization of coronary stent using Kriging surrogate model

Hongxia Li, Minjie Wang, Danyang Zhao, 2016, Biomedical engineering online.

Design optimization of stent and its dilatation balloon using kriging surrogate model

Hongxia Li, Tao Liu, Minjie Wang, 2017, Biomedical engineering online.

Reducing service stress of the injection-molded polycarbonate window by optimizing mold construction and product structure

Xinyu Wang, Xicheng Wang, Zheng Li, 2016 .

Simulation of Polymer Melt Injection Molding Filling Flow Based on an Improved SPH Method with Modified Low‐Dissipation Riemann Solver

Junfeng Gu, Zheng Li, Changyu Shen, 2021, Macromolecular Theory and Simulations.

Numerical study on the influence of liner geometry and lay-up sequence on the fatigue life of composite hydrogen storage vessel

Yikai Zhang, Junfeng Gu, Zheng Li, 2023, International Journal of Pressure Vessels and Piping.

A synergic topology optimization approach on distribution of cooling channels and diverse-intensity heat sources for liquid-cooled heat sink

Junfeng Gu, Zheng Li, Xinyu Wang, 2022, Structural and Multidisciplinary Optimization.

Study on the Influence of Microinjection Molding Processing Parameters on Replication Quality of Polylactic Acid Microneedle Array Product

L. J. Lee, Junfeng Gu, Zheng Li, 2023, Polymers.

An integrated two-step strategy for an optimal design of liquid-cooled channel layout based on the MMC–density approach

Junfeng Gu, Zheng Li, Changyu Shen, 2022, Structural and Multidisciplinary Optimization.

Integration optimization of molding and service for injection-molded product

Xinyu Wang, Xicheng Wang, Wenjuan Liu, 2016 .