D. Qian

发表

Bridging Scale Methods for Nanomechanics and Materials

Harold S. Park, Wing Kam Liu, G. Wagner, 2006 .

Hierarchically buckled sheath-core fibers for superelastic electronics, sensors, and muscles

Carter S. Haines, C. Haines, M. Lima, 2015, Science.

Concurrent quantum/continuum coupling analysis of nanostructures

Dong Qian, Wing Kam Liu, D. Qian, 2008 .

Dynamic shear band propagation and micro-structure of adiabatic shear band

Wing Kam Liu, A. Rosakis, Shaofan Li, 2001 .

Tensile and torsional elastomer fiber artificial muscle by entropic elasticity with thermo-piezoresistive sensing of strain and rotation by a single electric signal

Zunfeng Liu, D. Qian, Run Wang, 2020 .

Survey of Multi-Scale Meshfree Particle Methods

Lucy T. Zhang, Wing Kam Liu, Shao-Fu Li, 2003 .

Sheath-run artificial muscles

Seon Jeong Kim, Hongbing Lu, Na Li, 2019, Science.

Prediction of Residual Stress Random Fields for Selective Laser Melted A357 Aluminum Alloy Subjected to Laser Shock Peening

Mohammad I. Hatamleh, R. Kovacevic, D. Qian, 2019, Journal of Manufacturing Science and Engineering.

Effect of Ultrasonic Nanocrystal Surface Modification on residual stress, microstructure and fatigue behavior of ATI 718Plus alloy

D. Qian, V. Vasudevan, Micheal Kattoura, 2018 .

Thermal relaxation of residual stress in laser shock peened Ti–6Al–4V alloy

D. Qian, Y. Wen, G. Ramakrishnan, 2012 .

Mechanical properties of carbon nanotubes: theoretical predictions and experimental measurements

Dong Qian, Rodney S. Ruoff, Wing Kam Liu, 2003 .

Load transfer mechanism in carbon nanotube ropes

Dong Qian, Rodney S. Ruoff, Wing Kam Liu, 2003 .

Effect of interlayer potential on mechanical deformation of multiwalled carbon nanotubes.

Dong Qian, Wing Kam Liu, R. Ruoff, 2003, Journal of nanoscience and nanotechnology.

Multiscale boundary conditions in crystalline solids: Theory and application to nanoindentation

Harold S. Park, Eduard G. Karpov, Dong Qian, 2006 .

Effect of temperature on microstructure and residual stresses induced by surface treatments in Inconel 718 SPF

D. Qian, V. Vasudevan, A. Telang, 2018, Surface and Coatings Technology.

Experimental and Finite Element Simulation Study of Thermal Relaxation of Residual Stresses in Laser Shock Peened IN718 SPF Superalloy

Kristina Langer, Dong Qian, Vijay K. Vasudevan, 2014 .

A moving-mesh gradient smoothing method for compressible CFD problems

Guirong Liu, Jianyao Yao, D. Qian, 2013 .

High spatial resolution, high energy synchrotron x-ray diffraction characterization of residual strains and stresses in laser shock peened Inconel 718SPF alloy

Zhong Zhou, Jonathan Almer, Dong Qian, 2012 .

Numerical Modeling and Mechanism Analysis of Hybrid Heating and Shock Process for Laser-Assisted Laser Peen Forming

D. Qian, Z. Yao, Yongxiang Hu, 2018, Journal of Manufacturing Science and Engineering.

A Virtual Atom Cluster Approach to the Mechanics of Nanostructures

Dong Qian, D. Qian, Rohit H. Gondhalekar, 2004 .

A study on the tensile response and fracture in carbon nanotube-based composites using molecular mechanics

D. Qian, Yijun Liu, Vineet V. Mokashi, 2007 .

MULTISCALE ANALYSIS AND DESIGN IN HETEROGENEOUS SYSTEMS

Harold S. Park, Wing Kam Liu, F. Vernerey, 2003 .

Iterative thermomechanical processing of alloy 600 for improved resistance to corrosion and stress corrosion cracking

D. Qian, Mukul Kumar, V. Vasudevan, 2016 .

Surface grain boundary engineering of Alloy 600 for improved resistance to stress corrosion cracking

D. Qian, Mukul Kumar, V. Vasudevan, 2015 .

Visco-elastic Properties of Carbon Nanotubes and Their Relation to Damping

Zhong Zhou, D. Qian, 2010 .

An investigation on the transition from creep damage to creep fracture

Zhen Chen, D. Qian, Y. Zhang, 1998 .

Meshfree simulation of failure modes in thin cylinders subjected to combined loads of internal pressure and localized heat

Dong Qian, Shaofan Li, Thomas Eason, 2008 .

A domain-reduction approach to bridging-scale simulation of one-dimensional nanostructures

Wing Kam Liu, D. Qian, E. G. Karpov, 2011 .

Disulfide-bridged cleavable PEGylation in polymeric nanomedicine for controlled therapeutic delivery.

D. Qian, Donglu Shi, Haiqing Dong, 2015, Nanomedicine.

A computational study on the microstructural evolution in near-surface copper grain boundary structures due to femtosecond laser processing

M. R. Karim, D. Qian, A. Malik, 2018 .

Mechanics of C 60 in Nanotubes

Wing Kam Liu, R. Ruoff, D. Qian, 2001 .

A boundary element method for the analysis of CNT/polymer composites with a cohesive interface model based on molecular dynamics

N. Nishimura, D. Qian, Yijun Liu, 2008 .

Simulation and Experimental Comparison of Laser Impact Welding with a Plasma Pressure Model

Mohammad I. Hatamleh, D. Qian, A. Malik, 2019, Metals.

Surface modification and ultrasonication effect on the mechanical properties of carbon nanofiber/polycarbonate composites

M. Schulz, D. Qian, Xingping Zhou, 2006 .

Multiscale Modeling of CNT Composites using Molecular Dynamics and the Boundary Element Method

N. Nishimura, D. Qian, Yijun Liu, 2013 .

High Cycle Fatigue Simulation using Multi-temporal Scale Method coupled with Continuum Damage Mechanics

D. Qian, S. Bhamare, 2013 .

Multiscale reduced-order modeling of fused filament fabricated composites

Wing Kam Liu, D. Qian, S. Mojumder, 2022, 2209.02642.

Nonlocal matching boundary conditions for non-ordinary peridynamics with correspondence material model

Shaoqiang Tang, D. Qian, Clint Nicely, 2018, Computer Methods in Applied Mechanics and Engineering.

Lamellar Ceramic Semicrystalline‐Polymer Composite Fabricated by Freeze Casting

Zhong Zhou, M. Minary‐Jolandan, D. Qian, 2017 .

Effect of the quenching residual stress on ductile fracture behavior of pre-stretched aluminum alloy plates

D. Qian, Cai-chao Zhu, Chaosheng Song, 2017 .

A molecular mechanics study on the effect of surface modification on the interfacial Properties in carbon nanotube/polystyrene nanocomposites

D. Qian, D. Shi, P. He, 2010 .

Ductile fracture in thin sheet metals: a FEM study of the Sandia fracture challenge problem based on the Gurson–Tvergaard–Needleman fracture model

D. Qian, Zhong Zhou, S. Bhamare, 2014, International Journal of Fracture.

A multi-temporal scale approach to high cycle fatigue simulation

D. Qian, S. Spottswood, T. Eason, 2013, Computational Mechanics.

Improving the Mechanical Properties of Polycarbonate Nanocomposites with Plasma‐Modified Carbon Nanofibers

M. Schulz, D. Qian, Xingping Zhou, 2006 .

A simulation study on the significant nanomechanical heterogeneous properties of collagen

M. Minary‐Jolandan, D. Qian, Zhong Zhou, 2014, Biomechanics and Modeling in Mechanobiology.

A REVIEW ON THE NUMERICAL SOLUTION SCHEMES FOR LOCALIZATION PROBLEMS

Zhen Chen, D. Qian, X. Xin, 1999 .

Surface amorphization of NiTi alloy induced by Ultrasonic Nanocrystal Surface Modification for improved mechanical properties.

D. Qian, Z. Ren, Chang Ye, 2016, Journal of the mechanical behavior of biomedical materials.

Accelerated multiscale space–time finite element simulation and application to high cycle fatigue life prediction

D. Qian, L. Wen, T. Eason, 2016, Computational Mechanics.

The Sandia Fracture Challenge: blind round robin predictions of ductile tearing

K. Ravi-Chandar, S.-P. Lin, A. R. Ingraffea, 2014, International Journal of Fracture.

A Study of Localization Problems based on the Transition between Governing Equations

D. Qian, X. Xin, Z. Chen, 1999 .

Localization-Induced Band and Cohesive Model

Su Hao, Dong Qian, Wing Kam Liu, 2000 .

Mechanics of C60 in nanotubes

Dong Qian, Rodney S. Ruoff, Wing Kam Liu, 2001 .

Elastic response of a carbon nanotube fiber reinforced polymeric composite: A numerical and experimental study

D. Qian, D. Carnahan, M. Kulkarni, 2010 .

Gradient nanostructure and residual stresses induced by Ultrasonic Nano-crystal Surface Modification in 304 austenitic stainless steel for high strength and high ductility

Zhong Zhou, D. Qian, Y. Idell, 2014 .

Effects of laser shock peening on SCC behavior of Alloy 600 in tetrathionate solution

D. Qian, V. Vasudevan, A. Telang, 2013 .

Comparison of mechanisms of advanced mechanical surface treatments in nickel-based superalloy

Hitoshi Soyama, Dong Qian, Young Shik Pyoun, 2013 .

Intrinsic elastic conductors with internal buckled electron pathway for flexible electromagnetic interference shielding and tumor ablation

Zhuangjian Liu, Zunfeng Liu, D. Qian, 2020, Science China Materials.

Mechanics of carbon nanotubes

Dong Qian, Wing Kam Liu, Rodney S. Ruoff, 2002 .

Computational Nanomechanics of Noncollagenous Interfibrillar Interface in Bone.

M. Minary‐Jolandan, D. Qian, Yang Wang, 2020, ACS applied materials & interfaces.

Artificial spider silk from ion-doped and twisted core-sheath hydrogel fibres

P. Sun, S. Fang, Zhuangjian Liu, 2019, Nature Communications.

Photothermal Bimorph Actuators with In‐Built Cooler for Light Mills, Frequency Switches, and Soft Robots

S. Fang, M. Jung de Andrade, Zunfeng Liu, 2019, Advanced Functional Materials.

Effect of laser shock peening on elevated temperature residual stress, microstructure and fatigue behavior of ATI 718Plus alloy

D. Qian, V. Vasudevan, Micheal Kattoura, 2017 .

Mechanical properties of atomically thin boron nitride and the role of interlayer interactions

R. Ruoff, Kenji Watanabe, T. Taniguchi, 2017, Nature Communications.

Somatosensitive film soft crawling robots driven by artificial muscle for load carrying and multi-terrain locomotion.

Dong Qian, Jiatian Li, Zunfeng Liu, 2021, Materials horizons.

Torsional refrigeration by twisted, coiled, and supercoiled fibers

Carter S. Haines, C. Haines, M. Lima, 2019, Science.

Effect of ultrasonic nanocrystal surface modification on elevated temperature residual stress, microstructure, and fatigue behavior of ATI 718Plus alloy

Dong Qian, Vijay K. Vasudevan, Seetha R. Mannava, 2018 .

Effect of laser shock peening on residual stress, microstructure and fatigue behavior of ATI 718Plus alloy

D. Qian, V. Vasudevan, Micheal Kattoura, 2017 .

Coupled Atomistic/Continuum Simulation based on Extended Space-Time Finite Element Method

Shardool U. Chirputkar, Dong Qian, D. Qian, 2008 .

Experimental and Finite Element Simulation Study of Thermal Relaxation of Residual Stresses in Laser Shock Peened IN718 SPF Superalloy

D. Qian, V. Vasudevan, A. Telang, 2014, Experimental Mechanics.

Structural Technology Evaluation Analysis Program (STEAP). Task Order 0029: Thermal Stability of Fatigue Life-Enhanced Structures

Zhong Zhou, D. Qian, G. Ramakrishnan, 2012 .

A finite element study of thermal relaxation of residual stress in laser shock peened IN718 superalloy

D. Qian, Y. Wen, V. Vasudevan, 2011 .

Simulation-based prediction of cyclic failure in rubbery materials using nonlinear space-time finite element method coupled with continuum damage mechanics

Dong Qian, Shogo Wada, Vijay K. Vasudevan, 2018 .

Computational Nanomechanics of Materials

Wing Kam Liu, S. Jun, D. Qian, 2008 .

Application of laser shock peening for spinal implant rods

Dong Qian, Richard D. Tenaglia, Vijay K. Vasudevan, 2011 .

Design of Dynamic and Fatigue‐Strength‐Enhanced Orthopedic Implants

D. Qian, V. Vasudevan, S. Mannava, 2013 .

A meshfree contact-detection algorithm

Ted Belytschko, Shaofan Li, Dong Qian, 2001 .

A multi-temporal scale approach to high cycle fatigue simulation

S. M. Spottswood, Dong Qian, Thomas Eason, 2014 .

Continuum-based and cluster models for nanomaterials

D. Qian, K. Nagarajan, V. Vasudevan, 2007 .

Tensile Properties and Fracture Behavior of ATI 718Plus Alloy at Room and Elevated Temperatures

D. Qian, G. Viswanathan, V. Vasudevan, 2021, Metallurgical and Materials Transactions A.

Molecule‐Induced Conformational Change in Boron Nitride Nanosheets with Enhanced Surface Adsorption

R. Ruoff, T. Taniguchi, D. Qian, 2016, 1612.02883.

FOLDING MECHANICS OF BI-LAYER GRAPHENE SHEET

R. Ruoff, D. Qian, V. Vasudevan, 2012 .

A multiscale projection method for the analysis of carbon nanotubes

Gregory J. Wagner, Dong Qian, Wing Kam Liu, 2004 .

Effect of the impact energy of various peening techniques on the induced plastic deformation region

D. Qian, O. Takakuwa, H. Soyama, 2012 .

A time‐discontinuous peridynamic method for transient problems involving crack propagation

D. Qian, Hongwu W. Zhang, Zhenhai Liu, 2020, International Journal for Numerical Methods in Engineering.

Multi-physics simulation of metal printing at micro/nanoscale using meniscus-confined electrodeposition: Effect of nozzle speed and diameter

Zhong Zhou, Salvador Moreno, Dong Qian, 2017 .

Mechanisms of Localized Pulsed Electrodeposition (L-PED) for Microscale 3D Printing of Nanotwinned Metals

M. Minary‐Jolandan, D. Qian, Reza Morsali, 2019, Journal of The Electrochemical Society.

Strong, Twist‐Stable Carbon Nanotube Yarns and Muscles by Tension Annealing at Extreme Temperatures

Na Li, Carter Haines, Dong Qian, 2016, Advanced materials.

Multiscale simulations and mechanics of biological materials

Shaofan Li, Dong Qian, Shaofan Li, 2013 .

Mechanical Properties of Atomically Thin Tungsten Dichalcogenides: WS2, WSe2, and WTe2.

K. Novoselov, D. Qian, M. Barnett, 2021, ACS nano.

A simulation study on the significant nanomechanical heterogeneous properties of collagen

M. Minary‐Jolandan, D. Qian, Zhong Zhou, 2014, Biomechanics and Modeling in Mechanobiology.

Simulation-based optimization of laser shock peening process for improved bending fatigue life of Ti–6Al–2Sn–4Zr–2Mo alloy

D. Qian, G. Ramakrishnan, V. Vasudevan, 2013 .

Metamaterial-like aerogels for broadband vibration mitigation.

Mohammad I. Hatamleh, S. Malakooti, D. Qian, 2021, Soft matter.

Bioinspired Multifunctional Ceramic Platelet‐Reinforced Piezoelectric Polymer Composite

Zhong Zhou, M. Minary‐Jolandan, R. Baughman, 2017 .

Energy Loss in Carbon Nanotube Beam Oscillators due to Anelastic Relaxation

D. Qian, V. Vasudevan, Zhong Zhou, 2012 .

Molecular Mechanism of Polarization and Piezoelectric Effect in Super-Twisted Collagen.

M. Minary‐Jolandan, D. Qian, Zhong Zhou, 2016, ACS biomaterials science & engineering.

Localized plastic deformation and hardening in laser shock peened Inconel alloy 718SPF

D. Qian, Chang Ye, V. Vasudevan, 2018, Materials Characterization.

Multiscale simulation of nanostructures based on spatial secant model: a discrete hyperelastic approach

Dong Qian, Qingjin Zheng, Rodney S. Ruoff, 2008 .

Multi-physics simulation of metal printing at micro/nanoscale using meniscus-confined electrodeposition: Effect of environmental humidity

Zhong Zhou, Dong Qian, Ali Behroozfar, 2017 .

Layer-Dependent Mechanical Properties and Enhanced Plasticity in the Van der Waals Chromium Trihalide Magnets

D. Qian, M. Barnett, T. Tao, 2020, Nano letters.

An efficient solution algorithm for space–time finite element method

Rui Zhang, Dong Qian, Jinyou Xiao, 2018, Computational Mechanics.

Accelerated multiscale space–time finite element simulation and application to high cycle fatigue life prediction

Rui Zhang, Dong Qian, Thomas Eason, 2016 .

Bridging scale simulation of lattice fracture using enriched space‐time Finite Element Method

Dong Qian, Shardool U. Chirputkar, D. Qian, 2014 .

Enriched space–time finite element method: a new paradigm for multiscaling from elastodynamics to molecular dynamics

S. M. Spottswood, Thomas Eason, Dong Qian, 2012 .

Bent and kinked multi-shell carbon nanotubes - Treating the interlayer potential more realistically

Dong Qian, Rodney S. Ruoff, Wing Kam Liu, 2002 .

What kind of carbon nanofiber is ideal for structural applications

Dong Qian, Rodney S. Ruoff, Xinqi Chen, 2002 .

Designing bioinspired brick-and-mortar composites using machine learning and statistical learning

M. Minary‐Jolandan, D. Qian, S. Morsali, 2020, Communications Materials.

Multiscale methods for mechanical science of complex materials: Bridging from quantum to stochastic multiresolution continuum

Wei Chen, Shaofan Li, Stefano Gonella, 2010 .

Application of a Discrete Model for the Concurrent Simulation of Nanostructures

D. Qian, Rohit H. Gondhalekar, 2005 .

A high-performance multiscale space-time approach to high cycle fatigue simulation based on hybrid CPU/GPU computing

Dong Qian, Rui Zhang, Thomas Eason, 2019, Finite Elements in Analysis and Design.

Concurrent approach to lattice dynamics based on extended space-time finite element method

Shardool U. Chirputkar, D. Qian, 2013 .

Locked twist in multiwalled carbon-nanotube ribbons

Mark J. Dyer, Dong Qian, Rodney S. Ruoff, 2001 .

Harvesting Temperature Fluctuations as Electrical Energy Using Torsional and Tensile Polymer Muscles

Ray H. Baughman, John D. W. Madden, Changsoon Choi, 2015 .

Effective Models for Prediction of Springback in Flanging

Jian Cao, Wing Kam Liu, Dong Qian, 2000, Manufacturing Engineering.

Finite Element Study of Laser Peening on Selective Laser Melted A357 Aluminum Alloy During Tension Test

Mohammad I. Hatamleh, D. Qian, A. Malik, 2018, Volume 4: Processes.

Variable Damping Profiles Using Modal Analysis for Laser Shock Peening Simulation

Mohammad I. Hatamleh, D. Qian, A. Malik, 2018 .

Coarse‐grained modeling and simulation of graphene sheets based on a discrete hyperelastic approach

D. Qian, Qingjin Zheng, Zhong Zhou, 2015 .

Effects of Ultrasonic Nanocrystal Surface Modification on the Residual Stress, Microstructure, and Corrosion Resistance of 304 Stainless Steel Welds

D. Qian, Chang Ye, V. Vasudevan, 2018, Metallurgical and Materials Transactions A.

Mechano-kinetic coupling approach for materials with dynamic internal structure

Eduard G. Karpov, Dong Qian, Wing Kam Liu, 2010 .

Modeling the Compressive Buckling Strain as a Function of the Nanocomposite Interphase Thickness in a Carbon Nanotube Sheet Wrapped Carbon Fiber Composite

Samit Roy, R. Baughman, D. Qian, 2019, Journal of Applied Mechanics.

Controllable Preparation of Ordered and Hierarchically Buckled Structures for Inflatable Tumor Ablation, Volumetric Strain Sensor, and Communication via Inflatable Antenna.

S. Fang, R. Baughman, Mei Zhang, 2019, ACS applied materials & interfaces.

Influence of Zr Additions on Shape-Memory Effect and Mechanical Properties of Ni-Rich NiTi Alloys

D. Qian, B. Gao, J. Wang, 2002 .

Deformation Mechanisms of "Two-Part" Natural Adhesive in Bone Interfibrillar Nano-Interfaces.

M. Minary‐Jolandan, D. Qian, Yang Wang, 2019, ACS biomaterials science & engineering.

Clustering of hydroxyapatite on a super-twisted collagen microfibril under mechanical tension.

M. Minary‐Jolandan, D. Qian, Zhong Zhou, 2017, Journal of materials chemistry. B.

Multiscale meshfree method for the analysis of carbon nanotube-based materials

D. Qian, 2003 .

Mechanical properties of carbon nanotubes: theoretical predictions and experimental measurements

R. Ruoff, D. Qian, Kam Wing, 2003 .

Strong, Twist‐Stable Carbon Nanotube Yarns and Muscles by Tension Annealing at Extreme Temperatures

Carter S. Haines, Na Li, S. Fang, 2016, Advanced materials.

Ultrafast Pulsed Laser Induced Nanocrystal Transformation in Colloidal Plasmonic Vesicles

P. Kang, J. Randrianalisoa, Zhenpeng Qin, 2018, Advanced Optical Materials.

Residual stress prediction in laser shock peening based on finite element analysis and mechanical threshold stress model

D. Qian, V. Vasudevan, 2012 .

Clustering of hydroxyapatite on a super-twisted collagen microfibril under mechanical tension.

M. Minary‐Jolandan, D. Qian, Zhong Zhou, 2017, Journal of materials chemistry. B.

UNIVERSITY OF CINCINNATI

D. Qian, Yijun Liu, M. Phadke, 2006 .

A Constitutive Model for Nanomaterials Based on Spatial Secant

D. Qian, Rohit H. Gondhalekar, 2006 .

Photothermal Actuators: Photothermal Bimorph Actuators with In-Built Cooler for Light Mills, Frequency Switches, and Soft Robots (Adv. Funct. Mater. 27/2019)

S. Fang, Zunfeng Liu, D. Qian, 2019, Advanced Functional Materials.