C. Persson

B. Helgason, S. Ferguson, C. Persson, 2017, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

Structure and composition of silicon nitride and silicon carbon nitride coatings for joint replacements

C. Persson, S. Jacobson, H. Engqvist, 2013 .

Ceramic cement as a potential stand-alone treatment for bone fractures: An in vitro study of ceramic-bone composites.

B. Helgason, S. Ferguson, C. Persson, 2016, Journal of the mechanical behavior of biomedical materials.

Heparinization of Beta Tricalcium Phosphate: Osteo‐immunomodulatory Effects

C. Persson, M. Ginebra, M. Espanol, 2018, Advanced healthcare materials.

An Enhanced Understanding of the Powder Bed Fusion–Laser Beam Processing of Mg-Y3.9wt%-Nd3wt%-Zr0.5wt% (WE43) Alloy through Thermodynamic Modeling and Experimental Characterization

C. Persson, G. Lindwall, P. Mellin, 2022, Materials.

Variation in Calvarial Bone Healing Capacity: A Clinical Study on the Effects of BMP-2-Hydrogel or Bone Autograft Treatments at Different Cranial Locations

C. Persson, M. Beckman, L. Kihlström, 2013, The Journal of craniofacial surgery.

Fabrication and evaluation of SixNy coatings for total joint replacements

C. Persson, S. Jacobson, H. Engqvist, 2012, Journal of Materials Science: Materials in Medicine.

Modelling of Spinal Cord Biomechanics: In Vitro and Computational Approaches

C. Persson, J. Summers, R. Hall, 2010 .

Calcium phosphate cements with strontium halides as radiopacifiers.

C. Persson, H. Engqvist, M. Montazerolghaem, 2014, Journal of biomedical materials research. Part B, Applied biomaterials.

Can Cobalt(II) and Chromium(III) Ions Released from Joint Prostheses Influence the Friction Coefficient?

C. Persson, M. Rutland, Y. Hedberg, 2015, ACS biomaterials science & engineering.

Inflammatory Response to Nano- and Microstructured Hydroxyapatite

C. Persson, W. Xia, G. Mestres, 2015, PloS one.

Scavenging effect of Trolox released from brushite cements.

C. Persson, G. Mestres, M. Ott, 2015, Acta biomaterialia.

Elastic properties and strain-to-crack-initiation of calcium phosphate bone cements: Revelations of a high-resolution measurement technique.

C. Persson, M. Ginebra, Giacomo Lionello, 2017, Journal of the mechanical behavior of biomedical materials.

Microstructural Origins of the Corrosion Resistance of a Mg-Y-Nd-Zr Alloy Processed by Powder Bed Fusion – Laser Beam

C. Persson, P. Mellin, Hanna Nilsson Åhman, 2022, Frontiers in Bioengineering and Biotechnology.

Stability and prospect of UV/H2O2 activated titania films for biomedical use

C. Persson, H. Engqvist, K. Welch, 2013 .

Photocatalytic activity of low temperature oxidized Ti–6Al–4V

C. Persson, H. Engqvist, K. Welch, 2012, Journal of Materials Science: Materials in Medicine.

Effect of calcium phosphate heparinization on the in vitro inflammatory response and osteoclastogenesis of human blood precursor cells

C. Persson, N. Baldini, G. Ciapetti, 2019, Journal of tissue engineering and regenerative medicine.

Functionalized silk promotes cell migration into calcium phosphate cements by providing macropores and cell adhesion motifs

M. Hedhammar, C. Persson, G. Mestres, 2022, Ceramics International.

Biological and biomechanical effects of vancomycin and meropenem in acrylic bone cement.

C. Persson, D. Tigani, M. Baleani, 2008, The Journal of arthroplasty.

An ex-vivo model for the biomechanical assessment of cement discoplasty

C. Persson, P. Isaksson, K. Pazarlis, 2022, Frontiers in Bioengineering and Biotechnology.

Synthesis and assessment of metallic ion migration through a novel calcium carbonate coating for biomedical implants.

C. Persson, H. Engqvist, W. Xia, 2020, Journal of biomedical materials research. Part B, Applied biomaterials.

Application of phase-field fracture theories and digital volume correlation to synchrotron X-ray monitored fractures in human trabecular bone: A case study.

S. Ferguson, C. Persson, P. Isaksson, 2022, Journal of the mechanical behavior of biomedical materials.

The Effect of PCL Addition on 3D-Printable PLA/HA Composite Filaments for the Treatment of Bone Defects

C. Persson, A. Diez-Escudero, Elin Åkerlund, 2022, Polymers.

Si–Fe–C–N Coatings for Biomedical Applications: A Combinatorial Approach

C. Persson, H. Engqvist, G. Hulsart-Billström, 2020, Materials.

Mechanical behaviour of composite calcium phosphate-titanium cranial implants: Effects of loading rate and design.

B. Helgason, S. Ferguson, C. Persson, 2020, Journal of the mechanical behavior of biomedical materials.

The Effect of N, C, Cr, and Nb Content on Silicon Nitride Coatings for Joint Applications

C. Persson, H. Engqvist, M. Tobler, 2020, Materials.

Influence of Substrate Heating and Nitrogen Flow on the Composition, Morphological and Mechanical Properties of SiNx Coatings Aimed for Joint Replacements

C. Persson, H. Engqvist, H. Högberg, 2017, Materials.

Synthesis and characterization of injectable composites of poly[D,L-lactide-co-(ε-caprolactone)] reinforced with β-TCP and CaCO3 for intervertebral disk augmentation.

J. Hilborn, C. Persson, H. Engqvist, 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

The effect of unsaturated fatty acid and triglyceride oil addition on the mechanical and antibacterial properties of acrylic bone cements

C. Persson, H. Engqvist, M. Ginebra, 2015, Journal of biomaterials applications.

Assessing cement injection behaviour in cancellous bone: An in vitro study using flow models

C. Persson, R. Hall, N. Kapur, 2014, Journal of biomaterials applications.

In Situ Synchrotron X-ray Diffraction Analysis of the Setting Process of Brushite Cement: Reaction and Crystal Growth.

C. Persson, H. Engqvist, W. Xia, 2017, ACS applied materials & interfaces.

Comparative characterization of oligomeric precursors intended for injectable implants

J. Hilborn, C. Persson, R. Rojas, 2013 .

Strategies towards injectable, load-bearing materials for the intervertebral disc: a review and outlook

C. Persson, S. Berg, 2012, Journal of Materials Science: Materials in Medicine.

Long-term sensory disturbances after orbitozygomatic fractures.

C. Persson, F. Farnebo, T. K. Lundgren, 2017, Journal of plastic, reconstructive & aesthetic surgery : JPRAS.

Novel injectable biomaterials for bone augmentation based on isosorbide dimethacrylic monomers.

C. Persson, Bartosz Janicki, S. Piaskowski, 2014, Materials science & engineering. C, Materials for biological applications.

Composite injectable materials for vertebroplasty

C. Persson, H. Engqvist, 2012 .

Surface and Subsurface Analyses of Metal-on-Polyethylene Total Hip Replacement Retrievals

C. Persson, H. Engqvist, S. Larsson, 2015, Annals of Biomedical Engineering.

Mechanical effects of the use of vancomycin and meropenem in acrylic bone cement

Marco Viceconti, Massimiliano Baleani, Cecilia Persson, 2006, Acta orthopaedica.

Silk fibroin hydrogels induced and reinforced by acidic calcium phosphate - A simple way of producing bioactive and drug-loadable composites for biomedical applications.

C. Persson, H. Engqvist, Z. Dong, 2021, International journal of biological macromolecules.

Premixed calcium silicate cement for endodontic applications : injectability , setting time and radiopacity

C. Persson, H. Engqvist, 2013 .

Premixed calcium silicate cement for endodontic applications

C. Persson, H. Engqvist, 2011, Biomatter.

Metal Release from a Biomedical CoCrMo Alloy in Mixed Protein Solutions Under Static and Sliding Conditions: Effects of Protein Aggregation and Metal Precipitation

C. Persson, V. Romanovski, Y. Hedberg, 2021, Journal of Bio- and Tribo-Corrosion.

3D-printed PLA/HA composite structures as synthetic trabecular bone: A feasibility study using fused deposition modeling.

C. Persson, Dan Wu, A. Diez-Escudero, 2020, Journal of the mechanical behavior of biomedical materials.

Polyhedral oligomeric silsesquioxane (POSS)–poly(ethylene glycol) (PEG) hybrids as injectable biomaterials

C. Persson, H. Engqvist, Alejandro López, 2012, Biomedical materials.

A ready-to-use acidic, brushite-forming calcium phosphate cement.

C. Persson, H. Engqvist, Jun Luo, 2018, Acta biomaterialia.

Monetite-based composite cranial implants demonstrate long-term clinical volumetric balance by concomitant bone formation and degradation.

C. Persson, H. Engqvist, J. Åberg, 2021, Acta biomaterialia.

Fatigue performance of a high-strength, degradable calcium phosphate bone cement.

C. Persson, C. Öhman-Mägi, A. Holmberg, 2018, Journal of the mechanical behavior of biomedical materials.

Compressive fatigue properties of an acidic calcium phosphate cement—effect of phase composition

Cecilia Persson, C. Persson, Ingrid Ajaxon, 2017, Journal of Materials Science: Materials in Medicine.

Compressive, diametral tensile and biaxial flexural strength of cutting-edge calcium phosphate cements.

C. Persson, H. Engqvist, Jun Luo, 2016, Journal of the mechanical behavior of biomedical materials.

Long-Term In Vitro Degradation of a High-Strength Brushite Cement in Water, PBS, and Serum Solution

C. Persson, C. Öhman, Ingrid Ajaxon, 2015, BioMed research international.

Porosity prediction of calcium phosphate cements based on chemical composition

C. Persson, H. Engqvist, M. Ginebra, 2015, Journal of Materials Science: Materials in Medicine.

Evaluation of a porosity measurement method for wet calcium phosphate cements

C. Persson, M. Ginebra, C. Öhman, 2015, Journal of biomaterials applications.

The effect of composition on mechanical properties of brushite cements.

C. Persson, H. Engqvist, Johanna Engstrand, 2014, Journal of the mechanical behavior of biomedical materials.

Influence of polymer addition on the mechanical properties of a premixed calcium phosphate cement

C. Persson, H. Engqvist, Johanna Engstrand, 2013, Biomatter.

Changes in the drug release pattern of fresh and set simvastatin-loaded brushite cement.

C. Persson, G. Mestres, M. Ginebra, 2016, Materials science & engineering. C, Materials for biological applications.

Nano grain sized zirconia–silica glass ceramics for dental applications

C. Persson, H. Engqvist, W. Xia, 2012 .

In vivo response to a low-modulus PMMA bone cement in an ovine model.

C. Persson, G. Hulsart-Billström, M. Nilsson, 2018, Acta biomaterialia.

Brushite foams—the effect of Tween® 80 and Pluronic® F‐127 on foam porosity and mechanical properties

C. Persson, H. Engqvist, M. Ginebra, 2015, Journal of biomedical materials research. Part B, Applied biomaterials.

Enhanced Drug Delivery of Antibiotic-Loaded Acrylic Bone Cements Using Calcium Phosphate Spheres

C. Persson, H. Engqvist, W. Xia, 2015, Journal of applied biomaterials & functional materials.

Influence of cement compressive strength and porosity on augmentation performance in a model of orthopedic screw pull-out.

Håkan Engqvist, Philip Procter, Cecilia Persson, 2018, Journal of the mechanical behavior of biomedical materials.

Mechanical Properties of Brushite Calcium Phosphate Cements

C. Persson, Ingrid Ajaxon, 2017 .

Compressive fatigue properties of commercially available standard and low-modulus acrylic bone cements intended for vertebroplasty.

C. Persson, C. Öhman-Mägi, C. Robo, 2018, Journal of the mechanical behavior of biomedical materials.

Towards Functional Silicon Nitride Coatings for Joint Replacements

C. Persson, H. Engqvist, K. Leifer, 2019, Coatings.

Functional Properties of Low-Modulus PMMA Bone Cements Containing Linoleic Acid

J. Hilborn, C. Persson, C. Öhman-Mägi, 2021, Journal of functional biomaterials.

A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement.

C. Persson, C. Canal, G. Mestres, 2017, Journal of the mechanical behavior of biomedical materials.

The Addition of Poly(Vinyl Alcohol) Fibers to Apatitic Calcium Phosphate Cement Can Improve Its Toughness

C. Persson, H. Engqvist, Jun Luo, 2019, Materials.

Wear Performance of a Novel Silicon Nitride Ceramic for Biomedical Applications

C. Persson, H. Engqvist, W. Xia, 2023, Biomedical Materials & Devices.

Porous polylactic acid scaffolds for bone regeneration: A study of additively manufactured triply periodic minimal surfaces and their osteogenic potential

C. Persson, P. Isaksson, A. Diez-Escudero, 2020, Journal of tissue engineering.

Direct and interactive effects of three variables on properties of PMMA bone cement for vertebral body augmentation

C. Persson, H. Engqvist, Erik Unosson, 2011, Journal of materials science. Materials in medicine.

The effect of two types of resorbable augmentation materials - a cement and an adhesive - on the screw pullout pullout resistance in human trabecular bone.

S. Ferguson, C. Persson, P. Procter, 2020, Journal of the mechanical behavior of biomedical materials.

Trabecular deformations during screw pull-out: a micro-CT study of lapine bone

C. Persson, P. Procter, P. Isaksson, 2017, Biomechanics and Modeling in Mechanobiology.

Long-term mechanical properties of a novel low-modulus bone cement for the treatment of osteoporotic vertebral compression fractures.

C. Persson, C. Öhman-Mägi, C. Robo, 2021, Journal of the mechanical behavior of biomedical materials.

- 1-A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement

C. Persson, C. Canal, G. Mestres, 2017 .

Nanostructured Ag‐Bioglass Implant Coatings with Antibacterial and Osteogenic Activity

G. Sotiriou, C. Persson, M. Chatzinikolaidou, 2022, Advanced Materials Interfaces.

Bioactive Silicon Nitride Implant Surfaces with Maintained Antibacterial Properties

C. Persson, H. Engqvist, W. Xia, 2022, Journal of functional biomaterials.

Evaluation of silicon nitride as a wear resistant and resorbable alternative for total hip joint replacement

C. Persson, S. Jacobson, H. Engqvist, 2012, Biomatter.

Hexagonal pore geometry and the presence of hydroxyapatite enhance deposition of mineralized bone matrix on additively manufactured polylactic acid scaffolds.

C. Persson, N. Hailer, A. Diez-Escudero, 2021, Materials science & engineering. C, Materials for biological applications.

Biocompatibility of a Zr-Based Metallic Glass Enabled by Additive Manufacturing

C. Persson, B. Hjörvarsson, N. Ferraz, 2022, ACS applied bio materials.

BIOMATERIALS STUDIES SETTING TIME AND INITIAL COMPRESSIVE STRENGTH OF A RADIO-OPAQUE PREMIXED CALCIUM PHOSPHATE CEMENT

C. Persson, H. Engqvist, P. Thomsen, 2011 .

The Effect of Coating Density on Functional Properties of SiNx Coated Implants

C. Persson, H. Engqvist, K. Leifer, 2019, Materials.

Morphology and Dissolution Rate of Wear Debris from Silicon Nitride Coatings.

C. Persson, H. Engqvist, Charlotte Skjöldebrand, 2016, ACS biomaterials science & engineering.

Dissolution behaviour of silicon nitride coatings for joint replacements.

A. Neville, C. Persson, R. Hall, 2016, Materials science & engineering. C, Materials for biological applications.

Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements.

C. Persson, S. Jacobson, H. Engqvist, 2013, Journal of the mechanical behavior of biomedical materials.

The Effect of Al Addition on the Tribological Behavior of Ti−Si−Zr Alloys

C. Persson, H. Engqvist, S. Tkachenko, 2019, Journal of Tribology.

Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications.

Staffan Jacobson, Håkan Engqvist, Cecilia Persson, 2014, Journal of the mechanical behavior of biomedical materials.

Zebrafish embryo as a replacement model for initial biocompatibility studies of biomaterials and drug delivery systems.

Cecilia Persson, David Gibbs, Håkan Engqvist, 2019, Acta biomaterialia.

Persistent diplopia after fractures involving the orbit related to nerve injury.

C. Persson, F. Farnebo, T. K. Lundgren, 2015, Journal of plastic, reconstructive & aesthetic surgery : JPRAS.

A new bone adhesive candidate- does it work in human bone? An ex-vivo preclinical evaluation in fresh human osteoporotic femoral head bone.

C. Persson, P. Procter, H. Engqvist, 2022, Injury.

Compressive fatigue properties of a commercially available acrylic bone cement for vertebroplasty

Cecilia Persson, C. Persson, Ingrid Ajaxon, 2014, Biomechanics and modeling in mechanobiology.

Characterization of interfacial stress transfer ability in acetylation-treated wood fibre composites using X-ray microtomography

C. Persson, P. Isaksson, T. Joffre, 2017 .

Radiopacity of tantalum-loaded acrylic bone cement

C. Persson, L. Pierotti, M. Baleani, 2006, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Low-Modulus PMMA Has the Potential to Reduce Stresses on Endplates after Cement Discoplasty

C. Persson, P. Försth, S. Lewin, 2022, Journal of functional biomaterials.

Numerical description and experimental validation of a rheology model for non-Newtonian fluid flow in cancellous bone.

Luca Cristofolini, Stephen J Ferguson, Cecilia Persson, 2013, Journal of the mechanical behavior of biomedical materials.

The effect of oligo(trimethylene carbonate) addition on the stiffness of acrylic bone cement

J. Hilborn, C. Persson, H. Engqvist, 2016, Biomatter.

Biomechanics of low-modulus and standard acrylic bone cements in simulated vertebroplasty: A human ex vivo study.

C. Persson, R. Hall, H. Engqvist, 2015, Journal of biomechanics.

Fe and C additions decrease the dissolution rate of silicon nitride coatings and are compatible with microglial viability in 3D collagen hydrogels.

C. Persson, J. Kreuger, A. Palmquist, 2023, Biomaterials science.

Tailoring the dissolution rate and in vitro cell response of silicon nitride coatings through combinatorial sputtering with chromium and niobium.

C. Persson, G. Hulsart-Billström, Charlotte Skjöldebrand, 2022, Biomaterials science.

Strain-induced stiffening of nanocellulose-reinforced poly(vinyl alcohol) hydrogels mimicking collagenous soft tissues.

C. Persson, A. Mihranyan, R. Rojas, 2017, Soft matter.

Comparison of a quasi-dynamic and a static extraction method for the cytotoxic evaluation of acrylic bone cements.

C. Persson, H. Engqvist, A. Hoess, 2016, Materials science & engineering. C, Materials for biological applications.

Low-modulus PMMA bone cement modified with castor oil.

C. Persson, H. Engqvist, T. Thersleff, 2011, Bio-medical materials and engineering.

The porous cantilever beam as a model for spinal implants: Experimental, analytical and finite element analysis of dynamic properties.

S. Ferguson, C. Persson, Yijun Zhou, 2023, Mathematical biosciences and engineering : MBE.

Compressive fatigue properties of a commercially available acrylic bone cement for vertebroplasty

C. Persson, Ingrid Ajaxon, 2014, Biomechanics and Modeling in Mechanobiology.

The effect of gentamicin on the fracture properties of bone cement

Marco Viceconti, Massimiliano Baleani, Cecilia Persson, 2006 .

Fretting of CoCrMo and Ti6Al4V alloys in modular prostheses

C. Persson, H. Engqvist, M. Bryant, 2015 .

Density and mechanical properties of vertebral trabecular bone—A review

C. Persson, R. Hall, Dan Wu, 2021, JOR spine.

Wear performance of a new biocompatible silicon nitride for biomedical applications

C. Persson, H. Engqvist, W. Xia, 2020 .

The Potential of Stereolithography for 3D Printing of Synthetic Trabecular Bone Structures

C. Persson, O. Eriksson, J. Kreuger, 2021, Materials.

Multifunctional polymer-free mineral plastic adhesives formed by multiple non-covalent bonds.

C. Persson, M. Strømme, Jun Luo, 2020, ACS applied materials & interfaces.

SiNx Coating Deposition on CoCr by Plasma-Enhanced Chemical Vapor Deposition

C. Persson, H. Engqvist, W. Xia, 2023, Biomedical Materials & Devices.

Hyperelastic Nanocellulose-Reinforced Hydrogel of High Water Content for Ophthalmic Applications.

C. Persson, A. Mihranyan, N. Ferraz, 2016, ACS Biomaterials Science & Engineering.

Implicit and explicit ﬁnite element models predict the mechanical response of calcium phosphate-titanium cranial implants.

B. Helgason, S. Ferguson, C. Persson, 2020, Journal of the mechanical behavior of biomedical materials.

The effect of gentamicin sulphate on the fracture properties of a manually mixed bone cement

M. Viceconti, C. Persson, P. Erani, 2007 .

Additively Manufactured Mesh-Type Titanium Structures for Cranial Implants: E-PBF vs. L-PBF

B. Helgason, S. Ferguson, C. Persson, 2020, Materials & Design.

A combined experimental and numerical method to estimate the elastic modulus of single trabeculae.

S. Ferguson, C. Persson, P. Isaksson, 2021, Journal of the mechanical behavior of biomedical materials.

Trabecular deformations during screw pull-out: a micro-CT study of lapine bone

C. Persson, P. Procter, P. Isaksson, 2017, Biomechanics and Modeling in Mechanobiology.

Surface and Subsurface Analyses of Metal-on-Polyethylene Total Hip Replacement Retrievals

C. Persson, H. Engqvist, S. Larsson, 2016, Annals of Biomedical Engineering.

2012 Landes Bioscience. Do not distribute. Evaluation of silicon nitride as a wear resistant and resorbable alternative for total hip joint replacement

C. Persson, S. Jacobson, H. Engqvist, 2012 .

TRIBOLOGICAL PROPERTIES OF Ti-Si-Zr ALLOYS

C. Persson, H. Engqvist, S. Tkachenko, 2013 .

Robocasting of biomimetic hydroxyapatite scaffolds using self-setting inks.

C. Persson, M. Ginebra, C. Öhman, 2014, Journal of materials chemistry. B.

Compressive mechanical properties and cytocompatibility of bone-compliant, linoleic acid-modified bone cement in a bovine model.

B. Helgason, S. Ferguson, C. Persson, 2014, Journal of the mechanical behavior of biomedical materials.

Young's modulus of trabecular bone at the tissue level: A review.

S. Ferguson, C. Persson, P. Isaksson, 2018, Acta biomaterialia.

Morphology and Dissolution Rate of Wear Debris from Silicon Nitride Coatings.

C. Persson, H. Engqvist, Charlotte Skjöldebrand, 2016, ACS biomaterials science & engineering.

Osteogenesis by foamed and 3D-printed nanostructured calcium phosphate scaffolds: Effect of pore architecture.

C. Persson, M. Manzanares, M. Ginebra, 2018, Acta biomaterialia.