I. Peruš

发表

A NON-PARAMETRIC APPROACH TO ATTENUATION RELATIONS

P. Fajfar, I. Peruš, 1997 .

P. Fajfar, I. Peruš, M. Fardis, 2014 .

Quantifying complex influences of chemical composition and soaking conditions for increasing the hot workability of M2 high-speed steel by using the alternative approach

I. Peruš, H. Palkowski, G. Kugler, 2020 .

On the inelastic torsional response of single‐storey structures under bi‐axial excitation

Iztok Peruš, Peter Fajfar, P. Fajfar, 2005 .

Hot deformation and mechanical properties

I. Peruš, P. Cvahte, G. Kugler, 2011 .

Hot deformation and mechanical properties of P/M Al special

I. Peruš, P. Cvahte, G. Kugler, 2011 .

Neural network analysis of the influence of chemical composition on surface cracking during hot rolling of AISI D2 tool steel

R. Turk, I. Peruš, G. Kugler, 2008 .

Calculation of stress-strain dependence from tensile tests at high temperatures using final shapes of specimen’s contours Določitev odvisnosti napetost – deformacija z nateznimi preiz-

R. Turk, I. Peruš, G. Kugler, 2013 .

The external validation of a difficulty scoring system for predicting the risk of intraoperative complications during laparoscopic liver resection

I. Peruš, A. Ivanecz, S. Potrč, 2019, BMC Surgery.

Fragility curves of RC columns estimated by the CAE method

I. Peruš, K. Sinkovič, 2015 .

How Reliable are the Ground Motion Prediction Equations

P. Fajfar, I. Peruš, 2009 .

Influence of the chemical composition and process parameters on the mechanical properties of an extruded aluminium alloy for highly loaded structural parts

Iztok Peruš, M. Terčelj, G. Kugler, 2013 .

Contour Maps for Simultaneous Increase in Yield Strength and Elongation of Hot Extruded Aluminum Alloy 6082

I. Peruš, G. Kugler, M. Tercelj, 2022, Metals.

Influence of cooling mode in relation to casting and extrusion parameters on mechanical properties of AA6082

I. Peruš, G. Kugler, M. Tercelj, 2017 .

Wear Progress of Nitrided Layer at Low, Medium and High Contact Pressures During a Laboratory Simulation of Aluminium Hot Extrusion

I. Peruš, G. Kugler, M. Tercelj, 2014, Tribology Letters.

The progress of degradation on the bearing surfaces of nitrided dies for aluminium hot extrusion with two different relative lengths of bearing surface

P. Fajfar, I. Peruš, M. Tercelj, 2013 .

Wear Progress Of Nitrided Microstructures InTribological Simulation OfAluminium Hot Extrusion

I. Peruš, G. Kugler, M. Tercelj, 2011 .

TORSIONAL EFFECTS IN THE PUSHOVER-BASED SEISMIC ANALYSIS OF BUILDINGS

Iztok Peruš, Peter Fajfar, Damjan Marušić, 2005 .

Amelioration of surface cracking during hot rolling of AISI D2 tool steel

I. Peruš, G. Kugler, M. Tercelj, 2018, Materials Science and Technology.

Improving of hot workability and expanding the temperature range of safe hot working for M35 high-speed steel

I. Peruš, M. Godec, G. Kugler, 2017 .

Assessment of the seismic performance of low-rise RC structures by procedures with different levels of complexity

P. Fajfar, I. Peruš, K. Sinkovič, 2015, Bulletin of Earthquake Engineering.

ON FUNDAMENTAL PRINCIPLES OF THE OPTIMAL NUMBER AND LOCATION OF LOADING BAYS IN URBAN AREAS

Tomislav LETNIK, Iztok PERUŠ, Stane BOŽIČNIK, 2019 .

Determination of scrap/supply probability curves for the mechanical properties of aluminium alloys in hot extrusion using a neural network-like approach

Iztok Perus, Milan Tercelj, Goran Kugler, 2012, Expert Syst. Appl..

Towards Improved Reliability of the Analysis of Factors Influencing the Properties on Steel in Industrial Practice

Iztok Peruš, G. Kugler, Tatjana Vecko-Pirtovsek, 2009 .

Fragility Curves for Material Characteristics and Damage Index for Brick Masonry Exposed to Freeze–Thaw Action

I. Peruš, M. Uranjek, M. Skrinar, 2021, Applied Sciences.

Flexural deformation capacity of rectangular RC columns determined by the CAE method

Iztok Peruš, Karmen Poljanšek, Peter Fajfar, 2006 .

Evaluation of the Iwate Model for Predicting the Difficulty of Laparoscopic Liver Resection: Does Tumor Size Matter?

I. Peruš, A. Ivanecz, S. Potrč, 2020, Journal of Gastrointestinal Surgery.

The Learning Curve of Laparoscopic Liver Resection Utilising a Difficulty Score

I. Peruš, A. Ivanecz, S. Potrč, 2021, Radiology and oncology.

A non-parametric CAE approach to office rents: Identification of Helsinki metropolitan area submarkets

Kauko Viitanen, Marjan Ceh, Iztok Perus, 2012, Expert Syst. Appl..

Hot Workability of M42 Tool Steel Additionally Alloyed with Co and Mo

I. Peruš, G. Kugler, M. Tercelj, 2013 .

Improving Hot Workability of Ledeburitic Tool Steels

I. Peruš, G. Kugler, M. Tercelj, 2012 .

Possibilties of further increasing the hot workability of ledeburitic tool steels

P. Fajfar, I. Peruš, G. Kugler, 2015 .

Hysteretic energy dissipation capacity and the cyclic to monotonic drift ratio for rectangular RC columns in flexure

Iztok Peruš, Karmen Poljanšek, Peter Fajfar, 2009 .

Analysis of influential parameters for accelerated degradation of ballast railway track

I. Peruš, S. Lenart, M. Uranjek, 2020 .

New starting points for the prediction of tool wear in hot forging

M. Terčelj, I. Peruš, R. Turk, 2004 .

Ground‐motion prediction by a non‐parametric approach

Iztok Peruš, Peter Fajfar, P. Fajfar, 2010 .

Prediction of site factors by a non‐parametric approach

Iztok Peruš, Peter Fajfar, P. Fajfar, 2014 .

PREDICTION OF SOIL FACTORS BY A PARAMETRIC APPROACH Paper Title Line 1 NON-PARAMETRIC APPROACH

P. Fajfar, I. Peruš, 2012 .

PREDICTION OF SITE-SPECIFIC GROUND-MOTION PARAMETERS BY A NON-PARAMETRIC APPROACH

P. Fajfar, I. Peruš, 2011 .

Flexible Assignment of Loading Bays for Efficient Vehicle Routing in Urban Last Mile Delivery

Iztok Peruš, Matej Mencinger, Tomislav Letnik, 2020, Sustainability.