D. Bahr

C. Richards, R. Richards, D. Bahr, 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

Probing the Effect of Hydrogen on Elastic Properties and Plastic Deformation in Nickel Using Nanoindentation and Ultrasonic Methods

D. Bahr, B. Somerday, M. Ingraham, 2018 .

4354 - DEFORMATION BEHAVIOR IN MATERIALS SUSCEPTIBLE TO HYDROGEN EMBRITTLEMENT

D. Bahr, B. Somerday, K. Nibur, 2013 .

The effects of residual stress on modulus measurements by indentation

D. Bahr, W. Gerberich, D. Crowson, 1997 .

Probing the Strain Hardening Response of Small Wear Volumes with Nanoindentation

N. Moody, D. Bahr, W. Gerberich, 2011 .

Predictions of decreased surface roughness after shot peening using controlled media dimensions

D. Bahr, Siavash Ghanbari, 2020 .

Residual Stress Asymmetry in Thin Sheets of Double-Sided Shot Peened Aluminum

M. Sangid, D. Bahr, Siavash Ghanbari, 2019, Journal of Materials Engineering and Performance.

Thermocompression bonding of vertically aligned carbon nanotube turfs to metalized substrates

J. Jiao, C. Richards, R. Richards, 2009, Nanotechnology.

Evaluation of a thermal interface material fabricated using thermocompression bonding of carbon nanotube turf

J. Jiao, C. Richards, R. Richards, 2010, Nanotechnology.

Improved electro-mechanical performance of gold films on polyimide without adhesion layers

D. Bahr, M. J. Cordill, B. Putz, 2015, Scripta materialia.

Hardening Particulate Ti Media Through Controlled Oxidation

D. Bahr, D. A. Brice, R. M. Rahimi, 2019, Metallurgical and Materials Transactions A.

Film Thickness Effects on Interfacial Fracture of Epoxy Bonds

N. Moody, D. Bahr, M. Kent, 2001 .

Relationships Between Microstructure and Reliability in Pzt Mems

C. Richards, R. Richards, D. Bahr, 2001 .

Adhesive properties of some fluoropolymer binders with the insensitive explosive 1,3,5-triamino-2,4,6-trinitrobenzene (TATB).

E. B. Orler, D. Bahr, D. Dattelbaum, 2010, Journal of colloid and interface science.

Length-scale-based hardening model for ultra-small volumes

N. Moody, D. Bahr, W. Gerberich, 2004 .

Variation in the nanoindentation hardness of platinum

H. Zbib, D. Bahr, M. Maughan, 2013 .

Elevated temperature dependence of hardness in tri-metallic nano-scale metallic multilayer systems

H. Zbib, D. Bahr, N. Abdolrahim, 2014 .

Thermal stability and strength of Mo/Pt multilayered films

D. Bahr, L. Scudiero, A. Bellou, 2010 .

Deformation mechanisms and strength in nanoscale multilayer metallic composites with coherent and incoherent interfaces

I. Mastorakos, H. Zbib, D. Bahr, 2009 .

Phenomenological constitutive model for a CNT turf

D. Bahr, A. Qiu, S. Mesarovic, 2013 .

Mechanical behavior of a carbon nanotube turf

J. Jiao, C. Richards, R. Richards, 2007 .

Thin-film fracture during nanoindentation of a titanium oxide film–titanium system

D. Bahr, M. Pang, 2001 .

Nisin infusion into surface cracks in oxide coatings to create an antibacterial metallic surface.

D. Bahr, L. Stanciu, Susana Díaz-Amaya, 2019, Materials science & engineering. C, Materials for biological applications.

Fracture of polycrystalline silicon

D. Bahr, R. Brodie, 2003 .

Effect of accelerated aging on dental zirconia-based materials.

D. Bahr, G. de Souza, S. Lawrence, 2017, Journal of the mechanical behavior of biomedical materials.

Microstructural characterization of thin gold films on a polyimide substrate

D. Bahr, J. Yeager, 2010 .

Elastic behavior of a core–shell metal–carbon nanotube composite foam

D. Bahr, M. Guinel, Kassiopeia A. Smith, 2014 .

Substrate cracking in Ti-6Al-4V driven by pulsed laser irradiation and oxidation

D. Bahr, H. Espejo, 2017 .

New Insights into Nanoindentation-Based Adhesion Testing

N. Moody, D. Bahr, M. J. Cordill, 2017 .

Environmental resistance of oxide tags fabricated on 304L stainless steel via nanosecond pulsed laser irradiation

N. Moody, D. Bahr, D. Adams, 2016 .

Interfacial Fracture in Compliant Substrate Film Systems.

N. Moody, D. Bahr, D. Adams, 2008 .

Adhesive Failure of a Thin Epoxy Film on an Aluminized Substrate

N. Moody, D. Bahr, M. Kent, 2000 .

Development of experimental verification techniques for non-linear deformation and fracture.

N. Moody, D. Bahr, 2003 .

An energy-based nanoindentation method to assess localized residual stresses and mechanical properties on shot-peened materials

D. Bahr, Siavash Ghanbari, 2019, Journal of Materials Research.

Synthesis, microstructure, and mechanical properties of polycrystalline Cu nano-foam

I. Mastorakos, D. Bahr, C. E. Kim, 2018 .

Crack incubation in shot peened AA7050 and mechanism for fatigue enhancement

M. Sangid, D. Bahr, D. Chadwick, 2018 .

Nanomechanics and Testing of Core-Shell Composite Ligaments for High Strength, Light Weight Foams

Jessica M. Andriolo, D. Bahr, J. Skinner, 2017 .

The role of probe shape on the initiation of metal plasticity in nanoindentation

L. Levine, D. Bahr, Li Ma, 2012 .

Nanomechanical properties of teflon amorphous fluoropolymer -MWCNT bilayer films

N. Moody, D. Bahr, W. Gerberich, 2012 .

Effect of the Spherical Indenter Tip Assumption on the Initial Plastic Yield Stress

L. Levine, D. Bahr, Li Ma, 2012 .

Fracture Behavior of Granular Polycrystalline Silicon Using Micro-scale and Macro-scale Indentation Techniques

D. Bahr, M. B. Zbib, Mohamad B. Zbib, 2014 .

Effect of solute hydrogen on toughness of feedstock polycrystalline silicon for solar cell applications

M. G. Norton, D. Bahr, M. B. Zbib, 2012 .

The effect of interfacial imperfections on plastic deformation in nanoscale metallic multilayer composites

I. Mastorakos, H. Zbib, D. Bahr, 2014 .

The nanomechanical behavior of a graphite nanoplatelet/polycarbonate nanocomposite

D. Bahr, W. Zhong, Tian Liu, 2015 .

Development of experimental verification techniques for non-linear deformation and fracture on the nanometer scale.

N. Moody, D. Bahr, 2005 .

Observation of pseudoelastic behavior in large Cu-Ni composite multilayer nanowires

I. Mastorakos, H. Zbib, D. Bahr, 2014 .

The role of density in the mechanical response of CNT turfs

D. Bahr, A. Qiu, 2013 .

Time-dependent contact behavior between diamond and a CNT turf

J. Jiao, D. Bahr, A. Qiu, 2011, Nanotechnology.

Strengthening mechanisms in nanoporous alloy foams with a hierarchical structure

D. Bahr, A. Loaiza, J. Tsai, 2022, Journal of Materials Science.

Adhesion Thin Ductile Films Using Stressed Overlayers and Nanoindentation

N. Moody, D. Bahr, M. Cordill, 2002 .

Dislocation Activity Under Nanoscale Contacts Prior to Discontinuous Yield

D. Bahr, M. Maughan, 2015 .

Enhanced hardness in epitaxial TiAlScN alloy thin films and rocksalt TiN/(Al,Sc)N superlattices

T. Sands, D. Bahr, Bivas Saha, 2014 .

The Mechanical Response of Arrays of Carbon Nanotubes Coated with Metallic Shells

D. Bahr, T. Balk, M. Maughan, 2018, MRS Advances.

Conformal Coating of Metallic Shells on Carbon Nanotube Turfs

D. Bahr, T. Balk, M. Maughan, 2018, MRS Advances.

Deformation mechanisms, size effects, and strain hardening in nanoscale metallic multilayers under nanoindentation

I. Mastorakos, H. Zbib, D. Bahr, 2012 .

Dislocation nucleation and multiplication in small volumes: The onset of plasticity during indentation testing

D. Bahr, D. Morris, S. L. Jennerjohn, 2009 .

Mechanical measurements of passive film fracture on an austenitic stainless steel

D. Bahr, M. Pang, D. Rodriguez-Marek, 2003 .

Friction measurement in MEMS using a new test structure

T. Michalske, J. Redmond, D. Bahr, 1999 .

Environmental effects on the adhesion of gold microcircuit films

N. Moody, D. Bahr, N. Yang, 2005 .

The Kinetics of Anodic Dissolution and Repassivation on Stainless Steel 304L in Solutions Containing Nitrate

D. Bahr, R. Lillard, G. Vasquez, 2011 .

Environmentally Induced Failure of Gold Jewelry Alloys

M. G. Norton, D. Bahr, C. C. Merriman, 2005 .

Multi-Scale Analyses and Modeling of Metallic Nano-Layers

D. Bahr, Zara Moleinia, 2021, Materials.

Examination of crystal defects with high-kV X-ray computed tomography

M. G. Norton, D. Bahr, J. B. Lebret, 2005 .

An energy method to analyze through thickness thin film fracture during indentation

D. Bahr, K. Morasch, 2007 .

Indentation Induced Through Thickness Film Fracture on Engineering Alloys

D. Bahr, A. Alamr, K. Morasch, 2006 .

Mechanical behavior of a MEMS acoustic emission sensor

John S. Wright, L. Francis, N. Moody, 1996 .

The impact of a variety of point defects on the inception of plastic deformation in dislocation-free metals

D. Bahr, I. Salehinia, 2012 .

The effect of crystal orientation on the stochastic behavior of dislocation nucleation and multiplication during nanoindentation

D. Bahr, S. Lawrence, I. Salehinia, 2013 .

Inception of plasticity in the presence of vacancies in FCC single crystals: indenter size effect

D. Bahr, I. Salehinia, M. Weber, 2011 .

Failure of PZT Thin Films and Membranes in MEMS

C. Richards, R. Richards, D. Bahr, 2007 .

Grain growth and mechanical properties in bulk polycrystalline silicon

M. G. Norton, D. Bahr, R. W. Fancher, 2001 .

Dislocations in yttrium orthovanadate

M. G. Norton, D. Bahr, D. Eakins, 2004 .

Mechanical and Electrical Performance of Thermally Stable Au-ZnO films

N. Moody, D. Bahr, R. Goeke, 2015 .

The effects of hydrogen on deformation and cross slip in a BCC titanium alloy

D. Bahr, K. Morasch, 2001 .

Localized Deformation Around Indentations and the Effects of Hydrogen on Dislocation Cross‐Slip

D. Bahr, K. Nibur, 2013 .

Microstructure–mechanical and chemical behavior relationships in passive thin films

M. G. Norton, D. Bahr, R. Yassar, 2010 .

Effects of alloy and solution chemistry on the fracture of passive films on austenitic stainless steel

M. Jacroux, D. Bahr, A. Alamr, 2006 .

Examining chemical structure at the interface between a polymer binder and a pharmaceutical crystal with neutron reflectometry

D. Bahr, J. Majewski, J. Yeager, 2011 .

Thermal and mechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/cellulose nanowhiskers composites

M. Wolcott, D. Bahr, Long Jiang, 2010 .

Crystal orientation effect on dislocation nucleation and multiplication in FCC single crystal under uniaxial loading

David F. Bahr, D. Bahr, I. Salehinia, 2014 .

Hydrogen effects on dislocation activity in austenitic stainless steel

D. Bahr, B. Somerday, K. Nibur, 2006 .

Grain Boundary Contributions to Hydrogen-Affected Plasticity in Ni-201

N. Moody, D. Bahr, B. Somerday, 2014 .

Structural and Mechanical Characteristics of Anodic Oxide Films on Titanium

M. G. Norton, D. Bahr, D. Eakins, 2001 .

Film Fracture Phenomena During Indentation

D. Bahr, M. Pang, D. Rodriguez-Marek, 2000 .

Effects of alloy and solution chemistry on the fracture of anodic films formed at metastable pitting potentials

M. Jacroux, D. Bahr, A. Alamr, 2005 .

Non-linear deformation mechanisms during nanoindentation

D. Bahr, W. Gerberich, D. Kramer, 1998 .

Nanomechanical testing for fracture of oxide films

D. Bahr, K. Morasch, David F. Bahr, 2005 .

The Strength and Fracture of Passive Oxide Films on Metals

D. Bahr, M. Pang, D. Wilson, 1999 .

Indentation fracture behavior of energetic and inert molecular crystals

Alexandra C. Burch, D. Bahr, J. Yeager, 2019, Journal of Materials Research.

Defect and surface asperity dependent yield during contact loading of an organic molecular single crystal

D. Bahr, K. Ramos, D. Hooks, 2011 .

Direct observation of plasticity and quantitative hardness measurements in single crystal cyclotrimethylene trinitramine by nanoindentation

D. Bahr, K. Ramos, D. Hooks, 2009 .

A study of fracture and defects in single crystal YAG

M. G. Norton, D. Bahr, D. Eakins, 2004 .

The influence of cellulose nanocrystals on the microstructure of cement paste

Pablo D. Zavattieri, David F. Bahr, Nannan Tian, 2016 .

Mechanical deformation of PZT thin films for MEMS applications

John S. Wright, L. Francis, D. Bahr, 1999 .

Effects of Cellulose Nanowhiskers on Mechanical, Dielectric, and Rheological Properties of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/Cellulose Nanowhisker Composites

M. Wolcott, D. Bahr, Long Jiang, 2012 .

Analysis of heterogeneous deformation and dislocation dynamics in single crystal micropillars under compression

Hussein M. Zbib, David F. Bahr, H. Zbib, 2010 .

Adhesion and acoustic emission analysis of failures in nitride films with a metal interlayer

David F. Bahr, Neville Reid Moody, N. Moody, 1997 .

Wear behavior of Au–ZnO nanocomposite films for electrical contacts

N. Moody, D. Bahr, S. Prasad, 2014, Journal of Materials Science.

The effects of intrinsic properties and defect structures on the indentation size effect in metals

D. Bahr, M. Maughan, D. Stauffer, 2017 .

Analysis of plastic deformation in nanoscale metallic multilayers with coherent and incoherent interfaces

Hussein M. Zbib, Firas Akasheh, David F. Bahr, 2011 .

Molecular dynamics simulations of plastic deformation in Nb/NbC multilayers

Hussein M. Zbib, Jian Wang, David F. Bahr, 2014 .

Quantifying improvements in adhesion of platinum films on brittle substrates

N. Moody, D. Bahr, M. Cordill, 2004 .

The mechanical behavior of a passivating surface under potentiostatic control

D. Bahr, W. Gerberich, J. Nelson, 1997 .

Effect of in and Out of Plane Stresses During Indentation of Diamond Films on Metal Substrates

D. Bahr, W. Gerberich, 1996 .

Identifying slip systems around indentations in FCC metals

D. Bahr, K. Nibur, 2003 .

Analysis of dislocation mechanisms around indentations through slip step observations

D. Bahr, F. Akasheh, K. Nibur, 2007 .

Hydrogen and deformation: Nano- and microindentation studies

D. Bahr, K. Nibur, D. Field, 2003 .

Nanoindentation and orientation imaging: Probing small volumes and thin films for mechanical properties

D. Bahr, K. Nibur, K. Morasch, 2002 .

Indentation Techniques for the Study of Deformation Across Grain Boundaries

D. Bahr, K. Nibur, 2003 .

Nanoindentation-induced defect-interface interactions: Phenomena, methods and limitations

D. Bahr, A. Volinsky, W. Gerberich, 1999 .

Plastic zone and pileup around large indentations

D. Bahr, W. Gerberich, 1996 .

A stochastic crystal plasticity framework for deformation of micro-scale polycrystalline materials

Michael R. Maughan, Hussein M. Zbib, David F. Bahr, 2015 .

Effect of thermal treatment on failure modes in tungsten wire

M. G. Norton, D. Bahr, P. Bourque, 2001 .

Flow-induced bending deformation of electrospun polymeric filtration membranes using the “leaky” bulge test

D. Bahr, Temitope Q. Aminu, 2021, Polymer.

Strength and strain hardening behavior of Cu-based bilayers and trilayers

H. Zbib, D. Bahr, A. Misra, 2011 .

Challenges Below the Grain Scale and Multiscale Models

Hussein M. Zbib, David F. Bahr, H. Zbib, 2011 .

Nanoindentation: Localized Probes of Mechanical Behavior of Materials

D. Bahr, D. Morris, 2008 .

Mechanical behavior assessment of sucrose using nanoindentation

D. Bahr, K. Ramos, David F. Bahr, 2007 .

8.13 – Nanoindentation Methods in Interfacial Fracture Testing

N. Moody, D. Bahr, A. Volinsky, 2003 .

NanoindentationMethodsin Interfacial FractureTesting

N. Moody, D. Bahr, M. Kriese, 2003 .

Yield strength predictions from the plastic zone around nanocontacts

D. E. Kramer, John D. Nelson, David F. Bahr, 1998 .

Adhesion evaluation of CVD diamond films and metal reinforced composite diamond films

E. Pfender, D. Bahr, J. Heberlein, 1995 .

Elastic loading and elastoplastic unloading from nanometer level indentations for modulus determinations

D. Bahr, W. Gerberich, E. Lilleodden, 1998 .

Discontinuous Yield Behaviors Under Various Pre-Strain Conditions in Metals with Different Crystal Structures

D. Bahr, M. Maughan, 2016 .

Plastic Zone Development Around Nanoindentations

N. Moody, D. Bahr, C. Woodcock, 2000 .

Establishing a Cold Spray Particle Deposition Window on Polymer Substrate

F. Zhou, D. Bahr, M. Jun, 2021, Journal of Thermal Spray Technology.

Damage of the cell wall during extrusion and injection molding of wood plastic composites

M. Wolcott, D. Bahr, W. Gacitúa, 2010 .

Well-Adhered Copper Nanocubes on Electrospun Polymeric Fibers

D. Bahr, J. Skinner, Temitope Q. Aminu, 2020, Nanomaterials.

Nanoindentation of HMX and Idoxuridine to Determine Mechanical Similarity

Alexandra C. Burch, D. Bahr, J. Yeager, 2017 .

A resonant frequency tunable, extensional mode piezoelectric vibration harvesting mechanism

Michael J. Anderson, David F. Bahr, Dylan J. Morris, 2008 .

Nanomechanics of hard films on compliant substrates.

N. Moody, D. Bahr, D. Adams, 2009 .

Environmental influence on interface interactions and adhesion of Au/SiO2

N. Moody, D. Bahr, M. Clift, 2008 .

The Effect of Nonuniform Chemistry on Interfacial Fracture Toughness

N. Moody, D. Bahr, M. S. Kennedy, 2007 .

The aging of metallic thin films: Delamination, strain relaxation, and diffusion

N. Moody, D. Bahr, M. S. Kennedy, 2007 .

Reliability of materials in MEMS : residual stress and adhesion in a micro power generation system.

N. Moody, D. Bahr, M. S. Kennedy, 2007 .

Effect of nanoscale patterned interfacial roughness on interfacial toughness.

N. Moody, J. Zimmerman, D. Bahr, 2007 .

The Role of Adhesion and Fracture on the Performance of Nanostructured Films

N. Moody, D. Bahr, D. Adams, 2006 .

Recent developments in thin film adhesion measurement

N. Moody, D. Bahr, W. Gerberich, 2004, IEEE Transactions on Device and Materials Reliability.

Effect of solid solution impurities on dislocation nucleation during nanoindentation

D. Bahr, G. Vasquez, 2005 .

Individual phase deformation and flow correlation to macroscopic constitutive properties of DP1180 steel

D. Bahr, R. M. Rahimi, 2019, Materials Science and Engineering: A.

Stochastic effects in plasticity in small volumes

Guang Lin, Shuai Shao, Hussein M. Zbib, 2014 .

Atomistic simulations of nanoindentation in the presence of vacancies

D. Bahr, E. K. Njeim, 2010 .

Electronic structure and surface properties of MgB 2 (0001) upon oxygen adsorption

D. Bahr, V. Lordi, C. E. Kim, 2018 .

Role of ripples in altering the electronic and chemical properties of graphene.

A. Walsh, D. Bahr, V. Lordi, 2022, The Journal of chemical physics.

Efficiency of energy conversion for devices containing a piezoelectric component

Michael J. Anderson, Robert F. Richards, David F. Bahr, 2004 .

Nanoindentation Evaluation of Passive Film Stress and Growth Kinetics

D. Bahr, W. Gerberich, J. Nelson, 1998 .

Microindentation method for in situ stress measurements in precipitated iron sulfate FILMS

D. Bahr, W. Gerberich, J. Nelson, 1998 .

Influence of Nitrate on Pit Stability in Austenitic Stainless Steel

D. Bahr, R. Lillard, G. Vasquez, 2010 .

Characterization of d.c.jet CVD diamond films on molybdenum

E. Pfender, D. Bahr, L. Schadler, 1996 .

Uncovering the Thermo-Kinetic Origins of Phase Ordering in Mixed-Valence Antimony Tetroxide by First-Principles Modeling.

C. Stampfl, D. Bahr, A. Soon, 2017, Inorganic chemistry.

Statistical Quantification of the Impact of Surface Preparation on Yield Point Phenomena in Nickel

H. Zbib, D. Bahr, S. Wurster, 2014, Metallurgical and Materials Transactions A.

Effect of vacancies on incipient plasticity during contact loading

D. Bahr, I. Salehinia, V. Perez, 2012 .

The coordinated buckling of carbon nanotube turfs under uniform compression

J. Jiao, D. Bahr, S. Mesarovic, 2008, Nanotechnology.

The void nucleation strengths of the Cu–Ni–Nb- based nanoscale metallic multilayers under high strain rate tensile loadings

I. Mastorakos, H. Zbib, D. Bahr, 2014 .

Characterization of flexible ECoG electrode arrays for chronic recording in awake rats

D. Bahr, D. Rector, Derrick J. Phillips, 2008, Journal of Neuroscience Methods.

The structure and mechanical properties of Cu_50Ni_50 alloy nanofoams formed via polymeric templating

D. Bahr, Chang-Eun Kim, R. M. Rahimi, 2020, MRS Communications.

Dislocation Nucleation and Source Activation during Nanoindentation Yield Points

D. Bahr, A. A. Zbib, 2007 .

Nanoindentation of Compliant Substrate Systems: Effects of Geometry and Compliance

N. Moody, D. Bahr, D. Adams, 2010 .

Layer thickness dependent strain rate sensitivity of Cu/amorphous CuNb multilayer

D. Bahr, Xinghang Zhang, S. Xue, 2017 .

Microstructure and grain growth of polycrystalline silicon grown in fluidized bed reactors

M. G. Norton, D. Bahr, M. Dahl, 2009 .

Coupling bulge testing and nanoindention to characterize materials properties of bulk micromachined structures

N. Moody, D. Bahr, A. Olson, 2005 .

Optimization of Thermal Processing and Chemistry in the Fabrication of a PZT Based Mems Power Generator

C. Richards, R. Richards, D. Bahr, 2002 .

Crystallographic orientation and indenter radius effects on the onset of plasticity during nanoindentation

H. Zbib, D. Bahr, S. Lawrence, 2012 .

A Microscopy Study on the Origin of Asterism in Almandine-Pyrope Garnets

M. G. Norton, D. Bahr, M. Guinel, 2005, Microscopy and Microanalysis.

Indentation Response of Nanostructured Turfs

J. Jiao, D. Bahr, S. Mesarovic, 2007 .

Mechanical compliance of photolithographically defined vertically aligned carbon nanotube turf

J. Jiao, C. Richards, R. Richards, 2006 .

Modification of the mechanical properties of carbon nanotube arrays using electron irradiation induced oxidation

D. Bahr, A. Qiu, 2014, Meccanica.

Modification of the mechanical properties of carbon nanotube arrays using electron irradiation induced oxidation

D. Bahr, A. Qiu, 2014, Meccanica.

Effects of applied strain on pileup morphology during quasi-static and dynamic nanoindentation of cyclic olefin copolymers

D. Bahr, Nannan Tian, 2015 .

Application of oxidized metallic surfaces as a medium to store biochemical agents with antimicrobial properties

D. Bahr, H. Espejo, 2019, Surface and Coatings Technology.

The mechanical response of core-shell structures for nanoporous metallic materials

H. Zbib, D. Bahr, T. Balk, 2013 .

Mechanical and electromechanical behavior of oxide coatings grown on stainless steel 304L by nanosecond pulsed laser irradiation

David P. Adams, David F. Bahr, Neville Reid Moody, 2013 .

Deformation and fracture of a mudflat-cracked laser-fabricated oxide on Ti

N. Moody, D. Bahr, D. Adams, 2012, Journal of Materials Science.

Deformation and fracture of oxides fabricated on 304L stainless steel via pulsed laser irradiation

N. Moody, D. Bahr, D. Adams, 2012 .

Effect of Diameter on Electron Field Emission of Carbon Nanotube Bundles

Robert F. Richards, David F. Bahr, Cecilia D. Richards, 2005 .

Characterization and modeling of a microcapillary driven liquid–vapor phase-change membrane actuator

Robert F. Richards, C. D. Richards, David F. Bahr, 2007 .

Lumped Parameter Analysis of an Enclosed Incompressible Squeeze Film and a Central Gas Bubble

C. Richards, R. Richards, D. Bahr, 2008 .

Power production by a dynamic micro heat engine with an integrated thermal switch

Leland Weiss, Jeong Hyun Cho, Robert F. Richards, 2007 .

Pseudoelastic behavior of Cu–Ni composite nanowires

I. Mastorakos, H. Zbib, D. Bahr, 2009 .

Electrostatic shielding in patterned carbon nanotube field emission arrays

Robert F. Richards, David F. Bahr, Cecilia D. Richards, 2007 .

Precipitate strengthening and thermal stability in three component metallic nanolaminate thin films

H. Zbib, D. Bahr, J. Michler, 2018 .

The Effects of Copper on the Interfacial Failure of Gold Films

N. Moody, D. Bahr, N. Yang, 2001 .

Measurement methods for quantifying powder flowability and velocity in cold spray systems

D. Bahr, M. Jun, J. Tsai, 2023, Advanced Powder Technology.

Effects of Zn addition and thermal annealing on yield phenomena of CdTe and Cd0.96Zn0.04Te single crystals by nanoindentation

D. Bahr, K. Lynn, M. Pang, 2003 .

Energy considerations regarding yield points during indentation

David F. Bahr, D. Bahr, D. Crowson, 1999 .

The Mechanical Properties of Minimally Processed RDX

D. Bahr, M. Taw, 2017 .

A Thermal and Nanomechanical Study of Molecular Crystals as Versatile Mocks for Pentaerythritol Tetranitrate

Alexandra C. Burch, D. Bahr, J. Yeager, 2020, Crystals.

The mechanical properties of as-grown noncubic organic molecular crystals assessed by nanoindentation

D. Bahr, J. Yeager, Teresa M. Carvajal, 2017 .

Shock engineering the additive manufactured graphene-metal nanocomposite with high density nanotwins and dislocations for ultra-stable mechanical properties

G. Cheng, D. Bahr, D. Lin, 2018 .

Size-dependent strength in nanolaminate metallic systems

I. Mastorakos, H. Zbib, D. Bahr, 2011 .

A Multiscale Simulation Approach for the Mechanical Response of Copper/Nickel Nanofoams With Experimental Validation

I. Mastorakos, D. Bahr, A. Loaiza, 2021, Journal of Engineering Materials and Technology.

Aliovalent Doping of CeBr3

M. J. Harrison, P. Ugorowski, C. Linnick, 2010, Optical Engineering + Applications.

Adhesion measurements using telephone cord buckles

David F. Bahr, Neville R. Moody, Megan J. Cordill, 2007 .

Fabrication and Characterization of Two Compliant Electrical Contacts for MEMS: Gallium Microdroplets and Carbon Nanotube Turfs

D. Bahr, A. Qiu, Yoonkap Kim, 2011 .

Probing Adhesion of Metallic Nanoparticles on Polymeric Fibrous and Flat Architectures

D. Bahr, Temitope Q. Aminu, 2018, MRS Advances.

Nanomechanical properties of ordered phthalocyanine Langmuir–Blodgett layers

K. W. Hipps, D. Bahr, U. Mazur, 2004 .

Mechanical properties of cubic zinc carboxylate IRMOF-1 metal-organic framework crystals

Mark D. Allendorf, David F. Bahr, Blake A. Simmons, 2007 .

Characterization of a dynamic micro heat engine with integrated thermal switch

Leland Weiss, Jeong Hyun Cho, Robert F. Richards, 2006 .

COMPUTATIONAL MODELING OF CARBON NANOTUBE TURFS By HARISH RADHAKRISHNAN A thesis submitted in partial fulfillment of the requirements for the degree of DOCTOR OF PHILOSOPHY

D. Bahr, A. Qiu, H. Radhakrishnan, 2012 .

Effect of Interfaces in the Work Hardening of Nanoscale Multilayer Metallic Composites During Nanoindentation: A Molecular Dynamics Investigation

I. Mastorakos, H. Zbib, D. Bahr, 2013 .

Strength and aging behavior of Mo/Pt multilayers

D. Bahr, A. Bellou, 2011 .

Fracture and deformation behavior of common and novel scintillating single crystals

F. P. Doty, D. F. Bahr, K. O. Findley, 2007, SPIE Optical Engineering + Applications.

Yield Point Phenomena During Indentation

D. Bahr, W. Gerberich, D. Kramer, 1998 .

New pulverization parameter derived from indentation and dynamic compression of brittle microspheres

N. Parab, D. Bahr, Weinong W. Chen, 2015 .

Mechanical behavior of FCC single crystals at finite temperatures in the presence of point defects

D. Bahr, I. Salehinia, 2013 .

Inception of plasticity in copper single crystal in presence of stacking fault tetrahedra

D. Bahr, I. Salehinia, 2012 .

Finite element analysis and experimental investigation of the Hertzian assumption on the characterization of initial plastic yield

L. Levine, D. Bahr, Li Ma, 2009 .

Mechanical properties of polycrystalline silicon solar cell feed stock grown via fluidized bed reactors

M. G. Norton, D. Bahr, N. Randall, 2010 .

Characterization of Silicon Nanoparticles Formed from a Fluidized Bed Reactor and Their Incorporation onto Metal-Coated Carbon Fibers

D. Bahr, U. Sahaym, Mohamad B. Zbib, 2014 .

Complementary characterization techniques for identification of ferroelectric domains in KNbO3 single crystals

D. Bahr, A. Bellou, 2008 .

Structural and electrical characterization of PZT on gold for micromachined piezoelectric membranes

R. Richards, D. Bahr, J. Cho, 2006 .

Evaporative Heat Transfer From Ten-Micron Micro-Channels

C. Richards, R. Richards, D. Bahr, 2005 .

Experimental and Numerical Study of Evaporative Heat Transfer From Ten- Micro Microchannels

C. Richards, R. Richards, D. Bahr, 2006 .

Characterization of a Liquid-Vapor Phase-Change Actuator

Robert F. Richards, C. D. Richards, David F. Bahr, 2005 .

Design, Fabrication, and Testing of a Micro Heat Engine

C. Richards, R. Richards, D. Bahr, 2002 .

The effect of size and composition on the strength and hardening of Cu–Ni/Nb nanoscale metallic composites

I. Mastorakos, D. Bahr, R. Schoeppner, 2017 .

Precipitation strengthening in nanocomposite Cr/Cu–Cr multilayer films

I. Mastorakos, H. Zbib, D. Bahr, 2015 .

Nanomechanical testing technique for millimeter-sized and smaller molecular crystals.

D. Bahr, M. Carvajal, M. Maughan, 2015, International journal of pharmaceutics.

Quantitative characterization of carbon nanotube turf topology by SEM analysis

D. Bahr, K. Stephenson, H. Malik, 2011 .

Mechanical and Electrical Reliability of a Chronically Implanted Metal-Polyimide Electrode Array

D. Bahr, D. Rector, Derrick J. Phillips, 2008 .

Dynamic Operation of a MEMS Thermal Switch

J. Jiao, C. Richards, R. Richards, 2006 .

Spatially Dependent Mechanical Properties Of Rat Whiskers For Tactile Sensing

C. Richards, R. Richards, D. Bahr, 2004 .

DEVELOPMENT OF A NOVEL METHOD FOR MEASURING THE TRANSVERSE PIEZOELECTRIC COEFFICIENTS OF THIN PIEZOELECTRIC FILMS By TIMOTHY MICHAEL SULLIVAN A thesis submitted in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE IN MATERIALS SCIENCE AND ENGINEERING

D. Bahr, T. Sullivan, 2004 .

Critical Issues in MEMS Property Measurement and Variation Measured by Nanoindentation: Error Sources and Uncertainty

D. Bahr, M. Maughan, 2022, Journal of Microelectromechanical Systems.

Antidelaminating, Thermally Stable, and Cost-Effective Flexible Kapton Platforms for Nitrate Sensors, Mercury Aptasensors, Protein Sensors, and p-Type Organic Thin-Film Transistors.

D. Peroulis, D. Bahr, Li‐Kai Lin, 2021, ACS applied materials & interfaces.

Coherent Interfaces Increase Strain-Hardening Behavior in Tri-Component Nano-Scale Metallic Multilayer Thin Films

H. Zbib, D. Bahr, J. Michler, 2015 .

Plastic zone evolution around small scale indentations

David F. Bahr, D. Bahr, C. L Woodcock, 2000 .

Relationships between acoustic emission signals and physical phenomena during indentation

David F. Bahr, D. Bahr, W. Gerberich, 1998 .

NANOINDENTATION INDUCED THIN FILM FRACTURE By KEVIN R. MORASCH A thesis submitted in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE IN MATERIALS SCIENCE AND ENGINEERING

D. Bahr, K. Morasch, 2005 .

Sb Additions in Near-Eutectic Sn-Bi Solder Decrease Planar Slip

C. Handwerker, D. Bahr, A. Loaiza, 2023, Journal of Electronic Materials.

Fabrication and Characterization of a Liquid-Metal Micro-Droplet Array for Use as a Thermal Switch

C. Richards, R. Richards, D. Bahr, 2003 .

Local and non-local behavior and coordinated buckling of CNT turfs

J. Jiao, D. Bahr, A. Qiu, 2011 .

Indentation induced film fracture in hard film – soft substrate systems

N. Moody, D. Bahr, K. Weaver, 2003 .