D. Rees

发表

Appendix C: Plate Buckling Under Biaxial Compression and Shear

D. Rees, 2009 .

Basic Engineering Plasticity: An Introduction with Engineering and Manufacturing Applications

D. Rees, 2006 .

Mechanics Of Solids And Structures

D. Rees, 1990 .

The heating effect of electrical resistance strain gauges applied to low thermal conductivity materials

D. Rees, Tao Zhang, John P. Evans, 1992 .

A Theory of Non-Linear Anisotropic Hardening

D. Rees, 1983 .

Stress concentrations arising from a slot in a plate under biaxial stress

D. Rees, 1997 .

Development of Statistical Fatigue Failure Characteristics of 0.125-Inch 2024-T3 Aluminum Under Simulated Flight-by-Flight Loading

D. Rees, J. P. Butler, 1974 .

Cyclic plasticity, creep and fracture in a Nimonic alloy

D. Rees, 1998 .

Deformation and fracture behaviour under combined creep and fatigue

D. Rees, B. Dyson, 1986 .

Bonding Mechanisms and Strength of Steel Fiber–Reinforced Cementitious Composites: Overview

D. Rees, M. Fan, S. Abdallah, 2018 .

CHAPTER 14 – PRODUCTION PROCESSES

D. Rees, 2006 .

CHAPTER 7 – LIMIT ANALYSIS

D. Rees, 2006 .

Predicting pull-out behaviour of 4D/5D hooked end fibres embedded in normal-high strength concrete

D. Rees, M. Fan, S. Abdallah, 2018, Engineering Structures.

Mechanics of Optimal Structural Design: Minimum Weight Structures

David W. A. Rees, D. Rees, 2009 .

General Stiffness Matrix for a Thin-Walled, Open-Section Beam Structure

D. Rees, Abdelraouf M. Sami Alsheikh, 2021, World Journal of Mechanics.

Forming limits in a clad steel

D. Rees, R. Power, 1994 .

Materials analysis and image-based modelling of transmissibility and strain behaviour in approved face mask microstructures

D. Rees, A. Howkins, M. Rasekh, 2022, Scientific Reports.

A tensor function for the R-value of sheet metal

D. Rees, 1997 .

Life prediction techniques for combined creep and fatigue

David W. A. Rees, D. Rees, 1987 .

An examination of the neutral loading condition in plasticity theory

D. Rees, 1988 .

Deformation and fracture of metal matrix particulate composites under combined loadings

D. Rees, 1998 .

A Multi-Surface Representation of Anisotropic Hardening and Comparisons with Experiment

D. Rees, 1984 .

Anisotropic hardening theory and the Bauschinger effect

D. Rees, 1981 .

The creep behaviour of alloy 800H under tension and torsion

D. Rees, 1985 .

Factors influencing the FLD of automotive sheet metal

D. Rees, 2001 .

Plane strain compression of aluminium alloy sheets

D. Rees, 2012 .

Applications of classical plasticity theory to non-radial loading paths

D. Rees, 1987, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

Requirements for Thin-walled Torsion Testing

D. Rees, 1986 .

Analysis and modelling of mechanical anchorage of 4D/5D hooked end steel fibres

Mizi Fan, David W. A. Rees, Sadoon Abdallah, 2016 .

Bending and Shear

D. Rees, 1997 .

An examination of yield surface distortion and translation

D. Rees, 1984 .

An experimental appraisal of the equi-strain multi-surface hardening model

D. Rees, 1987 .

A hardening model for anisotropic materials

D. Rees, 1981 .

Yield functions that account for the effects of initial and subsequent plastic anisotropy

D. Rees, 1982 .

A review of stress-strain paths and constitutive relations in the plastic range

D. Rees, 1981 .

Elastic-plastic stresses in rotating discs by von Mises and Tresca

David W. A. Rees, D. Rees, 1999 .

Descriptions of reversed yielding in bending

D. Rees, 2007 .

Room-temperature r.f. magnetron sputtered ZnO for electromechanical devices

D. Rees, A. Barker, S. Crowther, 1997 .

CHAPTER 6 – SLIP LINE FIELDS

D. Rees, 2006 .

CHAPTER 11 – ORTHOTROPIC PLASTICITY

D. Rees, 2006 .

CHAPTER 10 – PLASTICITY WITH HARDENING

D. Rees, 2006 .

The sensitivity of strain gauges when used in the plastic range

David W. A. Rees, D. Rees, 1986 .

On isotropy and anisotropy in the theory of plasticity

D. Rees, 1982, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

Understanding the effects of hooked-end steel fibre geometry on the uniaxial tensile behaviour of self-compacting concrete

Mizi Fan, Seyed Hamidreza Ghaffar, Sadoon Abdallah, 2018, Construction and Building Materials.

Effect of elevated temperature on pull-out behaviour of 4DH/5DH hooked end steel fibres

D. Rees, M. Fan, Sadoon Abdallah, 2017 .

Exploration of Statistical Fatigue Failure Characteristics of 0.063-Inch Mill-Annealed Ti-6Al-4V Sheet and 0.050-Inch Heat-Treated 17-7PH Steel Sheet Under Simulated Flight-By-Flight Loading.

D. Rees, J. P. Butler, 1975 .

Stress Concentrations for Slotted Plates in Bi-Axial Stress

D. Rees, S. T. Bahai, 2012 .

The Mechanics of Engineering Structures

D. Rees, 2014 .

CHAPTER 8 – CRYSTAL PLASTICITY

D. Rees, 2006 .

Sheet orientation and forming limits under diffuse necking

D. Rees, 1996 .

Equivalence and instability correlations for isotropic and anisotropic sheet plasticity

D. Rees, 1994 .

Macroscopic Characterisation of Failure in Composites Materials

D. Rees, C. Stolworthy, 1995 .

Appendix B: Plate Buckling Under Uniaxial Compression

D. Rees, 2009 .

Plastic flow in the elliptical bulge test

David W. A. Rees, D. Rees, 1995 .

Fatigue crack growth in thick-walled cylinders under pulsating internal pressure

David W. A. Rees, D. Rees, 1989 .

Autofrettage theory and fatigue life of open-ended cylinders

David W. A. Rees, D. Rees, 1990 .

A bounding method for predicting the fatigue life of plain and autofrettaged thick-walled cylinders

D. Rees, 1991 .

THE FATIGUE LIFE OF THICK‐WALLED AUTOFRETTAGED CYLINDERS WITH CLOSED ENDS

D. Rees, 1991 .

Predicting Fatigue Failures in Thick-Walled Cylinders Under Pulsating Internal Pressure

D. Rees, 1990 .

A Code of Practice for Torsional Creep Testing of Tubular Testpieces at Elevated Temperatures

D. Rees, M. Brown, T. Hyde, 1992 .

Autofrettage of thick-walled pipe bends

D. Rees, 2004 .