C. Yan

发表

Advanced lattice support structures for metal additive manufacturing

R. Everson, Ahmed Hussein, L. Hao, 2013 .

Evaluations of cellular lattice structures manufactured using selective laser melting

Ahmed Hussein, L. Hao, C. Yan, 2012 .

Design and additive manufacturing of cellular lattice structures

Ahmed Hussein, L. Hao, C. Yan, 2011 .

Effect of laser energy density on the evolution of Ni4Ti3 precipitate and property of NiTi shape memory alloys prepared by selective laser melting

L. Duan, C. Yan, J. Gan, 2021, Journal of Alloys and Compounds.

Research on preparation and forming technology of selective laser sintering inorganic nonmetallic materials

C. Yan, S. Wen, Yusheng Shi, 2021 .

Microstructures and mechanical properties of nano-WC reinforced Ti-44.5Al-5Nb-0.5W-0.5C-0.2B alloy prepared by hot isostatic pressing

C. Yan, Yusheng Shi, Q. Wei, 2019, Journal of Alloys and Compounds.

Microstructure control and compressive properties of selective laser melted Ti-43.5Al-6.5Nb-2Cr-0.5B alloy: Influence of reduced graphene oxide (RGO) reinforcement

C. Yan, Yusheng Shi, S. Wen, 2019, Materials Science and Engineering: A.

Enhanced compressive strength and tailored microstructure of selective laser melted Ti-46.5Al-2.5Cr-2Nb-0.5Y alloy with different boron addition

C. Yan, Yusheng Shi, Q. Wei, 2018, Materials Science and Engineering: A.

Texture evolution, phase transformation mechanism and nanohardness of selective laser melted Ti-45Al-2Cr-5Nb alloy during multi-step heat treatment process

C. Yan, Yusheng Shi, Yan Zhou, 2017 .

Enhanced nanohardness and new insights into texture evolution and phase transformation of TiAl/TiB2 in-situ metal matrix composites prepared via selective laser melting

C. Yan, Yusheng Shi, Yan Zhou, 2017 .

Effect of heat treatment on CuCrZr alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism

Yan Zhou, Wei Li, Shuai Li, 2016, Journal of Materials Research and Technology.

Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering

Liang Hao, Wei Zhu, Philippe Young, 2015 .

Selective laser melting 316L/CuSn10 multi-materials: Processing optimization, interfacial characterization and mechanical property

C. Yan, Yusheng Shi, Yan Zhou, 2020 .

A novel hybrid selective laser melting/hot isostatic pressing of near-net shaped Ti-6Al-4V alloy using an in-situ tooling: Interfacial microstructure evolution and enhanced mechanical properties

C. Yan, Yusheng Shi, Q. Wei, 2018 .

Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting.

Liang Hao, Philippe Young, Ahmed Hussein, 2015, Journal of the mechanical behavior of biomedical materials.

Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting

Liang Hao, Philippe Young, David Raymont, 2014 .

Evaluation of light-weight AlSi10Mg periodic cellular lattice structures fabricated via direct metal laser sintering

Liang Hao, Philippe Young, David Raymont, 2014 .

Four-dimensional printing of a novel acrylate-based shape memory polymer using digital light processing

C. Yan, Yusheng Shi, Chao Cai, 2019, Materials & Design.

Continuous graded Gyroid cellular structures fabricated by selective laser melting: Design, manufacturing and mechanical properties

C. Yan, Yusheng Shi, Shoufeng Yang, 2019, Materials & Design.

Mechanical response of a triply periodic minimal surface cellular structures manufactured by selective laser melting

C. Yan, Yusheng Shi, Shoufeng Yang, 2018, International Journal of Mechanical Sciences.

Preliminary investigation on cellular support structures using SLM process

Richard M. Everson, Liang Hao, Ahmed Hussein, 2011 .

Liquid bridge induced assembly (LBIA) strategy: Controllable one-dimensional patterning from small molecules to macromolecules and nanomaterials

Yusheng Shi, Bin Su, Lei Jiang, 2019, Nano Today.

Effects of the unit cell topology on the compression properties of porous Co-Cr scaffolds fabricated via selective laser melting

Shuai Li, Yusheng Shi, Shifeng Wen, 2017 .

Investigation into mechanical and microstructural properties of polypropylene manufactured by selective laser sintering in comparison with injection molding counterparts

C. Yan, Yusheng Shi, S. Wen, 2015 .

Large-Scale Equipment and Higher Performance Materials for Laser Additive Manufacturing

C. Yan, S. Wen, Yusheng Shi, 2014 .

Investigation and development of large-scale equipment and high performance materials for powder bed laser fusion additive manufacturing

C. Yan, Yusheng Shi, S. Wen, 2014 .

Multiphase Polymeric Materials for Rapid Prototyping and Tooling Technologies and Their Applications

Yusheng Shi, Chunze Yan, C. Yan, 2010 .

Equipment and control system

C. Yan, S. Wen, Yusheng Shi, 2021 .

Selective laser sintering of polyamide 12/potassium titanium whisker composites

C. Yan, Yusheng Shi, Jinsong Yang, 2010 .

Selective laser sintering of HIPS and investment casting technology

Yusheng Shi, Chunze Yan, C. Yan, 2009 .

Glass Fiber-Reinforced Phenol Formaldehyde Resin-Based Electrical Insulating Composites Fabricated by Selective Laser Sintering

C. Yan, Yusheng Shi, Zhaoqing Li, 2019, Polymers.

Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology

X. Shao, P. Jiang, C. Yan, 2018, Journal of the European Ceramic Society.

Investigation into the crystalline structure and sub-Tpm exotherm of selective laser sintered Polyamide 6

C. Yan, S. Wen, Yusheng Shi, 2018 .

Systematical mechanism of Polyamide-12 aging and its micro-structural evolution during laser sintering

C. Yan, Yusheng Shi, S. Wen, 2018 .

Material optimization and post-processing of sand moulds manufactured by the selective laser sintering of binder-coated Al2O3 sands

Wei Zhu, Yusheng Shi, Shifeng Wen, 2015 .

Research Status and Prospect of Additive Manufactured Nickel-Titanium Shape Memory Alloys

C. Yan, Fei Li, Yan Zhou, 2021, Materials.

3D-Printed Superhydrophobic and Magnetic Device That Can Self-Powered Sense A Tiny Droplet Impact

C. Yan, Yusheng Shi, B. Song, 2022, Engineering.

Large Curvature Folding Strategies of Butterfly Proboscis

Y. Liu, C. Yan, Yan Zhou, 2020, Journal of Bionic Engineering.

4D Printing Strain Self‐Sensing and Temperature Self‐Sensing Integrated Sensor–Actuator with Bioinspired Gradient Gaps

Yan Zhou, Zhiwu Han, Yusheng Shi, 2020, Advanced science.

Sensor‐Actuators: 4D Printing Strain Self‐Sensing and Temperature Self‐Sensing Integrated Sensor–Actuator with Bioinspired Gradient Gaps (Adv. Sci. 13/2020)

Yan Zhou, Zhiwu Han, Zhengyi Song, 2020 .

Three-dimensional biofabrication of an aragonite-enriched self-hardening bone graft substitute and assessment of its osteogenicity in vitro and in vivo

C. Yan, Z. Shao, Z. Xia, 2020, Biomaterials translational.

Enhanced Photocatalysis of Black TiO2/Graphene Composites Synthesized by a Facile Sol–Gel Method Combined with Hydrogenation Process

C. Yan, X. Yang, Yusheng Shi, 2022, Materials.

Recent Advances in Stimuli‐Responsive Shape‐Morphing Hydrogels

C. Yan, Wenzheng Zhai, Yusheng Shi, 2022, Advanced Functional Materials.

3D printed porous biomass–derived SiCnw/SiC composite for structure–function integrated electromagnetic absorption

Haibo Zhang, Pengyuan Fan, C. Yan, 2022, Virtual and Physical Prototyping.

Preparation of polyamide 6 and its titanium dioxide photocatalytic composite powders for laser powder bed fusion

C. Yan, Yusheng Shi, Zhaoqing Li, 2022, Materials Science in Additive Manufacturing.

Microstructures, Thermal and Mechanical Properties of Pure Tungsten—A Comparison Between Selective Laser Melting and Hot Rolling

C. Yan, S. Wen, Chong Wang, 2022, Chinese Journal of Mechanical Engineering.

Selective laser sintering forming accuracy control

C. Yan, S. Wen, Yusheng Shi, 2021 .

Compression–compression fatigue behaviour of gyroid-type triply periodic minimal surface porous structures fabricated by selective laser melting

C. Yan, Shoufeng Yang, S. Wen, 2019 .

Topologically optimized lattice structures with superior fatigue performance

C. Yan, Yuxiang Chen, Yusheng Shi, 2022, International Journal of Fatigue.

Comparative evaluation of printability and compression properties of poly-ether-ether-ketone triply periodic minimal surface scaffolds fabricated by laser powder bed fusion

C. Yan, Yusheng Shi, Lei Yang, 2022, Additive Manufacturing.

Si/SiC ceramic lattices with a triply periodic minimal surface structure prepared by laser powder bed fusion

C. Yan, Yusheng Shi, Lei Yang, 2022, Additive Manufacturing.

3D Printing and Chemical Dealloying of a Hierarchically Micro- and Nanoporous Catalyst for Wastewater Purification.

C. Yan, Chen-Nan Sun, H. Qi, 2021, ACS applied materials & interfaces.

Crystallization kinetics of polyetheretherketone during high temperature-selective laser sintering

C. Yan, Yan Zhou, S. Wen, 2020 .

Microstructural and surface modifications and hydroxyapatite coating of Ti-6Al-4V triply periodic minimal surface lattices fabricated by selective laser melting.

Ahmed Hussein, L. Hao, C. Yan, 2017, Materials science & engineering. C, Materials for biological applications.

Additive manufactured self-powered mechanoelectric sensor as the artificial nucleus pulposus for monitoring tissue rehabilitation after discectomy

C. Yan, X. Yang, Lei Yang, 2022, Nano Energy.

A 2D correlation infrared spectroscopic study on the temperature-induced molecular motion mechanism concerning self-formed composite structure of 3D printed PA6

C. Yan, Yusheng Shi, S. Wen, 2019, Polymer.

In-situ deposition of three-dimensional graphene on selective laser melted copper scaffolds for high performance applications

K. Essa, L. Hao, C. Yan, 2020 .

Effect of Ni content on the transformation behavior and mechanical property of NiTi shape memory alloys fabricated by laser powder bed fusion

C. Yan, Yusheng Shi, Yan Zhou, 2021 .

Low intensity near-infrared light promotes bone regeneration via circadian clock protein cryptochrome 1

C. Yan, Yunyun Han, Guangjin Chen, 2022, International Journal of Oral Science.

Laser powder bed fusion of poly-ether-ether-ketone/bioactive glass composites: Processability, mechanical properties, and bioactivity

C. Yan, Yusheng Shi, Lei Yang, 2022, Composites Science and Technology.

Preparation and selective laser sintering of a new nylon elastomer powder

C. Yan, Weidou Zhu, Z. Xia, 2018, Rapid Prototyping Journal.

A macroscale FEM-based approach for selective laser sintering of thermoplastics

C. Yan, L. Fratini, G. Buffa, 2017, The International Journal of Advanced Manufacturing Technology.

Alumina-based ceramic mold with integral core and shell for hollow turbine blades fabricated by Laser powder bed fusion

C. Yan, S. Wen, Yusheng Shi, 2022, Additive Manufacturing.

Effect of element evaporation on the microstructure and properties of CuZnAl shape memory alloys prepared by selective laser melting

C. Yan, Yusheng Shi, Q. Wei, 2020 .

Large‐Scale, Abrasion‐Resistant, and Solvent‐Free Superhydrophobic Objects Fabricated by a Selective Laser Sintering 3D Printing Strategy

C. Yan, Yan Zhou, S. Wen, 2023, Advanced science.

Enhanced mechanical property with refined microstructure of a novel γ-TiAl/TiB2 metal matrix composite (MMC) processed via hot isostatic press

C. Yan, Yusheng Shi, Q. Wei, 2018 .

Insights into unit cell size effect on mechanical responses and energy absorption capability of titanium graded porous structures manufactured by laser powder bed fusion.

L. Hao, C. Yan, Yusheng Shi, 2020, Journal of the mechanical behavior of biomedical materials.

In-situ TiB/Ti-6Al-4V composites with a tailored architecture produced by hot isostatic pressing: Microstructure evolution, enhanced tensile properties and strengthening mechanisms

C. Yan, Yusheng Shi, Q. Wei, 2019, Composites Part B: Engineering.

A novel near α-Ti alloy prepared by hot isostatic pressing: Microstructure evolution mechanism and high temperature tensile properties

C. Yan, Yusheng Shi, Q. Wei, 2016 .

Simultaneous strength and ductility enhancements of high thermal conductive Ag7.5Cu alloy by selective laser melting

C. Yan, T. Peijs, Yan Li, 2022, Scientific Reports.

Effect of laser scanning speed on a Ti-45Al-2Cr-5Nb alloy processed by selective laser melting: Microstructure, phase and mechanical properties

C. Yan, Yusheng Shi, Yan Zhou, 2016 .

Three-dimensional printing of gyroid-structured composite bioceramic scaffolds with tuneable degradability.

C. Yan, Yusheng Shi, Lei Yang, 2021, Materials science & engineering. C, Materials for biological applications.

Additive manufacturing of hydroxyapatite and its composite materials: A review

W. Wang, C. Yan, Shoufeng Yang, 2020 .

Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting

Richard M. Everson, Liang Hao, Ahmed Hussein, 2013 .

Artificial bone scaffolds of coral imitation prepared by selective laser sintering.

C. Yan, Weidou Zhu, Z. Xia, 2020, Journal of the mechanical behavior of biomedical materials.

Preparation of high-performance silica-based ceramic cores with B4C addition using selective laser sintering and SiO2–Al2O3 sol infiltration

C. Yan, J. Zhang, S. Wen, 2022, Ceramics International.

Effect of volume fraction and unit cell size on manufacturability and compressive behaviors of Ni-Ti triply periodic minimal surface lattices

C. Yan, X. Yang, Yusheng Shi, 2022, Additive Manufacturing.

Continuous functionally graded porous titanium scaffolds manufactured by selective laser melting for bone implants.

L. Hao, C. Yan, Yusheng Shi, 2018, Journal of the mechanical behavior of biomedical materials.

Alloy/graphene 3D TPMS porous scaffold

L. Hao, C. Yan, Zhaoqing Li, 2021, Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting.

Effect of silicon addition on the microstructure, mechanical and thermal properties of Cf/SiC composite prepared via selective laser sintering

K. Zhou, C. Yan, Yusheng Shi, 2019, Journal of Alloys and Compounds.

Recent Advances on High‐Performance Polyaryletherketone Materials for Additive Manufacturing

C. Yan, S. Wen, Yusheng Shi, 2022, Advanced materials.

Preparation, characterisation and processing of carbon fibre/polyamide-12 composites for selective laser sintering

Liang Hao, Yusheng Shi, Lin Xu, 2011 .

A NOVEL METHOD FOR FABRICATING CARBON FIBRE REINFORCED SILICON CARBIDE COMPOSITES VIA 3D PRINTING TECHNOLOGY

X. Shao, C. Yan, Yusheng Shi, 2017 .

Effect of substrate preheating on the texture, phase and nanohardness of a Ti–45Al–2Cr–5Nb alloy processed by selective laser melting

C. Yan, Yusheng Shi, Yan Zhou, 2016 .

Crystal orientation, crystallographic texture and phase evolution in the Ti–45Al–2Cr–5Nb alloy processed by selective laser melting

C. Yan, Yusheng Shi, S. Wen, 2016 .

Ultra-toughened nylon 12 nanocomposites reinforced with IF-WS2

C. Yan, Yongde Xia, Yanqiu Zhu, 2014, Nanotechnology.

Tailorable and predictable mechanical responses of additive manufactured TPMS lattices with graded structures

Yang Li, C. Yan, Yusheng Shi, 2022, Materials Science and Engineering: A.

An investigation into the effect of gradients on the manufacturing fidelity of triply periodic minimal surface structures with graded density fabricated by selective laser melting

C. Yan, W. Dewulf, Yusheng Shi, 2020 .

Effect of selective laser melting parameters on morphology, microstructure, densification and mechanical properties of supersaturated silver alloy

L. Hao, C. Yan, W. Xiong, 2019, Materials & Design.

Numerical analysis on the mechanical properties of uniform TPMS

C. Yan, Zhaoqing Li, Yan Li, 2021, Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting.

Investigation on the orientation dependence of elastic response in Gyroid cellular structures.

C. Yan, Yusheng Shi, Shoufeng Yang, 2019, Journal of the mechanical behavior of biomedical materials.

Investigation into the processability, recyclability and crystalline structure of selective laser sintered Polyamide 6 in comparison with Polyamide 12

C. Yan, Yusheng Shi, S. Wen, 2018 .

3D‐Printed Underwater Super‐Oleophobic Shark Skin toward the Electricity Generation through Low‐Adhesion Sliding of Magnetic Nanofluid Droplets

C. Yan, Yusheng Shi, Bin Su, 2021, Advanced Functional Materials.

A Superconducting‐Material‐Based Maglev Generator Used for Outer‐Space

M. Dickey, Deliang L. Chen, C. Yan, 2022, Advanced materials.

An organically modified montmorillonite/nylon‐12 composite powder for selective laser sintering

C. Yan, Shi Yun-song, Jie Liu, 2011 .

Polymer materials for additive manufacturing: liquid materials

C. Yan, Yan Zhou, Yusheng Shi, 2021, Materials for Additive Manufacturing.

Polymer materials for additive manufacturing—powder materials

C. Yan, Yan Zhou, Yusheng Shi, 2021 .

A novel method based on selective laser sintering for preparing high-performance carbon fibres/polyamide12/epoxy ternary composites

C. Yan, S. Wen, Yusheng Shi, 2016, Scientific Reports.

3D‐Printed Anisotropic Polymer Materials for Functional Applications

C. Yan, Yusheng Shi, Weidou Zhu, 2021, Advanced materials.

Effect of molten pool boundaries on the mechanical properties of selective laser melting parts

Wei Qingsong, Shi Yusheng, Wen Shifeng, 2014 .

Mechanical responses of sheet-based gyroid-type triply periodic minimal surface lattice structures fabricated using selective laser melting

C. Yan, Yusheng Shi, Lei Yang, 2022, Materials & Design.

Fatigue properties of Ti-6Al-4V Gyroid graded lattice structures fabricated by laser powder bed fusion with lateral loading

C. Yan, Yan Zhou, S. Wen, 2021 .

Effect of the slurry composition on the piezoelectric properties of PZT ceramics fabricated via materials extrusion 3D printing

Huajun Sun, C. Yan, Yusheng Shi, 2023, Ceramics International.

Mechanical properties and energy absorption of AlSi10Mg Gyroid lattice structures fabricated by selective laser melting

C. Yan, X. Yang, Yusheng Shi, 2022, Smart Manufacturing.

Aging mechanism of polyetheretherketone powder during layer-wise infrared radiation of high-temperature laser powder bed fusion

C. Yan, Yan Zhou, S. Wen, 2022, Materials & Design.

A Material Combination Concept to Realize 4D Printed Products with Newly Emerging Property/Functionality

Hongzhi Wu, Ce Zhang, Peng Chen, 2020, Advanced science.

TiAl/RGO (reduced graphene oxide) bulk composites with refined microstructure and enhanced nanohardness fabricated by selective laser melting (SLM)

C. Yan, Yusheng Shi, Q. Wei, 2018, Materials Characterization.

Multi‐Material Additively Manufactured Magnetoelectric Architectures with a Structure‐Dependent Mechanical‐to‐Electrical Conversion Capability

C. Yan, Yusheng Shi, Lei Yang, 2022, Small methods.

3d-Printed Magnetic Porous Structures with Different Poisson’s Ratios and Their Mechanoelectrical Conversion Capabilities

C. Yan, Yusheng Shi, Bin Su, 2023, Additive Manufacturing.

Selective Laser Sintering-Based 4D Printing of Magnetism-Responsive Grippers.

C. Yan, Yusheng Shi, Kun Zhou, 2020, ACS applied materials & interfaces.

Materials for four-dimensional printing

C. Yan, Yan Zhou, Yusheng Shi, 2021 .

Mechanical properties and microstructure characteristics of lattice-surfaced PEEK cage fabricated by high-temperature laser powder bed fusion

C. Yan, Yan Zhou, S. Wen, 2022, Journal of Materials Science & Technology.

Functionally graded TPMS

C. Yan, Zhaoqing Li, Yan Li, 2021, Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting.

Numerical analysis of selective laser sintering key technology

C. Yan, S. Wen, Yusheng Shi, 2021 .

Introduction and basic principles

C. Yan, S. Wen, Yusheng Shi, 2021, Selective Laser Melting for Metal and Metal Matrix Composites.

A 4D printing strategy and integrated design for programmable electroactive shape-color double-responsive bionic functions

C. Yan, S. Wen, Yusheng Shi, 2021 .

ORE Open Research Exeter

Ahmed Hussein, L. Hao, C. Yan, 2022 .

Fatigue properties of uniform TPMS structures

C. Yan, Zhaoqing Li, Yan Li, 2021, Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting.

Compression-Compression Fatigue Behaviour of Triply Periodic Minimal Surface Porous Structures Fabricated by Selective Laser Melting

C. Yan, Shoufeng Yang, S. Wen, 2019, SSRN Electronic Journal.

Effect of Nb content on microstructure, property and in vitro apatite-forming capability of Ti-Nb alloys fabricated via selective laser melting

C. Yan, Yusheng Shi, Q. Wei, 2017 .

Research on preparation and forming technologies of selective laser sintering polymer materials

C. Yan, S. Wen, Yusheng Shi, 2021 .

Study on the selective laser sintering of a low-isotacticity polypropylene powder

C. Yan, Yusheng Shi, S. Wen, 2016 .

Preparation and Selective Laser Sintering of Nylon-12-Coated Aluminum Powders:

C. Yan, Yusheng Shi, Jingsong Yang, 2009 .

A macroscale FEM-based approach for selective laser sintering of thermoplastics

Song Bo, Livan Fratini, Gianluca Buffa, 2017 .

Metal alloys uniform TPMS structures

C. Yan, Zhaoqing Li, Yan Li, 2021, Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting.

Development of Fe-Mn-Si-Cr-Ni shape memory alloy with ultrahigh mechanical properties and large recovery strain by laser powder bed fusion

C. Yan, X. Yang, Yusheng Shi, 2023, Journal of Materials Science & Technology.

Introduction

C. Yan, Zhaoqing Li, Yan Li, 2021, Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting.

Microstructure evolution and mechanical property modulation of 3D printed high-performance Al2O3 foams using Al particles as reaction bonding agents

C. Yan, Yusheng Shi, Shuning Liu, 2023, Advanced Powder Materials.

Effects of particle size distribution and sintering temperature on properties of alumina mold material prepared by stereolithography

C. Yan, Jia‐Min Wu, Shuang Chen, 2021, Ceramics International.

Fabrication of Porous SiC by Direct Selective Laser Sintering Effect of Boron Carbide

C. Yan, Yusheng Shi, Yu-Di Qiu, 2021, Metals.

Software algorithm and route planning

Zhaoqing Li, Yusheng Shi, Shifeng Wen, 2021 .

Investigation into the selective laser sintering of styrene–acrylonitrile copolymer and postprocessing

Yusheng Shi, Chunze Yan, C. Yan, 2010 .

Overview of additive manufacturing technology and materials

C. Yan, Yan Zhou, Yusheng Shi, 2021 .

Fatigue Properties of Ti-6al-4v Gyroid Graded Lattice Structures in Comparison with Uniform Counterparts Fabricated by Selective Laser Melting

C. Yan, Yan Zhou, S. Wen, 2021 .

Superhydrophobic/Superhydrophilic Janus Evaporator for Extreme High Salt-Resistance Solar Desalination by an Integrated 3D Printing Method.

C. Yan, Yusheng Shi, Zhenhua Wu, 2023, ACS applied materials & interfaces.

3D/4D printed bio-piezoelectric smart scaffolds for next-generation bone tissue engineering

C. Yan, Yusheng Shi, Jin Su, 2023, International Journal of Extreme Manufacturing.

Multimaterial additive manufacturing manipulator for fabricating magnetoelectric pressure sensors

C. Yan, Yusheng Shi, Zhaoqing Li, 2022, Science China Technological Sciences.

Structure design of arc-shaped auxetic metamaterials with tunable Poisson’s ratio

C. Yan, Lei Yang, Hongzhi Wu, 2022, Mechanics of Advanced Materials and Structures.

Ceramic materials for additive manufacturing

C. Yan, Yan Zhou, Yusheng Shi, 2021 .

Preparation and selective laser sintering of nylon-12 coated copper powders

C. Yan, Zhaoqing Li, Peng Chen, 2021, Rapid Prototyping Journal.

Preparation and selective laser sintering of nylon-12 coated metal powders and post processing

C. Yan, Yusheng Shi, Jingsong Yang, 2009 .

Evaluation of mechanical and biological properties of akermanite/poly-ether-ether- ketone composite fabricated by high- temperature laser powder bed fusion

C. Yan, Yusheng Shi, Zhaoqing Li, 2023, International journal of bioprinting.

Recent Advances on High‐Performance Polyaryletherketone Materials for Additive Manufacturing (Adv. Mater. 52/2022)

C. Yan, S. Wen, Yusheng Shi, 2022, Advanced Materials.

Topology-optimized lattice structures with simultaneously high stiffness and light weight fabricated by selective laser melting: Design, manufacturing and characterization

C. Yan, B. Song, L. Gao, 2020 .

Moisture‐Thermal Stable, Superhydrophilic Alumina‐Based Ceramics Fabricated by a Selective Laser Sintering 3D Printing Strategy for Solar Steam Generation

C. Yan, Yusheng Shi, Shuang Chen, 2023, Advanced Functional Materials.

Application and prospects

C. Yan, Zhaoqing Li, Yan Li, 2021, Triply Periodic Minimal Surface Lattices Additively Manufactured by Selective Laser Melting.

Subdivisional Modelling Method for Matched Metal Additive Manufacturing and its Implementation on Novel Negative Poisson's Ratio Lattice Structures

C. Yan, Yan Li, Ruiqi Pan, 2023, Additive Manufacturing.

Additive manufacturing and foundry innovation

C. Yan, S. Wen, Jin-liang Zhang, 2021, China Foundry.

Effect of Particle Grading on the Properties of Photosensitive Slurry and BaTiO3 Piezoelectric Ceramic via Digital Light Processing 3D Printing

Huajun Sun, C. Yan, Yusheng Shi, 2023, Journal of the European Ceramic Society.

The effect of processing parameters on characteristics of selective laser sintering dental glass‐ceramic powder

Yusheng Shi, Chunze Yan, C. Yan, 2010 .

Designing 3D graphene networks via a 3D-printed Ni template

C. Yan, Zhuxian Yang, Sakineh Chabi, 2015 .

Four-dimensional Printing —— the Additive Manufacturing Technology of Intelligent Components

Zhang Ce, Liang Bo, Shi Yusheng, 2020, Journal of Mechanical Engineering.

Ni–Ti multicell interlacing Gyroid lattice structures with ultra-high hyperelastic response fabricated by laser powder bed fusion

C. Yan, Cong Zhang, Yang Li, 2023, International Journal of Machine Tools and Manufacture.

Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting.

Ahmed Hussein, L. Hao, C. Yan, 2015, Journal of the mechanical behavior of biomedical materials.

Vibration characteristics of additive manufactured IWP-type TPMS lattice structures

C. Yan, Cong Zhang, Hui Qiao, 2023, Composite Structures.

Multi-Material 3D and 4D Bioprinting of Heterogeneous Constructs for Tissue Engineering.

C. Yan, Guo Liu, Jian Lu, 2023, Advances in Materials.

3D in situ heterogeneous SiC/mullite hollow constructs for broadband electromagnetic absorption

C. Yan, Annan Chen, Changshun Wang, 2024, Cell Reports Physical Science.

3D Printing of Hydrogel/BaTiO3 Composite Scaffolds with Highly Improved Mechanical, Electrical, and Degradable Properties

C. Yan, Jin Su, Annan Chen, 2023, Journal of Composites and Biodegradable Polymers.

A Nanosilica/Nylon-12 Composite Powder for Selective Laser Sintering

Shi Yusheng, Liu Jin-hui, Yang Jin-song, 2009 .

Metal materials for additive manufacturing

C. Yan, Yan Zhou, Yusheng Shi, 2021 .

Thermal debinding for stereolithography additive manufacturing of advanced ceramic parts: A comprehensive review

C. Yan, Changshun Wang, Yusheng Shi, 2024, Materials & Design.

Electric Power Generated from Magnetic Nanofluid Droplets Sliding upon Superslippery Surfaces.

C. Yan, Kun Zhou, Zheng Ma, 2023, ACS applied materials & interfaces.

Near Net Shape Forming Process of a Titanium Alloy Component Using Hot Isostatic Pressing with Graphite Mould

C. Yan, Yusheng Shi, Q. Wei, 2014 .