P. Shipway

发表

The effect of contact geometry on fretting wear rates and mechanisms for a high strengthsteel

A. Warmuth, S. Pearson, P. Shipway, 2013 .

The effect of small stresses on the kinetics of the bainite transformation

H. Bhadeshia, P. Shipway, 1995 .

Finite element simulation of fretting wear-fatigue interaction in spline couplings

Sean B. Leen, E. J. Williams, P. H. Shipway, 2008 .

Abrasive wear behaviour of conventional and nanocomposite HVOF-sprayed WC–Co coatings

P. H. Shipway, P. Shipway, D. G. McCartney, 1999 .

Sliding wear behaviour of HVOF sprayed WC-Co coatings deposited with both gas-fuelled and liquid-fuelled systems

P. Shipway, D. G. McCartney, T. Sudaprasert, 2003 .

A comparison of three weld consumables for P92 under creep

P. Shipway, Wei Sun, T. Hyde, 2012 .

Three-dimensional characterisation of surface texture for road stones undergoing simulated traffic wear

P. Shipway, A. Dunford, A. Parry, 2012 .

Influence of kinematic operating parameters on kerf geometry in abrasive waterjet machining of silicon carbide ceramics

D. Axinte, P. Shipway, J. Folkes, 2009 .

Nanotribology of biaxially oriented poly(ethylene terephthalate) film

P. Shipway, G. Leggett, B. Beake, 2001 .

The rôle of particle properties in the erosion of brittle materials

I. Hutchings, P. Shipway, 1996 .

Fracture of brittle spheres under compression and impact loading. I. Elastic stress distributions

Ian M. Hutchings, P. H. Shipway, I. Hutchings, 1993 .

Effects of particle crushing in abrasion testing of steels with ash from biomass-fired powerplants

P. Shipway, D. G. McCartney, S. M. Nahvi, 2009 .

Improved method of testing durability and adhesion of paints and other coatings

I. Hutchings, P. Shipway, 1993 .

Influence of nozzle roughness on conditions in a gas-blast erosion rig

I. Hutchings, P. Shipway, 1993 .

High-velocity oxyfuel reactive spraying of mechanically alloyed Ni-Ti-C powders

P. Shipway, D. G. McCartney, A. Horlock, 2005 .

Residual stresses in high-velocity oxy-fuel thermally sprayed coatings – Modelling the effect of particle velocity and temperature during the spraying process

S. Leen, P. Shipway, P. Bansal, 2007 .

The potential of WC-Co hardmetals and HVOF sprayed coatings to combat water-droplet erosion

P. Shipway, K. Gupta, 2011 .

A study of the tribological behaviour of three carbon-based coatings, tested in air, water and oil environments at high loads

P. Shipway, D. Teer, D. Mercs, 2004 .

Abrasive waterjet cutting of a titanium alloy: The influence of abrasive morphology and mechanical properties on workpiece grit embedment and cut quality

P. H. Shipway, C. R. Carpenter, F. Boud, 2010 .

Influence of mechanical properties on the nanowear of uniaxially oriented poly(ethylene terephthalate) film

P. Shipway, G. Leggett, B. Beake, 2004 .

Modeling the effectiveness of oil lubrication in reducing both friction and wear in a fretting contact

P. Shipway, Wei Sun, Min Wang, 2019, Wear.

The effect of frequency on both the debris and the development of the tribologically transformed structure during fretting wear of a high strength steel

P. Shipway, Wei Sun, C. Bennett, 2019, Wear.

An experimental study on the key fretting variables for flexible marine risers

S. Leen, P. Shipway, A. Harte, 2018 .

Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact

P. Shipway, Wei Sun, A. L. M. Tobi, 2017 .

The role of geometry changes and debris formation associated with wear on the temperature field in fretting contacts

P. Shipway, Wei Sun, X. Jin, 2016 .

The influence of surface hardness on the fretting wear of steel pairs: its role in debris retention in the contact

A. Warmuth, S. Pearson, P. Shipway, 2015 .

Bonding between aluminium and copper in cold spraying: story of asymmetry

P. Shipway, D. G. McCartney, T. Hussain, 2012 .

Effect of cold spray deposition of a titanium coating on fatigue behavior of a titanium alloy

P. Shipway, D. G. McCartney, T. Price, 2006 .

Effect of deposition conditions on the properties and annealing behavior of cold-sprayed copper

P. Shipway, D. G. McCartney, E. Calla, 2006 .

Cold gas dynamic spraying of aluminum: The role of substrate characteristics in deposit formation

P. Shipway, D. G. McCartney, D. Zhang, 2005 .

Optimization Of Heat Transfer In The FiniteElement Process Modelling Of Inertia FrictionWelding Of SCMV And AerMet 100

P. Shipway, T. Hyde, C. Bennett, 2010 .

Sliding wear behaviour of laser clad coatings based upon a nickel-based self-fluxing alloy co-deposited with conventional and nanostructured tungsten carbide–cobalt hardmetals

Jiajun Liu, I. Hutchings, P. Shipway, 2005 .

The role of lubrication and corrosion in abrasion of materials in aqueous environments

P. Shipway, S. Wirojanupatump, 2002 .

Abrasion of mild steel in wet and dry conditions with the rubber and steel wheel abrasion apparatus

P. Shipway, S. Wirojanupatump, 2000 .

A direct comparison of wet and dry abrasion behaviour of mild steel

P. Shipway, S. Wirojanupatump, 1999 .

The effect of gross sliding fretting wear on stress distributions in thin W-DLC coating systems

S. Leen, S. Pearson, P. Shipway, 2010 .

A study on the interaction between fretting wear and cyclic plasticity for Ti–6Al–4V

S. Leen, P. Shipway, J. Ding, 2009 .

Electrodeposition of nickel-carbon nanotube nanocomposite coatings for enhanced wear resistance

C. R. Carpenter, P. Shipway, Yanqiu Zhu, 2011 .

Effective dispersal of CNTs in the fabrication of electrodeposited nanocomposites

C. R. Carpenter, P. Shipway, Yanqiu Zhu, 2011 .

Microstructure and abrasive wear behaviour of shielded metal arc welding hardfacings used in the sugarcane industry

P. H. Shipway, P. Shipway, D. G. McCartney, 2007 .

Effect of particle impact on residual stress development in HVOF sprayed coatings

S. Leen, P. Shipway, P. Bansal, 2006, International Thermal Spray Conference.

The critical role of fretting wear in the analysis of fretting fatigue

S. Leen, P. Shipway, J. J. Madge, 2007 .

Lubricants and lubrication

I. Hutchings, P. Shipway, 2017 .

Kamdi, Z. and Shipway, P.H. and Voisey, K.T. and Sturgeon, A.J. (2011) Abrasive wear behaviour of conventional and large-particle tungsten carbide-based cermet coatings as a function of abrasive size

P. Shipway, A. Sturgeon, K. Voisey, 2016 .

Is the wear coefficient dependent upon slip amplitude in fretting? Vingsbo and Söderberg revisited

S. Pearson, P. Shipway, 2015 .

HVOF and Laser-Cladded Fe–Cr–B Coating in Simulated Biomass Combustion: Microstructure and Fireside Corrosion

P. Shipway, T. Hussain, L. Reddy, 2017, Oxidation of Metals.

Title A critical analysis of plastic flow behaviour in axisymmetricisothermal and Gleeble compression testing

E. J. Williams, S. Leen, P. Shipway, 2018 .

A critical analysis of plastic flow behaviour in axisymmetric isothermal and Gleeble compression testing

E. J. Williams, S. Leen, P. Shipway, 2010 .

Finite element modelling of the fracture behaviour of brittle coatings

S. Leen, P. Shipway, P. Bansal, 2006 .

Developing higher strength microalloyed medium carbon steel capable of being fracture split after laser transformation notching

P. Shipway, D. G. McCartney, K. Voisey, 2013 .

Sliding wear of a self-mated thermally sprayed chromium oxide coating in a simulated PWR water environment

V. Ratia, P. Shipway, D. G. McCartney, 2019, Wear.

Frictional, adhesive and mechanical properties of polyester films probed by scanning force microscopy

P. Shipway, G. Leggett, B. Beake, 1999 .

Characterisation of fretting-induced wear debris for Ti-6Al-4 V

E. J. Williams, S. Leen, P. Shipway, 2009 .

Characterisation of creep-weak zones (white bands) in grade 91 weld metal

P. Shipway, F. Boué-Bigne, Y. Zhang, 2009 .

Experimental validation of FE predicted fracture behaviour in thermally sprayed coatings

S. Leen, P. Shipway, P. Bansal, 2006 .

Sliding wear behaviour of conventional and nanostructured HVOF sprayed WC–Co coatings

P. H. Shipway, P. Shipway, D. G. McCartney, 2005 .

Corrosion of cast Stellite-3 analogue in simulated PWR conditions

P. Shipway, D. Stewart, T. Hussain, 2018, Corrosion Science.

Nanowear of polystyrene surfaces: molecular entanglement and bundle formation

P. Shipway, F. Dinelli, G. Leggett, 2005 .

Mechanical stabilisation of bainite

H. Bhadeshia, P. Shipway, D. Shipway, 1995 .

The influence of CNT co-deposition on electrodeposit grain size and hardness

C. R. Carpenter, P. Shipway, Yanqiu Zhu, 2011 .

Establishing relationships between bath chemistry, electrodeposition and microstructure of Co–W alloy coatings produced from a gluconate bath

P. Shipway, N. Weston, S. Harris, 2010 .

Nanostructured Co–W coatings produced by electrodeposition to replace hard Cr on aerospace components

P. Shipway, S. Harris, J. Yellup, 2010 .

Microstructural evolution in thermally sprayed WC-Co coatings: Comparison between nanocomposite and conventional starting powders

P. H. Shipway, P. Shipway, D. G. McCartney, 2000 .

Corrosion resistance of zinc–magnesium coated steel

C. Rudd, P. Shipway, N. Hosking, 2007 .

A comparison of the abrasive wear behaviour of HVOF sprayed titanium carbide- and titanium boride-based cermet coatings

P. Shipway, D. G. McCartney, M. I. Jones, 2001 .

Tribology: friction and wear of engineering materials, 2nd edition

I. Hutchings, P. Shipway, 2017 .

Measurement of green strength of warm pressed Distaloy PM compacts: influence of specimen geometry and test method

P. Shipway, A. Kennedy, C. Degnan, 2003 .

Carbide stoichiometry in TiCx and Cu–TiCx produced by self-propagating high-temperature synthesis

P. Shipway, A. Kennedy, A. Saidi, 2002 .

Abrasive wear behaviour of Ni(Cr)–TiB2 coatings deposited by HVOF spraying of SHS-derived cermet powders

P. Shipway, D. G. McCartney, B. Lotfi, 2003 .

Thermally sprayed Ni(Cr)–TiB2 coatings using powder produced by self-propagating high temperature synthesis: microstructure and abrasive wear behaviour

P. Shipway, D. G. McCartney, J. Wood, 2002 .

The incorporation of self-propagating, high-temperature synthesis-formed Fe-TiB2 into ferrous melts

P. Shipway, C. Degnan, 2002 .

A comparison of the reciprocating sliding wear behaviour of steel based metal matrix composites processed from self-propagating high-temperature synthesised Fe-TiC and Fe-TiB2 masteralloys

P. Shipway, C. Degnan, 2002 .

Elevated temperature sliding wear behaviour of TiC-reinforced steel matrix composites

P. Shipway, J. Wood, C. Degnan, 2001 .

A comparison of the abrasive wear behaviour of iron-chromium based hardfaced coatings deposited by SMAW and electric arc spraying

P. Shipway, D. G. McCartney, V. Buchanan, 2008 .

Reaction synthesis of Cu-TiCx master-alloys for the production of copper-based composites

P. Shipway, A. Kennedy, N. Zarrinfar, 2004 .

Comparison of the green strength of warm compacted Astaloy CrM and Distaloy AE Densmix* powder compacts

P. Shipway, A. Kennedy, C. Degnan, 2004 .

Fracture toughness measurements of powder metallurgical (P/M) green compacts: A novel method of sample preparation

P. Shipway, A. Kennedy, C. Degnan, 2004 .

Sliding wear behaviour of electrodeposited cobalt–tungsten and cobalt–tungsten–iron alloys

P. H. Shipway, S. J. Harris, P. Shipway, 2003 .

Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components

P. Shipway, D. G. McCartney, T. Hussain, 2009 .

Corrosion Performance of Laser Posttreated Cold Sprayed Titanium Coatings

P. H. Shipway, P. Shipway, D. G. McCartney, 2011 .

Production of titanium deposits by cold-gas dynamic spray: Numerical modeling and experimental characterization

P. Shipway, D. G. McCartney, T. Marrocco, 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.

Tapping mode and phase imaging of biaxially oriented polyester films

P. Shipway, G. Leggett, B. Beake, 2001 .

Sliding wear behaviour of aluminium-based metal matrix composites produced by a novel liquid route

P. Shipway, A. Kennedy, A. J. Wilkes, 1998 .

Influence of heat treatment on the abrasive wear behaviour of HVOF sprayed WC–Co coatings

P. H. Shipway, P. Shipway, D. G. McCartney, 1998 .

Influence of reinforcement volume fraction on sliding wear behaviour of SHS derived ferrous based metal matrix composite

P. Shipway, C. Degnan, 2002 .

Interaction of displacement amplitude and frequency effects in fretting wear of a high strength steel: Impact on debris bed formation and subsurface damage

P. Shipway, Wei Sun, C. Bennett, 2021 .

Debris development in fretting contacts – Debris particles and debris beds

P. Shipway, Wei Sun, C. Bennett, 2020, Tribology International.

The Role of Temperature and Frequency on Fretting Wear of a Like-on-Like Stainless Steel Contact

P. Shipway, Wei Sun, W. Sun, 2017, Tribology Letters.

Effect of test conditions on the temperature at which a protective debris bed is formed in fretting of a high strength steel

P. Shipway, E. K. Hayes, 2017 .

The role of frictional power dissipation (as a function of frequency) and test temperature on contact temperature and the subsequent wear behaviour in a stainless steel contact in fretting

P. Shipway, Wei Sun, X. Jin, 2015 .

The effect of temperature on wear and friction of a high strength steel in fretting

P. H. Shipway, J. O. Abere, S. Pearson, 2013 .

The influence of HVOF powder feedstock characteristics on the abrasive wear behaviour of CrxCy–NiCr coatings

P. Shipway, D. G. McCartney, S. Wirojanupatump, 2001 .

Mechanisms of damage initiation in a titanium alloy subjected to water droplet impact during ultra-high pressure plain waterjet erosion

Peter Kinnell, P. H. Shipway, Janet Folkes, 2012 .

Microstructure and abrasive wear behaviour of FeCr–TiC coatings deposited by HVOF spraying of SHS powders

P. Shipway, D. G. McCartney, M. I. Jones, 2001 .

Effects of Ti powder size and ignition method onproducts of SHS reaction in Cu-Ti-C system

P. Shipway, A. Kennedy, A. Saidi, 2003 .

Microscale abrasion–corrosion behaviour of WC–Co hardmetals and HVOF sprayed coatings

P. Shipway, L. Howell, 2005 .

Microstructural characterisation of subsurface deformation and the degradation of Stellite 6 induced by self-mated sliding contact in a simulated PWR environment

P. Shipway, D. G. McCartney, D. Stewart, 2021 .

A multi-scale model for fretting wear with oxidation-debris effects

E. J. Williams, S. Leen, P. Shipway, 2009 .

The influence of particle properties on the erosive wear of sintered boron-carbide

I. Hutchings, P. Shipway, 1991 .

Microstructure evolution and thermal stability of an Fe-based amorphous alloy powder and thermally sprayed coatings

P. Shipway, D. G. McCartney, K. Chokethawai, 2009 .

Process parameter optimisation of laser clad iron based alloy: Predictive models of deposition efficiency, porosity and dilution

P. Shipway, T. Hussain, L. Reddy, 2018, Surface and Coatings Technology.

Carbide stoichiometry in TiC x and Cu-TiC x produced by self-propagating high-temperature synthesis

P. Shipway, A. Saidi, N. Zarrinfar, 2002 .

Abrasive wear behaviour of conventional and large-particle tungsten carbide-based cermet coatings as a function of abrasive size and type

P. Shipway, A. Sturgeon, K. Voisey, 2011 .

Fretting wear mapping: the influence of contact geometry and frequency on debris formation and ejection for a steel-on-steel pair

A. Warmuth, P. Shipway, W. Sun, 2015, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

Dependence of microscale abrasion mechanisms of WC-Co hardmetals on abrasive type

P. Shipway, J. J. Hogg, 2005 .

The effect of laser transformation notching on the controlled fracture of a high carbon (C70S6 ) steel

P. Shipway, K. Voisey, S. Harris, 2008 .

Three-body abrasive wear of fine pearlite, nanostructured bainite and martensite

H. Bhadeshia, P. Shipway, H. Bhadeshia, 2013 .

The hardness and sliding wear behaviour of a bainitic steel

P. Shipway, A. Dent, S. J. Wood, 1997 .

The mechanical stabilisation of Widmanstätten ferrite

H. Bhadeshia, P. Shipway, H. Bhadeshia, 1997 .

Micro-scale abrasive wear behaviour of HVOF sprayed and laser-remelted conventional and nanostructured WC-Co coatings

Jiajun Liu, I. Hutchings, P. Shipway, 2005 .

Friction and sliding wear behaviour of electrodeposited cobalt and cobalt-tungsten alloy coatings for replacement of electrodeposited chromium

P. Shipway, S. Harris, D. Weston, 2009 .

Particle motion and modes of wear in the dry sand-rubber wheel abrasion test

P. Shipway, S. M. Nahvi, D. McCartney, 2009 .

The effect of temperature on sliding wear of self-mated HIPed Stellite 6 in a simulated PWR water environment

P. Shipway, D. Stewart, D. Zhang, 2019, Wear.

A comparison of the galling wear behaviour of PVD Cr and electroplated hard Cr thin films

P. Shipway, D. Stewart, J. Daure, 2018, Surface and Coatings Technology.

Wear of bulk ceramics in micro-scale abrasion—The role of abrasive shape and hardness and its relevance to testing of ceramic coatings

P. H. Shipway, P. Shipway, J. J. Hogg, 2007 .

A mechanical model for particle motion in the micro-scale abrasion wear test

P. Shipway, 2004 .

Comparison of the sliding wear behaviour of self-mated HIPed Stellite 3 and Stellite 6 in a simulated PWR water environment

P. Shipway, D. Stewart, D. Zhang, 2019, Wear.

Internal combustion engine cold-start efficiency: A review of the problem, causes and potential solutions

R. Brooks, P. H. Shipway, Andrew Roberts, 2014 .

The effect of coating architecture and defects on the corrosion behaviour of a PVD multilayer Inconel 625/Cr coating

P. Shipway, D. Stewart, K. Voisey, 2017 .

Influence of KCl and HCl on a laser clad FeCrAl alloy: In-Situ SEM and controlled environment High temperature corrosion

P. Shipway, M. Halvarsson, T. Hussain, 2018, Corrosion Science.

Requirements for developing high temperature creep life models for ageing pipework systems using power plant condition monitoring and inspection data

Wei Sun, R. Bonetti, A. Morris, 2020 .

A method for optimizing the particle flux in erosion testing with a gas-blast apparatus

Ian M. Hutchings, P. H. Shipway, I. Hutchings, 1994 .

The role of a thermally sprayed CuNiIn underlayer in the durability of a dry-film lubricant system in fretting – A phenomenological model

P. Shipway, K. Voisey, G. Pattinson, 2018, Tribology International.

An Assessment of the Wear Characteristics of Microcutting Arrays Produced From Polycrystalline Diamond and Cubic Boron Nitride Composites

Dragos Axinte, P. H. Shipway, Manuela Pacella, 2016 .

Characteristics of the surface of a titanium alloy following milling with abrasive waterjets

I. R. Pashby, P. H. Shipway, P. Shipway, 2005 .

Parametric Effects on Grit Embedment and Surface Morphology in an Innovative Hybrid Waterjet Cleaning Process for Alpha Case Removal from Titanium Alloys

Peter Kinnell, P. H. Shipway, P. Shipway, 2013 .

A numerical comparison of the flow behaviour in Friction Stir Welding (FSW) using unworn and worn tool geometries

P. H. Shipway, C. J. Bennett, P. Shipway, 2015 .

Attrition of brittle spheres by fracture under compression and impact loading

Ian M. Hutchings, P. H. Shipway, I. Hutchings, 1993 .

Empirical relationships between hardness, replica and strain and their roles in health monitoring based life assessment for aged power plant materials

P. Shipway, A. Morris, W. Sun, 2022, International Journal of Pressure Vessels and Piping.

Study on Process Optimization of Cold Gas Spraying

P. Shipway, S. Gu, H. Tabbara, 2011 .

Impact phenomena in cold-spraying of titanium onto various ferrous alloys

P. Shipway, T. Hussain, D. McCartney, 2011 .

Micro-Scale Abrasion of WC-Based Coatings with Different Abrasive Type

P. Shipway, Z. Kamdi, K.T. Voisey, 2013 .

A Modified Micro-Scale Abrasion for Large Hard Phase Cermet

P. Shipway, K. Voisey, Z. Kamdi, 2013 .

Gross slip fretting wear performance of a layered thin W-DLC coating: Damage mechanisms and life modelling

S. Leen, P. Shipway, A. L. M. Tobi, 2011 .

Structure evolution and stoichiometry control of Pb(Zr, Ti)O3 thick films fabricated by electrospray assisted vapour deposition

P. Shipway, Jing Du, K. Choy, 2010 .

A hybrid implicit—explicit finite element methodology for coating formation in the high-velocity oxy-fuel spraying process

S. Leen, P. Shipway, P. Bansal, 2007 .

The role of test conditions on the microabrasive wear behaviour of soda-lime glass

P. Shipway, 1999 .

The role of microstructural development in the hydrothermal corrosion of cast and HIPed Stellite 6 analogues in simulated PWR conditions

P. Shipway, D. Stewart, T. Hussain, 2019, Corrosion Science.

Thermal effects in blasting and erosion of polymeric materials

P. Shipway, D. Weston, 2009 .

The effect of plume divergence on the spatial distribution and magnitude of wear in gas-blast erosion

P. Shipway, 1997 .

Debris expulsion as a rate determining process in fretting – The effect of slip amplitude on debris expulsion behaviour and rates

P. Shipway, C. Bennett, T. Zhu, 2023, Wear.

A finite element based approach to simulating the effects of debris on fretting wear

I. R. McColl, S. Leen, P. Shipway, 2007 .

The roles of contact conformity, temperature and displacement amplitude on the lubricated fretting wear of a steel-on-steel contact

A. Warmuth, P. Shipway, W. Sun, 2016, Royal Society Open Science.

Microscale abrasive wear of polymeric materials

P. H. Shipway, P. Shipway, N. K Ngao, 2003 .

Sliding wear analysis of cobalt based alloys in nuclear reactor conditions

P. Shipway, D. Dini, D. Stewart, 2017 .

A numerical methodology for predicting tool wear in Friction Stir Welding

P. H. Shipway, Ahmed Hasan, C. J. Bennett, 2017 .

Fracture of brittle spheres under compression and impact loading. II: Results for lead-glass and sapphire spheres

Ian M. Hutchings, P. H. Shipway, I. Hutchings, 1993 .

Coating removal from an industrial polypropylene blend by cryogenic blasting : the development of substrate damage

P. Shipway, S. Harris, D. Weston, 2005 .

Interdependence of slurry erosion wear performance and residual stress in WC-12wt%Co and WC-10wt%VC-12wt%Co HVOF coatings

P. Shipway, N. Sacks, V. Luzin, 2020 .

Contact-evolution based prediction of fretting fatigue life: Effect of slip amplitude

Sean B. Leen, I. R. McColl, P. H. Shipway, 2007 .

The effect of particle hardness and shape when abrasive water jet milling titanium alloy Ti6Al4V

I. R. Pashby, P. H. Shipway, P. Shipway, 2009 .

Abrasive water-jet controlled depth milling of Ti6Al4V alloy: an investigation of the role of jet-workpiece traverse speed and abrasive grit size on the characteristics of the milled material

P. H. Shipway, P. Shipway, I. Pashby, 2005 .

A technical note on grit embedment following abrasive water-jet milling of a titanium alloy

I. R. Pashby, P. H. Shipway, P. Shipway, 2005 .

Investigation on the plasticity accumulation of Ti-6Al-4V fretting wear by decoupling the effects of wear and surface profile in finite element modelling

P. Shipway, Wei Sun, A. L. M. Tobi, 2017 .

Contact size and debris ejection in fretting: The inappropriate use of Archard-type analysis of wear data and the development of alternative wear equations for commonly employed non-conforming specimen pair geometries

P. Shipway, T. Zhu, 2021 .

Effects of surface roughness on local friction and temperature distributions in a steel-on-steel fretting contact

P. Shipway, Wei Sun, W. Qin, 2018 .

Adhesive transfer operates during galling

P. Shipway, D. Dye, D. Stewart, 2022, Scripta Materialia.

Galling of stainless steels as a function of test conditions in an ASTM G196-type test setup – The role of temperature, rotational velocity, interrupted rotation and rotational distance

P. Shipway, J. Daure, M. Carrington, 2023, Wear.

Measurement of friction in galling testing – An example of its use in characterising the galling behaviour of hardfacings at ambient and elevated temperature

P. Shipway, D. Stewart, J. Daure, 2021, Wear.

Finite Element Modeling of the Inertia Friction Welding of Dissimilar High-Strength Steels

Moataz M. Attallah, M. Preuss, P. Shipway, 2013, Metallurgical and Materials Transactions A.

Removal of coatings from polymer substrates by solid particle blasting to enhance reuse or recycling

P. H. Shipway, P. Shipway, D. P. Weston, 2007 .

Measurement of coating durability by solid particle erosion

I. Hutchings, P. Shipway, 1995 .

Microstructural characterisation of Tristelle 5183 (Fe-21%Cr-10%Ni-7.5%Nb-5%Si-2%C in wt%) alloy powder produced by gas atomisation

P. Shipway, D. Stewart, J. Daure, 2019, Materials & Design.

Finite element modelling of the inertia friction welding of dissimilar high strength steels

Moataz M. Attallah, M. Preuss, P. Shipway, 2013 .

A combined wear and crack nucleation–propagation methodology for fretting fatigue prediction

S. Leen, P. Shipway, J. J. Madge, 2008 .

A transient finite element analysis of thermoelastic effects during inertia friction welding

P. Shipway, T. Hyde, C. Bennett, 2011 .

Corrosion Behavior of Cold Sprayed Titanium Coatings and Free Standing Deposits

P. Shipway, T. Marrocco, T. Hussain, 2011 .

Microabrasion--a simple method to assess surface degradation of UHMWPE following sterilisation and ageing.

P. Shipway, F. Buchanan, 2002, Biomaterials.

Anisotropic Creep and Fracture Behaviour of a 9CrMoNbV Weld Metal at 650°C

Thomas H. Hyde, P. H. Shipway, J. A. Williams, 2003 .

A Method for Characterizing the Degree of Inter-particle Bond Formation in Cold Sprayed Coatings

P. Shipway, D. Zhang, T. Price, 2007 .

Microabrasion of glass – the critical role of ridge formation

P. Shipway, C. Hodge, 2000 .

Understanding and modelling wear rates and mechanisms in fretting via the concept of rate-determining processes - Contact oxygenation, debris formation and debris ejection

P. Shipway, C. Bennett, A. Kirk, 2021 .

Finite element modelling of brittle fracture of thick coatings under normal and tangential loading

S. Leen, P. Shipway, A. L. M. Tobi, 2013 .

Experimental characterisation and numerical simulation of contact evolution effect on fretting crack nucleation for Ti–6Al–4V

E. J. Williams, S. Leen, P. Shipway, 2009 .

Role of Surface Micro-Texturing in Acceleration of Initial Running-in during Lubricated Fretting

P. Shipway, Masayuki Shima, Tatsuhiro Jibiki, 2010 .

Evolution of damage in MoS2-based dry film lubricants (DFLs) in fretting wear – the effect of DFL thickness and contact geometry

P. Shipway, K. Voisey, G. Pattinson, 2017 .

Fretting wear behaviour of MoS2 dry film lubricant

P. Shipway, K. Voisey, G. Pattinson, 2015 .

HVOF Spraying of WC-Co Coatings with Liquid-Fuelled and Gas-Fuelled Systems: Competing Mechanisms of Structural Degradation

P. Shipway, T. Sudaprasert, D. McCartney, 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.

Derivation of a wear scar geometry-independent coefficient of friction from fretting loops exhibiting non-Coulomb frictional behaviour

P. Shipway, Wei Sun, X. Jin, 2016 .

Structure, properties and gas sensing behavior of Cr2 − xTixO3 films fabricated by electrostatic spray assisted vapour deposition

P. Shipway, Jing Du, K. Choy, 2010 .

Microstructure and wear properties of aluminum/aluminum–silicon composite coatings prepared by cold spraying

S. R. Bakshi, P. Shipway, Yao Chen, 2009 .

Design and selection of materials for tribological applications

I. Hutchings, P. Shipway, 2017 .

Wear by hard particles

I. Hutchings, P. Shipway, 2017 .

Modelling transformation plasticity during the growth of bainite under stress

P. H. Shipway, P. Shipway, G. I. Rees, 1997 .

Comparison of the Microstructure of Cold Sprayed and Thermally Sprayed IN718 Coatings

P. Shipway, A. Sturgeon, D. McCartney, 2006, International Thermal Spray Conference.

Corrigendum to ‘Understanding and modelling wear rates and mechanisms in fretting via the concept of rate-determining processes - Contact oxygenation, debris formation and debris ejection’ [Wear 486–487 (2021) 204066]

P. Shipway, A. M. Kirk, T. Zhu, 2022, Wear.

Particle-Substrate Interactions in Cold Gas Dynamic Spraying

P. Shipway, D. Zhang, D. McCartney, 2003, Thermal Spray 2003: Proceedings from the International Thermal Spray Conference.

COLD GAS DYNAMIC SPRAYING

P. Shipway, 2003 .

A holistic approach to structural integrity of high temperature welds in power plants

Y. Zhang, T H Hyde, W Sun, 2009, 2009 International Conference on Sustainable Power Generation and Supply.

An Asperity-Contact Based Oxidation Model for Fretting Wear with the Presence of Debris

E. J. Williams, S. Leen, P. Shipway, 2009 .

The evolution of subsurface deformation and tribological degradation of a multiphase Fe-based hardfacing induced by sliding contact

P. Shipway, J. Daure, M. Carrington, 2023, Materials Science and Engineering: A.

The dependence of wear rate on wear scar size in fretting; the role of debris (third body) expulsion from the contact

P. Shipway, Wei Sun, T. Zhu, 2019, Wear.