S. Seelecke

G. Acciani, G. Rizzello, S. Seelecke, 2018, 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe).

Torsional vibration of a shape memory wire

Stefan Seelecke, S. Seelecke, 1997 .

FE Simulation and Optimal Control of Adaptive Beams Using SMA Wires

S. Seelecke, 2007 .

The Role of Thermomechanical Coupling in the Dynamic Behavior of Shape Memory Alloys

S. Seelecke, H. Sahota, O. Kastner, 2001 .

NiTi-Based Elastocaloric Cooling on the Macroscale: From Basic Concepts to Realization

A. Schütze, S. Seelecke, J. Frenzel, 2018, Energy Technology.

Development and validation of a fatigue testing setup for dielectric elastomer membrane actuators

G. Rizzello, S. Seelecke, Marc Hill, 2019, Smart Materials and Structures.

Thermographic investigation of strain rate effects in Al foams and Ni/Al hybrid foams

S. Seelecke, M. Schmidt, S. Diebels, 2018, Materials & Design.

Effect of actuation parameters and environment on the breakdown voltage of silicone dielectric elastomer films

S. Seelecke, Bettina Fasolt, F. Welsch, 2019, Smart Materials and Structures.

Fabrication and characterization of a dual-joint smart inhaler nozzle actuated by embedded SMA wires

S. Seelecke, S. Furst, 2014 .

Finite element modelling of the vibro-acoustic response in dielectric elastomer membranes

G. Moretti, G. Rizzello, S. Seelecke, 2022, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Optimizing Ni-Ti-based shape memory alloys for ferroic cooling

A. Schütze, S. Seelecke, J. Frenzel, 2017 .

Development of a Reconfigurable End-Effector Prototype

Stefan Seelecke, Paul Motzki, Frank Khelfa, 2017 .

FE modeling of multiple SMA wire actuated adaptive structures

Stefan Seelecke, Nicole M. Lewis, S. Seelecke, 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Soft Morphing Buttons Based on Actuator and Sensor Properties of Shape Memory Alloy Wires

Stefan Seelecke, Yannik Goergen, Paul Motzki, 2019, ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems.

Adaptive Material Handling System Based on Shape Memory Alloy Actuators

Stefan Seelecke, Gianluca Rizzello, Paul Motzki, 2020 .

Electromechanical evaluation of sub-micron NiCr-carbon thin films as highly conductive and compliant electrodes for dielectric elastomers

S. Seelecke, Bettina Fasolt, G. Schultes, 2020 .

Concepts and Clinical Aspects of Active Implants for the Treatment of Bone Fractures.

S. Seelecke, B. Ganse, S. Diebels, 2022, Acta biomaterialia.

A multi-domain dynamical model for cone-shaped dielectric elastomer loudspeakers

Stefan Seelecke, Gianluca Rizzello, Marco Fontana, 2021, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Experimental Analysis of Continuous Vibrations in Dielectric Elastomer Membrane Actuators via Three-Dimensional Laser Vibrometry

G. Rizzello, S. Seelecke, S. Nalbach, 2019, Journal of Vibration and Acoustics.

Towards Sensorless Configuration Estimation in Multi-DoF Soft Robotic Structures Driven by Rolled Dielectric Elastomer Actuators

G. Rizzello, S. Seelecke, J. Prechtl, 2022, 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM).

Numerical simulation and experimental investigation of the elastocaloric cooling effect in sputter-deposited TiNiCuCo thin films

A. Schütze, S. Seelecke, M. Kohl, 2018 .

Development of a nonintrusive pressure sensor for polymer tubes based on dielectric elastomer membranes

G. Rizzello, S. Seelecke, P. Loew, 2019, Sensors and Actuators A: Physical.

A finite element model of rigid body structures actuated by dielectric elastomer actuators

G. Rizzello, S. Seelecke, P. Linnebach, 2018 .

Development and experimental characterization of a dielectric elastomer membrane strip actuator

G. Rizzello, S. Seelecke, Marc Hill, 2018 .

A bi-stable soft robotic bendable module driven by silicone dielectric elastomer actuators: design, characterization, and parameter study

G. Rizzello, S. Seelecke, J. Prechtl, 2022, Smart Materials and Structures.

Experimental Investigation of a Loaded Circular Dielectric Electro-Active Polymer Actuator Coupled to Negative-Rate Bias Spring Mechanism

A. York, S. Seelecke, M. Hodgins, 2012 .

A Thermo-Magneto-Mechanical Model for Ferromagnetic Shape Memory Thin Film Actuators

S. Seelecke, Kwok-lun Lee, 2005 .

Applicability of correlated digital image correlation and infrared thermography for measuring mesomechanical deformation in foams and auxetics

S. Seelecke, S. Diebels, M. Reis, 2022, GAMM-Mitteilungen.

Novel Experimental Approach to Determine Elastocaloric Latent Heat

A. Schütze, S. Seelecke, Susanne-Marie Kirsch, 2019, Shape Memory and Superelasticity.

Experimental parameter identification for elastocaloric air cooling

A. Schütze, S. Seelecke, Marvin Schmidt, 2019, International Journal of Refrigeration.

High-speed and high-efficiency shape memory alloy actuation

Stefan Seelecke, Gianluca Rizzello, Paul Motzki, 2018, Smart Materials and Structures.

Experimental Investigation of High-Speed/High-Voltage SMA Actuation

S. Seelecke, T. Würtz, P. Motzki, 2017 .

Numerical and experimental analysis of inhomogeneities in SMA wires induced by thermal boundary conditions

S. Seelecke, S. Furst, J. Crews, 2012, Continuum Mechanics and Thermodynamics.

Resistance monitoring of shape memory material stabilization during elastocaloric training

A. Schütze, S. Seelecke, Susanne-Marie Kirsch, 2019, Smart Materials and Structures.

Elasticity and stress relaxation of a very small vocal fold.

Stefan Seelecke, Rolf Müller, Alexander York, 2011, Journal of biomechanics.

Nanoscale Nickel-Based Thin Films as Highly Conductive Electrodes for Dielectric Elastomer Applications with Extremely High Stretchability up to 200.

G. Rizzello, S. Seelecke, G. Schultes, 2021, ACS applied materials & interfaces.

Thermal Stabilization of NiTiCuV Shape Memory Alloys: Observations During Elastocaloric Training

A. Schütze, S. Seelecke, G. Eggeler, 2015, Shape Memory and Superelasticity.

Optimal control of piezoceramic actuators

Stefan Seelecke, Ralph C. Smith, Jinghua Zhong, 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Performance Prediction and Scaling Laws of Circular Dielectric Elastomer Membrane Actuators

Stefan Seelecke, Alexander York, Gianluca Rizzello, 2018, Journal of Mechanical Design.

BATMAV: a biologically inspired micro air vehicle for flapping flight: kinematic modeling

Stefan Seelecke, Gheorghe Bunget, S. Seelecke, 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Nonlinear multi-scale dynamics modeling of piezoceramic energy harvesters with ferroelectric and ferroelastic hysteresis

G. Acciani, G. Rizzello, S. Seelecke, 2020, Nonlinear Dynamics.

A unified framework for modeling hysteresis in ferroic materials

Stefan Seelecke, Marcelo J. Dapino, Zoubeida Ounaies, 2006 .

Finite element analysis of SMA beam bending using COMSOL

Stefan Seelecke, Qifu Li, Shibin Yang, 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Scientific test setup for investigation of shape memory alloy based elastocaloric cooling processes

Stefan Seelecke, Andreas Schütze, Marvin Schmidt, 2015 .

Design and Control of a High-Speed Positioning System Based on Dielectric Elastomer Membrane Actuators

Micah Hodgins, Stefan Seelecke, Alexander York, 2017, IEEE/ASME Transactions on Mechatronics.

Reinforcement Learning-Based Minimum Energy Position Control of Dielectric Elastomer Actuators

Stefan Seelecke, Gianluca Rizzello, David Naso, 2021, IEEE Transactions on Control Systems Technology.

Modeling and Analysis of SMA-Based Adaptive Structures

Stefan Seelecke, Shibin Yang, S. Seelecke, 2008 .

Thermodynamic aspects of shape memory alloys

Stefan Seelecke, Ingo Müller, S. Seelecke, 2001 .

Development of a meso-scale thermo-magneto-mechanical free energy model for NiMnGa

Stefan Seelecke, Manfred Kohl, Phillip Morrison, 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Free energy model for piezoceramic materials

Stefan Seelecke, Ralph C. Smith, Zoubeida Ounaies, 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Energy formulation for Preisach models

Stefan Seelecke, Ralph C. Smith, Ralph C. Smith, 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Measurement and Prediction of the Thermomechanical Response of Shape Memory Alloy Hybrid Composite Beams

Stefan Seelecke, Travis L. Turner, Brian F. Davis, 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Simulation and control of SMA actuators

Stefan Seelecke, Norbert Papenfuss, S. Seelecke, 1999, Smart Structures.

A coupled thermomechanical model for shape memory alloys—From single crystal to polycrystal

Stefan Seelecke, Olaf Heintze, S. Seelecke, 2008 .

A Free Energy Model for the Inner Loop Behavior of Pseudoelastic Shape Memory Alloys

S. Seelecke, O. Heintze, 2005 .

Computational mechanics of Nitinol stent grafts.

C. Kleinstreuer, S. Seelecke, C. Kleinstreuer, 2008, Journal of biomechanics.

Correlative digital image correlation and infrared thermography measurements for the investigation of the mesoscopic deformation behaviour of foams

S. Seelecke, C. Jochum, S. Diebels, 2019, Journal of the Mechanics and Physics of Solids.

Finite element simulation of plane strain dielectric elastomer membranes actuated by discretized electrodes

Stefan Seelecke, Gianluca Rizzello, Philipp Loew, 2019, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Design, Manufacturing, and Characterization of Thin, Core-Free, Rolled Dielectric Elastomer Actuators

G. Rizzello, S. Seelecke, Bettina Fasolt, 2021, Actuators.

A Multi‐Mode, Multi‐Frequency Dielectric Elastomer Actuator

G. Moretti, M. Fontana, G. Rizzello, 2022, Advanced Functional Materials.

Design and fabrication of silicone-based dielectric elastomer rolled actuators for soft robotic applications

Stefan Seelecke, Gianluca Rizzello, Paul Motzki, 2020, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Design and validation of a dielectric elastomer membrane actuator driven pneumatic pump

Stefan Seelecke, Gianluca Rizzello, Philipp Linnebach, 2020, Smart Materials and Structures.

Towards Sensorless Soft Robotics: Self-Sensing Stiffness Control of Dielectric Elastomer Actuators

Stefan Seelecke, Gianluca Rizzello, David Naso, 2020, IEEE Transactions on Robotics.

Dielectric Elastomer Cooperative Microactuator Systems—DECMAS

G. Rizzello, S. Seelecke, G. Schultes, 2023, Actuators.

An audio-tactile interface based on dielectric elastomer actuators

G. Moretti, G. Rizzello, S. Seelecke, 2023, Smart materials and structures (Print).

Modeling of the effects of the electrical dynamics on the electromechanical response of a DEAP circular actuator with a mass–spring load

Micah Hodgins, Stefan Seelecke, Alexander York, 2015 .

A novel biasing mechanism for circular out-of-plane dielectric actuators based on permanent magnets

Stefan Seelecke, Gianluca Rizzello, Philipp Loew, 2018, Mechatronics.

Performance prediction of circular dielectric electro-active polymers membrane actuators with various geometries

Stefan Seelecke, Alexander York, Steffen Hau, 2015, Smart Structures.

Modeling and experimental validation of thin, tightly rolled dielectric elastomer actuators

G. Moretti, G. Rizzello, S. Seelecke, 2021, Smart Materials and Structures.

Silicone based dielectric elastomer strip actuators coupled with nonlinear biasing elements for large actuation strains

Stefan Seelecke, Gianluca Rizzello, Steffen Hau, 2018, Smart Materials and Structures.

Laser Structuring of Thin Metal Films of Compliant Electrodes on Dielectric Elastomers

G. Rizzello, S. Seelecke, G. Schultes, 2023, Advanced Functional Materials.

Distributed Electro-Mechanical Coupling Effects in a Dielectric Elastomer Membrane Array

G. Rizzello, S. Seelecke, G. Schultes, 2022, Experimental Mechanics.

Finite element modeling and parameter study of a fully-polymeric array of coupled dielectric elastomers

G. Rizzello, S. Seelecke, G. Schultes, 2022, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Experimental characterization of the mechanical coupling in a DE-array

G. Rizzello, S. Seelecke, G. Schultes, 2022, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Finite Element Modeling and Simulation of a Soft Array of Dielectric Elastomer Actuators

G. Moretti, G. Rizzello, S. Seelecke, 2021 .

Model-Based Design Optimization of Soft Polymeric Domes Used as Nonlinear Biasing Systems for Dielectric Elastomer Actuators

Stefan Seelecke, Gianluca Rizzello, Sipontina Croce, 2021, Actuators.

Fully Polymeric Domes as High-Stroke Biasing System for Soft Dielectric Elastomer Actuators

Stefan Seelecke, Gianluca Rizzello, Günter Schultes, 2021, Frontiers in Robotics and AI.

Characterization and modeling of an array of dielectric elastomer taxels

Stefan Seelecke, Gianluca Rizzello, Sipontina Croce, 2021, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Modeling and simulation of an array of Dielectric Elestomeric Actuator Membranes

G. Rizzello, S. Seelecke, G. Schultes, 2020 .

Assembly and characterization of a DE-actuator based on polymeric domes as biasing element

G. Rizzello, S. Seelecke, G. Schultes, 2020 .

A Self-Sensing Approach for Dielectric Elastomer Actuators Based on Online Estimation Algorithms

Stefan Seelecke, Alexander York, Gianluca Rizzello, 2017, IEEE/ASME Transactions on Mechatronics.

Robust Position Control of Dielectric Elastomer Actuators Based on LMI Optimization

Stefan Seelecke, Gianluca Rizzello, David Naso, 2016, IEEE Transactions on Control Systems Technology.

Modeling and experimental characterization of the stress, strain, and resistance of shape memory alloy actuator wires with controlled power input

Stefan Seelecke, Stephen J. Furst, S. Seelecke, 2012 .

Modeling the dynamic behavior of shape memory alloys

Stefan Seelecke, S. Seelecke, 2002 .

Design and Validation of a Reconfigurable Robotic End-Effector Based on Shape Memory Alloys

Stefan Seelecke, Paul Motzki, Frank Khelfa, 2019, IEEE/ASME Transactions on Mechatronics.

Simultaneous Self-Sensing of Displacement and Force for Soft Dielectric Elastomer Actuators

Stefan Seelecke, Gianluca Rizzello, David Naso, 2018, IEEE Robotics and Automation Letters.

Design and fabrication of a bat-inspired flapping-flight platform using shape memory alloy muscles and joints

Stefan Seelecke, Stephen J. Furst, George Bunget, 2012 .

Shape Memory Alloys in Continuum and Soft Robotic Applications

Stefan Seelecke, Roland Werthschützky, Mario Kupnik, 2019, ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems.

Modeling, Identification, and Control of a Dielectric Electro-Active Polymer Positioning System

Stefan Seelecke, Alexander York, Gianluca Rizzello, 2015, IEEE Transactions on Control Systems Technology.

Continuum electro-mechanical damage modelling for dielectric elastomer

Stefan Seelecke, Rocco Vertechy, Marco Fontana, 2019, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

A Soft Five-Fingered Hand Actuated by Shape Memory Alloy Wires: Design, Manufacturing, and Evaluation

Stefan Seelecke, Gianluca Rizzello, Filomena Simone, 2020, Frontiers in Robotics and AI.

Development, manufacturing, and validation of a dielectric elastomer membrane actuator–driven contactor

Stefan Seelecke, Gianluca Rizzello, Filomena Simone, 2018, Journal of Intelligent Material Systems and Structures.

Elastocaloric cooling: From fundamental thermodynamics to solid state air conditioning

A. Schütze, S. Seelecke, Marvin Schmidt, 2016 .

High-performance elastocaloric materials for the engineering of bulk- and micro-cooling devices

S. Seelecke, G. Eggeler, M. Kohl, 2018 .

A finite element framework for a shape memory alloy actuated finger

Stefan Seelecke, Gianluca Rizzello, Filomena Simone, 2019, Journal of Intelligent Material Systems and Structures.

Industrial Applications for Shape Memory Alloys

S. Seelecke, P. Motzki, 2019, Reference Module in Materials Science and Materials Engineering.

Modeling and Design Optimization of a Rotational Soft Robotic System Driven by Double Cone Dielectric Elastomer Actuators

Stefan Seelecke, Gianluca Rizzello, David Naso, 2020, Frontiers in Robotics and AI.

Effects of Electrode Materials and Compositions on the Resistance Behavior of Dielectric Elastomer Transducers

G. Rizzello, S. Seelecke, Bettina Fasolt, 2023, Polymers.

Experimental Methods for Investigation of Shape Memory Based Elastocaloric Cooling Processes and Model Validation.

A. Schütze, S. Seelecke, G. Eggeler, 2016, Journal of visualized experiments : JoVE.

Continuous Operating Elastocaloric Heating and Cooling Device: Model-Based Parameter Study With Airflow Losses

A. Schütze, S. Seelecke, P. Motzki, 2019, ASME 2019 Conference on Smart Materials, Adaptive Structures and Intelligent Systems.

On the widths of the hysteresis of mechanically and thermally induced martensitic transformations in Ni–Ti-based shape memory alloys

A. Schütze, S. Seelecke, G. Eggeler, 2015 .

Experimental Investigation on the Efficiency of a Control Dependent NiTi-Based Cooling Process

Stefan Seelecke, Andreas Schütze, Marvin Schmidt, 2014 .

DEVELOPMENT OF A SHAPE MEMORY BASED AIR CONDITIONING SYSTEM

S. Seelecke, Marvin Schmidt, Susanne-Marie Kirsch, 2017 .

Numerical simulation and experimental investigation of the elastocaloric cooling effect in sputter-deposited TiNiCuCo thin films

S. Seelecke, M. Schmidt, H. Ossmer, 2017, Continuum Mechanics and Thermodynamics.

Experimental Investigation and Numerical Simulation of the Mechanical and Thermal Behavior of a Superelastic Shape Memory Alloy Beam During Bending

A. Schütze, S. Seelecke, G. Eggeler, 2014 .

Cooling Efficiencies of a NiTi-Based Cooling Process

A. Schütze, S. Seelecke, Marvin Schmidt, 2013 .

Thermodynamic modeling and simulation of cavitating nozzle flow

Stefan Seelecke, C. Vortmann, S. Seelecke, 2003 .

Hysteresis modeling in thermal shape memory alloy wire actuators: an irreversible port-Hamiltonian approach

Stefan Seelecke, Gianluca Rizzello, David Naso, 2019, 2019 IEEE 58th Conference on Decision and Control (CDC).

Quasiplasticity and pseudoelasticity in shape memory alloys

S. Seelecke, I. Müller, Y. Huo, 1994 .

Editorial: Soft Robotics Based on Electroactive Polymers

Stefan Seelecke, Herbert Shea, Gianluca Rizzello, 2021, Frontiers in Robotics and AI.

Computational mechanics of Nitinol stent grafts.

S. Seelecke, C. Kleinstreuer, Z. Li, 2008, Journal of biomechanics.

Soft robotic tentacle arm element actuated by rolled dielectric elastomer artificial muscles

S. Seelecke, M. Baltes, J. Kunze, 2022, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Soft robotic module actuated by silicone-based rolled dielectric elastomer actuators: modeling and simulation

Stefan Seelecke, Gianluca Rizzello, Sophie Nalbach, 2020, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Multifunctional fatigue testing setup for in-plane operating DEAs

Stefan Seelecke, Gianluca Rizzello, Paul Motzki, 2020, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Quantification of the Effectiveness of Various Adhesives in Holding an SMA Actuator Wire During Joule Heating

Stefan Seelecke, Stephen J. Furst, S. Seelecke, 2013 .

Experimental study of the electro-mechanical switching behavior of a piezoelectric stack actuator

Stefan Seelecke, Alexander York, A. York, 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.