I. Mihailescu

发表

Electron microscopy investigation of pulsed-laser deposited hydroxylapatite thin films

Ion N. Mihailescu, V. Nelea, J. Werckmann, 2004, ROMOPTO International Conference on Micro- to Nano- Photonics.

Structural characterization of AlN films synthesized by pulsed laser deposition

P. Petrik, I. Mihailescu, A. Szekeres, 2011 .

Probing electron-phonon coupling in metals via observations of ablation plumes produced by two delayed short laser pulses

I. Mihailescu, J. Hermann, T. Itina, 2011 .

Synthesis of ZnO thin films by 40 ps @ 532 nm laser pulses

D. Batani, I. Mihailescu, G. Socol, 2011 .

Complex (As2S3)(100-x)(AgI)x chalcogenide glasses for gas sensors

J. Reithmaier, I. Mihailescu, C. Popov, 2009 .

Growth of Al doped ZnO thin films by a synchronized two laser system

I. Mihailescu, J. Santiso, M. Kompitsas, 2005 .

High-efficiency high-optical-quality transverse-flow CO2 laser

Ion N. Mihailescu, Iulian Gutu, Geo Georgescu, 1998, International Symposium on High Power Laser Systems and Applications.

Nanostructured Thin Optical Sensors for Trace Gas Detection

I. Mihailescu, C. Ristoscu, L. Escoubas, 2008 .

Enhanced gas sensing of Au nanocluster-doped or -coated zinc oxide thin films

I. Mihailescu, A. Szekeres, G. Socol, 2007 .

Functional Nanostructured Metal Oxide Thin Films for Applications in Optical Gas Detection

I. Mihailescu, G. Socol, C. Ristoscu, 2006 .

Efficient Microbial Decontamination of Translucent Liquids and Gases Using Optical Metamaterials

I. Mihailescu, C. Ristoscu, G. Popescu-Pelin, 2018, Advanced Surface Engineering Research.

Optical metamaterials for decontamination of translucent liquids and gases

I. Mihailescu, C. Ristoscu, N. Enaki, 2018, Journal of Physics D: Applied Physics.

Subpicosecond laser ablation of copper and fused silica: Initiation threshold and plasma expansion

M. Sentis, I. Mihailescu, J. Hermann, 2009 .

On the role of the periodical structures induced by powerful laser irradiation of metallic surfaces in the energy coupling process

I. Ursu, A. M. Prokhorov, V. N. Tokarev, 1985 .

Mn12 benzoate thin films on Si substrates fabricated by matrix assisted pulsed laser evaporation

I. Mihailescu, G. Socol, A. Tasiopoulos, 2010 .

Artificial Neural Network Algorithms for 3D Printing

I. Mihailescu, C. Ristoscu, M. A. Mahmood, 2020, Materials.

Metal Matrix Composites Synthesized by Laser-Melting Deposition: A Review

I. Mihailescu, A. Popescu, M. A. Mahmood, 2020, Materials.

Three-Jet Powder Flow and Laser–Powder Interaction in Laser Melting Deposition: Modelling Versus Experimental Correlations

I. Mihailescu, C. Ristoscu, D. Chioibasu, 2020, Metals.

Laser thin films deposition and characterization for biomedical applications

I. Mihailescu, C. Ristoscu, L. Duta, 2016 .

Inorganic-organic thin implant coatings deposited by lasers.

I. Mihailescu, K. Anselme, J. Dentzer, 2015, ACS applied materials & interfaces.

Hybrid Laser Technology for Composite Coating and Medical Applications

I. Mihailescu, M. Jelínek, T. Kocourek, 2014 .

Thin As-Se-Sb Films as Potential Medium for Optics and Sensor Application

I. Mihailescu, G. Socol, P. Petkov, 2011 .

Microbial colonization of biopolymeric thin films containing natural compounds and antibiotics fabricated by MAPLE

I. Mihailescu, G. Socol, R. Narayan, 2015 .

Deposition of antibacterial of poly(1,3-bis-(p-carboxyphenoxy propane)-co-(sebacic anhydride)) 20:80/gentamicin sulfate composite coatings by MAPLE

P. R. Miller, T. N. Martin, I. Stamatin, 2011 .

Laser-induced acoustic waves: a possible approach to the formation of surface structures

A. Barborica, I. Mihailescu, M. Dinescu, 1993 .

Laser–Plasma Interactions

I. Mihailescu, J. Hermann, 2010 .

The relationship between the thermoelectric generator efficiency and the device engineering figure of merit Zd,eng. The maximum efficiency 𝜼max

I. Mihailescu, C. Hapenciuc, T. Borca-Tasciuc, 2017 .

Grain refinement and mechanical properties for AISI304 stainless steel single-tracks by laser melting deposition: Mathematical modelling versus experimental results

I. Mihailescu, C. Ristoscu, D. Chioibasu, 2021 .

Fabrication of aqueous colloids of TixO2x-1 and Ag composite nanostructures by means of pulsed laser processing

I. Mihailescu, C. Ristoscu, D. Karashanova, 2021 .

New results in pulsed laser deposition of poly-methyl-methacrylate thin films

M. Popescu, I. Stamatin, I. Mihailescu, 2003 .

Laser reactive ablation deposition of silicon carbide films

A. Barborica, I. Mihailescu, A. Luches, 1996 .

Direct carbide synthesis by multipulse excimer laser treatment of Ti samples in ambient CH4 gas at superatmospheric pressure

M. Popescu, N. Chitica, A. Barborica, 1994 .

Bioresponsive Surfaces and Interfaces Fabricated by Innovative Laser Approaches

I. Mihailescu, C. Ristoscu, K. Anselme, 2016 .

Strontium and zoledronate hydroxyapatites graded composite coatings for bone prostheses.

I. Mihailescu, E. Axente, F. Sima, 2015, Journal of colloid and interface science.

Antiresorption implant coatings based on calcium alendronate and octacalcium phosphate deposited by matrix assisted pulsed laser evaporation.

I. Mihailescu, C. Ristoscu, A. Bigi, 2015, Colloids and surfaces. B, Biointerfaces.

Biocompatibility evaluation of a novel hydroxyapatite-polymer coating for medical implants (in vitro tests)

I. Mihailescu, R. Piticescu, G. Negroiu, 2008, Journal of materials science. Materials in medicine.

Biofunctional alendronate-Hydroxyapatite thin films deposited by Matrix Assisted Pulsed Laser Evaporation.

I. Mihailescu, C. Ristoscu, F. Sima, 2009, Biomaterials.

Laser reactive ablation of thin nitride films

I. Mihailescu, A. Luches, P. Mengucci, 1994 .

Laser induced phase transition in iron thin films

N. Chitica, A. Barborica, I. Mihailescu, 1994 .

CO2‐laser radiation absorption by metal gratings

I. Ursu, A. Prokhorov, I. Mihailescu, 1984 .

Study of (As2Se3)100-X(AgI)X Thin Films Prepared by Pld and Vte Methods

J. Reithmaier, I. Mihailescu, G. Socol, 2009 .

Structural and optical characterization of undoped, doped, and clustered ZnO thin films obtained by PLD for gas sensing applications

I. Mihailescu, G. Socol, C. Ristoscu, 2007 .

Structure, properties and gas sensing effect of SnSe2 films prepared by pulsed laser deposition method

M. Popescu, C. Simion, I. Mihailescu, 2007 .

Clean, cold, and liquid-free laser transfer of biomaterials

I. Mihailescu, T. Kononenko, I. Nagovitsyn, 2011 .

Application of clean laser transfer for porphyrin micropatterning

I. Mihailescu, T. Kononenko, I. Nagovitsyn, 2010 .

Functionalized Nanoscale Materials, Devices and Systems

Ashok Vaseashta, I. N. Mihailescu, I. Mihailescu, 2008 .

Correlation between electronic structure and photocatalytic properties of non-metal doped TiO2/ZrO2 thin films obtained by pulsed laser deposition method

I. Mihailescu, G. Socol, C. Ristoscu, 2015 .

Particulates generation and solutions for their elimination in pulsed laser deposition

I. Mihailescu, M. Kompitsas, E. Gyorgy, 2004 .

Deposition of particulate-free thin films by two synchronised laser sources: effects of ambient gas pressure and laser fluence

I. Mihailescu, M. Kompitsas, E. Gyorgy, 2004 .

Single pulse Nd:YAG laser irradiation of titanium: influence of laser intensity on surface morphology

I. Mihailescu, Á. D. Pino, P. Serra, 2002 .

Growth and characterization of β-SiC films obtained by fs laser ablation

C. Fotakis, I. Mihailescu, G. Socol, 2006 .

Optical characterizations of ZnO, SnO2, and TiO2 thin films for butane detection.

I. Mihailescu, L. Escoubas, A. Perrone, 2006, Applied optics.

Pulsed laser deposition of semiconducting crystalline double-doped barium titanate thin films on nickel substrates

I. Mihailescu, M. Socol, N. Ştefan, 2011 .

Oxidation behaviour of composite CrN/(Cr,V)N coatings with different contents of vanadium induced by UV nanosecond laser pulses

I. Mihailescu, C. Ristoscu, J. Kovač, 2018 .

Antimicrobial polycaprolactone/polyethylene glycol embedded lysozyme coatings of Ti implants for osteoblast functional properties in tissue engineering

I. Mihailescu, G. Socol, M. Chifiriuc, 2017 .

Laser self-aligned synthesis of TiSi2

N. Chitica, I. Mihailescu, M. Bertolotti, 1992 .

Mesoscopic Computational Fluid Dynamics Modelling for the Laser-Melting Deposition of AISI 304 Stainless Steel Single Tracks with Experimental Correlation: A Novel Study

I. Mihailescu, A. Popescu, M. A. Mahmood, 2021, Metals.

Maple prepared organic heterostructures for photovoltaic applications

I. Mihailescu, G. Socol, M. Girtan, 2011 .

Influence of irradiation conditions on plasma evolution in laser-surface interaction

I. Mihailescu, J. Hermann, C. Boulmer-Leborgne, 1993 .

Laser Interferometry at 10.6 μm for Plasma Diagnostics

I. Ursu, I. Mihailescu, D. Craciun, 1986 .

Bioglass thin films for biomimetic implants

I. Mihailescu, G. Socol, A. Popescu, 2009 .

Nanostructured bioglass thin films synthesized by pulsed laser deposition: CSLM, FTIR investigations and in vitro biotests

I. Mihailescu, A. Popescu, S. Petrescu, 2008 .

Bioactive glass and hydroxyapatite thin films obtained by pulsed laser deposition

I. Mihailescu, G. Socol, S. Grigorescu, 2007 .

Particulates-free Ta thin films obtained by pulsed laser deposition: the role of a second laser in the laser-induced plasma heating

I. Mihailescu, M. Kompitsas, E. Gyorgy, 2002 .

Characteristic features of the laser radiation–target interactions during reactive pulsed laser ablation of Si targets in ammonia

I. Mihailescu, A. Luches, V. Teodorescu, 1999 .

Chapter 5 Pulsed Laser-Deposited TiO 2-based Films : Synthesis , Electronic Structure and Photocatalytic Activity

I. Mihailescu, G. Socol, C. Ristoscu, 2018 .

Focusing geometry-induced size tailoring of silver nanoparticles obtained by laser ablation in water

I. Mihailescu, G. Joksiċ, J. Stašić, 2014 .

The vaporization of a metallic target by a microsecond pulsed TE-CO2 laser radiation

I. Ursu, A. M. Prokhorov, I. Apostol, 1981 .

IR-Laser light coupling to metal surfaces☆

I. Ursu, I. Mihailescu, V. Nassisi, 1991 .

Synthesis of sheet conductive layers on the surface of some insulator ceramics (TiO2, ZrO2, HfO2) by multipulse CO2‐laser irradiation in an ammonia atmosphere

S. A. Uglov, I. Ursu, A. Prokhorov, 1989 .

Damage studies in cubic ZnSe single crystals grown from melt

N. I. Chapliev, M. P. Kulakov, I. Ursu, 1989 .

Study of the compounds formed on damaged ZnSe windows by multi-pulse microsecond pulsed TEA-CO2 laser irradiation in air

N. I. Chapliev, I. Ursu, A. Prokhorov, 1986 .

Threshold conditions for the air plasma initiation near solid surfaces under the action of powerful pulsed CO2 laser radiation

N. I. Chapliev, I. Ursu, A. Prokhorov, 1985 .

On the influence of surface condition on air plasma formation near metals irradiated by microsecond TEA CO2 laser pulses

N. I. Chapliev, I. Ursu, A. Prokhorov, 1984 .

On the behaviour of aluminium under microsecond pulsed TEA CO2 laser radiation in vacuum

I. Ursu, A. Prokhorov, I. Mihailescu, 1984 .

K8 High-density stationary plasma on metallic targets under tea-CO2 laser radiation

V. A. Batanov, I. Ursu, A. Prokhorov, 1976 .

Thickness Influence on In Vitro Biocompatibility of Titanium Nitride Thin Films Synthesized by Pulsed Laser Deposition

I. Mihailescu, L. Duta, G. Stan, 2016, Materials.

Gradient coatings of strontium hydroxyapatite/zinc β-tricalcium phosphate as a tool to modulate osteoblast/osteoclast response.

I. Mihailescu, E. Axente, F. Sima, 2018, Journal of inorganic biochemistry.

Pulsed 10μm-laser interferometry of the early evolution stages of a laser-generated breakdown plasma in air in front of an aluminium target

I. Ursu, I. Mihailescu, D. Craciun, 1989 .

Oxidation of Thin Polycrystalline Sputtered Cr Films by c.w. CO 2 Laser Irradiation in Air

I. Mihailescu, M. Dinescu, M. Bǐrjega, 1986 .

Laser Ablation of Biomaterials

I. Mihailescu, C. Ristoscu, G. Popescu-Pelin, 2016 .

Combinatorial MAPLE deposition of antimicrobial orthopedic maps fabricated from chitosan and biomimetic apatite powders.

I. Mihailescu, C. Ristoscu, D. Grossin, 2016, International journal of pharmaceutics.

Fish Bone Derived Bi-Phasic Calcium Phosphate Coatings Fabricated by Pulsed Laser Deposition for Biomedical Applications

I. Mihailescu, C. Ristoscu, L. Duta, 2020, Marine drugs.

Microstructure and mechanical characteristics of hydroxyapatite coatings on Ti/TiN/Si substrates synthesized by pulsed laser deposition

J. Faerber, I. Mihailescu, A. Carradò, 2011 .

Synergistic effects of BMP-2, BMP-6 or BMP-7 with human plasma fibronectin onto hydroxyapatite coatings: A comparative study.

I. Mihailescu, C. Ristoscu, M. Sogayar, 2017, Acta biomaterialia.

Hydroxyapatite thin films grown by pulsed laser deposition and radio-frequency magnetron sputtering: comparative study

M. Iliescu, V. Nelea, I. Mihailescu, 2004 .

Microstructure and mechanical properties of hydroxyapatite thin films grown by RF magnetron sputtering

M. Iliescu, V. Nelea, I. Mihailescu, 2003 .

Sea Snail: An Alternative Source for Nano-Bioceramic Production

I. Mihailescu, C. Ristoscu, F. Oktar, 2011 .

Direct carbidation of titanium as a result of multipulse UV-laser irradiation of titanium samples in an ambient methane gas

I. Ursu, I. Mihailescu, P. Brault, 1992 .

Synergistic effect in a two-phase laser procedure for production of silver nanoparticles colloids applicable in ophthalmology

I. Mihailescu, C. Ristoscu, D. Karashanova, 2020, 2007.13485.

Time characteristics in laser diffusion of gaseous mixtures through capillaries

I. Ursu, A. Prokhorov, I. Mihailescu, 1989 .

Laser prepared organic heterostuctures on glass/AZO substrates

I. Mihailescu, G. Socol, M. Socol, 2014 .

A Perspective of Pulsed Laser Deposition (PLD) in Surface Engineering: Alumina Coatings and Substrates

I. Mihailescu, C. Ristoscu, A. Carradò, 2008 .

Increased Bioactivity of Cranio-spinal Implants Functionalized with Hydroxyapatite Nanostructured Coatings: Morpho-structural Characterization and In-Vitro Evaluation

I. Mihailescu, G. Socol, L. Duta, 2010, 2010 Advanced Technologies for Enhancing Quality of Life.

Structural and optical characterization of AlN films grown by pulsed laser deposition

I. Mihailescu, G. Socol, C. Ristoscu, 2005 .

Electrical Properties of MIS Capacitors with AlN Films Synthesized by Pulsed Laser Deposition

I. Mihailescu, A. Szekeres, G. Socol, 2006 .

Functionalized porphyrin conjugate thin films deposited by matrix assisted pulsed laser evaporation

I. Stamatin, I. Mihailescu, D. Chrisey, 2013 .

ZnO Thin Films Deposited on Textile Material Substrates for Biomedical Applications

I. Mihailescu, L. Duta, G. Stan, 2012 .

Gradient multifunctional biopolymer thin film assemblies synthesized by combinatorial MAPLE

I. Mihailescu, C. Ristoscu, M. Eroglu, 2019, Applied Surface Science.

Non-Fourier Estimate of Electron Temperature in Case of Femtosecond Laser Pulses Interaction with Metals

I. Mihailescu, C. Ristoscu, A. Popescu, 2020 .

An Analytical Multiple-Temperature Model for Flash Laser Irradiation on Single-Layer Graphene

I. Mihailescu, C. Ristoscu, M. A. Mahmood, 2020, Nanomaterials.

Biomimetic Coatings by Pulsed Laser Deposition

I. Mihailescu, C. Ristoscu, I. Mihăilescu, 2013 .

Effect of maleic anhydride–aniline derivative buffer layer on the properties of flexible substrate heterostructures: Indium tin oxide/nucleic acid base/metal

I. Mihailescu, G. Socol, M. Girtan, 2011 .

Pulsed Laser Fabrication of TiO2 Buffer Layers for Dye Sensitized Solar Cells

I. Mihailescu, G. Socol, G. Popescu-Pelin, 2019, Nanomaterials.

Investigation by laser‐induced fluorescence of surface vaporization during the pulsed CO2 laser irradiation of a titanium sample in an ambient gas

I. Mihailescu, J. Hermann, C. Boulmer-Leborgne, 1992 .

Structure and magnetic properties of ZnO films doped with Co, Ni or Mn synthesized by pulsed laser deposition under low and high oxygen partial pressures

I. Mihailescu, G. Socol, P. Berthet, 2008 .

Photocatalytic activity of pulsed laser deposited TiO2 thin films in N2, O2 and CH4

I. Mihailescu, G. Socol, N. Ştefan, 2010 .

Growth of metal-oxide semiconductor nanocomposite thin films by a dual-laser, dual target deposition system

I. Mihailescu, M. Kompitsas, G. Sauthier, 2007 .

Doped thin metal oxide films for catalytic gas sensors

I. Mihailescu, E. Axente, E. Gyorgy, 2006 .

Visible light-harvesting of TiO2 nanotubes array by pulsed laser deposited CdS

I. Mihailescu, O. Ersen, I. Florea, 2014 .

Antifungal activity of Ag:hydroxyapatite thin films synthesized by pulsed laser deposition on Ti and Ti modified by TiO2 nanotubes substrates

I. Mihailescu, C. Ristoscu, L. Duta, 2014 .

Sn-doped TiO2 nanotubular thin film for photocatalytic degradation of methyl orange dye

I. Mihailescu, G. Socol, G. Stan, 2020 .

Doping of TiO2 nanotubes with nitrogen by annealing in ammonia for visible light activation: Influence of pre- and post-annealing in air

I. Mihailescu, G. Socol, Z. Rakočević, 2019 .

CdS quantum dots sensitized TiO2 nanotubes by matrix assisted pulsed laser evaporation method

I. Mihailescu, G. Socol, M. Enculescu, 2016 .

SYNTHESIS AND CHARACTERIZATION OF BIOGLASS THIN FILMS

I. Mihailescu, F. Sima, L. Floroian, 2007 .

Creatinine biomaterial thin films grown by laser techniques

I. Mihailescu, E. Axente, J. Neamțu, 2008, Journal of materials science. Materials in medicine.

Diffusion model for the laser oxidation of metallic samples in air

I. Ursu, I. Mihailescu, L. Nanu, 1986 .

Structural and biological evaluation of lignin addition to simple and silver-doped hydroxyapatite thin films synthesized by matrix-assisted pulsed laser evaporation

Ion N. Mihailescu, Carmen Ristoscu, L. Duta, 2015, Journal of Materials Science: Materials in Medicine.

Biomimetic Collagen/Zn2+-Substituted Calcium Phosphate Composite Coatings on Titanium Substrates as Prospective Bioactive Layer for Implants: A Comparative Study Spin Coating vs. MAPLE

I. Mihailescu, C. Ristoscu, A. Ficai, 2019, Nanomaterials.

Characterization of MAPLE deposited WO3 thin films for electrochromic applications

I. Mihailescu, G. Stan, N. Ştefan, 2017 .

Composite Coatings Based on Renewable Resources Synthesized by Advanced Laser Techniques

I. Mihailescu, C. Ristoscu, A. Visan, 2016 .

Functionalized polyvinyl alcohol derivatives thin films for controlled drug release and targeting systems: MAPLE deposition and morphological, chemical and in vitro characterization

I. Stamatin, I. Mihailescu, S. Grigorescu, 2009 .

Laser processing of polyethylene glycol derivative and block copolymer thin films

I. Stamatin, I. Mihailescu, S. Grigorescu, 2009 .

Pulsed laser deposition of silicon nitride thin films by laser ablation of a Si target in low pressure ammonia

Ion N. Mihailescu, Armando Luches, Alessio Perrone, 1996, Journal of Materials Science.

Crystalline structure of very hard tungsten carbide thin films obtained by reactive pulsed laser deposition

M. Popescu, I. Mihailescu, V. Teodorescu, 1999 .

Optical studies of carbon nitride thin films deposited by reactive pulsed laser ablation of a graphite target in low pressure ammonia

J. Werckmann, I. Mihailescu, A. Luches, 1998 .

Synthesis of tungsten carbide thin films by reactive pulsed laser deposition

N. Chitica, I. Mihailescu, A. Lita, 1997 .

Fire ball formation and evolution in the case of low‐threshold optical breakdown plasma generation in ambient gases in front of various solid samples

A. S. Silenok, I. Ursu, A. Prokhorov, 1989 .

Synthesis of pure titanium nitride layers by multipulse excimer laser irradiation of titanium foils in a nitrogen‐containing atmosphere

I. Mihailescu, A. Luches, E. D'anna, 1991 .

Direct nitridation of a silicon surface by multipulse excimer laser irradiation in a nitrogen‐containing ambient gas

I. Mihailescu, J. Zemek, A. Luches, 1991 .

Low-power-laser driven ultrafine silicon nitride production in a flowing system

I. Ursu, I. Mihailescu, R. Alexandrescu, 1990 .

Laser-reactive ablation deposition of silicon-nitride films

I. Mihailescu, J. Zemek, A. Luches, 1995 .

Precise femtosecond laser crater fabrication in hard nanolayered AlTiN/TiN coating on steel substrate

I. Mihailescu, G. Popescu-Pelin, P. Panjan, 2017 .

Femtosecond laser modification of multilayered TiAlN/TiN coating

I. Mihailescu, C. Ristoscu, P. Panjan, 2011 .

Multi-layer haemocompatible diamond-like carbon coatings obtained by combined radio frequency plasma enhanced chemical vapor deposition and magnetron sputtering

I. Mihailescu, G. Stan, A. Popescu, 2013, Journal of Materials Science: Materials in Medicine.

The Influence of the Microstructure and Morphology of CeO2 Buffer Layer on the Properties of YBCO Films PLD Grown on Ni Tape

I. Mihailescu, I. Enculescu, M. Socol, 2014 .

Principal component analysis of Raman spectra for TiO 2 nanoparticle characterization

I. Mihailescu, M. Bădiceanu, I. Morjan, 2017 .

New bio-active, antimicrobial and adherent coatings of nanostructured carbon double-reinforced with silver and silicon by Matrix-Assisted Pulsed Laser Evaporation for medical applications

I. Mihailescu, C. Ristoscu, L. Duta, 2018 .

Metal oxide nanoparticles synthesized by pulsed laser ablation for proton exchange membrane fuel cells

I. Mihailescu, C. Ristoscu, I. Enculescu, 2010 .

Thin WBx and WyTi1−yBx films deposited by combined magnetron sputtering and pulsed laser deposition technique

Z. Szymański, I. Mihailescu, C. Ristoscu, 2019, Applied Surface Science.

Combinatorial Laser Synthesis of Biomaterial Thin Films: Selection and Processing for Medical Applications

I. Mihailescu, C. Ristoscu, E. Axente, 2018 .

The direct dissociative recombination of the hydrogen molecular ion at low energies

I. Mihailescu, L. Nanu, I. Schneider, 1985 .

Silicone polymer deposition by CO2 laser induced decomposition of silane in the presence of methyl methacrylate

I. Mihailescu, C. Grigoriu, Z. Bastl, 1988 .

Extended analysis of the frequency dependence of the admittance of MIS structures with pulsed-laser-deposited AlN films

I. Mihailescu, A. Szekeres, G. Socol, 2008 .

Al / AlN / Si MIS Structures with Pulsed-Laser-Deposited AlN Films as Gate Dielectrics : Electrical Properties

I. Mihailescu, A. Szekeres, G. Socol, 2007 .

Optimized silicon reinforcement of carbon coatings by pulsed laser technique for superior functional biomedical surfaces fabrication

I. Mihailescu, G. Socol, L. Duta, 2017, Biofabrication.

About the possible diminution of the sp3 C presence along with the increase of the nitrogen enclosure in the CNx thin films produced by reactive pulsed laser deposition

I. Mihailescu, M. Abrashev, A. Zocco, 2001 .

Pulsed Laser Deposition of Aluminum Nitride Films: Correlation between Mechanical, Optical, and Structural Properties

P. Petrik, I. Mihailescu, A. Szekeres, 2019, Coatings.

Study of the charge transport mechanism in pulsed laser deposited AlN:Si films

I. Mihailescu, A. Szekeres, Á. Cziráki, 2012 .

Thermal fields in laser multi-layer structures interaction

I. Mihailescu, M. Oane, S. Tsao, 2007 .

Fabrication of antimicrobial silver-doped carbon structures by combinatorial pulsed laser deposition.

I. Mihailescu, G. Socol, L. Duta, 2016, International journal of pharmaceutics.

Combinatorial MAPLE gradient thin film assemblies signalling to human osteoblasts

I. Mihailescu, C. Ristoscu, M. Eroglu, 2014, Biofabrication.

Hydroxyapatite thin films grown by pulsed laser deposition and matrix assisted pulsed laser evaporation: Comparative study

I. Mihailescu, G. Socol, G. Popescu-Pelin, 2017 .

Laser systems for synthesis of nanostructured materials from liquid and gaseous precursors for biomedical applications.

I. Mihailescu, C. Ristoscu, G. Demian, 2013 .

Hybrid dextran-iron oxide thin films deposited by laser techniques for biomedical applications

I. Mihailescu, M. Costache, E. Axente, 2012 .

UVC radiation intensity dependence of pathogen decontamination rate: semiclassical theory and experiment

I. Mihailescu, N. Enaki, M. Ţurcan, 2022, The European Physical Journal Plus.

Nanoparticle Based Decontamination of Bacteria/Pathogens

I. Mihailescu, C. Ristoscu, N. Enaki, 2018 .

Improvement in ultraviolet based decontamination rate using meta-materials

I. Mihailescu, C. Ristoscu, N. Enaki, 2017 .

Pulsed laser deposition of transparent conductive oxide thin films on flexible substrates

I. Mihailescu, G. Socol, L. Duta, 2012 .

Comparative physical, chemical and biological assessment of simple and titanium-doped ovine dentine-derived hydroxyapatite coatings fabricated by pulsed laser deposition

I. Mihailescu, L. Duta, F. Oktar, 2017 .

Crystalline vanadium nitride ultra-thin films obtained at room temperature by pulsed laser deposition

I. Mihailescu, G. Socol, F. Sima, 2012 .

Fibronectin layers by matrix-assisted pulsed laser evaporation from saline buffer-based cryogenic targets.

I. Mihailescu, K. Anselme, F. Sima, 2011, Acta biomaterialia.

Radical modification of the wetting behavior of textiles coated with ZnO thin films and nanoparticles when changing the ambient pressure in the pulsed laser deposition process

I. Mihailescu, L. Duta, G. Stan, 2011 .

Detection of Charge Density Wave Ground State in Granular Thin Films of Blue Bronze K0.3MoO3 by femtosecond spectroscopy

I. Mihailescu, J. Demšar, G. Socol, 2011 .

Biomolecular urease thin films grown by laser techniques for blood diagnostic applications

I. Mihailescu, S. Petrescu, F. Sima, 2010 .

MAPLE prepared polymeric thin films for non-linear optic applications

I. Mihailescu, G. Socol, Ş. Antohe, 2009 .

Characterization of pulsed laser deposited chalcogenide thin layers

J. Reithmaier, I. Mihailescu, G. Socol, 2009 .

Nickel oxide thin films synthesized by reactive pulsed laser deposition: characterization and application to hydrogen sensing

I. Mihailescu, M. Kompitsas, E. Gyorgy, 2008 .

Strontium-Substituted Hydroxyapatite Thin Films Grown by Pulsed Laser Deposition

I. Mihailescu, M. Gazzano, E. Axente, 2008 .

Study of the gradual interface between hydroxyapatite thin films PLD grown onto Ti-controlled sublayers

J. Werckmann, J. Faerber, I. Mihailescu, 2007 .

Nanocrystalline Er:YAG thin films prepared by pulsed laser deposition: An electron microscopy study

I. Mihailescu, G. Socol, C. Ristoscu, 2007 .

Biomolecular papain thin films growth by laser techniques

I. Mihailescu, G. Socol, J. Santiso, 2007, Journal of materials science. Materials in medicine.

Thin films growth parameters in MAPLE; application to fibrinogen

I. Stamatin, I. Mihailescu, M. Jelínek, 2007 .

MAPLE applications in studying organic thin films

I. Mihailescu, M. Jelínek, D. Chrisey, 2007 .

Morphological and structural characterisation of osseointegrable Mn2+ and CO32− doped hydroxylapatite thin films

J. Werckmann, M. Iliescu, V. Nelea, 2007 .

Structural Characterization of Er:Yag Thin Films Grown by Pulsed Laser Deposition

I. Mihailescu, G. Socol, S. Grigorescu, 2006 .

Calcium phosphate thin films synthesized by pulsed laser deposition : Physico-chemical characterization and in vitro cell response

J. Werckmann, M. Iliescu, I. Mihailescu, 2005 .

Human osteoblast response to pulsed laser deposited calcium phosphate coatings.

I. Mihailescu, G. Socol, F. Cuisinier, 2005, Biomaterials.

Structural and optical characterization of WO3 thin films for gas sensor applications

I. Mihailescu, G. Socol, E. Gyorgy, 2005 .

Deposition of biopolymer thin films by matrix assisted pulsed laser evaporation

I. Stamatin, I. Mihailescu, G. Socol, 2004 .

Biocompatible nanocrystalline octacalcium phosphate thin films obtained by pulsed laser deposition.

J. Werckmann, M. Iliescu, I. Mihailescu, 2004, Biomaterials.

Electron microscopy studies of octa-calcium phosphate thin films obtained by pulsed laser deposition

J. Werckmann, M. Iliescu, V. Nelea, 2004 .

Pulsed laser deposition of biocompatible polymers: a comparative study in case of pullulan

I. Stamatin, I. Mihailescu, D. Chrisey, 2004 .

Surface Morphology Studies of Sub-Ps Pulsed-Laser-Deposited AlN Thin Films

C. Fotakis, I. Mihailescu, Vassilia Zorba, 2004 .

Growth of calcium phosphate thin films by in situ assisted ultraviolet pulsed laser deposition

J. Werckmann, M. Iliescu, V. Nelea, 2003 .

Correlation between the chemical bonding and the physical properties of the CNx films obtained by pulsed laser deposition from C targets in low-pressure N2

I. Mihailescu, A. Szekeres, M. Abrashev, 2003 .

Optical emission spectroscopy and time-of-flight investigations of plasmas generated from AlN targets in cases of pulsed laser deposition with sub-ps and ns ultraviolet laser pulses

C. Fotakis, I. Mihailescu, C. Ristoscu, 2003 .

Calcium phosphate thin film processing by pulsed laser deposition and in situ assisted ultraviolet pulsed laser deposition

J. Werckmann, M. Iliescu, V. Nelea, 2002, Journal of materials science. Materials in medicine.

Mechanical properties improvement of pulsed laser-deposited hydroxyapatite thin films by high energy ion-beam implantation

V. Nelea, I. Mihailescu, C. Ristoscu, 2002 .

Correlation between hardness and structure of carbon-nitride thin films obtained by reactive pulsed laser deposition

J. Werckmann, V. Nelea, I. Mihailescu, 2001 .

Laser reactive ablation deposition of titanium carbide films

I. Mihailescu, A. Luches, P. Mengucci, 1995 .

TiO2 nanotubes film/FTO glass interface: Thermal treatment effects

I. Mihailescu, G. Socol, G. Stan, 2022, Science of Sintering.

Characterisation of the charge transport mechanism in pulsed laser deposited AlN:Si films

I. Mihailescu, A. Szekeres, Z. Fogarassy, 2014, 2014 International Semiconductor Conference (CAS).

Influence of a hydrophobin underlayer on the structuring and antimicrobial properties of ZnO films

I. Mihailescu, L. Duta, G. Stan, 2013, Journal of Materials Science.

Nanoscopic photodeposited structures analyzed by an evanescent optical method

I. Mihailescu, G. Socol, V. Vlad, 2007 .

Using differential evanescent light intensity for evaluating profiles and growth rates in KrF laser photodeposited nanostructures

A. Dinescu, I. Mihailescu, G. Socol, 2007 .

Spectroscopic study of laser irradiated chromatin

I. Mihailescu, L. Radu, V. Preoteasa, 2013 .

Time-resolved spectroscopy and fluorescence resonance energy transfer in the study of excimer laser damage of chromatin

I. Mihailescu, L. Radu, D. Gazdaru, 2007 .

Direct laser synthesis of thin silicon and germanium nitride/oxynitride layers

I. Mihailescu, A. Luches, V. Craciun, 1992 .

Pulsed laser deposition of lithium niobate: a parametric study

V. Nelea, I. Mihailescu, M. Gartner, 1999 .

Effect of broadband light on Ag/As2S3 multilayers

M. Popescu, I. Simandan, I. Mihailescu, 2013 .

Photoexpansion and nano-lenslet formation in amorphous As2S3 thin films by 800 nm femtosecond laser irradiation

M. Popescu, I. Simandan, I. Mihailescu, 2012 .

A parametric study of the deposition of the TiN thin films by laser reactive ablation of titanium targets in nitrogen: the roles of the total gas pressure and the contaminations with oxides

N. Chitica, I. Mihailescu, A. Luches, 1996, Journal of Materials Science.

Surface-enhanced Raman scattering activity of niobium surface after irradiation with femtosecond laser pulses

V. G. Ivanov, I. Mihailescu, C. Ristoscu, 2015 .

Novel doped hydroxyapatite thin films obtained by pulsed laser deposition

I. Mihailescu, L. Duta, G. Popescu-Pelin, 2013 .

Biocompatible and bioactive coatings of Mn2+-doped β-tricalcium phosphate synthesized by pulsed laser deposition

I. Mihailescu, G. Socol, S. Petrescu, 2007 .

Magnesium and strontium doped octacalcium phosphate thin films by matrix assisted pulsed laser evaporation.

I. Mihailescu, F. Sima, A. Bigi, 2012, Journal of inorganic biochemistry.

Processing of poly(1,3-bis-(p-carboxyphenoxy propane)-co-(sebacic anhydride)) 20:80 (P(CPP:SA)20:80) by matrix-assisted pulsed laser evaporation for drug delivery systems

I. Stamatin, I. Mihailescu, S. Grigorescu, 2007 .

Pulsed Laser Processing of Functionalized Polysaccharides for Controlled Release Drug Delivery Systems

I. Mihailescu, G. Socol, A. Popescu, 2012 .

I. Mihailescu, M. Stirbet, V. Vasiliu, 1991 .

An interferometric electron density estimate of a TE-CO2 laser sustained plasma in front of a metallic target

I. Mihailescu, M. Dinescu, A. Henig, 1983 .

Interferometric investigation of shock waves induced by a TEA‐CO2 laser‐produced plasma in air in front of a solid target

I. Mihailescu, V. Konov, V. Drǎgǎnescu, 1980 .

Prevention, Treatment and Tiagnosis of Pathogenic Infections by Using Pulsed Light Radiation Propagating Through Metamaterials

I. Mihailescu, C. Ristoscu, N. Enaki, 2018, IOP Conference Series: Materials Science and Engineering.

Specific features of nickel oxides obtained by thermal and laser induced decomposition of nickel salts. A comparative study

I. Ursu, I. Mihailescu, C. Popescu, 1990 .

Dehydration of some inorganic compounds by CW CO2 laser irradiation and thermal heating: A comparative study

I. Mihailescu, C. Popescu, M. Pascu, 1988 .

Nitrification of zirconium by cw CO2 laser irradiation in ambient atmosphere

I. Ursu, A. Prokhorov, I. Mihailescu, 1985 .

Kinetic evolution during the laser/thermal preparation of Mn3O4 from MnCO3

I. Ursu, I. Mihailescu, C. Popescu, 1986 .

Antimicrobial activity of biopolymer–antibiotic thin films fabricated by advanced pulsed laser methods

I. Mihailescu, G. Socol, R. Narayan, 2013 .

Generation of super-thermal hadron - anti - hadron pairs using extreme light intensities

I. Mihailescu, M. Oane, N. Serban, 2013 .

Laser Ablation of Biomaterials Laser Ablation of Biomaterials

I. Mihailescu, C. Ristoscu, G. Popescu-Pelin, 2016 .

On the theoretical description of the early oxidation stages of copper by cw CO2 laser irradiation

N. I. Chapliev, I. Ursu, A. Prokhorov, 1984 .

Early oxidation stage of copper during cw CO2 laser irradiation

N. I. Chapliev, I. Ursu, A. Prokhorov, 1984 .

Strontium-substituted hydroxyapatite coatings synthesized by pulsed-laser deposition: in vitro osteoblast and osteoclast response.

M Fini, I. Mihailescu, G. Socol, 2008, Acta biomaterialia.

Characterization of PLD grown WO3 thin films for gas sensing

I. Mihailescu, G. Stan, I. Szilágyi, 2017 .

Biomimetic Assemblies by Matrix-Assisted Pulsed Laser Evaporation

I. Mihailescu, F. Sima, I. Mihăilescu, 2013 .

PREPARATION AND CHARACTERIZATION OF TIO 2 THIN FILMS BY PLD AND HIPIMS

I. Mihailescu, V. Tiron, C. Luculescu, 2017 .

Thermal Nonlinear Klein–Gordon Equation for Nano-/Micro-Sized Metallic Particle–Attosecond Laser Pulse Interaction

I. Mihailescu, C. Ristoscu, A. Popescu, 2021, Materials.

Thermal Fields in Laser Cladding Processing: A “Fire Ball” Model. A Theoretical Computational Comparison, Laser Cladding versus Electron Beam Cladding

I. Mihailescu, C. Ristoscu, M. Oane, 2019, Nonlinear Optics - From Solitons to Similaritons.

Oxidation behaviour of composite CrN/(Cr,V)N coatings with different contents of vanadium induced by UV nanosecond laser pulses

I. Mihailescu, C. Ristoscu, J. Kovač, 2018, Optical and Quantum Electronics.

Femtosecond laser processing of NiPd single and 5x(Ni/Pd) multilayer thin films

I. Mihailescu, C. Ristoscu, D. Peruško, 2017 .

Pulsed Laser-Deposited TiO2-based Films: Synthesis, Electronic Structure and Photocatalytic Activity

I. Mihailescu, G. Socol, C. Ristoscu, 2016 .

Deposition and surface modification of thin solid structures by high-intensity pulsed laser irradiation

I. Mihailescu, C. Ristoscu, A. Popescu, 2015 .

Selective single pulse femtosecond laser removal of alumina (Al2O3) from a bilayered Al2O3/TiAlN/steel coating

I. Mihailescu, J. Stašić, M. Trtica, 2012 .

Advanced Biomimetic Implants Based on Nanostructured Coatings Synthesized by Pulsed Laser Technologies

I. Mihailescu, C. Ristoscu, A. Bigi, 2010 .

Spectroscopic studies of (AsSe)100−xAgx thin films

J. Reithmaier, I. Mihailescu, G. Socol, 2009 .

Au cluster growth on ZnO thin films by pulsed laser deposition

I. Mihailescu, J. Santiso, M. Kompitsas, 2006 .

Growth of oxide thin films for optical gas sensor applications

I. Mihailescu, S. Grigorescu, E. Gyorgy, 2006 .

Processing of mussel adhesive protein analog thin films by matrix assisted pulsed laser evaporation

P. Messersmith, I. Stamatin, B. Mizaikoff, 2005 .

Anatase phase TiO2 thin films obtained by pulsed laser deposition for gas sensing applications

Ion N. Mihailescu, Gabriel Socol, Emanuel Axente, 2005 .

Pulsed laser deposition of LiNbO3 thin films from Li-rich targets

I. Mihailescu, G. Socol, E. Gyorgy, 2004 .

Ablation study with a Nd:YAG laser in enhanced free-running regime

Aurel Stratan, Constantin G. Fenic, Razvan Dabu, 2001, ROMOPTO International Conference on Micro- to Nano- Photonics.

Role of laser pulse duration and gas pressure in deposition of AlN thin films

Costas Fotakis, Ion N. Mihailescu, Carmen Ristoscu, 2001 .

Theoretical modelling of phenomena in the pulsed-laser deposition process: Application to Ti targets ablation in low-pressure N2

Ion N. Mihailescu, Carmen Ristoscu, Johny Neamtu, 1999 .

Pulsed Laser Deposition: An Overview

I. N. Mihailescu, I. Mihailescu, E. György, 1999 .

New studies of reactive pulsed laser deposition

Ion N. Mihailescu, Eniko Gyorgy, Johny Neamtu, 1998, ROMOPTO International Conference on Micro- to Nano- Photonics III.

Growth of polycrystalline hydroxyapatite thin films by pulsed laser deposition and subsequent heat treatment in air

Cornel Ghica, Rodica Alexandrescu, Ion N. Mihailescu, 1998, ROMOPTO International Conference on Micro- to Nano- Photonics III.

PLD thin films obtained from CrO3 and Cr8O21 targets

I. Mihailescu, G. Socol, F. Guinneton, 2005 .

Antimicrobial thin films based on ayurvedic plants extracts embedded in a bioactive glass matrix

I. Mihailescu, C. Ristoscu, M. Badea, 2017 .

Structure and properties of silver doped SnSe2 and Ge2Sb2Te5 thin films prepared by pulsed laser deposition

M. Popescu, C. Simion, I. Stamatin, 2010 .

Specific biofunctional performances of the hydroxyapatite–sodium maleate copolymer hybrid coating nanostructures evaluated by in vitro studies

I. Mihailescu, G. Socol, A. Filimon, 2009, Journal of materials science. Materials in medicine.

Green Nanotechnologies for Responsible Manufacturing

I. Mihailescu, R. Reisfeld, Ashok Vaseashta, 2008 .

Implant Surfaces Containing Bioglasses and Ciprofloxacin as Platforms for Bone Repair and Improved Resistance to Microbial Colonization

I. Mihailescu, C. Ristoscu, C. Hapenciuc, 2022, Pharmaceutics.

Biomaterial Thin Films by Soft Pulsed Laser Technologies for Biomedical Applications

I. Mihailescu, C. Ristoscu, E. Oner, 2014 .

Coatings Functionalization via Laser versus Other Deposition Techniques for Medical Applications: A Comparative Review

I. Mihailescu, M. Bădiceanu, A. Visan, 2022, Coatings.

Double-Layer Bioactive Glass Coatings Obtained by Pulsed Laser Deposition

I. Mihailescu, C. Ristoscu, M. Mitrić, 2007 .

Three-dimensional memory effect in fluorescent photosensitive glass activated by europium and cerium.

I. Mihailescu, I. Bibicu, E. Pavel, 1998, Optics letters.

Synthesis and Modification of Nanostructured Thin Films

I. Mihailescu, 2019, Nanomaterials.

Biocompatible and bioactive nanostructured glass coatings synthesized by pulsed laser deposition: In vitro biological tests

I. Mihailescu, L. Duta, A. Popescu, 2009 .

Pulsed Laser Deposition of Thin Coatings: Applications on Biomaterials

J. Faerber, I. Mihailescu, A. Carradò, 2010 .

Biomimetic nanocrystalline apatite coatings synthesized by Matrix Assisted Pulsed Laser Evaporation for medical applications

I. Mihailescu, D. Grossin, L. Duta, 2014 .

Biocompatible Mn2+-doped carbonated hydroxyapatite thin films grown by pulsed laser deposition.

M. Iliescu, I. Mihailescu, G. Socol, 2004, Journal of biomedical materials research. Part A.

Chemical growth of calcium phosphate layers on magnetron sputtered HA films

I. Mihailescu, I. Pasuk, L. Verestiuc, 2004 .

Structural, compositional, mechanical characterization and biological assessment of bovine-derived hydroxyapatite coatings reinforced with MgF2 or MgO for implants functionalization.

I. Mihailescu, L. Duta, F. Oktar, 2016, Materials science & engineering. C, Materials for biological applications.

Antimicrobial and Cytocompatible Bovine Hydroxyapatite-Alumina-Zeolite Composite Coatings Synthesized by Pulsed Laser Deposition from Low-Cost Sustainable Natural Resources

I. Mihailescu, C. Ristoscu, L. Duta, 2020 .

Processing of dense nanostructured HAP ceramics by sintering and hot pressing

I. Mihailescu, B. Jokić, Djordje N. Veljović, 2009 .

Transmission electron microscopy investigation of pulsed-laser deposited hydroxylapatite thin films prepared by tripod and focused ion beam techniques

J. Werckmann, M. Iliescu, V. Nelea, 2004 .

Active protein and calcium hydroxyapatite bilayers grown by laser techniques for therapeutic applications.

I. Mihailescu, S. Petrescu, E. Axente, 2013, Journal of biomedical materials research. Part A.

HYDROXYAPATITE PULSED LASER DEPOSITED THIN FILMS BEHAVIOUR WHEN SUBMITTED TO BIOLOGICAL SIMULATED TESTS

I. Mihailescu, G. Socol, C. Ristoscu, 2005 .

Simultaneous formation of titanium nitride and titanium silicide in a one-step process in heterogeneous phase during multipulse laser treatment of a Si wafer with a thin Ti coating in superatmospheric N2

N. Chitica, I. Mihailescu, A. Luches, 1994 .

Composite Drug Delivery System Based on Amorphous Calcium Phosphate–Chitosan: An Efficient Antimicrobial Platform for Extended Release of Tetracycline

I. Mihailescu, G. Bertrand, G. Socol, 2021, Pharmaceutics.

The Influence of the Microstructure and Morphology of CeO2 Buffer Layer on the Properties of YBCO Films PLD Grown on Ni Tape

I. Mihailescu, I. Enculescu, M. Socol, 2014, Journal of Superconductivity and Novel Magnetism.

Pulsed Laser Deposition of Hydroxyapatite Thin Films

Ion N. Mihailescu, Anand Doraiswamy, Miroslav Jelinek, 2007 .

Pulsed laser deposition of hydroxyapatite thin films on Ti-5Al-2.5Fe substrates with and without buffer layers

Ion N. Mihailescu, Carmen Ristoscu, V. Nelea, 2000 .

Hydroxyapatite thin films synthesized by pulsed laser deposition and magnetron sputtering on PMMA substrates for medical applications

I. Mihailescu, G. Socol, L. Duta, 2010 .

On the bioactivity of adherent bioglass thin films synthesized by magnetron sputtering techniques

I. Mihailescu, G. Stan, A. Popescu, 2010 .

Polymer-Bioglass Composite Coatings: A Promising Alternative For Advanced Biomedical Implants

I. Mihailescu, A. Popescu, L. Floroian, 2011 .

Polycaprolactone biopolymer thin films obtained by matrix assisted pulsed laser evaporation

I. Stamatin, I. Mihailescu, G. Socol, 2007 .

Biomaterials: New Issues and Breakthroughs for Biomedical Applications

V. Nelea, I. Mihailescu, M. Jelínek, 2006 .

Pulsed Laser Ablation : Advances and Applications in Nanoparticles and Nanostructuring Thin Films

I. Mihailescu, A. Caricato, 2018 .

Synthesis of functionally graded bioactive glass-apatite multistructures on Ti substrates by pulsed laser deposition

Ion N. Mihailescu, Gabriel Socol, Bojan Jokić, 2007 .

Laser Coatings via State-of-the-Art Additive Manufacturing: A Review

I. Mihailescu, C. Ristoscu, M. A. Mahmood, 2021, Coatings.

Laser additive manufacturing of Co-Cr alloy and the induced defects thereof

I. Mihailescu, C. Ristoscu, M. A. Mahmood, 2022, The International Journal of Advanced Manufacturing Technology.

La2O3-doped BaTiO3 thin films obtained by pulsed laser deposition

M. Iliescu, I. Mihailescu, C. Ristoscu, 2001 .

Influence of the deposition configuration on the composition, structure and morphology of La0.6Y0.07Ca0.33MnO3−δ thin films obtained by pulsed laser deposition

Carmen Ristoscu, J. Werckmann, Valentin Serban Teodorescu, 2001 .

Structural comparison between La0.60Y0.07Ca0.33MnO3−δ bulk and pulsed laser deposited thin films

J. Werckmann, I. Mihailescu, C. Sandu, 2000 .

Chromium oxides mixtures in PLD films investigated by Raman spectroscopy

I. Mihailescu, F. Guinneton, D. Savastru, 2010 .

Surface nitridation by multipulse excimer laser irradiation

I. Mihailescu, J. Zemek, A. Luches, 1990 .

Multi-pulse laser nitridation of titanium, zirconium and hafnium in a nitrogen atmosphere containing oxygen

S. A. Uglov, I. Ursu, A. Prokhorov, 1987 .

Surface nitridation of zirconium and hafnium by powerful cw CO2 laser irradiation in air.

M. Popescu, I. Ursu, A. Prokhorov, 1986, Applied optics.

On the mechanism of surface compound formation by powerful microsecond pulsed TEA CO2 laser irradiation in technical nitrogen

S. A. Uglov, I. Ursu, A. Prokhorov, 1985 .

Titanium and zirconium nitridation under the action of microsecond pulsed TEA CO2 laser radiation in technical nitrogen

M. Popescu, I. Ursu, A. Prokhorov, 1985 .

XRD Study of Pulsed Laser Deposited AIN Films with Nanosized Crystallites

I. Mihailescu, A. Szekeres, Á. Cziráki, 2008 .

Influence of in situ nitrogen pressure on crystallization of pulsed laser deposited AlN films

I. Mihailescu, A. Szekeres, Á. Cziráki, 2007 .

Structural transformations induced in amorphous free-standing 55wt.%Cr-45wt.%Ni thin films with 2.5 μs (10.6 μm) and 400 μs (0.69 μm) single laser pulses

I. Mihailescu, M. Dinescu, C. Constantin, 1986 .

Thin Films and Nanoparticles by Pulsed Laser Deposition: Wetting, Adherence, and Nanostructuring

I. Mihailescu, C. Ristoscu, 2018 .

Biocompatibility and bioactivity enhancement of Ce stabilized ZrO(2) doped HA coatings by controlled porosity change of Al(2) O(3) substrates.

I. Mihailescu, C. Ristoscu, S. Petrescu, 2011, Journal of biomedical materials research. Part B, Applied biomaterials.

Bioactive glass thin films synthesized by advanced pulsed laser techniques

I. Mihailescu, C. Ristoscu, G. Stan, 2016 .

Functionalized Antimicrobial Composite Thin Films Printing for Stainless Steel Implant Coatings

I. Mihailescu, C. Ristoscu, M. Badea, 2016, Molecules.

Composite biocompatible hydroxyapatite–silk fibroin coatings for medical implants obtained by Matrix Assisted Pulsed Laser Evaporation

I. Stamatin, I. Mihailescu, G. Socol, 2010 .

In vivo experimental study of implant-bone interaction.

I. Mihailescu, J. Neamțu, C. Pisoschi, 2009 .

Deposition of high quality TiN films by excimer laser ablation in reactive gas

I. Ursu, Ion N. Mihailescu, Armando Luches, 1993 .

Evidence of refractive index change by Ti indiffusion into LiNbO3 substrate as a result of multipulse free‐running ruby laser irradiation

N. Chitica, I. Mihailescu, M. Bertolotti, 1993 .

Direct oxinitride synthesis by multipulse excimer laser irradiation of silicon wafers in a nitrogen‐containing ambient environment

I. Mihailescu, V. Nassisi, A. Luches, 1990 .

Multilayer metallization structures with titanium nitride and titanium silicide prepared by multipulse laser irradiation

I. Ursu, Armando Luches, Gilberto Leggieri, 1988 .

Solid phase doping of silicon with boron by surface scanning with cw CO2 laser radiation

A. A. Manenkov, I. Ursu, A. Prokhorov, 1987 .

Direct synthesis of TiSi2 by a laser thermal self-aligned process

N. Chitica, I. Ursu, A. Prokhorov, 1992 .

Titanium silicide synthesis as an effect of cw CO2‐laser irradiation

I. Ursu, I. Mihailescu, V. Craciun, 1989 .

Growth and characterization of pulsed laser-deposited Mn–Zn ferrite thin films☆

R. Tomov, I. Mihailescu, C. Ristoscu, 2000 .

Multilayer titanium nitride and silicide structures synthesized by multipulse excimer laser irradiation

I. Mihailescu, A. Luches, P. Mengucci, 1992 .

Magnetic core/shell nanoparticle thin films deposited by MAPLE: Investigation by chemical, morphological and in vitro biological assays

I. Stamatin, I. Mihailescu, G. Socol, 2012 .

Direct nanocrystallite size investigation in microstrained mixed phase TiO2 nanoparticles by PCA of Raman spectra

I. Mihailescu, E. Tănasă, F. Dumitrache, 2019, Applied Surface Science.

Levan nanostructured thin films by MAPLE assembling.

I. Mihailescu, C. Ristoscu, M. Eroglu, 2011, Biomacromolecules.

Wettability of Nanostructured Surfaces

I. Mihailescu, L. Duta, A. Popescu, 2015 .

Matrix assisted pulsed laser evaporation processing of triacetate-pullulan polysaccharide thin films for drug delivery systems

I. Stamatin, I. Mihailescu, C. Ristoscu, 2006 .

Protected Laser Evaporation/Ablation and Deposition of Organic/Biological Materials: Thin Films Deposition for Nano- biomedical Applications

I. Mihailescu, C. Ristoscu, G. Popescu-Pelin, 2017 .

Biopolymer Thin Films Synthesized by Advanced Pulsed Laser Techniques

I. Mihailescu, C. Ristoscu, E. Axente, 2016 .

Matrix assisted pulsed laser evaporation of poly( D, L-lactide) thin films for controlled-release drug systems

I. Stamatin, I. Mihailescu, G. Socol, 2007 .

Matrix assisted pulsed laser evaporation of pullulan tailor-made biomaterial thin films for controlled drug delivery systems

I. Stamatin, I. Mihailescu, S. Grigorescu, 2007 .

Experiments of MAPLE thin film technology

I. N. Mihailescu, R. Cristescu, M. Jelinek, 2007, International School on Quantum Electronics: Laser Physics and Applications.

Stainless steel surface biofunctionalization with PMMA-bioglass coatings: compositional, electrochemical corrosion studies and microbiological assay

D. Munteanu, I. Mihailescu, C. Ristoscu, 2015, Journal of Materials Science: Materials in Medicine.

Influence of the liquid level and ablation process duration on the characteristics of nanostructures created by nanosecond laser ablation of Ag in water

I. N. Mihailescu, N. N. Nedyalkov, P. A. Atanasov, 2017, International School on Quantum Electronics: Laser Physics and Applications.

Time Resolved Spectrofluorimetry Studies of Excimer Laser- Chromatin Interactions

I. Mihailescu, I. Radulescu, L. Radu, 1997 .

Fabrication of magnetite-based core–shell coated nanoparticles with antibacterial properties

I. Mihailescu, G. Socol, D. Chrisey, 2015, Biofabrication.

Nitridation of Ti and Zr by multi-pulse TEA CO2 laser irradiation in liquid nitrogen

S. A. Uglov, M. Popescu, I. Ursu, 1986 .

Mathematical formalism of femtosecond laser-deoxyribonucleic acid interaction: thermal evolution

I. Mihailescu, C. Ristoscu, M. A. Mahmood, 2022, Heliyon.

Immobilization of urease by laser techniques: synthesis and application to urea biosensors.

I. Mihailescu, S. Petrescu, F. Sima, 2008, Journal of biomedical materials research. Part A.

Combinatorial matrix-assisted pulsed laser evaporation: Single-step synthesis of biopolymer compositional gradient thin film assemblies

I. Mihailescu, C. Ristoscu, M. Eroglu, 2012 .

Optoelectronics effects in modernization of advanced implants using periodical optical structure

Ion N. Mihailescu, Nicolae A. Enaki, Carmen Ristoscu, 2018, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies.

Synthesis of metallic and semiconductor nitrides by multipulse laser irradiation of solid samples in ambient gases

I. Ursu, I. Mihailescu, A. Luches, 1989 .

Crown-like structure development on titanium exposed to multipulse Nd:YAG laser irradiation

I. Mihailescu, Á. Pérez del Pino, P. Serra, 2002 .

Femtosecond laser surface patterning of steel and titanium alloy

I. Mihailescu, D. Milovanović, B. Radak, 2014 .

Fabrication of functional fibronectin patterns by nanosecond excimer laser direct write for tissue engineering applications

J. Werckmann, I. Mihailescu, S. Grigorescu, 2013, Journal of Materials Science: Materials in Medicine.

Nanocrystalline thin films with charge density wave ground state

I. Mihailescu, J. Demšar, G. Socol, 2013 .

Spark Discharge Action on a Cathode Surface in Air Atmosphere

I. Mihailescu, A. Popa, I. Apostol, 1987 .

Direct laser indiffusion of Ti into LiNbO3 single crystals

I. Ursu, I. Mihailescu, M. Bertolotti, 1992 .

UNIFIED THEORY OF TRANSFORMATION PLASTICITY AND THE EFFECT ON QUENCHING SIMULATION

V. Leskovšek, I. Mihailescu, C. Ristoscu, 2010 .

Sr-ferrite thin films grown on sapphire by pulsed laser deposition

R. Tomov, V. Nelea, I. Mihailescu, 2000 .

Oxidation interference in direct laser nitridation of titanium: relative merits of various ambient gases

I. Mihailescu, A. Luches, P. Mengucci, 1992 .

CNx/Si thin heterostructures for miniaturized temperature sensors

I. Mihailescu, A. Szekeres, E. Gyorgy, 2004 .

Nitridation of titanium by multipulse excimer laser irradiation

I. Mihailescu, A. Luches, P. Mengucci, 1990 .

Chromium oxides thin films prepared and coated in situ with gold by pulsed laser deposition

I. Mihailescu, G. Socol, F. Guinneton, 2005 .

Organic heterostructures based on arylenevinylene oligomers deposited by MAPLE

I. Mihailescu, G. Socol, M. Jelínek, 2014 .

Optimization of Cr8O21 targets for Pulsed Laser Deposition

I. Mihailescu, G. Socol, F. Guinneton, 2005 .

Multistage plasma initiation process by pulsed CO2 laser irradiation of a Ti sample in an ambient gas (He, Ar, or N2)

I. Mihailescu, J. Hermann, C. Boulmer-Leborgne, 1993 .

Simple method for obtaining exact nonrelativistic formulas for two-photon (n, l, m) continuum dipole transitions for hydrogenic atoms.

I. Mihailescu, F. D. Aaron, A. Costescu, 1986, Optics letters.

AlN:Cr thin films synthesized by pulsed laser deposition : Studies by X-ray diffraction and spectroscopic ellipsometry

I. Mihailescu, A. Szekeres, Á. Cziráki, 2009 .

Optimization of Cr8O12 Targets for Pulsed Laser Deposition.

I. Mihailescu, G. Socol, F. Guinneton, 2006 .

Functional porphyrin thin films deposited by matrix assisted pulsed laser evaporation

I. Stamatin, I. Mihailescu, D. Chrisey, 2010 .

Oxidation of Steel Samples in Air Under the Action of a Photodissociative Iodine Laser

I. Ursu, I. Mihailescu, L. Nistor, 1988 .

Comparative study on Pulsed Laser Deposition and Matrix Assisted Pulsed Laser Evaporation of urease thin films

I. Mihailescu, F. Sima, T. Smausz, 2009 .

Infrared photochemical properties of sensitized SO2O2 mixtures

N. Chitica, I. Mihailescu, D. Dumitras, 1996 .

Plasma diagnostics in pulsed laser TiN layer deposition

Ion N. Mihailescu, Armando Luches, Alessio Perrone, 1995 .

C-doped TiO2 nanotubes with pulsed laser deposited Bi2O3 films for photovoltaic application

I. Mihailescu, G. Socol, G. Stan, 2021, Ceramics International.

Pulsed laser deposition of barium hexaferrite (BaFe12O19) thin films

R. Tomov, I. Mihailescu, C. Ristoscu, 2000 .

Effects of roll pattern and reduction ratio on optical characteristics of A1008 cold–rolled steel specimens: analytical approach and experimental correlations

J. Lai, I. Mihailescu, M. A. Mahmood, 2020, The International Journal of Advanced Manufacturing Technology.

Multipulse excimer laser irradiation of FeB amorphous alloys

I. Mihailescu, D. Sorescu, A. Hening, 1993 .

Functionalized magnetite silica thin films fabricated by MAPLE with antibiofilm properties

D E Mihaiescu, I. Mihailescu, G. Socol, 2012, Biofabrication.

Optical recording in sulfur-selenium layers

M. Popescu, I. Mihailescu, G. Socol, 2004 .

Growth of Au–TiO2 nanocomposite thin films by a dual-laser, dual-target system

I. Mihailescu, M. Kompitsas, G. Sauthier, 2006 .

Diagnostic of molecular gaseous mixtures when heated by CW CO2 laser radiation

F. V. Bunkin, G. A. Shafeev, I. Ursu, 1987 .

CW CO2 Laser Annealing

L. C. Nistor, L. Nanu, Valentin Serban Teodorescu, 1983, Other Conferences.

Study of phase development and thermal stability in as synthesized TiO2 nanoparticles by laser pyrolysis: ethylene uptake and oxygen enrichment

I. Mihailescu, E. Vasile, C. Fleaca, 2018 .

MAPLE deposition of Mn(III) metalloporphyrin thin films: Structural, topographical and electrochemical investigations

I. Stamatin, I. Mihailescu, S. Grigorescu, 2011 .

Correlation between plasma expansion and damage threshold by femtosecond laser ablation of fused silica

M. Sentis, I. Mihailescu, E. Axente, 2008 .

Bridging the analytical and artificial neural network models for keyhole formation with experimental verification in laser melting deposition: A novel approach

I. Mihailescu, C. Ristoscu, A. Popescu, 2021, Results in Physics.

Matrix assisted pulsed laser evaporation of cinnamate-pullulan and tosylate-pullulan polysaccharide derivative thin films for pharmaceutical applications

I. Stamatin, I. Mihailescu, M. Jelínek, 2007 .

Studies of the change of a metallic surface microrelief as a result of multiple‐pulse action of powerful UV laser pulses

I. Ursu, A. Prokhorov, I. Mihailescu, 1985 .

Thin Film Fabrication by Pulsed Laser Deposition from TiO2 Targets in O2, N2, He, or Ar for Dye-Sensitized Solar Cells

I. Mihailescu, G. Socol, G. Popescu-Pelin, 2022, Coatings.

Numerical analysis of a nanowire grating plasmon

Dan Savastru, Sorin Miclos, Ion I. Lăncrănjan, 2013, Other Conferences.

Non-Destructive X-ray Characterization of a Novel Joining Method Based on Laser-Melting Deposition for AISI 304 Stainless Steel.

I. Mihailescu, D. Chioibasu, A. Popescu, 2021, Materials.

Laser synthesis of 2D heterostructures of transitional metal oxides for photo sensors with high sensitivity

I. Mihailescu, F. Miroiu, V. Nikirin, 2016 .

Metamaterials for Antimicrobial Biofilm Applications: Photonic Crystals of Microspheres and Optical Fibers for Decontamination of Liquids and Gases

I. Mihailescu, C. Ristoscu, N. Enaki, 2018 .

Surface treatment with linearly polarized laser beam at oblique incidence

Ion N. Mihailescu, Iulian Gutu, I. Mihailescu, 2002 .

Laser processing of natural mussel adhesive protein thin films

I. Mihailescu, R. Narayan, D. Chrisey, 2007 .

Functionalized Thin Films and Structures Obtained by Novel Laser Processing Issues

I. Mihailescu, M. Jelínek, D. Chrisey, 2006 .

Surface Morphology Studies of Sub-Ps Pulsed-Laser-Deposited AlN Thin Films

C. Fotakis, I. Mihailescu, Vassilia Zorba, 2004, Journal of Materials Research.

EVALUATION OF BIOCOMPATIBILITY AND BIOACTIVITY FOR POLYMETHYL METHACRYLATE – BIOACTIVE GLASS NANOCOMPOSITE FILMS OBTAINED BYMATRIX ASSISTED PULSED LASER EVAPORATION

I. Mihailescu, F. Sima, L. Floroian, 2010 .

Functional Bioglass—Biopolymer Double Nanostructure for Natural Antimicrobial Drug Extracts Delivery

I. Mihailescu, C. Ristoscu, M. Badea, 2020, Nanomaterials.

Laser Processing of Advanced Bioceramics

Boris N. Chichkov, Aleksandr Ovsianikov, Ion N. Mihailescu, 2005 .

Double layered nanostructured composite coatings with bioactive silicate glass and polymethylmetacrylate for biomimetic implant applications

I. Mihailescu, A. Popescu, M. Badea, 2010 .

Hydroxyapatite thin films synthesized by Pulsed Laser Deposition onto titanium mesh implants for cranioplasty applications

L. Duta, G. E. Stan, A. C. Popescu, 2013, Other Conferences.

Nanostructured ZnO coatings grown by pulsed laser deposition for optical gas sensing of butane

Ion N. Mihailescu, Carmen Ristoscu, Gabriel Socol, 2005 .

Femtosecond pulse shaping for phase and morphology control in PLD: Synthesis of cubic SiC

C. Fotakis, I. Mihailescu, G. Socol, 2006 .

Absorption boost of TiO2 nanotubes by doping with N and sensitization with CdS quantum dots

I. Mihailescu, G. Socol, Z. Rakočević, 2017 .

Temperature field modeling during multi-modes CO2 laser irradiation of human enamel

I. Mihailescu, F. Scarlat, Oane Mihai, 2007 .

The semi-analytical solution of the Fourier heat equation in beam – 3D inhomogeneous media interaction

I. Mihailescu, M. Oane, F. Scarlat, 2008 .

Laser synthesis of nanometric iron oxide films for thermo-sensing applications

I. Mihailescu, G. Socol, C. Ristoscu, 2014 .

Tailoring immobilization of immunoglobulin by excimer laser for biosensor applications.

I. Mihailescu, C. Ristoscu, I. Enculescu, 2011, Journal of biomedical materials research. Part A.

Shallow hydroxyapatite coatings pulsed laser deposited onto Al2O3 substrates with controlled porosity: correlation of morphological characteristics with in vitro testing results

I. Mihailescu, C. Ristoscu, S. Petrescu, 2009 .

Pulsed laser deposited zinc oxide thin films for optical gas sensor applications

Gabriel Socol, Ion N. Mihailescu, Eniko Gyoergy, 2005, International School on Quantum Electronics: Laser Physics and Applications.

Interfacial titanium oxide between hydroxyapatite and TiAlFe substrate

V. Nelea, I. Mihailescu, C. Morosanu, 2007, Journal of materials science. Materials in medicine.

A steady-state hot-wire method for thermal conductivity measurements of fluids

I. Mihailescu, C. Hapenciuc, T. Borca-Tasciuc, 2019, International Journal of Heat and Mass Transfer.

Crystallization of Amorphous 55wt%Cr-45wt%Ni Films Induced by 60 ns (0.694 μm) Single Laser Pulse

I. Ursu, I. Mihailescu, M. Dinescu, 1986 .

Laser Melting Deposition Additive Manufacturing of Ti6Al4V Biomedical Alloy: Mesoscopic In-Situ Flow Field Mapping via Computational Fluid Dynamics and Analytical Modelling with Empirical Testing.

I. Mihailescu, M. A. Mahmood, Asif Ur Rehman, 2021, Materials.

The effect of laser wavelength on the ablation rate of carbon

J. Hoffman, Z. Szymanski, S. Kucharski, 2014 .

Vanadium oxidation as a result of cw CO2 laser irradiation in atmospheric air

I. Ursu, I. Mihailescu, M. Dinescu, 1984 .

Calculation of the Absorptivity of CO 2 -laser Radiation within a Multilayer Oxide-metal System

I. Mihailescu, L. Tătar, Marcela Tutunaru, 1986 .

Studies of Metal Oxidation under the Action of CW — CO2 Laser Radiation

N. I. Chapliev, I. Ursu, A. Prokhorov, 1986 .

Electron-microscopy investigations of the damage of aluminium mirrors as a result of repeated powerful microsecond pulsed TEA-CO2 laser irradiation in air

N. I. Chapliev, I. Ursu, A. Prokhorov, 1984 .

A study of the compounds which are induced on the metallic target surface under the action of a pulsed laser plasmatron

I. Ursu, N. I. Chapliev, A. M. Prokhorov, 1982 .

Tunable optical properties of laser grown double‐structures with gold nanoparticlesand zinc oxide thin films

I. Mihailescu, M. Kompitsas, E. Gyorgy, 2008 .

Accurate analysis of indium–zinc oxide thin films via laser-induced breakdown spectroscopy based on plasma modeling

Catalin Luculescu, Valentin Craciun, Ion N. Mihailescu, 2014 .

Multi-photon temperature profile modeling in solids during powerful pulse laser irradiation

I. Mihailescu, G. Georgescu, M. Oane, 2008 .

High quality amorphous indium zinc oxide thin films synthesized by pulsed laser deposition

S. Pearton, D. Norton, I. Mihailescu, 2011 .

Enhanced absorption of TiO2 nanotubes by N-doping and CdS quantum dots sensitization: insight into the structure

I. Mihailescu, G. Socol, O. Ersen, 2018, RSC advances.

SURFACE MELTING AND THERMAL ABLATION PATTERNS INDUCED IN ENAMEL AND CEMENTUM BY10.6-m TEA-CO2LASER RADIATION. II. THEORETICAL MODELS FOR RADIATION-ENAMEL INTERACTIONS

I. Mihailescu, H. Hulubei, E. Preoteasa, 2014 .

Thin films of arylenevinylene oligomers prepared by MAPLE for applications in non-linear optics

I. Mihailescu, G. Socol, M. Girtan, 2011 .

Investigation of nitrogen and iron co-doped TiO2 films synthesized in N2/CH4 via pulsed laser deposition technique

I. Mihailescu, C. Ristoscu, G. Popescu-Pelin, 2020, Applied Nanoscience.

The effect of the contact point asymmetry on the accuracy of thin films thermal conductivity measurement by scanning thermal microscopy using Wollaston probes

I. Mihailescu, C. Hapenciuc, T. Borca-Tasciuc, 2022, Journal of Applied Physics.

TiO2/ZrO2 THIN FILMS SYNTHESIZED BY PLD IN LOW PRESSURE N-, C- AND/OR O-CONTAINING GASES: STRUCTURAL, OPTICAL AND PHOTOCATALYTIC PROPERTIES

I. Mihailescu, G. Socol, C. Ristoscu, 2012 .

Synthesis of biomaterial thin films by pulsed laser technologies: Electrochemical evaluation of bioactive glass-based nanocomposite coatings for biomedical applications

I. Mihailescu, C. Ristoscu, G. Popescu-Pelin, 2012 .

Behavior of pulsed laser deposited hydroxyapatite thin films under simulated biological conditions

Emanuel Axente, I. N. Mihailescu, S. Grigorescu, 2007, Advanced Laser Technologies.

Thin films of polymer mimics of cross-linking mussel adhesive proteins deposited by matrix assisted pulsed laser evaporation

I. Stamatin, I. Mihailescu, R. Narayan, 2009 .

Laser deposition of fibrinogen blood proteins thin films by matrix assisted pulsed laser evaporation

Ion N. Mihailescu, Michal Jelínek, Douglas B. Chrisey, 2005 .

Estimation of clad geometry and corresponding residual stress distribution in laser melting deposition: analytical modeling and experimental correlations

I. Mihailescu, C. Ristoscu, A. Popescu, 2020, The International Journal of Advanced Manufacturing Technology.

Influence of the scanning conditions on the characteristics of the nanostructures fabricated by laser ablation in liquid

Nikolay N. Nedyalkov, Ion N. Mihailescu, Carmen Ristoscu, 2015, Other Conferences.

Thin carbon nitride films deposited by laser ablation with an XeCl excimer laser

Ion N. Mihailescu, Armando Luches, Alessio Perrone, 1998, Other Conferences.

Carbon nitride films deposited by reactive laser ablation

Ion N. Mihailescu, Armando Luches, Alessio Perrone, 1998 .

Characterization of C-N thin films deposited by reactive excimer laser ablation of graphite targets in nitrogen atmosphere

M. Popescu, I. Mihailescu, G. Barucca, 1997 .

Parametric study of C-N films deposited by reactive laser ablation

Ion N. Mihailescu, A. P. Caricato, Armando Luches, 1997, Other Conferences.

Deposition of CN films by reactive laser ablation

Ion N. Mihailescu, S. Acquaviva, Armando Luches, 1996 .

Thin films of vitronectin transferred by MAPLE

I. Mihailescu, K. Anselme, F. Sima, 2011 .

Influence of the surface treatment of the substrate in the LCVD of CNx films

A. Crunteanu, V. Nelea, I. Mihailescu, 1998 .

Influence of process parameters on CNX films obtained by laser-CVD at two wavelengths

A. Crunteanu, I. Mihailescu, C. Martin, 1998 .

Fourier two-temperature model to describe ultrafast laser pulses interaction with metals: A novel mathematical technique

I. Mihailescu, C. Ristoscu, M. Oane, 2021 .

Growth of vertically oriented films of carbon nanotubes by activated catalytic chemical vapor deposition on Fe–Co/TiN/Si(100) substrates

I. Mihailescu, G. Socol, M. Marco de Lucas, 2008 .

Optical studies of (AsSe)100−xSbx thin films

J. Reithmaier, I. Mihailescu, C. Ristoscu, 2011 .

Influence of the preparation method on the As-Se-AgI thin films behaviour

I. Mihailescu, G. Socol, P. Petkov, 2008 .

About the nature of particulates covering the surface of thin films obtained by reactive pulsed laser deposition

I. Mihailescu, A. Luches, V. Teodorescu, 1998 .

Hydroxyapatite thin films growth by pulsed laser deposition: effects of the Ti alloys substrate passivation on the film properties by the insertion of a TiN buffer layer

Cornel Ghica, Ion N. Mihailescu, Carmen Ristoscu, 2001, ROMOPTO International Conference on Micro- to Nano- Photonics.

Trends in the Development of Machinery and Associated Technology ” TMT 2010 , Mediterranean Cruise , 11-18 September 2010 INFLUENCE OF THERMODIFFUSION TREATMENTS ON IMPROVEMENT OF SURFACE LAYERS PROPERTIES CREATED ON LOW-CARBON AND LOW-ALLOYED STEELS

I. Mihailescu, D. Krumes, I. Kladari, 2010 .

Spatter Formation and Splashing Induced Defects in Laser-Based Powder Bed Fusion of AlSi10Mg Alloy: A Novel Hydrodynamics Modelling with Empirical Testing

I. Mihailescu, A. Popescu, M. A. Mahmood, 2021, Metals.

High‐intensity laser irradiation of metallic surfaces covered by periodic structures

I. Ursu, A. Prokhorov, I. Mihailescu, 1987 .

The study of a crater forming on the surface of a Ti target submitted to multipulse excimer laser irradiation under low pressure N2

I. Mihailescu, J. Hermann, A. Luches, 1996 .

Modification of AlN thin films morphology and structure by temporally shaping of fs laser pulses used for deposition

C. Fotakis, I. Mihailescu, G. Socol, 2011 .

Influence of laser pulse frequency on the microstructure of aluminum nitride thin films synthesized by pulsed laser deposition

I. Mihailescu, A. Szekeres, L. Duta, 2017 .

Multi-stage pulsed laser deposition of aluminum nitride at different temperatures

I. Mihailescu, A. Szekeres, Z. Fogarassy, 2016 .

Morphology evolution and local electric properties of Au nanoparticles on ZnO thin films

I. Mihailescu, J. Santiso, M. Kompitsas, 2005 .

VIS/IR spectroscopy of thin AIN films grown by pulsed laser deposition at 400°C and 800°C and various N2 pressures

I. Mihailescu, A. Szekeres, G. Socol, 2014 .

Effect of Pulse Laser Duration and Shape on PLD Thin Films Morphology and Structure

I. Mihailescu, C. Ristoscu, 2011 .

Optical properties of aluminium nitride films obtained by pulsed laser deposition: an ellipsometric study

I. Mihailescu, A. Szekeres, S. Grigorescu, 2006 .

Role of laser pulse duration and ambient nitrogen pressure in deposition of AlN thin films

Ion N. Mihailescu, Carmen Ristoscu, Gabriel Socol, 2004, ROMOPTO International Conference on Micro- to Nano- Photonics.

Effects of pulse laser duration and ambient nitrogen pressure in PLD of AlN

C. Fotakis, I. Mihailescu, C. Ristoscu, 2004 .

AlN thin films obtained by pulsed laser deposition and reactive sputtering

F. Craciunoiu, Ion N. Mihailescu, Carmen Ristoscu, 2003, 2003 International Semiconductor Conference. CAS 2003 Proceedings (IEEE Cat. No.03TH8676).

CNx thin films obtained by laser induced CVD in different gas–substrate systems

Aurelian Crunteanu, Ion N. Mihailescu, Rodica Alexandrescu, 1997 .

Dependence of morphology of AlN thin films on laser irradiation in pulsed laser deposition

C. Fotakis, I. Mihailescu, C. Ristoscu, 2003 .

Zirconium and titanium nitridation by repeated action of a breakdown plasma induced in nitrogen as a result of microsecond-pulsed TEA CO2 laser irradiation.

S. A. Uglov, I. Ursu, A. Prokhorov, 1986, Applied optics.

One-step surface implantation and reaction by laser irradiation of multistructures deposited on Si and Ge samples

I. Ursu, I. Mihailescu, A. Luches, 1990 .

Laser power absorbed outside the beam spot on a rippled metallic surface as determined by a matrix calorimetric method

I. Ursu, A. Prokhorov, I. Mihailescu, 1988 .

Periodic structures on the surface of fused silica under multipulse 10.6-[mgr ]m laser irradiation.

V N Tokarev, I. Ursu, A. Prokhorov, 1985, Applied optics.

Energy transfer and size effects by laser irradiation of solid (metallic) samples presenting surface periodical structures basic processes and applications

I. Ursu, A. Prokhorov, I. Mihailescu, 1989 .

The Dependence of Linearly Polarized TEA-CO2 Laser Radiation Absorption on the Surface of a Metallic Sample on its Geometric Shape

I. Ursu, A. Prokhorov, I. Mihailescu, 1986 .

Study of the charge transport mechanism in pulsed laser deposited AlN:Cr films

I. Mihailescu, A. Szekeres, C. Ristoscu, 2010 .

Study of the charge transport mechanism in AlN:Cr films synthesized by pulsed laser deposition

I. Mihailescu, A. Szekeres, C. Ristoscu, 2010 .

Trap space charge limited current in pulsed laser deposited AlN:Cr films

I. Mihailescu, A. Szekeres, G. Socol, 2009, 2009 International Semiconductor Conference.