N. Park

发表

Ring-rolling design for a large-scale ring product of Ti-6Al-4V alloy

Chun‐Sing Lee, J. Yeom, J. Kim, 2007 .

Investigation of Flow Instability in High Temperature Deformation of INCONEL Alloy 783 Using Processing Map Approach

Chun‐Sing Lee, J. Yeom, J. Kim, 2008 .

Characterization of deformation stability in hot forging of conventional Ti–6Al–4V using processing maps

Jong-Taek Yeom, Nho-Kwang Park, Young Sang Na, 2002 .

Study of Forming Limit for Rotational Incremental Sheet Forming of Magnesium Alloy Sheet

Young-Suk Kim, Jingee Park, Nho-Kwang Park, 2009 .

Low-cycle fatigue life prediction for Waspaloy

J. Yeom, N. Park, S. Williams, 2002 .

Effect of Sintering Temperature on Microstructure and Mechanical Properties for the Spark Plasma Sintered Titanium from CP-Ti Powders

N. Park, Jae-Keun Hong, M. Jang, 2010 .

Influence of Initial Microstructure on Hot Workability of Ti-6Al-4V Alloy

Chun‐Sing Lee, J. Yeom, J. Kim, 2009 .

Quantification of the minor precipitates in UDIMET™ alloy720(LI) using electrolytic extraction and X-ray diffraction 1 UDIMET™ is a registered trade mark of Special Metal Corporation. 1

M. P. Jackson, N. Park, R. Reed, 1998 .

Effect of particle size distribution on microstructure and mechanical properties of spark-plasma-sintered titanium from CP-Ti powders

N. Park, Jae-Keun Hong, M. Oh, 2014, International Journal of Precision Engineering and Manufacturing.

Effects of various sintering methods on microstructure and mechanical properties of CP-Ti powder consolidations

N. Park, Jae-Keun Hong, Jong-Moon Park, 2014 .

Unified viscoplastic models for low cycle fatique behavior of Waspaloy

J. Yeom, N. Park, S. Williams, 2001 .

Effect of Crystalline Phase on Dynamic Deformation Properties of Zr-Based BMG Alloys

J. Kim, N. Park, Sunghak Lee, 2007 .

Sigma morphology and precipitation mechanism in Udimet 720Li

N. Park, R. Reed, Y. Na, 2000 .

Electron backscatter diffraction analysis of dynamically recrystallized grain structures in a Ni-Cr-Fe base alloy

J. Yeom, N. Park, Jai-Young Lee, 2006 .

CHARACTERISTICS OF VIM/VAR-PROCESSED ALLOY 718 INGOT AND THE EVOLUTION OF MICROSTRUCTURE DURING COGGING -

J. Yeom, N. Park, J. H. Kim, 2005 .

Characteristics of Powder-Rolled and Sintered Sheets Made from HDH Ti Powders

J. Kim, N. Park, Jae-Keun Hong, 2012 .

Finite-element analysis of microstructure evolution in the cogging of an Alloy 718 ingot

Chun-Sing Lee, Nho-Kwang Park, Chun‐Sing Lee, 2007 .

Microstructure prediction of two-phase titanium alloy during hot forging using artificial neural networks and FE simulation

J. Yeom, J. Kim, N. Park, 2009 .

Artificial neural network modeling of phase volume fraction of Ti alloy under isothermal and non-isothermal hot forging conditions

J. Yeom, N. Park, N. Reddy, 2007 .

Prediction of Microstructure During High Temperature Forming of Ti-6Al-4V Alloy

J. Yeom, N. Park, You Hwan Lee, 2004 .

Characterization of the interface heat transfer coefficient during non-isothermal bulk forming of Ti–6Al–4 V alloy

C. S. Lee, Chun‐Sing Lee, J. Yeom, 2011 .

Characterization of Dynamic Globularization Behavior during Hot Working of Ti-6Al-4V Alloy

Chun‐Sing Lee, J. Yeom, J. Kim, 2007 .

An Improved Process Design for the Hot Backward Extrusion of Ti-6Al-4V Tubes Using a Finite Element Method and Continuum Instability Criterion

Tae Jin Shin, Chun-Sing Lee, Jong Taek Yeom, 2007 .

Oxidation behavior of Alloy 718 at a high temperature

N. Park, L. Geng, Y. Na, 2007 .

Effect of Grain Size on the Deformation Behaviour of Nickel and Nickel Alloy Sheet

N. Park, B. Parker, 1985 .

Effect of Cr and Nb on the phase transformation and pore formation of Ti-Al base alloys

N. Park, S. Kayani, 2017 .

Pore formation mechanism and intermetallic phase transformation in Ti-Al alloy during reactive sintering

N. Park, Young-Hee Cho, K. Euh, 2022, Journal of Materials Research and Technology.

The Effect of Process Variables on Mechanical Properties and Formability in GTA Welds of Commercial Pure Titanium Sheet

J. Yeom, N. Park, Jae-Keun Hong, 2010 .

Effects of Impurity Elements on Green Strength of Powder Compacts

N. Park, B. Muddle, C. Bettles, 2010 .

Evaluation of High Temperature Workability of A350 LF2 Using the Deformation Processing Map

J. Yeom, N. Park, E. Jung, 2006 .

Hot forging of a nickel-base superalloy

J. Yeom, N. Park, Y. Na, 2001 .

Microstructures of Oxidized Primary Carbides on Superalloy Inconel 718

N. Park, C. Kang, Seong-Jun Kim, 2005 .

Precipitation behavior of hot-extruded alloy 718 during isothermal treatment

N. Park, L. Geng, Y. Na, 1999, Metals and Materials.

Continuous cooling transformation behavior of Alloy 718

N. Park, L. Geng, Y. Na, 1997 .

Microstructures and mechanical properties of Inconel 718 welds by CO2 laser welding

J. H. Park, Chung-Yun Kang, Nho-Kwang Park, 2008 .

Hot Forging Design of Titanium Compressor Wheel for a Marine Turbocharger

Y. S. Na, Jong-Taek Yeom, J. K. Hong, 2009 .

The development of the deformed microstructure in commercially pure nickel

N. Park, B. Parker, 1989 .

The effect of cold rolling, double aging and overaging processes on the tensile property and precipitation of AA2024 alloy

H. Jafarian, N. Park, S. H. Mousavi Anijdan, 2020, Journal of Materials Research and Technology.

Effect of scandium content on the hot extrusion of Al–Zn–Mg–(Sc) alloy

J. Yeom, J. Kim, N. Park, 2007 .

Estimation of Low Cycle Fatigue Life on the Accumulated Hysteresis Energy of Δσ·Δεp for Direct Aged Alloy 718 (Ni-Based Superalloys)

J. Yeom, N. Park, U. Paik, 2006 .

Continuum damage mechanics-based creep-fatigue-interacted life prediction of nickel-based superalloy at high temperature

Jong-Taek Yeom, Nho-Kwang Park, Tae-Won Kim, 2007 .

Simulation of microstructures for Alloy 718 blade forging using 3D FEM simulator

Jong-Taek Yeom, Nho-Kwang Park, Young Sang Na, 2003 .

Plastic Deformation Characteristics and Evaluation of Press Formability for Ti-6Al-4V Sheet at Warm Temperature

N. Park, J. G. Park, Young Suk Kim, 2010 .

Deformation modes of a Ni-base superalloy under compression

N. Park, Byung-Hoon Kim, Sang-Lae Lee, 1993 .

Process optimal design in non-isothermal backward extrusion of a titanium alloy by the finite element method

Sang Moo Hwang, S. S. Hong, S. H. Chung, 2005 .

Prediction of Microstructure Evolution in Hot Backward Extrusion of Ti-6Al-4V Alloy

J. Yeom, J. Kim, N. Park, 2012 .

FE Analysis of Microstructure Evolution during Ring Rolling Process of a Large-Scale Ti-6Al-4V Alloy Ring

Chun-Sing Lee, J. Yeom, J. Kim, 2010 .

Constitutive Analysis of the High-Temperature Deformation Behavior of Single Phase α-Ti and α+β Ti-6Al-4V Alloy

J. Yeom, J. Kim, N. Park, 2007 .

Microstructure and Mechanical Properties of Friction-Welded Alloy 718 and SNCRW Stainless Steel After Post-Weld Heat-Treatment

J. Kim, N. Park, Y. Kong, 2019, Journal of Welding and Joining.

Two Step Forging of Alloy 718

D. H. Kim, N. Park, Y. Na, 1997 .

The Effect of Post Weld Heat Treatment on Mechanical Properties of Friction-Welded Alloy 718 and SNCRW Stainless Steel

J. Yeom, J. Kim, N. Park, 2007 .

Ti STRIP PROPERTIES FABRICATED BY POWDER ROLLING METHOD

J. Yeom, J. Kim, N. Park, 2010 .

Characterization of deformation behavior for waspaloy under creep-fatigue interaction

J. Yeom, N. Park, Insoo Kim, 2000 .

Electron Beam Weld ability of Alloy 718 Nozzle for Jet Propulsion Component

C. H. Lee, J. Yeom, N. Park, 2008 .

Process Design of Profile Ring Rolling for Turbine Diaphragm Using FEM Simulation

Seung Sik Choi, Chun-Sing Lee, Jeoung Han Kim, 2007 .

Effect of scandium on the hot extrudability of 7075 aluminum alloy

J. Yeom, J. Kim, N. Park, 2010 .