K. Chiang

发表

Optimization of the WEDM process of particle-reinforced material with multiple performance characteristics using grey relational analysis

K. Chiang, Fu-Ping Chang, 2006 .

Application of grey-fuzzy logic on the optimal process design of an injection-molded part with a thin shell feature

K. Chiang, Fu-Ping Chang, 2006 .

Investigating the machinability evaluation of Hadfield steel in the hard turning with Al2O3/TiC mixed ceramic tool based on the response surface methodology

J. Horng, K. Chiang, N. Liu, 2008 .

Application of response surface methodology in the parametric optimization of a pin-fin type heat sink ☆

K. Chiang, Fu-Ping Chang, 2006 .

Optimum design parameters of Pin-Fin heat sink using the grey-fuzzy logic based on the orthogonal arrays ☆

K. Chiang, Fu-Ping Chang, Te-Chang Tsai, 2006 .

Application of response surface methodology in describing the thermal performances of a pin-fin heat sink

K. Chiang, N. Liu, Chih-Chung Chou, 2009 .

Optimization of the design parameters of Parallel-Plain Fin heat sink module cooling phenomenon based on the Taguchi method

Ko-Ta Chiang, K. Chiang, 2005 .

Transient temperature analysis of a cylindrical heat equation

K. Chiang, Y. Hsiao, K. Kung, 2009 .

Blanching resistant Cu-Cr coating by vacuum plasma spray

K. Chiang, J. Yuen, P. Krotz, 1995 .

Boundary effects on the Bénard-Marangoni instability under an electric field

K. Chiang, M. Char, 1994 .

Stability analysis of Benard-Marangoni convection in fluids with internal heat generation

K. Chiang, M. Char, 1994 .

Formation of alumina on NbAl alloys

K. Chiang, G. H. Meier, R. Perkins, 1988 .

Materials characterization of silicon carbide reinforced titanium (Ti/SCS-6) metal matrix composites: Part I. Tensile and fatigue behavior

K. Chiang, P. Liaw, E. Diaz, 1995 .

Fatigue behavior of silicon carbide reinforced titanium (Ti/SCS-6) metal matrix composites

K. Chiang, P. Liaw, E. Diaz, 1995 .

Materials characterization of silicon carbide reinforced titanium (Ti/SCS-6) metal matrix composites: Part II. Theoretical modeling of fatigue behavior

K. Chiang, P. Liaw, E. Diaz, 1995 .

Modeling and analyzing the effects of air-cooled turning on the machinability of Ti–6Al–4V titanium alloy using the cold air gun coolant system

K. Chiang, Nun-Ming Liu, Chen-Ming Hung, 2012, The International Journal of Advanced Manufacturing Technology.

Experimental investigation of tool vibration and surface roughness in the precision end-milling process using the singular spectrum analysis

K. Chiang, Chih-Cherng Chen, Nun-Ming Liu, 2012, The International Journal of Advanced Manufacturing Technology.

Modeling and analyzing the effects of heat treatment on the characteristics of magnesium alloy joint welded by the tungsten-arc inert gas welding

D. Tsai, K. Chiang, Te-Chang Tsai, 2011 .

Aluminization of copper for oxidation protection

K. Chiang, J. Yuen, K. J. Kallenborn, 1992 .

Dynamic Oxidation Performance of NARloy-Z with Cu-30 Volume Percent Cr Coating

K. Chiang, R. Clark, T. Wallace, 1998 .

Effect of Alloying, Rapid Solidification, and Surface Kinetics on the High Temperature Environmental Resistance of Niobium

R. A. Miller, K. Chiang, G. H. Meier, 1987 .

Oxidation behavior of CuNb microcomposites

K. Chiang, N. Paton, J. Yuen, 1992 .

The use of D-optimal design for modeling and analyzing the vibration and surface roughness in the precision turning with a diamond cutting tool

Chih-Chung Chou, Chih-Cherng Chen, Ko-Ta Chiang, 2011 .

Modeling and Analysis of Machinability Evaluation in the Wire Electrical Discharge Machining (WEDM) Process of Aluminum Oxide-Based Ceramic

Kuang-Yuan Kung, Ko-Ta Chiang, K. Chiang, 2008 .

Analysis of shrinkage and warpage in an injection-molded part with a thin shell feature using the response surface methodology

Ko-Ta Chiang, Fu-Ping Chang, K. Chiang, 2007 .

Modeling and analysis of the effects of processing parameters on the performance characteristics in the high pressure die casting process of Al–SI alloys

Ko-Ta Chiang, Nun-Ming Liu, Te-Chang Tsai, 2009 .

Machining parameters optimization on the die casting process of magnesium alloy using the grey-based fuzzy algorithm

Chih-Chung Chou, Ko-Ta Chiang, Nun-Ming Liu, 2008 .

Creep of uncoated and Cu–Cr coated NARloy–Z

R. J. Walter, K. Chiang, 1999 .

Modeling and analyzing the effects of air-cooled turning on the machinability of Ti–6Al–4V titanium alloy using the cold air gun coolant system

Ko-Ta Chiang, Nun-Ming Liu, K. Chiang, 2013 .

Hot gas erosion resistance of a vapor-deposited Cu–Cr coating

K. Chiang, 1999 .

Oxidation kinetics of Cu-30vol.%Cr coating

K. Chiang, J. P. Ampaya, 1996 .

Designing parameter optimization of a Parallel-Plain Fin heat sink using the grey-based fuzzy algorithm with the orthogonal arrays

Chih-Chung Chou, Ko-Ta Chiang, Jenn-Tsong Horng, 2009 .

The method of grey-fuzzy logic for optimizing multi-response problems during the manufacturing process: a case study of the light guide plate printing process

Ko-Ta Chiang, Jenn-Tsong Horng, Nun-Ming Liu, 2009 .

The optimal process conditions of an injection-molded thermoplastic part with a thin shell feature using grey-fuzzy logic: A case study on machining the PC/ABS cell phone shell

Ko-Ta Chiang, K. Chiang, 2007 .

Experimental investigation of tool vibration and surface roughness in the precision end-milling process using the singular spectrum analysis

Chih-Cherng Chen, Ko-Ta Chiang, Nun-Ming Liu, 2012 .

Analyzing the design of vibration reduction with the rubber-layered laminates in the precision turning with a diamond cutting tool

Chih-Cherng Chen, Ko-Ta Chiang, K. Chiang, 2011 .

Modeling and analysis of the edge disintegration in the EDM drilling cobalt-bonded tungsten carbide

Chih-Cherng Chen, Ko-Ta Chiang, Jenn-Tsong Horng, 2010 .

Modeling and analysis of the effects of machining parameters on the performance characteristics in the EDM process of Al2O3+TiC mixed ceramic

Ko-Ta Chiang, K. Chiang, 2008 .

Effect of a non-uniform basic temperature gradient on the onset of Bénard-Marangoni convection: Stationary and oscillatory analyses☆

K. Chiang, 2005 .

Oscillatory instability analysis of Bénard-Marangoni convection in a rotating fluid under a uniform magnetic field

K. Chiang, Fu-Ping Chang, 1998 .

Oscillatory instability analysis of Bénard-Marangoni convection in a rotating fluid with internal heat generation

K. Chiang, M. Char, J. Jou, 1997 .

The effects of deposits of CaO, CaSO4, and MgO on the oxidation of several Cr2O3-forming and Al2O3-forming alloys

K. Chiang, G. H. Meier, R. Perkins, 1984 .

Low temperature hot corrosion

K. Chiang, F. Pettit, G. H. Meier, 1983 .

Material removal rate and electrode wear ratio study on the powder mixed electrical discharge machining of cobalt-bonded tungsten carbide

Kuang-Yuan Kung, Ko-Ta Chiang, Jenn-Tsong Horng, 2009 .

A grey and fuzzy algorithms integrated approach to the optimization of turning Hadfield steel with Al2O3/TiC mixed ceramic tool

Ko-Ta Chiang, Jenn-Tsong Horng, J. Horng, 2008 .

Modeling and analysis of the rapidly resolidified layer of SG cast iron in the EDM process through the response surface methodology

De-Chang Tsai, Ko-Ta Chiang, Fu-Ping Chang, 2007 .

Modeling and optimization of designing parameters for a parallel-plain fin heat sink with confined impinging jet using the response surface methodology

Ko-Ta Chiang, K. Chiang, 2007 .

Effect of interfacial deformation on the onset of convective instability in a doubly diffusive fluid layer

K. Chiang, M. Char, 1996 .

Dynamic oxidation of a Cu—30vol.%Cr coating on a copper-based alloy

K. Chiang, R. Clark, T. Wallace, 1996 .