D. Mahajan

发表

A scheme to combine molecular dynamics and dislocation dynamics

S. Brinckmann, D. Mahajan, A. Hartmaier, 2012 .

Crystal Orientation Effect on SIF in Single Crystals: A Study Based on Coupled Framework of XFEM and Crystal Plasticity Model

D. Mahajan, Rajwinder Singh, 2018 .

Characterization and Slurry Erosion Mechanisms of Nickel-Based Cermet Coatings on Monel K-500

H. Singh, D. Mahajan, A. Ang, 2021, Journal of Thermal Spray Technology.

Hydrogen assisted crack initiation in metals under monotonic loading: A new experimental approach

H. Singh, D. Mahajan, Rakesh Kumar, 2021 .

On the transition of fracture toughness in metallic materials with thickness: An atomistic viewpoint

D. Mahajan, Rajwinder Singh, 2020 .

Effect of Multi-Walled Carbon Nanotubes on DC Electrical Conductivity and Acetone Vapour Sensing Properties of Polypyrrole

D. Mahajan, A. Husain, 2022, Carbon Trends.

A carbon quantum dot and rhodamine-based ratiometric fluorescent complex for the recognition of histidine in aqueous systems

D. Mahajan, Narinder Singh, J. S. Sidhu, 2019, Materials Chemistry Frontiers.

A low-cost device for rapid ‘color to concentration’ quantification of cyanide in real samples using paper-based sensing chip

D. Mahajan, N. Kaur, Narinder Singh, 2020 .

Hydrogen distribution in metallic polycrystals with deformation

D. Mahajan, Rakesh Kumar, 2020 .

Void nucleation and disentanglement in glassy amorphous polymers.

S. Basu, D. Mahajan, Bhupinder Singh, 2010, Physical review. E, Statistical, nonlinear, and soft matter physics.

Hydrogen induced blister cracking and mechanical failure in X65 pipeline steels

D. Mahajan, Rajwinder Singh, Vishal Singh, 2019, International Journal of Hydrogen Energy.

In-situ investigations of hydrogen influenced crack initiation and propagation under tensile and low cycle fatigue loadings in RPV steel

D. Mahajan, Rajwinder Singh, Vishal Singh, 2020 .

Role of prior austenite grain boundaries in short fatigue crack growth in hydrogen charged RPV steel

D. Mahajan, Rajwinder Singh, P. Singh, 2019, International Journal of Pressure Vessels and Piping.

Hydrogen-assisted intergranular fatigue crack initiation in metals: Role of grain boundaries and triple junctions

D. Mahajan, R. Kumar, A. Arora, 2023, International Journal of Hydrogen Energy.

Coupled diffusion-mechanics framework for simulating hydrogen assisted deformation and failure behavior of metals

D. Mahajan, Y. Charles, V. Singh, 2022, International Journal of Plasticity.

Modelling of Fatigue Crack Initiation in Hydrogen Charged Polycrystalline Nickel

D. Mahajan, Rakesh Kumar, D. Meena, 2019, Procedia Structural Integrity.

Modelling of hydrogen-assisted damage at the deforming single crystal crack-tip

D. Mahajan, Rakesh Kumar, 2023, Mechanics of Materials.

Towards the prediction of intergranular fatigue crack initiation in metals due to hydrogen

H. Singh, D. Mahajan, A. Arora, 2020, Materials Science and Engineering: A.

In-situ Study of the Effect of Hydrogen on Fatigue Crack Initiation in Polycrystalline Nickel

D. Mahajan, Rakesh Kumar, A. Arora, 2019, Procedia Structural Integrity.

Cavitation erosion mechanisms of HVOF-sprayed Ni-based cermet coatings in 3.5% NaCl environment

D. Mahajan, A. Ang, N. Singh, 2022, Surface and Coatings Technology.

Corrosion Behaviour of Laser Textured and Wccocr+Gnps Coated Is-2062 Steel

D. Mahajan, R. Verma, Vijay Kumar, 2023, SSRN Electronic Journal.

Effect of stable stacking fault energy and crystal orientation on fracture behaviour of thin metallic single crystals

D. Mahajan, Rajwinder Singh, 2021 .

ON THE SIMULATION OF UNIAXIAL, COMPRESSIVE BEHAVIOR OF AMORPHOUS, GLASSY POLYMERS WITH MOLECULAR DYNAMICS

S. Basu, D. Mahajan, 2010 .

Ageing and rejuvenation in glassy amorphous polymers

S. Basu, D. Mahajan, R. Estevez, 2010 .

Investigations into the applicability of rubber elastic analogy to hardening in glassy polymers

S. Basu, D. Mahajan, 2010 .

Micromechanics of the growth of a craze fibril in glassy polymers

S. Basu, D. Mahajan, V. Giessen, 2005 .

Mechanisms of crazing in glassy polymers revealed by molecular dynamics simulations.

D. Mahajan, A. Hartmaier, 2012, Physical review. E, Statistical, nonlinear, and soft matter physics.

Designing sulfonated polyimide-based fuel cell polymer electrolyte membranes using machine learning approaches

N. C. Krishnan, D. Mahajan, Narinder Singh, 2023, Computational Materials Science.

Effect of microstructural features on short fatigue crack growth behaviour in SA508 Grade 3 Class I low alloy steel

D. Mahajan, Rajwinder Singh, P. Singh, 2020 .

An Experimentally Informed Computational Framework for Investigating the Role of Surface Roughness on High Cycle Fatigue Life of LPBF IN718

D. Mahajan, D. Srinivasan, Sandeep Kumar, 2023, Transactions of Indian National Academy of Engineering.

Cavitation erosion resistant nickel-based cermet coatings for monel K-500

H. Singh, D. Mahajan, A. Ang, 2021, Tribology International.

Effect of hydrogen on short crack propagation in SA508 Grade 3 Class I low alloy steel under cyclic loading

D. Mahajan, Rajwinder Singh, Aman Singh, 2019, Procedia Structural Integrity.

Atomistic simulation and synthesis of novel sulfonated Polyimide polymer electrolyte membranes with facile proton transport

D. Mahajan, A. Husain, Narinder Singh, 2023, Chemical Engineering Journal.

Role of stress triaxiality on ductile versus brittle fracture in pre-cracked FCC single crystals: an atomistic study

D. Mahajan, Rajwinder Singh, 2019, Modelling and Simulation in Materials Science and Engineering.

On the transition of short cracks into long fatigue cracks in reactor pressure vessel steels

R. Singh, D. Mahajan, A. Arora, 2018 .

On the role of vacancy-hydrogen complexes on dislocation nucleation and propagation in metals

D. Mahajan, A. Arora, I. Adlakha, 2023, SSRN Electronic Journal.