S. Sen

发表

Thermal Radiation Modeling In Flames And Fires

S. Sen, I. Puri, 2008 .

Analyzing ferrofluid transport for magnetic drug targeting

Swarnendu Sen, Ishwar K. Puri, Ranjan Ganguly, 2005 .

Field measurements of soot volume fractions in laminar partially premixed coflow ethylene/air flames

S. Sen, I. Puri, C. Arana, 2004 .

Dynamic Characterization of a Ducted Inverse Diffusion Flame Using Recurrence Analysis

S. Sen, Tryambak Gangopadhyay, A. Mukhopadhyay, 2018 .

Application of recurrence quantification analysis for early detection of lean blowout in a swirl-stabilized dump combustor.

S. Sen, A. Mukhopadhyay, S. De, 2020, Chaos.

Early Prediction of Lean Blowout from Chemiluminescence Time Series Data

A. Ray, S. Sen, A. Mukhopadhyay, 2020, Combustion Science and Technology.

Dynamic Characterization of a Laboratory-Scale Pulse Combustor

S. Sen, A. Mukhopadhyay, S. Mondal, 2014 .

Instability analysis of a plane liquid sheet sandwiched between two gas streams of nonzero unequal velocities.

S. Sen, A. Datta, A. Mukhopadhyay, 2009 .

Dynamic Mode Decomposition

Uri Shaham, S. Sen, A. Mukhopadhyay, 2013 .

CHAPTER 8 Thermal radiation modeling in fl ames and fi res

S. Sen, I. Puri, 2008 .

Experimental Investigation of Spray Formation in a Hybrid Atomizer

S. Sen, A. Mukhopadhyay, Souvick Chatterjee, 2014 .

Identification and early prediction of lean blowout in premixed flames

S. Sen, A. Mukhopadhyay, S. De, 2020 .

Use of Flame Color and Chemiluminescence for Early Detection of Lean Blowout in Gas Turbine Combustors at Different Levels of Fuel–Air Premixing

S. Sen, A. Mukhopadhyay, S. De, 2020, Combustion Science and Technology.

Dynamics of Non-reacting and Reacting Flows Past Bluff Bodies

S. Sen, A. Mukhopadhyay, S. Sarkar, 2019, Innovations in Sustainable Energy and Cleaner Environment.

Effects of fluid injection on dynamics of flow past a circular cylinder

S. Sen, A. Mukhopadhyay, Uddalok Sen, 2017 .

Investigation of flame behavior and dynamics prior to lean blowout in a combustor with varying mixedness of reactants for the early detection of lean blowout

S. Sen, A. Mukhopadhyay, S. De, 2018, International Journal of Spray and Combustion Dynamics.

Lean Blowout Detection Techniques for Partially Premixed Flames in a Dump Combustor

Rajendra R. Chaudhari, S. Sen, A. Mukhopadhyay, 2014 .

Natural convection in a bi-heater configuration of passive electronic cooling

S. Sen, R. Ganguly, A. Mukhopadhyay, 2008 .

Fully Developed Hydrodynamic and Thermal Transport of Combined Pressure and Electrokinetically-driven Flow in a Microchannel With Three Immiscible Fluids

S. Sen, A. Mukhopadhyay, S. Pramanik, 2011 .

Coolability of Heat-Generating Porous Debris Beds in Severe Accident Situations

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2018, Energy, Environment, and Sustainability.

Modelling of Soot Formation in a Kerosene Spray Flame

S. Sen, R. Ganguly, A. Datta, 2018 .

Interaction of surface radiation and variable property natural convection in a differentially heated square cavity – a finite element analysis

S. Sen, S. Mahapatra, A. Sarkar, 1999 .

Effect of confinement on breakup of planar liquid sheets sandwiched between two gas streams and resulting spray characteristics

Sudeep Sarkar, S. Sen, A. Datta, 2014 .

Laminar Premixed Flames

S. Sen, A. Mukhopadhyay, 2019, Fundamentals of Combustion Engineering.

Dynamics of magnetic modulation of ferrofluid droplets for digital microfluidic applications

M. Tiwari, S. Sen, R. Ganguly, 2017 .

Modeling of steam–water direct contact condensation using volume of fluid approach

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2018 .

Direct Contact Condensation of Steam in Subcooled Water

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2018, Energy, Environment, and Sustainability.

Modeling and analysis of condensation induced water hammer

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2018, Numerical Heat Transfer, Part A: Applications.

The effects of steam and water spray on NO formation in a methane–air counterflow diffusion flame

S. Sen, A. Mukhopadhyay, S. Sarkar, 2021 .

Molten Drop to Coolant Heat Transfer During Premixing of Fuel Coolant Interaction

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2018 .

Heat transfer augmentation using a magnetic fluid under the influence of a line dipole

S. Sen, I. Puri, R. Ganguly, 2004 .

Thermomagnetic Convection in Square and Shallow Enclosures for Electronics Cooling

S. Sen, R. Ganguly, A. Mukhopadhyay, 2009 .

Dynamic characterization of a single phase square natural circulation loop

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2018 .

Dynamic Characterization of Candle Flame

S. Sen, T. Mondal, A. Mukhopadhyay, 2010 .

Leveraging Wettability Engineering to Develop Three-Layer DIY Face Masks From Low-Cost Materials

S. Sen, R. Ganguly, C. Megaridis, 2020, Transactions of the Indian National Academy of Engineering.

Numerical Simulation of Laminar Confined Radial Flow Between Parallel Circular Discs

S. Sen, A. Mukhopadhyay, N. Manna, 2012 .

Numerical Analysis of Heat Transfer Characteristics Under Single-Jet Air Impingement

S. Sen, A. Mukhopadhyay, S. Sarkar, 2020, Advances in Thermal Engineering, Manufacturing, and Production Management.

Thermal Non-equilibrium Heat Transfer and Entropy Generation due to Natural Convection in a Cylindrical Enclosure with a Truncated Conical, Heat-Generating Porous Bed

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2016, Transport in Porous Media.

Early detection of lean blowout using recurrence network for varying degrees of premixedness.

S. Sen, A. Mukhopadhyay, S. De, 2022, Chaos.

Combustion of Solid Fuels and Surface Reactions

S. Sen, A. Mukhopadhyay, 2019, Fundamentals of Combustion Engineering.

A Cross-Wavelet Transform Aided Rule Based Approach for Early Prediction of Lean Blow-out in Swirl-Stabilized Dump Combustor

Rajendra R. Chaudhari, S. Chakravorti, S. Sen, 2015 .

A Deep Learning Approach to Detect Lean Blowout in Combustion Systems

S. Sarkar, S. Sen, Tryambak Gangopadhyay, 2022, ArXiv.

Effect of functionalisation of CNT in the preparation of HAp–CNT biocomposites

S. Sen, A. Chanda, S. Mukherjee, 2015 .

Experimental investigation of the effect of jet inclination on bifurcation of laminar jets

S. Sen, A. Mukhopadhyay, R. Sahu, 2014 .

Numerical simulation of early stages of oxide formation in molten aluminium-magnesium alloys in a reverberatory furnace

S. Sen, I. Puri, A. Mukhopadhyay, 2004 .

Thermodynamics of Reacting Systems

S. Sen, A. Mukhopadhyay, 2019, Fundamentals of Combustion Engineering.

Improved properties of hydroxyapatite–carbon nanotube biocomposite: Mechanical, in vitro bioactivity and biological studies

S. Sen, A. Chanda, S. Mukherjee, 2014 .

Flame synthesis of superhydrophobic amorphous carbon surfaces

S. Sen, I. Puri, S. Naha, 2007 .

Catalyst influence on the flame synthesis of aligned carbon nanotubes and nanofibers

S. Sen, I. Puri, C. Arana, 2005 .

Laminar Non-Premixed Flames

S. Sen, A. Mukhopadhyay, 2019, Fundamentals of Combustion Engineering.

Finite element solution of steady natural convection equations by a false diffusion method

S. Sen, A. Sarkar, 1994 .

Mixed convective heat transfer in an enclosure containing a heat-generating porous bed under the influence of bottom injection

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2018 .

Studies of combustion characteristics of kerosene ethanol blends in an axi-symmetric combustor

S. Sen, R. Ganguly, M. Das, 2015 .

An Integral Approach for Predicting Vapour Film Collapse and Growth Around a Hot Sphere in Subcooled Water

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2006 .

Dynamic Systems Approach for Laminar Ducted Flames

Achintya Mukhopadhyay, Swarnendu Sen, Uddalok Sen, 2018 .

Study of heat transfer augmentation in a differentially heated square cavity using copper–water nanofluid

Niladri Chakraborty, Swarnendu Sen, S. Sen, 2008 .

Mechanical and In-vitro Performance of CNT Reinforced Hydroxyapatite Prepared by a Shear Mixing Method

S. Sen, A. Chanda, S. Mukherjee, 2013 .

Enhanced bone regeneration with carbon nanotube reinforced hydroxyapatite in animal model.

Susmita Mukherjee, Swarnendu Sen, Pradip Kumar Das, 2016, Journal of the mechanical behavior of biomedical materials.

Interaction of Lewis number and heat loss effects for a laminar premixed flame propagating in a channel

S. Sen, A. Mukhopadhyay, S. Chakraborty, 2008 .

Concentration distributions of intermediate hydrocarbons and soot in propane–air triple flames

S. Sen, A. Datta, A. Sarkar, 2009 .

A detailed model for the flame synthesis of carbon nanotubes and nanofibers

S. Sen, I. Puri, A. K. De, 2007 .

Flame synthesis of carbon nanofibres and nanofibre composites containing encapsulated metal particles

Swarnendu Sen, Ishwar K. Puri, S. Sen, 2004 .

Combustion Diagnostics

S. Sen, A. Mukhopadhyay, 2018, Fundamentals of Combustion Engineering.

Heat Transfer and Entropy Generation in a Porous Square Enclosure in Presence of an Adiabatic Block

S. Sen, Koushik Ghosh, N. Manna, 2015, Transport in Porous Media.

Investigation of Ducted Inverse Nonpremixed Flame Using Dynamic Systems Approach

S. Sen, Tryambak Gangopadhyay, A. Mukhopadhyay, 2016 .

Optimizing Thermomagnetic Convection for Electronics Cooling

S. Sen, R. Ganguly, A. Mukhopadhyay, 2008 .

Simulation of heat transfer and dissipation in targets used in nuclear astrophysics experiments

S. Sen, M. Das, A. K. Santra, 2019, Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms.

Shear viscosity enhancement in water–nanoparticle suspensions

S. Sen, I. Puri, G. Balasubramanian, 2012 .

Thermomagnetic convection in a square enclosure using a line dipole

S. Sen, I. Puri, R. Ganguly, 2004 .

A numerical analysis on the effect of inlet parameters for condensation induced water hammer

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2016 .

Experimental investigation on the effect of initial pressure conditions during steam-water direct contact condensation in a horizontal pipe geometry

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2021 .

The Effects of Magnetization Saturation on Thermomagnetic Convection in a Locally Heated Square Enclosure

S. Sen, R. Ganguly, A. Mukhopadhyay, 2011 .

Pool Boiling Amelioration by Aqueous Dispersion of Silica Nanoparticles

S. Sen, P. Chaudhuri, N. Ali, 2021, Nanomaterials.

Study of heat transfer due to laminar flow of copper–water nanofluid through two isothermally heated parallel plates

Niladri Chakraborty, Swarnendu Sen, S. Sen, 2009 .

Particle Diameter Effect on Heat Transfer Due to Natural Convection Using Cu-Water Nanofluid - A Non-Newtonian Approach

S. Sen, N. Chakraborty, A. K. Santra, 2010 .

Prediction of heat transfer due to presence of copper–water nanofluid using resilient-propagation neural network

Niladri Chakraborty, Swarnendu Sen, S. Sen, 2009 .

Numerical investigation of the effects of polydisperse water sprays on extinction conditions of counterflow methane non-premixed flames

S. Sen, A. Mukhopadhyay, S. Sarkar, 2019, Combustion Theory and Modelling.

Interaction of Water Spray with Flame

S. Sen, A. Mukhopadhyay, S. Sarkar, 2018 .

Effects of variable property and surface radiation on laminar natural convection in a square enclosure

S. Sen, A. Sarkar, 1995 .

A Comprehensive Model for Estimation of Spray Characteristics

S. Sen, A. Mukhopadhyay, Souvick Chatterjee, 2018 .

Experimental Investigation of Breakup of Annular Liquid Sheet in a Hybrid Atomizer

S. Sen, M. Das, A. Mukhopadhyay, 2015 .

CHARACTERIZATION OF STRAIGHT VEGETABLE OIL SPRAYS ISSUED FROM PRESSURE SWIRL AND TWIN FLUID ATOMIZERS

S. Sen, R. Ganguly, A. Datta, 2013 .

Thermodynamic analysis of a solid nuclear fuel element surrounded by flow of coolant through a concentric annular channel

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2015 .

Performance assessment of longitudinal flow through rod bundle arrangements using entropy generation minimization approach

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2015 .

Power law inflation and scalar field cosmology with a causal viscous fluid

S. Sen, N. Banerjee, 1998 .

Exact Scalar Field Cosmology with Causal Viscous Fluid

S. Sen, N. Banerjee, 1997 .

Detection and classification of lean blow-out and thermoacoustic instability in turbulent combustors

Asok Ray, Chandrachur Bhattacharya, Achintya Mukhopadhyay, 2020 .

Optimization of Support System for FAIR Energy Buncher Dipole Magnet

S. Sen, P. Mukherjee, G. Pal, 2016, IEEE transactions on applied superconductivity.

Experimental investigation of spray formation in a hybrid atomizer using diesel, ethanol and ethanol blended diesel

S. Sen, A. Mukhopadhyay, Souvick Chatterjee, 2019, Experimental Thermal and Fluid Science.

Experimental investigation of spray characteristics of kerosene and ethanol-blended kerosene using a gas turbine hybrid atomizer

S. Sen, A. Mukhopadhyay, Shinjan Ghosh, 2017, Sādhanā.

A scaling analysis to characterize thermomagnetic convection

S. Sen, I. Puri, R. Ganguly, 2005 .

Bifurcation analysis of steady states and limit cycles in a thermal pulse combustor model

S. Sen, A. Mukhopadhyay, S. Mondal, 2017 .

Synchronisation behaviour between two candle flame oscillators with similar and dissimilar amplitudes of oscillations

S. Sen, A. Mukhopadhyay, S. De, 2023, Combustion Theory and Modelling.

A Sphericosymmetric VOF Approach for Investigating Immiscible Two-Phase Systems with One Liquid Phase

Dipankar Sanyal, Swarnendu Sen, Koushik Ghosh, 2006 .

Early detection of lean blowout in a combustor using symbolic analysis of colour images

Achintya Mukhopadhyay, Somnath De, Arijit Bhattacharya, 2021, Measurement.

Characterization of Mixing and Flow Properties From Numerical Simulation of Cold Flow in Non-Premixed Combustor

Wolfgang Polifke, Sirshendu Mondal, Achintya Mukhopadhyay, 2014 .

Dynamic Behaviour, Identification and Control of Energy Systems

D. N. Basu, S. Sen, A. Mukhopadhyay, 2019, Energy, Environment, and Sustainability.

Impact of side injection on heat removal from truncated conical heat-generating porous bed: thermal non-equilibrium approach

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2020, Journal of Thermal Analysis and Calorimetry.

Thermophysical and transient heat transfer characteristics of aqueous SiO2 nanofluid in energy management applications

S. Sen, P. Chaudhuri, S. Panda, 2022, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Characterization of a ferrofluid-based thermomagnetic pump for microfluidic applications

Amitava Datta, Swarnendu Sen, Ranjan Ganguly, 2011 .

Effects of the Dipole Position on Thermomagnetic Convection in a Locally Heated Shallow Enclosure: Thermodynamic and Transport Analysis

S. Sen, R. Ganguly, A. Mukhopadhyay, 2010 .

An investigation on the solidification and porosity prediction in aluminium casting process

S. Sen, Samir Chakravarti, 2023, Journal of Engineering and Applied Science.

A Study On Solidification Of Large Iron Casting In A Thin Water Cooled Copper Mould

S. Sen, A. Bandyopadhyay, Samir Chakravarti, 2018 .

Simulation of Commencement and Size of the Hot Spot in Permanent Mould Casting

S. Sen, Samir Chakravarti, 2023, Key Engineering Materials.

Study on the Behaviour of Surface Wear and Friction for a Pure Aluminium Casting Product Using Permanent Mould

S. Sen, Samir Chakravarti, 2023, Key Engineering Materials.

Flame Color as a Lean Blowout Predictor

Rajendra R. Chaudhari, S. Sen, A. Mukhopadhyay, 2013 .

A thermal model to characterize the flattening effect of a nuclear fuel element in an annular channel using simple analytical approach

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2015 .

Characterization of Turbulent Combustion Systems Using Dynamical Systems Theory

S. Sen, A. Mukhopadhyay, S. Mondal, 2018 .

Polydisperse Spray Modeling Using Eulerian Method

S. Sen, A. Mukhopadhyay, S. Sarkar, 2020, Sustainable Development for Energy, Power, and Propulsion.

Effects of inlet conditions on dynamics of a thermal pulse combustor

Sirshendu Mondal, Swarnendu Sen, Achintya Mukhopadhyay, 2012 .

Early Detection of Thermal Runaway of Lithium-Ion Battery-An Experimental Study

S. Sen, A. Mukhopadhyay, S. Sarkar, 2023, 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET).

Leveraging Wettability Engineering to Develop Three-Layer DIY Face Masks From Low-Cost Materials

S. Sen, R. Ganguly, C. Megaridis, 2020, Transactions of Indian National Academy of Engineering.

Impact of liquid coolant subcooling on boiling heat transfer and dryout in heat-generating porous media

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2021, Thermal Science and Engineering Progress.

Pressure dependence of dryout in a heat-generating porous debris bed

S. Sen, Koushik Ghosh, Priyankan Datta, 2020 .

Pressure dependence of dryout in a heat-generating porous debris bed

S. Sen, Koushik Ghosh, Priyankan Datta, 2020, Sādhanā.

Characteristics of thermal energy removal from heat-generating porous media considering liquid-vapour phase change

S. Sen, A. Mukhopadhyay, Koushik Ghosh, 2020 .

Investigation of forced convective heat transfer enhancement in the presence of an electric field – a finite element analysis

S. Sen, A. Bandyopadhyay, S. Bhattacharyya, 2004 .

An integral approach for simulation of vapour film dynamics around a spherical surface

Dipankar Sanyal, Swarnendu Sen, Koushik Ghosh, 2009 .

Heatline based Thermal Behaviour During Cooling of a Hot Moving Steel Plate Using Multiple Jets

S. Sen, N. Barman, S. Barman, 2014 .

Dynamic Data-Driven Prediction of Lean Blowout in a Swirl-Stabilized Combustor

Asok Ray, Soumalya Sarkar, Achintya Mukhopadhyay, 2015 .

A methodology to control direct-fired furnaces

Dipankar Sanyal, Swarnendu Sen, Ishwar K. Puri, 2004 .