Chung-Ho Chen

发表

Robustness of the EWMA median control chart to non-normality

Yu Chang Lin, C. Chou, Chung-Ho Chen, 2017 .

Economic Design of Dodge-Romig AOQL Single Sampling Plans by Variables with the Quadratic Loss Function

Chung-Ho Chen, Chung-Ho Chen, 2005 .

Optimal quality investment, replenishment cycle time, and credit period for the buyer-seller decision model

C. Chou, Chung-Ho Chen, 2021 .

The joint determination of process mean, warranty period, replenishment cycle time, and trade credit period under the single-manufacturer single-retailer model

C. Chou, Chung-Ho Chen, 2021, Journal of Statistics and Management Systems.

The joint determination of process mean, quality investment, replenishment cycle time, and credit period for the integrated supply chain model

C. Chou, Chung-Ho Chen, 2021 .

The integrated supply chain model considering process mean, replenishment cycle time and credit period

C. Chou, Chung-Ho Chen, 2020 .

Economic capital investment for quality improvement

Chung-Ho Chen, 2017 .

On the present worth of multivariate quality loss

Chao-Yu Chou, Chung-Ho Chen, C. Chou, 2001 .

Optimum profit model under the single variable sampling plan with consumer’s quality protection

C. Chou, Chung-Ho Chen, 2021 .

Modified single-vendor single-buyer supply chain model with quality loss for product

Chung-Ho Chen, Wen-Ren Tsai, 2016 .

Optimum process mean setting with specified average outgoing quality limit protection for variable single sampling plan

Chung-Ho Chen, 2016 .

Modified economic production and raw material model with quality loss for conforming product

C. Chou, Chung-Ho Chen, Chao-Chin Kan, 2015 .

Economic specification limits and process mean settings by considering unequal target value and specification center

C. Chou, Chung-Ho Chen, Chao-Chin Kan, 2014 .

The optimum settings for order quantity, process quality level, and warranty period

Chung-Ho Chen, Chi-Pin Hsu, 2011 .

A note on some modified Pulak and Al-Sultan's model

Chung-Ho Chen, 2010 .

The Modified Pulak and Al-Sultan's Model for Determining the Optimum Process Parameters

Chung-Ho Chen, Chung-Ho Chen, 2006 .

Group runs revised m-of-k runs rule control chart

Ming Ha Lee, Chung-Ho Chen, M. Khoo, 2017 .

Determining the optimum process mean under a Gamma distribution

Chung-Ho Chen, 2005 .

The Modified Carlsson's Model for Setting the Optimum Process Mean

Chung-Ho Chen, 2012 .

Optimum Process Mean for a One-Sided Specification Limit Product Considering Manufacturing Cost and Quadratic Quality Loss

Chung-Ho Chen, Kuo‐Wei Huang, 2006 .

Determining the optimum Process Mean for the Product with Screening Limits

Chung-Ho Chen, 2005 .

The Optimum Manufacturing Target under the Quality Loss Function

Chung-Ho Chen, 2004 .

Quality control for production and shipment process of product

C. Chou, Chung-Ho Chen, 2022, Journal of Information and Optimization Sciences.

The asymmetric specification limit and quality investment settings for rectifying inspection plan

C. Chou, Chung-Ho Chen, 2022, Journal of Information and Optimization Sciences.

Economic design of Dodge-Romig LTPD single sampling plans for variables under Taguchi's quality loss function

Chung-Ho Chen, Chao-Yu Chou, 陳忠和, 2001 .

Optimal Determination of Purchaser's Order Quantity and Producer's Process Mean

C. Chou, Chung-Ho Chen, 2012 .

A bivariate optimal replacement policy with cumulative repair cost limit for a two-unit system under shock damage interaction

Chung-Ho Chen, Min-Tsai Lai, T. Hariguna, 2017 .

Average Outgoing Quality Limit for Short-Run CSP-1 Plan

陳忠和, Chung-Ho Chen, 2005 .

Minimum Average Fraction Inspected for Modified Tightened Two-level Continuous Sampling Plans

Chung-Ho Chen, 2004 .

Minimum average fraction inspected for TCSP-1 plan

C. Chou, Chung-Ho Chen, Te-Shiang Cheng, 2001 .

JOINT DETERMINATION OF OPTIMUM PROCESS MEAN AND ECONOMIC SPECIFICATION LIMITS FOR RECTIFYING INSPECTION PLAN WITH INSPECTION ERROR

Chung-Ho Chen, M. Khoo, 2008 .

The determination of product and process parameters under the non-normal distribution

Chung-Ho Chen, 2018, Journal of Information and Optimization Sciences.

Process parameters and screening limits settings under the non-normal process

Chung-Ho Chen, 2018 .

Optimum process mean, standard deviation and specification limits settings under the Burr distribution

Chung-Ho Chen, Chao-Yu Chou, C. Chou, 2017 .

Economic Design of Process Mean, Standard Deviation and Screening Limits Based on Burr Distribution

Chung-Ho Chen, Chung-Ho Chen, 2017 .

On the bootstrap confidence intervals of the process incapability index Cpp

Chung-Ho Chen, Yu-Chang Lin, Chao-Yu Chou, 2006, Reliab. Eng. Syst. Saf..

Acceptance control charts for non-normal data

Chung-Ho Chen, Chao-Yu Chou, Hui-Rong Liu, 2005 .

Interval Estimation for the Smaller-the-Better Type of Signal-to-Noise Ratio using Bootstrap Method

C. Chou, Chung-Ho Chen, Hui-Rong Liu, 2004 .

Effect of Nonnormality on the Economic Design of Warning Limit Charts

Chao-Yu Chou, Chung-Ho Chen, C. Chou, 2004 .

MINIMUM-LOSS DESIGN OF X-BAR CONTROL CHARTS FOR NON-NORMALLY CORRELATED DATA

Chao-Yu Chou, Chun-Lang Chang, Chung-Ho Chen, 2002 .

Economic-statistical design of X ¥ charts for non-normal data by considering quality loss

Chao-Yu Chou, Chung-Ho Chen, C. Chou, 2000 .

A Note on Selecting Target and Process Capability Index Based on Fuzzy Optimization

C. Chou, Chung-Ho Chen, 2002 .

Economic statistical np‐control chart designs based on fuzzy optimization

Reay‐Chen Wang, Chung‐Ho Chen, Reay-Chen Wang, 1995 .

Application of computer simulation to the design of a traffic signal timer

Chung-Ho Chen, Ming-Hsien Caleb Li, Chao-Yu Chou, 2001 .

Optimum profit model based on the average outgoing quality limit protection

Chao-Yu Chou, Chung-Ho Chen, C. Chou, 2021, Journal of Statistics and Management Systems.

Modified optimum profit model with single supplier and multi-retailers under the consignment policy

Chung-Ho Chen, Chao-Chin Kan, 2015 .

Optimum profit model considering production, quality and sale problem

Chung-Ho Chen, Chih-Lun Lu, Chung-Ho Chen, 2011, Int. J. Syst. Sci..

The Joint Determination of Optimum Process Mean and Economic Order Quantity

Chung-Ho Chen, Chung-Ho Chen, 2011 .

Applying game theory in Newsvendor’s supply chain model

Chung-Ho Chen, 2021 .

Determining the optimum process mean based on quadratic quality loss function and rectifying inspection plan

Chung-Ho Chen, Min-Tsai Lai, Chung-Ho Chen, 2007, Eur. J. Oper. Res..

Joint Economic Design of Variable Sampling Intervals (X) and R Charts Using Genetic Algorithms

Chao-Yu Chou, Chung-Ho Chen, C. Chou, 2006 .

Optimal process mean, specification limits, replenishment cycle time, and credit period for the buyer-seller model with specified capability value

Chao-Yu Chou, Chung-Ho Chen, C. Chou, 2021 .

Optimal process mean setting by considering sampling inspection and process capability

Chung-Ho Chen, Chao-Yu Chou, C. Chou, 2020 .

The integrated quality control model with product inspection and process improvement

Chung-Ho Chen, Chao-Yu Chou, C. Chou, 2020 .

The integrated study for process improvement with economic specification limits, process means setting and quality investment: an extension of the model in Abdul-Kader et al. (2010)

Chung-Ho Chen, Chao-Yu Chou, C. Chou, 2020 .

Modified Pulak & Al-Sultan’s model with specified Cpmk value

Chung-Ho Chen, 2019, Journal of Statistics and Management Systems.

Economic design of product and process parameters under the specified process capability value

Chung-Ho Chen, Chao-Yu Chou, C. Chou, 2018 .

The joint determination of specification limits, process mean, and economic manufacturing quantity

C. Chou, Chung-Ho Chen, 2017 .

Tolerance design based on specified process capability value

Chung-Ho Chen, Chao-Chin Kan, Chung-Ho Chen, 2015 .

Production quantity and specification limits settings by considering specified process capability value

Chung-Ho Chen, Michael B. C. Khoo, Chao-Yu Chou, 2014 .

The effect of correlation on the economic design of warning limit X-bar charts

Chao-Yu Chou, Chung-Ho Chen, C. Chou, 2003 .

Minimum-loss design of x-bar charts for correlated data

Chao-Yu Chou, Chung-Ho Chen, C. Chou, 2002 .

Economic design of continuous sampling plan under linear inspection cost

Chao-Yu Chou, Chung-Ho Chen, C. Chou, 2002 .

Design of a CSP-1 plan based on regret-balanced criterion

Chao-Yu Chou, Chung-Ho Chen, C. Chou, 2000 .

Specification limit under a quality loss function

Chung-Ho Chen, Chung-Ho Chen, 1999 .

Minimum average fraction inspected for continuous sampling plan CSP-1 under inspection error

Chung-Ho Chen, Reay-Chen Wang, Chung-Ho Chen, 1997 .

Economic-Statistical Design of Multivariate Control Charts Using Quality Loss Function

Chung-Ho Chen, Chao-Yu Chou, Hui-Rong Liu, 2002 .

The run sum t control chart for monitoring process mean changes in manufacturing

Michael B. C. Khoo, M. Shamsuzzaman, Chung-Ho Chen, 2014 .

Economic Design of EWMA Charts with Variable Sampling Intervals

Chao-Yu Chou, Chung-Ho Chen, C. Chou, 2006 .

A synthetic double sampling control chart for the process mean

Philippe Castagliola, Zhang Wu, Chung-Ho Chen, 2010 .

Optimal process mean and standard deviation settings for rectifying sampling inspection plan with quality investment

Chung-Ho Chen, Chung-Ho Chen, 2019, Journal of Statistics and Management Systems.