V. Popov

发表

Design and 3D-printing of titanium bone implants: brief review of approach and clinical cases

Anastasia Kolomiets, Evgeny Strokin, Vladimir V. Jr. Popov, 2018, Biomedical engineering letters.

Effect of Hot Isostatic Pressure treatment on the Electron-Beam Melted Ti-6Al-4V specimens

V. Popov, E. Strokin, A. Katz-Demyanetz, 2018 .

Powder-bed additive manufacturing for aerospace application: Techniques, metallic and metal/ceramic composite materials and trends

V. Popov, A. Kovalevsky, A. Katz-Demyanetz, 2019, Manufacturing Review.

Selective electron beam melting of Al0.5CrMoNbTa0.5 high entropy alloys using elemental powder blend

V. Popov, A. Katz-Demyanetz, A. Koptyug, 2019, Heliyon.

High entropy Al0.5CrMoNbTa0.5 alloy: Additive manufacturing vs. casting vs. CALPHAD approval calculations

V. Popov, A. Katz-Demyanetz, M. Bamberger, 2020 .

Compositionally-tailored steel-based materials manufactured by electron beam melting using blended pre-alloyed powders

Lars-Erik Rännar, V. Popov, A. Katz-Demyanetz, 2020 .

Complex Concentrated Alloys for Substitution of Critical Raw Materials in Applications for Extreme Conditions

V. Popov, B. Șerban, I. Badea, 2021, Materials.

Additive manufacturing to veterinary practice: recovery of bony defects after the osteosarcoma resection in canines

V. Popov, G. Muller-Kamskii, A. Kovalevsky, 2019, Biomedical Engineering Letters.

Advantages of 3D Printing for Gynecology and Obstetrics: Brief Review of Applications, Technologies, and Prospects

E. Kudryavtseva, V. Popov, G. Muller-Kamskii, 2020, 2020 IEEE 10th International Conference Nanomaterials: Applications & Properties (NAP).

The analysis of concreting process impacts on the behaviour of residual liners of cast-in-situ voided slabs

V. Popov, B. Jonaitis, J. Valivonis, 2015 .

Toxicological evaluation of MnAl based permanent magnets using different in vitro models.

V. Popov, C. Rumbo, K. Skokov, 2021, Chemosphere.

Production of Al Metal Matrix Composites Reinforced With Carbon Nanotubes by Two-Stage Melt-Based HPDC-CE Method

V. Popov, A. Katz-Demyanetz, N. Larianovsky, 2018, Journal of Engineering Materials and Technology.

Reaction bonding of silicon carbides by Binder Jet 3D-Printing, phenolic resin binder impregnation and capillary liquid silicon infiltration

V. Popov, G. Muller-Kamskii, A. Kovalevsky, 2019, Ceramics International.

Powder Bed Fusion Additive Manufacturing Using Critical Raw Materials: A Review

V. Popov, A. Katz-Demyanetz, A. Koptyug, 2021, Materials.

Corrosion Resistance of Al–CNT Metal Matrix Composites

V. Popov, D. Safranchik, Alla Pismenny, 2021, Materials.

Developing New Materials for Electron Beam Melting: Experiences and Challenges

V. Popov, E. Chudinova, A. Koptyug, 2018, Materials Science Forum.

Comparative Study on H20 Steel Billets: Additive Manufacturing vs. Powder Metallurgy

V. Popov, S. Vijay, S. Nasar, 2021, Physics of Metals and Metallography.

Synthesis of Refractory High-Entropy Alloy WTaMoNbV by Powder Bed Fusion Process Using Mixed Elemental Alloying Powder

V. Popov, E. Strokin, D. Eliezer, 2022, Materials.

The effect of powder recycling on the mechanical properties and microstructure of electron beam melted Ti-6Al-4 V specimens

V. Popov, A. Katz-Demyanetz, A. Garkun, 2018, Additive Manufacturing.

Novel hybrid method to additively manufacture denser graphite structures using Binder Jetting

V. Popov, G. Muller-Kamskii, A. Katz-Demyanetz, 2021, Scientific Reports.

Production of net-shape Mn-Al permanent magnets by electron beam melting

V. Popov, A. Kovalevsky, A. Koptyug, 2019 .

Prospects of additive manufacturing of rare-earth and non-rare-earth permanent magnets

Gary Muller, Andrey Koptyug, Vladimir V. Popov, 2018 .

RC Beams strengthened with HPFRCC: Experimental and numerical results

V. Popov, J. Valivonis, M. Daugevičius, 2016 .

Hybrid additive manufacturing of steels and alloys

V. Popov, A. Fleisher, 2020, Manufacturing Review.

Compression deformation and fracture behavior of additively manufactured Ti-6Al-4V cellular structures

V. Popov, A. Koptyug, S. Stepanov, 2021, International Journal of Lightweight Materials and Manufacture.

Experimental Investigation of Convective Heat Transfer Between Silicon-Melt and Solidification Front

V. Popov, H. Rosenson, A. Kovalevsky, 2019, Silicon.

Punching Strength of Biaxial Voided Slabs

V. Popov, J. Valivonis, Arnoldas Šneideris, 2017 .

Closest and long-term prospects of 3D-printing for obstetrics and gynecology

E. V. Kudryavtseva, V. Popov, G. Muller-Kamskii, 2021, Ural Medical Journal.

Texturing and Phase Evolution in Ti-6Al-4V: Effect of Electron Beam Melting Process, Powder Re-Using, and HIP Treatment

V. Popov, G. Muller-Kamskii, A. Katz-Demyanetz, 2021, Materials.

Benefits of Additive Manufacturing for Industrial Design Development. Trends, Limitations and Applications

Gary Muller, Vladimir V. Popov, Anastasia Kolomiets, 2018 .

Effect of the hatching strategies on mechanical properties and microstructure of SEBM manufactured Ti-6Al-4V specimens

V. Popov, A. Katz-Demyanetz, A. Garkun, 2018 .

INNOVATIVE APPROACHES TO DESIGNING HIGHLY EFFICIENT ROCK-BREAKING TOOL

K. A. Borisov, V. V. Popov, A.Ya. Tretyak, 2017 .