P. Kapsa

发表

P. Kapsa, J. M. Martín, 1982 .

Impact of contact size and geometry on the lifetime of a solid lubricant

S. Fouvry, P. Kapsa, V. Fridrici, 2003 .

Wear Behavior of Martensitic Stainless Steel in Rolling-Sliding Contact for Planetary Roller Screw Mechanism: Study of the WC/C Solution

P. Kapsa, V. Fridrici, G. Aurégan, 2016 .

Mechanism of boundary lubrication with zinc dithiophosphate

J. Georges, P. Kapsa, T. Mathia, 1979 .

Identification of a friction model at tool/chip/workpiece interfaces in dry machining of AISI4142 treated steels

Abdelwaheb Dogui, Joël Rech, W. Ben Salem, 2009 .

Influence of chemical composition and microstructure of gray cast iron on wear of heavy duty diesel engines cylinder liners

P. Kapsa, V. Fridrici, J. Keller, 2007 .

The role of carbon in lubricated mild wear

J. M. Martin, I. Berbezier, P. Kapsa, 1986 .

Theoretical analysis of fatigue cracking under dry friction for fretting loading conditions

K. Dang Van, Siegfried Fouvry, Leo Vincent, 1996 .

Effect of surface topography on formation of squeal under reciprocating sliding

Chen Guangxiong, Leo Vincent, Zhou Zhongrong, 2002 .

Experimental simulation of rolling–sliding contact for application to planetary roller screw mechanism

Vincent Fridrici, Fernand Rodrigues, P. Kapsa, 2015 .

Characterization of the Friction Coefficient and White Layer at the Tool-Chip-Workpiece Interface Using Experimental and Numerical Studies during Friction Tests of AISI 1045

J. Rech, A. Dogui, P. Kapsa, 2013 .

Fretting behaviour of hard coatings under high normal load

S. Fouvry, P. Kapsa, L. Vincent, 1994 .

Grease Lubrication in Fretting

P. Kapsa, L. Vincent, Z. Zhou, 1998 .

Radial fretting fatigue damage of surface coatings

P. Kapsa, L. Vincent, Minhao Zhu, 2001 .

Soft EHL-Based Friction Mechanism of Unreinforced and GF-Reinforced PA66 in Contact with Steel Under PAO8 Oil Lubrication

P. Kapsa, V. Fridrici, T. Kunishima, 2021, Tribology Letters.

Effects of temperature and addition of zinc carboxylate to grease on the tribological properties of PA66 in contact with carbon steel

P. Kapsa, G. Guillonneau, J. Galipaud, 2021, Tribology International.

Comparison of the tribological properties of carbon/glass fiber reinforced PA66-based composites in contact with steel, with and without grease lubrication

P. Kapsa, V. Fridrici, T. Kunishima, 2021, Wear.

Effects of glass fiber properties and polymer molecular mass on the mechanical and tribological properties of a polyamide-66-based composite in contact with carbon steel under grease lubrication

P. Kapsa, V. Fridrici, T. Kunishima, 2020 .

Sliding damage on hot-pressed and sintered silicon nitride caused by a diamond tip under controlled humidity

P. Kapsa, Y. Enomoto, 1988 .

Effect of indenter geometry and relationship between abrasive wear and hardness in early stage of repetitive sliding

C. Henon, P. Kapsa, C. Henon, 2006 .

A systematic approach for the selection of tribological coatings

D. Luo, P. Kapsa, V. Fridrici, 2011 .

Effects of temperature increase during surgical drilling in acrylic resin.

P. Kapsa, V. Fridrici, G. Bouvard, 2019, Technology and health care : official journal of the European Society for Engineering and Medicine.

Degradation of Bioceramics

J. Chevalier, P. Kapsa, V. Fridrici, 2012 .

Temperature effect on the kinetic alumina layer growth on 5086 aluminum substrate

P. Kapsa, V. Fridrici, R. Ali, 2018 .

Influence of Surface Finishing on the Tribological Behavior of Self-Lubricating Iron-Based Composites

P. Kapsa, J. D. de Mello, C. Binder, 2018 .

Tribological evaluation of self-lubricating sintered steels

P. Kapsa, C. Binder, A. Klein, 2015 .

Paper Paper XIX (i) Measurements of thin films adhesion and mechanical properties with indentation curves

J. Georges, P. Kapsa, J. Loubet, 1990 .

Influence of Calf Serum on Fretting Behaviors of Ti–6Al–4V and Diamond-Like Carbon Coating for Neck Adapter–Femoral Stem Contact

P. Kapsa, V. Fridrici, J. Geringer, 2018, Tribology Letters.

On the interfacial behaviour of a glass/epoxy composite during a micro-indentation test: assessment of interfacial shear strength using reduced indentation curves

P. Kapsa, M. Kharrat, A. Chateauminois, 1997 .

Low-friction study between diamond-like carbon coating and Ti 6Al 4V under fretting conditions

P. Kapsa, V. Fridrici, J. Geringer, 2019, Tribology International.

Study of relations between viscoelasticity and tribological behaviour of filled elastomer for lip seal application

P. Kapsa, G. Vigier, J. Pelletier, 2007 .

A temperature-programmed desorption and oxidation investigation of wear debris from carbon/carbon composite aircraft brakes

P. Jacquemard, P. Kapsa, J. Joly, 2007 .

Development of a micro-indentation model simulating different mechanical responses of the fibre/matrix interface

F. Sidoroff, P. Kapsa, A. Chateauminois, 2001 .

Friction of 316L stainless steel on soft-tissue-like poly(vinyl alcohol) hydrogel in physiological liquid

P. Kapsa, M. Ohta, V. Fridrici, 2015 .

Influence of viscoelasticity on the tribological behaviour of carbon black filled nitrile rubber (NBR) for lip seal application

P. Kapsa, G. Vigier, J. Pelletier, 2005 .

Tribological behaviour of pipe coating in dry sliding contact with steel

P. Kapsa, V. Fridrici, K. Elleuch, 2009 .

Comparative study on wear behaviour of magnesium and aluminium alloys

P. Kapsa, V. Fridrici, K. Elleuch, 2006 .

Influence of diamond-like carbon coatings and roughness on fretting behaviors of Ti–6Al–4V for neck adapter–femoral stem contact

P. Kapsa, V. Fridrici, J. Geringer, 2018, Wear.

An investigation on fretting wear life of bonded MoS2 solid lubricant coatings in complex conditions

P. Kapsa, L. Vincent, Minhao Zhu, 2003 .

Fretting wear behavior of a Cu–Ni–In plasma coating

Siegfried Fouvry, S. Fouvry, P. Kapsa, 2003 .

Abrasive wear of aluminium alloys rubbed against sand

P. Kapsa, K. Elleuch, S. Mezlini, 2006 .

Metal adhesion issues in dry grinding: The role of active fillers

P. Kapsa, T. Mogne, C. Minfray, 2016 .

Palliatives in fretting: A dynamical approach

Siegfried Fouvry, Leo Vincent, C. Langlade, 2006 .

Analysis of sliding behaviour for fretting loadings : determination of transition criteria

Siegfried Fouvry, Leo Vincent, S. Fouvry, 1995 .

BORON CARBIDE COATINGS : CORRELATION BETWEEN MECHANICAL PROPERTIES AND LPCVD PARAMETERS VALUES

P. Kapsa, J. Loubet, G. Male, 1989 .

Progress in fretting maps

Leo Vincent, Zhou Zhongrong, P. Kapsa, 2006 .

An experimental investigation on composite fretting mode

P. Kapsa, L. Vincent, Minhao Zhu, 2001 .

Effect of shot peening on the fretting wear of Ti–6Al–4V

S. Fouvry, P. Kapsa, V. Fridrici, 2001 .

Influence of different reinforcing particles on the scratch resistance and microstructure of different WC–Ni composites

P. Kapsa, V. Fridrici, D. Yung, 2016 .

Study of Damage Mechanisms in Cold-Sprayed 316L-Matrix Composite Coatings Using Novel Impact-Sliding Testing

P. Kapsa, A. Sova, J. Coulon, 2014 .

Friction Properties of Poly(vinyl alcohol) Hydrogel: Effects of Degree of Polymerization and Saponification Value

Hiroyuki Kosukegawa, Keisuke Mamada, Makoto Ohta, 2011 .

The effect of diffusion treatments in a glow-discharge plasma in Ar + O2 atmosphere on friction and wear of Ti-6Al-4V alloy

S. Fouvry, P. Kapsa, B. Wendler, 2003 .

Nature and removal of the modified layer in Cu CMP with ferric nitrate as oxidizer

P. Kapsa, P. Bernard, S. Valette, 2008 .

Wear and friction characterization of materials for hip prosthesis

P. Kapsa, V. Fridrici, V. Banchet, 2007 .

Wear Mechanisms at the Metal Evaporated Magnetic Tape-Head Interface

P. Kapsa, H. Osaki, K. Katô, 1999 .

An elastic–plastic shakedown analysis of fretting wear

Siegfried Fouvry, Leo Vincent, S. Fouvry, 2001 .

An energy description of wear mechanisms and its applications to oscillating sliding contacts

Siegfried Fouvry, Tomasz Liskiewicz, S. Fouvry, 2003 .

The effect of sulphuric anodisation of aluminium alloys on contact problems

P. Kapsa, S. Mezlini, Khaled Elleuch, 2006 .

Influence of surfactant and salts on chemical mechanical planarisation of copper

P. Kapsa, P. Bernard, J. Abry, 2005 .

Sharp indentation behavior of carbon/carbon composites and varieties of carbon

J. Lamon, P. Kapsa, J. Loubet, 2002 .

On fretting of XC38 steel: surface treatments effect

S. Fouvry, P. Kapsa, K. Elleuch, 2008 .

Tribologically transformed structure in fretting

S. Fouvry, P. Kapsa, L. Vincent, 2000 .

Fretting behaviour of TiN coatings

S. Fouvry, P. Kapsa, L. Vincent, 1997 .

Quantification of fretting damage

Siegfried Fouvry, Leo Vincent, S. Fouvry, 1996 .

Fretting maps for anodised aluminium alloys

S. Fouvry, P. Kapsa, K. Elleuch, 2003 .

The fretting sliding transition as a criterion for electrical contact performance

Siegfried Fouvry, Leo Vincent, S. Fouvry, 2001 .

Wear analysis in fretting of hard coatings through a dissipated energy concept

H. Zahouani, S. Fouvry, P. Kapsa, 1997 .

Relationship between Hardness and Abrasive Wear for some Aluminium Alloys

P. Kapsa, S. Mezlini, G. Meille, 2002 .

Boundary lubrication with anti-wear additives: study of interface film formation by electrical contact resistance

J. Georges, P. Kapsa, J. M. Martín, 1979 .

Antiwear Mechanism of ZDDP in the Presence of Calcium Sulfonate Detergent

J. Georges, P. Kapsa, J. M. Martín, 1981 .

Sliding wear transition for the CW614 brass alloy

P. Kapsa, K. Elleuch, R. Elleuch, 2006 .

An investigation of fretting behaviour of several metallic materials under grease lubrication

P. Kapsa, L. Vincent, Minhao Zhu, 2000 .

Friction properties of PVA-H/steel ball contact under water lubrication conditions

Hiroyuki Kosukegawa, Keisuke Mamada, Makoto Ohta, 2011 .

Aging effect on thermal, mechanical and tribological behaviour of polymeric coatings used for pipeline application

P. Kapsa, K. Elleuch, N. Guermazi, 2008 .

Susceptibility to scratch damage of high density polyethylene coating

H. Zahouani, P. Kapsa, K. Elleuch, 2008 .

Nanoscratch and friction: An innovative approach to understand the tribological behaviour of poly(amide) fibres

J. Cayer-Barrioz, P. Kapsa, D. Mazuyer, 2006 .

Nanoscratch and Interfacial Friction of Poly(Amide) Fibres

J. Cayer-Barrioz, P. Kapsa, D. Mazuyer, 2006 .

Wear behavior of high chromium sintered steel under dynamic impact-sliding: Effect of temperature

P. Kapsa, M. Messaadi, 2016 .

Numerical and experimental analysis of dynamic oblique impact: Effect of impact angle

G. Kermouche, P. Kapsa, M. Messaadi, 2015 .

Selecting solid lubricant coatings under fretting conditions

D. Luo, P. Kapsa, V. Fridrici, 2010 .

Colloidal Boundary Friction of Sapphire

J. Georges, P. Kapsa, D. Mazuyer, 1992 .

Effect of contact configuration on the durability and friction coefficient of pressure‐sprayed MoS2 coatings under fretting conditions

P. Kapsa, V. Fridrici, D. Luo, 2009 .

On the correlation abrasive wear resistance – molecular weight: A quantitative wear law for polymeric fibres

J. Cayer-Barrioz, P. Kapsa, D. Mazuyer, 2006 .

Experimental, numerical and analytical studies of abrasive wear: correlation between wear mechanisms and friction coefficient

P. Kapsa, H. Arfa, S. Mezlini, 2005 .

Influence of the attack angle on the scratch testing of an aluminium alloy by cones: Experimental and numerical studies

H. Zahouani, P. Kapsa, S. Mezlini, 2008 .

Abrasive wear micromechanisms of oriented polymers

J. Cayer-Barrioz, P. Kapsa, D. Mazuyer, 2004 .

Influence of Deposition Positions on Fretting Behaviors of DLC Coating on Ti-6Al-4V

P. Kapsa, V. Fridrici, J. Geringer, 2019, Tribology Transactions.

Developments of fretting sliding criteria to quantify the local friction coefficient evolution under partial slip condition

S. Fouvry, P. Kapsa, L. Vincent, 1998 .

Bioengineering Materials and Conditions for Obtaining Low Friction with PVA Hydrogels

Hiroyuki Kosukegawa, Makoto Ohta, Vincent Fridrici, 2013 .

Investigation on mechanical properties of tribofilm formed on Ti–6Al–4V surface sliding against a DLC coating by nano-indentation and micro-pillar compression techniques

P. Kapsa, G. Guillonneau, V. Fridrici, 2019, Wear.

A Global Methodology to Quantify Fretting Damages

S. Fouvry, P. Kapsa, L. Vincent, 2003 .

Effect of double network hydrogel film thickness on the run-in tribological properties of a friction system using DN gel

H. Zahouani, P. Kapsa, K. Adachi, 2021 .

An energy description of hard coating wear mechanisms

Siegfried Fouvry, S. Fouvry, P. Kapsa, 2001 .

Environmental effects in fretting

P. Kapsa, 2011 .

Tribological properties of niobium ion implanted alumina

P. Kapsa, J. Loubet, B. Canut, 1992 .

Paper IX (iii) Tribological Behavior of Niobium Ions Implanted Sapphire: Formation and Properties of a Transfer Layer

P. Kapsa, J. Loubet, M. Bauer, 1992 .

Structure, mechanical, and tribological properties of titanium implanted alumina

P. Kapsa, J. Loubet, Y. Mahéo, 1992 .

Correlation Between Tribological Parameters and Wear Mechanisms of Homogeneous and Heterogeneous Material

H. Zahouani, P. Kapsa, M. Mansori, 2009 .

Titanium and niobium implantation into α-Al2O3: structural and mechanical properties

P. Kapsa, J. Loubet, B. Canut, 1992 .

Mechanical Behavior of Tribochemical Films Under a Cyclic Tangential Load in a Ball-Flat Contact

P. Kapsa, J. Sabot, A. Tonck, 1986 .

Experimental characterization of friction coefficient at the tool–chip–workpiece interface during dry cutting of AISI 1045

Abdelwaheb Dogui, Joël Rech, W. Ben Salem, 2012 .

The effect of damage in the numerical simulation of a scratch test

H. Zahouani, A. Dogui, P. Kapsa, 2007 .

Relationships between the fretting wear behavior and the ball cratering resistance of solid lubricant coatings

D. Luo, P. Kapsa, V. Fridrici, 2010 .

Surface topography and tribology of cast iron in boundary lubrication

Jonathan Keller, Vincent Fridrici, J. Keller, 2009 .

Identification of the characteristic length scale for fatigue cracking in fretting contacts

F. Sidoroff, Siegfried Fouvry, Leo Vincent, 1998 .

A Multiaxial Fatigue Analysis of Fretting Contact Taking Into Account the Size Effect

Siegfried Fouvry, Leo Vincent, S. Fouvry, 2000 .

Effect of lateral resolution on topographical images and three-dimensional functional parameters

Hassan Zahouani, Thomas G. Mathia, R. Vargiolu, 1998 .

Damage of different tungsten carbides under impact-sliding motion

P. Kapsa, G. Guillonneau, V. Fridrici, 2017 .

Effect of temperatures up to 400 °C on the impact-sliding of valve-seat contacts

Amilcar Ramalho, A. Ramalho, P. Kapsa, 2009 .

Identification of a Friction Model at the Tool-Chip-Workpiece Interface in Dry Machining of a AISI 1045 Steel With a TiN Coated Carbide Tool

Abdelwaheb Dogui, Joël Rech, Wacef Ben Salem, 2011 .

Effect of a combined machining/burnishing tool on the roughness and mechanical properties

C. Braham, P. Kapsa, S. Sghaier, 2014 .