Hyun-Chul Kim

发表

A new offset algorithm for closed 2D lines with Islands

Hyun-Chul Kim, Sung-gun Lee, Min-Yang Yang, 2006 .

Development of the integrated measuring system of strain distribution and defect using ESPI & shearography

D. Gweon, Hyun-Chul Kim, Hyun-Jong Kim, 2012 .

Current Status of Field Aided Lateral Crystallization

D. Choi, Hyun-Chul Kim, Tae-Seok Han, 2006 .

Mechanism of field-aided lateral crystallization of amorphous silicon

D. Choi, Hyun-Chul Kim, Young Bae Kim, 2005 .

Staggered and Inverted Staggered Type Organic-Inorganic Hybrid TFTs with ZnO Channel Layer Deposited by Atomic Layer Deposition

Hyun-Chul Kim, Y. Choi, H. Chang, 2009 .

Enhanced performance of perovskite solar cells via laser-induced heat treatment on perovskite film

Hyun-Chul Kim, H. Seo, N. Tran, 2020, Solar Energy.

Precision micro EDM based on real-time monitoring and electrode wear compensation

Hyun-Chul Kim, Van-Quang Nguyen, T. Duong, 2015 .

Fabrication of Polycrystalline Silicon Thin Film Transistors in Array Patterns by Field-Aided Lateral Crystallization Technique

Hyeon-Pyo Jeon, D. Choi, Hyun-Chul Kim, 2007 .

Impact of DBPs on the fate of zebrafish; Behavioral and lipid profile changes

Hyun-Chul Kim, S. Maeng, Sungpyo Kim, 2020 .

Fully solution-processed perovskite solar cells fabricated by lamination process with silver nanoparticle film as top electrode

Hyun-Chul Kim, X. Trinh, 2020 .

Characterization of (Ba, Sr)RuO3 films deposited by metal organic chemical vapor deposition

D. Choi, Hyun-Chul Kim, Yoongu Kim, 2004 .

Deformation analysis of rectangular channel structures in micro pattern machining

Hyun-Chul Kim, T. Duong, 2015 .

A fast fabrication of copper nanowire transparent conductive electrodes by using pulsed laser irradiation

Hyun-Chul Kim, N. Tran, T. Duong, 2017, Scientific Reports.

Pulsed Electrodeposition for Copper Nanowires

Hyun-Chul Kim, N. Tran, Ha-My Hoang, 2020, Crystals.

Low cost fabrication of flexible transparent electrodes using copper nanowires

Hyun-Chul Kim, N. Tran, T. Duong, 2017 .

A zinc-based shell for copper nanowires network to prevent oxidation

Hyun-Chul Kim, Ha-My Hoang, T. Duong, 2019 .

Complete prevention of reaction at HfO2/Si interfaces by 1 nm silicon nitride layer

D. Choi, Hikaru Kobayashi, Hyun-Chul Kim, 2008 .

Influence of electric field intensity on the copper catalyst-mediated crystallization of amorphous silicon

D. Choi, Hyun-Chul Kim, Young-Bae Kim, 2005 .

Fast and simple fabrication of flexible and transparent electrode based on patterned copper nanowires by mechanical lithography transfer

Hyun-Chul Kim, D. Nguyen, N. Tran, 2019, Thin Solid Films.

Experimental Study on the TWSME Characteristics using Compressive Loading Cycles

Jung-Ju Lee, Hyun-Chul Kim, Y. Yoo, 2009 .

Extremely Simple and Rapid Fabrication of Flexible Transparent Electrodes Using Ultralong Copper Nanowires

Hyun-Chul Kim, T. Duong, 2018 .

A Study on Mechanical Properties of MWNT/PMMA nanocomposites

Jung-Ju Lee, Hyun-Chul Kim, Chun-Gon Kim, 2004 .

Mesh-based tool path generation for constant scallop-height machining

Min-Yang Yang, Hyun-Chul Kim, Sung-Gun Lee, 2008 .

Electrochemical etching technique for tungsten electrodes with controllable profiles for micro-electrical discharge machining

Hyun-Chul Kim, T. Duong, 2015, International Journal of Precision Engineering and Manufacturing.

A fast fabrication of copper nanowire transparent conductive electrodes by using pulsed laser irradiation

Hyun-Chul Kim, N. Tran, T. Duong, 2017, Scientific Reports.

Tool path generation for contour parallel milling with incomplete mesh model

Hyun-Chul Kim, Hyun-Chul Kim, 2010 .

Interface states for HfO2/Si structure observed by x-ray photoelectron spectroscopy measurements under bias

D. Choi, Hyun-Chul Kim, Young-Bae Kim, 2006 .

An investigation of electrical nickel deposition on copper nanowires-based electrodes

Hyun-Chul Kim, Ha-My Hoang, T. Duong, 2020, Chemical Engineering Communications.

CL surface deformation approach for a 5-axis tool path generation

Min-Yang Yang, Hyun-Chul Kim, Hyun-Chul Kim, 2006 .

An optimized contour parallel tool path for 2D milling with flat endmill

Min-Yang Yang, Hyun-Chul Kim, Sung-Gun Lee, 2006 .

Tool path generation and modification for constant cutting forces in direction parallel milling

Hyun-Chul Kim, Hyun-Chul Kim, 2011 .

Tool path modification for optimized pocket milling

Hyun-Chul Kim, Hyun-Chul Kim, 2007 .

Selection of machining conditions for microchannels in ultraprecision diamond turning

Hyun-Chul Kim, Dong-Yoon Lee, T. Duong, 2013 .

Electrochemical etching technique for tungsten electrodes with controllable profiles for micro-electrical discharge machining

Hyun-Chul Kim, T. Duong, 2015 .

Two-way shape memory effect induced by repetitive compressive loading cycles

Jung-Ju Lee, Hyun-Chul Kim, Y. Yoo, 2009 .

Development of a NiTi actuator using a two-way shape memory effect induced by compressive loading cycles

Hyun-Chul Kim, Jung-Ju Lee, Hyun-Chul Kim, 2008 .

Using a nanosecond laser to pattern copper nanowire-based flexible electrodes: From simulation to practical application

Hyun-Chul Kim, N. Tran, Ha-My Hoang, 2020 .

Development of machining technology for micropatterns with large surface area

Sung-Gun Lee, Hyun-Chul Kim, Hyun-Chul Kim, 2012 .

A New Method for Measuring Generalized Geometric Errors for a New Type of Coordinate Measuring Machine Using a Laser Tracker

H. C. Kim, N. H. Tran, A. T. Vo, 2017, Experimental Techniques.

A high productivity and speedy synthesis process for copper nanowires via an ethylenediamine-mediated method

Hyun-Chul Kim, T. Duong, 2017, International Nano Letters.

Optimum tool path generation for 2.5D direction-parallel milling with incomplete mesh model

Hyun-Chul Kim, Hyun-Chul Kim, 2010 .

An Optimized Direction Parallel Tool Path Generation for Rough Machining

Hyun-Chul Kim, Hyun-Chul Kim, 2008 .

Incomplete mesh-based tool path generation for optimum zigzag milling

Min-Yang Yang, Hyun-Chul Kim, Hyun-Chul Kim, 2008 .