P. Prevéy

发表

Improved Fatigue Performance of Friction Stir Welds with Low Plasticity Burnishing: Residual Stress Design and Fatigue Performance Assessment

P. Prevéy, M. Mahoney, 2003 .

Improving Corrosion Fatigue Performance of AA2219 Friction Stir Welds with Low Plasticity Burnishing

P. Prevéy, D. Hornbach, P. Mason, 2002 .

The Effect of Cold Work on the Thermal Stability of Residual Compression in Surface Enhanced IN718

P. Prevéy, 2000 .

Thermal Residual Stress Relaxation and Distortion in Surface Enhanced Gas Turbine Engine Components

P. Prevéy, P. Mason, D. Hombach, 1998 .

X-RAY DIFFRACTION CHARACTERIZATION OF RESIDUAL STRESSES PRODUCED BY SHOT PEENING

P. Prevéy, 1990 .

Fatigue Strength Restoration in Corrosion Pitted 4340 Alloy Steel Via Low Plasticity Burnishing

P. Prevéy, J. Cammett, 2006 .

FOD RESISTANCE AND FATIGUE CRACK ARREST IN LOW PLASTICITY BURNISHED IN718

Paul S. Prevéy, Timothy P. Gabb, P. Prevéy, 2000 .

A Comparison of X-Ray Diffraction Residual Stress Measurement Methods on Machined Surfaces

P. Prevéy, 1975 .

Incorporation of Residual Stresses in the Fatigue Performance Design of Ti-6AI-4V

P. Prevéy, N. Jayaraman, R. Ravindranath, 2004 .

The Effect of Prior Cold Work on Tensile Residual Stress Development in Nuclear Weldments

Douglas J. Hornbach, Paul S. Prevéy, P. Prevéy, 2002 .

Effects of Surface Treatment on Fretting Fatigue Performance of Ti-6Al-4V

P. Prevéy, M. Shepard, N. Jayaraman, 2004 .

Improved Damage Tolerance in Titanium Alloy Fan Blades with Low Plasticity Burnishing

T. L. Jacobs, P. Prevéy, D. Hornbach, 2002 .

Restoring Fatigue Performance of Corrosion Damaged Aa7075-T6 and Fretting in 4340 Steel with Low Plasticity Burnishing

P. Prevéy, J. Cammett, 2002 .

FATIGUE LIFE IMPROVEMENT OF AN ALUMINUM ALLOY FSW WITH LOW PLASTICITY BURNISHING

P. Prevéy, M. Mahoney, N. Jayaraman, 2003 .

Introduction of Residual Stresses to Enhance Fatigue Performance in the Initial Design

P. Prevéy, N. Jayaraman, R. Ravindranath, 2004 .

X-ray diffraction characterization of crystallinity and phase composition in plasma-sprayed hydroxyapatite coatings

P. Prevéy, 2000 .

SURFACE RESIDUAL STRESS DISTRIBUTIONS IN AS-BENT INCONEL 600 U-BEND AND INCOLOY 800 90-DEGREE BEND TUBING SAMPLES

P. Prevéy, 1981 .

Application of Low Plasticity Burnishing (LPB) to Improve the Fatigue Performance of Ti-6Al-4V Femoral Hip Stems

Douglas J. Hornbach, Paul S. Prevéy, P. Prevéy, 2006 .

X-RAY DIFFRACTION CHARACTERIZATION OF CRYSTALLINITY AND PHASE COMPOSITION IN PLASMA-SPRAYED HYDROXYLAPATITE COATINGS

P. Prevéy, 2000 .

Residual Stress in Pipelines

Douglas J. Hornbach, Paul S. Prevey, P. Prevéy, 2015 .

NACE CORROSION 2011 STG 32 - Advances in Materials for Oil & Gas Production Mitigation of Sulfide Stress Cracking in Down Hole P110 Components via Low Plasticity Burnishing

P. Prevéy, D. Hornbach, J. Scheel, 2011 .

An Investigation of the Formation of Crack-Like Intergranular Fissures in 7000 Series Aluminum by Grain Boundary Galvanic Corrosion

P. Prevéy, D. Hornbach, N. Jayaraman, 2021, Journal of Failure Analysis and Prevention.

Effect of power density and pulse repetition on laser shock peening of Ti-6Al-4V

P. Prevéy, A. Clauer, Paul R. Smith, 2000 .

THE EFFECT OF SHOT PEENING COVERAGE ON RESIDUAL STRESS, COLD WORK, AND FATIGUE IN A NICKEL-BASE SUPERALLOY

N. Jayaraman, John T. Cammett, P. Prevéy, 2005 .

X-RAY DIFFRACTION RESIDUAL STRESS TECHNIQUES

Paul S. Prevéy, P. Prevéy, 1986 .

Mitigation of Stress Corrosion Cracking in Nuclear Weldments Using Low Plasticity Burnishing

P. Prevéy, D. Hornbach, J. Scheel, 2008 .

Mitigation of Stress Corrosion Cracking Using an Engineered Residual Stress Solution

P. Prevéy, D. Hornbach, J. Scheel, 2011 .

Management of Residual Stress : An Emerging Technology For Oil Industry Tubular Products

P. Prevéy, D. Hombach, J. Scheel, 2011 .

The Effect of Cold Work on the Thermal Stability of Residual Compression in Surface Enhanced IN 718

P. Prevéy, 2007 .

COMPARISON OF MECHANICAL SUPPRESSION BY SHOT PEENING AND LOW PLASTICITY BURNISHING TO MITIGATE SCC AND CORROSION FATIGUE FAILURES IN 300M LANDING GEAR STEEL

P. Prevéy, M. Shepard, R. Ware, 2005 .

A Design Methodology to Take Credit for Residual Stresses in Fatigue Limited Designs

N. Jayaraman, P. Prevéy, P. Prevéy, 2005 .

Mechanical Suppression of SCC and Corrosion Fatigue Failures in 300M Steel Landing Gear

P. Prevéy, M. Shepard, R. Ware, 2004 .

TENSILE RESIDUAL STRESS FIELDS PRODUCED IN AUSTENITIC ALLOY WELDMENTS

P. Prevéy, D. Hornbach, 1997 .

Effect of prior machining deformation on the development of tensile residual stresses in weld-fabricated nuclear components

P. Prevéy, D. Hornbach, P. Mason, 1996 .

CURRENT APPLICATIONS OF X-RAY DIFFRACTION RESIDUAL STRESS MEASUREMENT

Paul S. Prevéy, P. Prevéy, 1996 .

PROBLEMS WITH NON-DESTRUCTIVE SURFACE X-RAY DIFFRACTION RESIDUAL STRESS MEASUREMENT

P. Prevéy, 1991 .

A METHOD OF DETERMINING THE ELASTIC PROPERTIES OF ALLOYS IN SELECTED CRYSTALLOGRAPHIC DIRECTIONS FOR X-RAY DIFFRACTION RESIDUAL STRESS MEASUREMENT

Paul S. Prevéy, P. Prevéy, 1976 .

Case Studies of Fatigue Life Improvement Using Low Plasticity Burnishing in Gas Turbine Engine Applications

Paul S. Prevéy, Ravi A. Ravindranath, Michael Shepard, 2006 .

The Influence of Surface Enhancement by Low Plasticity Burnishing on the Corrosion Fatigue Performance of AA7075-T6

John T. Cammett, Paul S. Prevéy, P. Prevéy, 2004 .

Iterative taguchi analysis: Optimizing the austenite content and hardness in 52100 steel

P. Prevéy, P. Mason, P. W. Mason, 2001 .

The Effect of Shot Peening Coverage on Residual Stress, Cold Work and Fatigue in a Ni-Cr-Mo Low Alloy Steel

P. Prevéy, J. Cammett, 2000 .

The Effect of Low Plasticity Burnishing (LPB) on the HCF Performance and FOD Resistance of Ti-6AI-4V

Paul S. Prevéy, P. Prevéy, Paul R. Smith, 2001 .

Controlled Plasticity Burnishing to Improve the Performance of Friction Stir Processed Ni-Al Bronze

P. Prevéy, D. Hornbach, N. Jayaraman, 2007 .

Mitigation of Fretting Fatigue Damage in Blade and Disk Pressure Faces With Low Plasticity Burnishing

N. Jayaraman, Paul S. Prevéy, Ravi A. Ravindranath, 2010 .

THE USE OF PEARSON VII DISTRIBUTION FUNCTIONS IN X-RAY DIFFRACTION RESIDUAL STRESS MEASUREMENT

Paul S. Prevéy, P. Prevéy, 1985 .

Design Credit for Compressive Residual Stresses in Turbine Engine Components

N. Jayaraman, Ravi A. Ravindranath, Paul S. Prevey, 2005 .

Overview of Low Plasticity Burnishing for Mitigation of Fatigue Damage Mechanisms

N. Jayaraman, John T. Cammett, Paul S. Prevéy, 2005 .

X-RAY DIFFRACTION CHARACTERIZATION OF THE RESIDUAL STRESS AND HARDNESS DISTRIBUTIONS IN INDUCTION HARDENED GEARS

P. Prevéy, D. Hornbach, P. Mason, 1995 .

Safe Life Conversion of Aircraft Aluminum Structures via Low Plasticity Burnishing for Mitigation of Corrosion Related Failures

Douglas J. Hornbach, Paul S. Prevey, P. Prevéy, 2009 .

Application of Low Plasticity Burnishing to Improve Damage Tolerance of a Ti-6Al-4V First Stage Fan Blades

P. Prevéy, D. Hornbach, J. Cammett, 2003 .

THE MEASUREMENT OF SUBSURFACE RESIDUAL STRESS AND COLD WORK DISTRIBUTIONS IN NICKEL BASE ALLOYS

P. Prevéy, 1987 .

Development of Machining Procedures to Minimize Distortion During Manufacture

P. Prevéy, D. Hornbach, 1999 .