I. Takahashi

发表

Ultra-precision grinding of structural ceramics by electrolytic in-process dressing (ELID) grinding

H. Ohmori, I. Takahashi, B. Bandyopadhyay, 1996 .

Vibration and stability of non-uniform cracked Timoshenko beam subjected to follower force

I. Takahashi, 1999 .

DEVELOPMENT OF LARGE ULTRAPRECISION GRINDING SYSTEM WITH ELID FOR ASPHERIC OPTICAL ELEMENTS AND COMPONENTS

Y. Yamagata, M. Anzai, H. Asama, 1999 .

Vibration and stability of a non-uniform double-beam subjected to follower forces

I. Takahashi, I. Takahashi, T. Yoshioka, 1996 .

Surface modification of aluminum by electrical discharge alloying

Naotake Mohri, Masahiro Okumiya, N. Mohri, 1994 .

Improvement for Pressure Performance of Micro-EHD Pump with an Arrangement of Thin Cylindrical Electrodes

I. Takahashi, I. Kano, 2006 .

MICRO-ELECTROHYDRODYNAMIC PUMP BY DIELECTRIC FLUID: IMPROVEMENT FOR PERFORMANCE OF PRESSURE USING CYLINDRICAL ELECTRODES

I. Takahashi, I. Kano, Kazuya Mizuochi, 2005 .

A Measurement Method of Thermal Conductivity of Soft Materials and Liquids by Utilizing a Point-Contact Method

J. Okajima, S. Maruyama, I. Takahashi, 2014 .

Technique for anisotropic extension of organic crystals: application to temperature dependence of electrical resistance.

Hiroshi Yamamoto, I. Takahashi, Takashi Yamamoto, 2007, The Review of scientific instruments.

Strength of ceramic materials containing small flaws

S. Usami, S. Shida, I. Takahashi, 1986 .

Specific Character of Material Flow in Near-Surface Layer during Friction Stir Processing of AZ31 Magnesium Alloy

H. Kokawa, I. Takahashi, H. Takahashi, 2010 .

Measurement of Thermophysical Properties of TiAl Intermetallic Compound by Direct Electrical Heating Method.

I. Takahashi, A. Sugawara, 1991 .

An integrated system development for ball end mill design, creation and evaluation

Yi Lu, Ichiro Takahashi, Masahiro Anzai, 2005 .

Inverse Method for Estimating Local Thermal Diffusivity of Biomaterials

J. Okajima, S. Maruyama, I. Takahashi, 2013 .

Efficient and stable grinding of ceramics by electrolytic in-process dressing (ELID)

B. P. Bandyopadhyay, H. Ohmori, H. Ohmori, 1997 .

Highly Efficient Grinding of Ceramic Parts by Electrolytic In-Process Dressing (ELID) Grinding

H. Ohmori, I. Takahashi, B. Bandyopadhyay, 1996 .

Efficient Grinding Technique Utilizing Electrolytic In-Process Dressing for Precision Machining of Hard Materials

H. Ohmori, I. Takahashi, 1994 .

Effect of flaw size on elevated temperature static fatigue limit of silicon nitride.

S. Usami, I. Takahashi, T. Machida, 1987 .

Effect of Defect Size and Notch Root Radius on Fracture Strength of Engineering Ceramics

S. Usami, S. Shida, I. Takahashi, 1985 .

Fracture and Elevated-temperature Static-fatigue of Ceramics Containing Small Flaws

S. Usami, I. Takahashi, H. Miyata, 1987 .

Static-fatigue limit of ceramic materials containing small flaws

S. Usami, I. Takahashi, T. Machida, 1986 .

Crack propagation and arrest behavior in sintered silicon nitride under static fatigue at elevated temperature.

S. Usami, I. Takahashi, T. Machida, 1986 .

Transient characteristics of thermal contact conductance between isotropic rough surfaces of metals

I. Takahashi, Sou Fujiwara, 2001 .

Neural identification for critical flutter load of a cracked shaft simultaneously subjected to a follower force with an axial force

I. Takahashi, I. Takahashi, 2002 .

IDENTIFICATION FOR CRITICAL FLUTTER LOAD AND BOUNDARY CONDITIONS OF A BEAM USING NEURAL NETWORKS

I. Takahashi, I. Takahashi, 1999 .

Vibration and stability of a cracked shaft simultaneously subjected to a follower force with an axial force

I. Takahashi, I. Takahashi, 1998 .

Estimation of Critical Flutter Load of a Non-Uniform L-Shaped Beam subjected to a Follower Force

I. Takahashi, I. Takahashi, 2012 .

Estimation of Impact Damage in C/C Composites by Drop Weight Tests

I. Takahashi, T. Yoshioka, 2008 .

Estimating Method of Dynamic Fracture Toughness in C/C Composites

I. Takahashi, T. Yoshioka, 2008 .

Estimation of Impact Damage in C/C Composites by Drop Weight Tests (Wavelet Analysis of Impact Load)

I. Takahashi, T. Yoshioka, 2006 .

Estimation Method for Thermal Conductivity of Soft Materials and Liquids by Inverse Analysis

J. Okajima, S. Maruyama, I. Takahashi, 2013 .

Axial Heat-Transfer Characteristics Enhanced by Oscillating Fluid in a Thin Tube.A Newly Proposed Model and Expression for Effective Thermal Diffusivity.

I. Takahashi, 1995 .

Development of an Electrohydrodynamic (EHD) Micropump to Generate Oscillating Flow at Low Frequencies

I. Takahashi, I. Kano, Yuhei Fujiwara, 2010 .

Tensile mechanics of alanine-based helical polypeptide: force spectroscopy versus computer simulations.

A. Ikai, R. Afrin, I. Takahashi, 2009, Biophysical journal.

Dynamic Strength Evaluation of Ceramic Beams Containing Small Flaws

I. Takahashi, 1990 .

Mirror Surface Grinding by Metal Bonded Super-abrasive Wheel with Electrolytic In-process Dressing

T. Nakagawa, H. Ohmori, I. Takahashi, 1991 .

Effects of Moisture Content in a Dielectric Liquid on Electrohydrodynamic Pumping

I. Takahashi, T. Nishina, I. Kano, 2009, IEEE Transactions on Industry Applications.