C. Allen

发表

The effect of fretting on the fatigue behaviour of plasma nitrided stainless steels

C. Allen, C. Li, T. Bell, 2003 .

C. Allen, M. Sheen, J. Williams, 2001 .

Design development of a copper-coated canister for the disposal of spent fuel in a deep geological repository in Opalinus Clay

C. Allen, N. Diomidis, L. Johnson, 2017 .

Laser and Hybrid Laser-MIG Welding of 6.35 and 12.7mm Thick Aluminium Aerospace Alloy

P. Prangnell, G. Verhaeghe, P. Hilton, 2006 .

Structural Design Codes of Australia and New Zealand: Seismic Actions

George P. Kouretzis, C. Allen, M. Masia, 2015 .

What ductility value should be used when assessing unreinforced masonry buildings

J. Ingham, C. Allen, D. Dizhur, 2013 .

Dry sliding wear behaviour of polyamide 66 and polycarbonate composites

C. Allen, J. H. Byett, 1992 .

Fluid Flow Characteristics and Porosity Behavior in Full Penetration Laser Welding of a Titanium Alloy

Dong Du, Baohua Chang, Chris Allen, 2015, Metallurgical and Materials Transactions B.

The abrasive-corrosive wear of stainless steels☆

C. Allen, A. Ball, B. Protheroe, 1981 .

Laser welding studies on Ti-6Al-4V in air in conjunction with cathodic protection

C. Allen, D. Fray, C. Schwandt, 2016, Welding in the World.

The sliding wear of ultrahigh molecular weight polyethylene in an aqueous environment

C. Allen, K. Marcus, 1994 .

Welding of Ti–6Al–4V in Air

C. Allen, D. Fray, C. Schwandt, 2014 .

A review of the performance of engineering materials under prevalent tribological and wear situations in South African industries

A. Ball, C. Allen, C. Allen, 1996 .

Critical variables in high temperature erosive wear

C. Allen, M. Suckling, 1997 .

The effects of angle of impact and material properties on the erosion rates of ceramics

C. Allen, R. Wellman, 1995 .

The erosion-corrosion resistance of tungsten-carbide hard metals

C. Allen, E. Wentzel, 1997 .

Sliding wear behaviour of ion implanted ultra high molecular weight polyethylene against a surface modified titanium alloy Ti-6Al-4V

C. Allen, T. Bell, A. Bloyce, 1996 .

Thermal and Fluid Flow Characteristics and their Relationships with Porosity in Laser Welding of AA5083

P. Hilton, C. Allen, J. Blackburn, 2013 .

Correlation of mechanical properties to microstructure in Inconel 718 fabricated by Direct Metal Laser Sintering

C. Allen, M. Taheri, Kathryn A. Small, 2018 .

The fatigue behaviour of metastable (AISI-304) austenitic stainless steel wires

R. B. Tait, C. Allen, C. Allen, 2007 .

The abrasive wear of steels in South African soils

C. Allen, O. Scheffler, 1988 .

Investigation into the Effects of Prior Plasticity on Creep Accumulation in 316H Stainless Steel

H. Coules, C. Allen, C. Truman, 2022, ICEM 2022.

An evaluation of the wear behaviour of metallic materials subjected to soil abrasion

C. Allen, O. Scheffler, S. Quirke, 1988 .

The dry sliding wear behaviour of an austempered spheroidal cast iron

C. Allen, E. Fordyce, 1990 .

The abrasive wear behaviour of austempered spheroidal cast irons

C. Allen, S. Shepperson, 1988 .

Microstructure/property relationships in the cavitation erosion of tungsten carbide-cobalt

C. Allen, V. Pugsley, 1999 .

Erosion-corrosion resistance of tungsten carbide hard metals with different binder compositions

C. Allen, C. Allen, E. J. Wentzel, 1995 .

Microstructure/property relationships in the slurry erosion of tungsten carbide–cobalt

C. Allen, C. Allen, V. Pugsley, 1999 .

Dual Focus Nd:YAG Laser Welding of Titanium Alloys

Lin Li, P. Hilton, C. Allen, 2010 .

On the nature of the transfer film at the interface of a water-lubricated sliding polymer-metal couple

C. Allen, A. Ball, K. Marcus, 1992 .

Nickel-containing superalloy laser weld qualities and properties

C. Allen, T. Nijdam, Robert Shaw-Edwards, 2015 .

Meeting weld quality criteria when laser welding Ni-based alloy 718

P. Hilton, C. Allen, J. Blackburn, 2012 .

Investigation of optical sensor approaches for real-time monitoring during fibre laser welding

Chris Allen, Alessandro Cisi, C. Allen, 2017 .

The effect of cold work and heat treatment on the fatigue behaviour of 3CR12 corrosion resistant steel wire

R. B. Tait, C. Allen, C. Allen, 2007 .

The effect of ion implantation on the sliding wear behaviour of ultrahigh molecular weight polyethylene against an oxidised titanium alloy Ti-6Al-4V

C. Allen, T. Bell, A. Bloyce, 1995 .

The high temperature erosion of commercial thermally sprayed metallic and cermet coatings by solid particles

C. Allen, P. Hoop, 1999 .

The design of an apparatus to test wear of boiler tubes

M. Suckling, C. Allen, C. Allen, 1995 .

Repetitive impact wear of steels

C. Allen, C. Allen, R. W. Fricke, 1993 .

Experimental testing of unreinforced masonry walls with openings subject to cyclic in-plane shear

Nebojša Mojsilović, Michael C. Griffith, Mark J. Masia, 2016 .

Cyclic in-plane shear behaviour of unreinforced masonry walls with openings

Michael C. Griffith, C Allen, Mark J. Masia, 2014 .

The water lubricated, sliding wear behaviour of polymeric materials against steel

C. Allen, C. Allen, C. G. Clarke, 1991 .

The effect of grinding direction on the nature of the transfer film formed during the sliding wear of ultrahigh molecular weight polyethylene against stainless steel

C. Allen, K. Marcus, A. Ball, 1991 .

The sliding wear of UHMWPE against zirconia in saline containing proteins

C. Allen, M. Kernick, 1997 .