D. Mohotti

发表

Numerical simulation of impact and penetration of ogvial shaped projectiles through steel plate structures

Priyan Mendis, Tuan Ngo, Damith Mohotti, 2011 .

Use of Coupled Smooth-Particle Hydrodynamics/Lagrangian Method in the Simulation of Deformable Projectile Penetration

P. Mendis, T. Ngo, D. Mohotti, 2015 .

Comparison of Reynolds Averaging Navier-Stokes (RANS) turbulent models in predicting wind pressure on tall buildings

D. Mohotti, K. Wijesooriya, D. Dias‐da‐Costa, 2019, Journal of Building Engineering.

Evaluation of effectiveness of polymer coatings in reducing blast-induced deformation of steel plates

D. Mohotti, A. Remennikov, D. Weerasinghe, 2020 .

Experimental and numerical study on mean pressure distributions around an isolated gable roof building with and without openings

Kapil Chauhan, Damith Mohotti, F. Xing, 2018 .

Wind loads on a super-tall slender structure: A validation of an uncoupled fluid-structure interaction (FSI) analysis

D. Mohotti, A. Amin, K. Wijesooriya, 2020 .

Numerical investigation of scale resolved turbulence models (LES, ELES and DDES) in the assessment of wind effects on supertall structures

D. Mohotti, K. Wijesooriya, D. Dias‐da‐Costa, 2019, Journal of Building Engineering.

Study on localised wind pressure development in gable roof buildings having different roof pitches with experiments, RANS and LES simulation models

F. Xing, D. Mohotti, K. Chauhan, 2018, Building and Environment.

Experimental investigation and simplified modeling of response of steel plates subjected to close-in blast loading from spherical liquid explosive charges ☆

T. Ngo, D. Mohotti, B. Uy, 2017 .

Incorporation of shear thickening fluid effects into computational modelling of woven fabrics subjected to impact loading: A review

D. Mohotti, D. Weerasinghe, Jeremy Anderson, 2020 .

Quasi-Static Behavior of Palm-Based Elastomeric Polyurethane: For Strengthening Application of Structures under Impulsive Loadings

Sri Devi Ravana, D. Mohotti, A. Mutalib, 2016, Polymers.

Ballistic performance of multi-metal systems

D. Mohotti, S. Raman, D. Weerasinghe, 2020 .

Behaviour of concrete specimens retrofitted with bio-based polyurethane coatings under dynamic loads

D. Mohotti, A. Mutalib, S. Raman, 2021 .

Development of a Coated Fabric Armour System of Aramid Fibre and Rubber

D. Mohotti, P. Hazell, M. Bambach, 2022, Thin-Walled Structures.

Implications of impact experiments on honeycomb shielded exterior beam-column joint

A. Rajeev, D. Mohotti, A. Shelke, 2020 .

Wind Design of Tall Buildings: The State of the Art

P. Mendis, Yousef Abu-Zidan, T. Gunawardena, 2022, Electronic Journal of Structural Engineering.

Application of Computational Fluid Dynamics (CFD) in predicting the wind loads on tall buildings - a case study

P. Mendis, T. Ngo, D. Mohotti, 2014 .

Rate dependent tensile behavior of polyurethane under varying strain rates

D. Mohotti, K. Badri, A. Mutalib, 2020 .

Out-of-plane impact resistance of aluminium plates subjected to low velocity impacts

Tuan Ngo, Priyan Mendis, Dong Ruan, 2013 .

The use of polyurethane for structural and infrastructural engineering applications: A state-of-the-art review

D. Mohotti, D. Mohotti, A. Mutalib, 2018, Construction and Building Materials.

Plastic deformation of polyurea coated composite aluminium plates subjected to low velocity impact

P. Mendis, T. Ngo, D. Mohotti, 2014 .

Strain rate dependent constitutive model for predicting the material behaviour of polyurea under high strain rate tensile loading

Tuan Ngo, Priyan Mendis, Damith Mohotti, 2014 .

Hyper-viscoelastic constitutive models for predicting the material behavior of polyurethane under varying strain rates and uniaxial tensile loading

D. Mohotti, A. Mutalib, S. Raman, 2020 .

Prediction of plywood deformation under the impact of windborne debris using Taguchi method

D. Mohotti, O. Al-Qassag, O. Al-Kubaisi, 2020, IOP Conference Series: Materials Science and Engineering.

Polyurea coated composite aluminium plates subjected to high velocity projectile impact

Tuan Ngo, Priyan Mendis, Sudharshan Naidu Raman, 2013 .

Ballistic impact response of monolithic steel and tri-metallic steel–titanium–aluminium armour to nonrigid NATO FMJ M80 projectiles

D. Mohotti, M. Bambach, D. Weerasinghe, 2023, Thin-Walled Structures.

An Innovative Approach of Using Continuous Impedance-Graded Metallic Composite System for Attenuation of Stress Waves

D. Mohotti, A. Remennikov, P. Fernando, 2019, Journal of Applied Mechanics.

Experimental, numerical and analytical study on the shock wave propagation through impedance-graded multi-metallic systems

D. Mohotti, P. Hazell, A. Remennikov, 2020, International Journal of Mechanical Sciences.

On the impact response of UHMWPE woven fabrics: Experiments and simulations

D. Mohotti, P. Hazell, V. Shim, 2021 .

Practical countermeasures for the aerodynamic performance of long-span cable-stayed bridges with open decks

Rui Zhou, Priyan Mendis, Yaojun Ge, 2015 .

A technical review of computational fluid dynamics (CFD) applications on wind design of tall buildings and structures: Past, present and future

C. Lee, P. Mendis, D. Mohotti, 2023, Journal of Building Engineering.

Comparison between an uncoupled one-way and two-way fluid structure interaction simulation on a super-tall slender structure

Kapil Chauhan, Damith Mohotti, K. Wijesooriya, 2021 .

An uncoupled fluid structure interaction method in the assessment of structural responses of tall buildings

Kapil Chauhan, K. Wijesooriya, D. Mohotti, 2020 .

Analytical and numerical investigation of polyurea layered aluminium plates subjected to high velocity projectile impact

Tuan Ngo, Priyan Mendis, Sudharshan Naidu Raman, 2015 .

Stress propagation and debonding effects in impedance-graded multi-metallic systems under impact loading

D. Mohotti, A. Remennikov, A. Amin, 2020 .

Impact Resistance and Yarn Pull-Out Behaviour of Polymer Spray-Coated UHMWPE Fabrics

D. Mohotti, P. Hazell, Hongxu Wang, 2022, Materials Today Communications.

Behaviour of explosively welded impedance-graded multi-metal composite plates under near-field blast loads

D. Mohotti, A. Remennikov, P. Fernando, 2019, International Journal of Mechanical Sciences.

Aerodynamic instability performance of twin box girders for long-span bridges

Rui Zhou, Yaojun Ge, Priyan Mendis, 2015 .

Ballistic impact response of flexible and rigid UHMWPE textile composites: Experiments and simulations

D. Mohotti, P. Hazell, Hongxu Wang, 2022, Defence Technology.

Numerical Modelling of the Rate-sensitive Behaviour of High-performance Fabrics

D. Mohotti, D. Weerasinghe, J. Anderson, 2020, Journal of Dynamic Behavior of Materials.

INVESTIGATION AND SIMPLIFIED MODELING OF 1 RESPONSE OF STEEL PLATES SUBJECTED TO CLOSE-IN BLAST LOADING 2 FROM SPHERICAL LIQUID EXPLOSIVE CHARGES 3 4 5

T. Ngo, D. Mohotti, B. Uy, 2017 .

Use Of Multi Layered Composite Plate Systems In Ballistic Impact Mitigation

P. Mendis, D. Mohotti, T. Ngo, 2015 .

Behaviour of polymer-filled–concrete–steel double-skin tubular columns under combined lateral impact and axial compression loading

C. Lee, D. Mohotti, D. Weerasinghe, 2023, Structures.

Blast Studies on Bridges – A State-of-the-Art Review

P. Mendis, T. Ngo, Lihai Zhang, 2014, Electronic Journal of Structural Engineering.

Predicting transient wind loads on tall buildings in three-dimensional spatial coordinates using machine learning

D. Mohotti, D.P.P. Meddage, K. Wijesooriya, 2024, Journal of Building Engineering.

con-Blast Studies on Bridges – A State-of-the-Art Review

M. Sofi, P. Mendis, T. Ngo, 2015 .

Predicting adhesion strength of micropatterned surfaces using gradient boosting models and explainable artificial intelligence visualizations

D. Mohotti, D. Meddage, I. Ekanayake, 2023, Materials Today Communications.

Influence of the cover plate thickness on the ballistic penetration of re-entrant auxetic structures

D. Mohotti, P. Hazell, D. Weerasinghe, 2024, International Journal of Impact Engineering.

Low-velocity impact response and energy absorption of Menger sponge-inspired fractal structures fabricated by selective laser melting

D. Mohotti, Hongxu Wang, K. Wijesooriya, 2024, Engineering Structures.

Energy absorption and mechanical performance of 3D printed Menger fractal structures

D. Mohotti, P. Hazell, Hongxu Wang, 2024, Engineering Structures.