C. Lartigue

发表

Effects of data point distribution and mathematical model on finding the best-fit sphere to data

P. Bourdet, C. Lartigue, F. Leveaux, 1993 .

Characterization and influence of defect size distribution induced by ball-end finishing milling on fatigue life

Claire Lartigue, R. Billardon, C. Lartigue, 2011 .

Surface topography in ball end milling process: Description of a 3D surface roughness parameter

C. Lartigue, Y. Quinsat, L. Sabourin, 2008 .

A Method for Computation and Assessment of NC Tool-paths in Free-form Curve Format

E. Duc, C. Lartigue, E. Duc, .

Avoiding 5-axis singularities using tool path deformation

Pierre Bourdet, Claire Lartigue, Emmanuel Duc, 2004 .

Characterization of surface topography of 3D printed parts by multi-scale analysis

C. Brown, C. Lartigue, Y. Quinsat, 2018 .

Influence of different calcic antagonists on the Caco-2 cell monolayer integrity or “TEER, a measurement of toxicity ?”

C. Lartigue, F. Mathieu, M. Galmier, 2012, European Journal of Drug Metabolism and Pharmacokinetics.

Anticoagulant properties of enoxaparin 400 IU/mL–40 % ethanol catheter lock solution

B. Souweine, C. Lartigue, M. Piot, 2015, SpringerPlus.

Design, synthesis and preliminary biological evaluation of acridine compounds as potential agents for a combined targeted chemo-radionuclide therapy approach to melanoma.

J. Maublant, C. Lartigue, N. Moins, 2008, Bioorganic & medicinal chemistry.

Synthesis and antiviral activity of an imidazo[1,2-a]pyrrolo[2,3-c]pyridine series against the bovine viral diarrhea virus.

C. Lartigue, J. Neyts, J. Chezal, 2010, European journal of medicinal chemistry.

New 3- and 4-hydroxyfuranones as anti-oxidants and anti-inflammatory agents.

C. Lartigue, E. Duroux, M. Madesclaire, 2005, Bioorganic & medicinal chemistry.

Transepithelial transport of bepridil in the human intestinal cell line, Caco-2, using a “dynamic model”

C. Lartigue, F. Mathieu, M. Galmier, 2003, European Journal of Drug Metabolism and Pharmacokinetics.

Short and efficient access to imidazo[1,2-a]pyrrolo[3,2-c]pyridine derivatives

C. Lartigue, J. Neyts, J. Chezal, 2010 .

Evaluation of radiolabeled (hetero)aromatic analogues of N-(2-diethylaminoethyl)-4-iodobenzamide for imaging and targeted radionuclide therapy of melanoma.

J. Maublant, C. Lartigue, N. Moins, 2008, Journal of medicinal chemistry.

Calibration based on part set-up measurement for on-machine inspection using vision

C. Lartigue, Y. Quinsat, L. Dubreuil, 2015, International Journal on Interactive Design and Manufacturing (IJIDeM).

Efficient synthesis of novel dipyridoimidazoles and pyrido[1′,2′;1,2]imidazo[4,5-d]pyridazine derivatives

C. Lartigue, J. Chezal, E. Moreau, 2003 .

Effects of additive manufacturing processes on part defects and properties: a classification review

C. Lartigue, Y. Quinsat, Marc-Antoine de Pastre, 2022, International Journal on Interactive Design and Manufacturing (IJIDeM).

Heterocyclization of Functionalized Vinylic Derivatives of Imidazo[1,2-a]pyridines

C. Lartigue, J. Chezal, E. Moreau, 2001 .

Preliminary Study of Palladium Catalyzed Iminoannulation in an Imidazo[1,2-a]pyridine Series

C. Lartigue, J. Chezal, E. Moreau, 2005 .

Efficient Synthesis of Novel Dipyridoimidazoles and Pyrido[1′,2′;1,2]imidazo[4,5-d]pyridazine Derivatives.

C. Lartigue, J. Chezal, E. Moreau, 2003 .

Efficient Synthesis of New Polyfunctionalized Thiadiazaacenaphthylenes from Imidazo[1,2-a]pyridines

C. Lartigue, J. Chezal, E. Moreau, 2002 .

Multi-scale Curvature Analysis and Correlations with the Fatigue Limit on Steel Surfaces after Milling

Claire Lartigue, Christopher A. Brown, Yann Quinsat, 2014 .

Chemical Composition of Essential Oils of Eucalyptus from Bénin: Eucalyptus citriodora and E. camaldulensis. Influence of Location, Harvest Time, Storage of Plants and Time of Steam Distillation

C. Lartigue, J. Chalchat, J. Gbénou, 1999 .

Computer-Aided Inspection Planning: A Multisensor High-Level Inspection Planning Strategy

Claire Lartigue, Charyar-Mehdi Souzani, Sif Eddine Sadaoui, 2019, J. Comput. Inf. Sci. Eng..

Realistic simulation of surface defects in five-axis milling using the measured geometry of the tool

Claire Lartigue, Sylvain Lavernhe, Christopher A. Brown, 2014 .

Mesh Segmentation and Model Extraction

Jean-Michel Morel, Claire Lartigue, Julie Digne, 2010, Curves and Surfaces.

High-performance liquid chromatographic determination of phenylephrine and tropicamide in human aqueous humor.

C. Lartigue, J. Aiache, J. Petit, 2000, Biomedical chromatography : BMC.

Qualification of CT data for areal surface texture analysis

C. Lartigue, Y. Quinsat, Jean-Baptiste Guyon, 2018, The International Journal of Advanced Manufacturing Technology.

Qualification of CT data for areal surface texture analysis

Claire Lartigue, Yann Quinsat, Jean Baptiste Guyon, 2018, The International Journal of Advanced Manufacturing Technology.

Characterization of 3D surface topography in 5-axis milling pdf

Claire Lartigue, Sylvain Lavernhe, Yann Quinsat, 2011, ArXiv.

Mass spectrometry and scanning electron microscopy study of silicone tunneled dialysis catheter integrity after an exposure of 15 days to 60% ethanol solution.

B. Souweine, C. Lartigue, A. Heng, 2007, Rapid communications in mass spectrometry : RCM.

Geometrical deviations versus smoothness in 5-axis high-speed flank milling

Pierre-Yves Pechard, Christophe Tournier, Claire Lartigue, 2009 .

Introducing minimum energy tool path in 5-axis flank milling

Christophe Tournier, Claire Lartigue, Pierre-Yves Pechard, 2008 .

The Concept of the Machining Surface in 5-Axis Milling of Free-form Surfaces

Christophe Tournier, Claire Lartigue, Emmanuel Duc, 2002 .

CNC tool path in terms of B-spline curves

Claire Lartigue, Takashi Maekawa, François Thiebaut, 2001, Comput. Aided Des..

Model for the prediction of 3D surface topography in 5-axis milling

Claire Lartigue, Sylvain Lavernhe, Yann Quinsat, 2010 .

A Hybrid Approach to Predict Residual Stresses Induced by Ball-End Tool Finishing Milling of a Bainitic Steel

Claire Lartigue, René Billardon, Benoît Beaubier, 2011 .

Complementary mass spectrometric approaches and scanning electron microscopy to study the structural stability of polyurethane tunneled dialysis catheters after exposure to ethanol solutions.

B. Souweine, C. Lartigue, B. Bouchon, 2013, Rapid communications in mass spectrometry : RCM.

Compatibility of Injectable Anticoagulant Agents in Ethanol; In Vitro Antibiofilm Activity and Impact on Polyurethane Catheters of Enoxaparin 400 U/mL in 40% v/v Ethanol

B. Souweine, C. Lartigue, D. Balestrino, 2016, PloS one.

Validation of a reversed-phase liquid chromatographic method for the determination of hydrocortisone phosphate disodium in a gel formulation.

C. Lartigue, J. Aiache, J. Petit, 1999, Journal of pharmaceutical and biomedical analysis.

Identification of degradation products of diclofenac by electrospray ion trap mass spectrometry.

C. Lartigue, J. Madelmont, M. Galmier, 2005, Journal of pharmaceutical and biomedical analysis.

Filling holes in digitized point cloud using a morphing-based approach to preserve volume characteristics

Yann Quinsat, Claire lartigue, C. Lartigue, 2015 .

On Neural Networks’ Ability to Approximate Geometrical Variation Propagation in Assembly

Claire Lartigue, François Thiébaut, Loïc Andolfatto, 2013 .

Transepithelial transport of bepridil in the human intestinal cell line, Caco-2, using two media, DMEMc and HBSS.

C. Lartigue, J. Petit, F. Mathieu, 1999, International journal of pharmaceutics.

Quality- and cost-driven assembly technique selection and geometrical tolerance allocation for mechanical structure assembly

Claire Lartigue, François Thiébaut, Loïc Andolfatto, 2014 .

5-axis Direct Machining of Rough Clouds of Points

Christophe Tournier, Claire Lartigue, François Thiébaut, 2010 .

A first approach to characterize the surface integrity generated by ball-end finishing milling

Claire Lartigue, N. Guillemot, B. K. Mawussi, 2013 .

High-performance NC for high-speed machining by means of polynomial trajectories

D. Dumur, C. Lartigue, M. Ritou, 2013, 1309.3732.

Feed drive modelling for the simulation of tool path tracking in multi-axis High Speed Machining pdf

Didier Dumur, Claire Lartigue, Sylvain Lavernhe, 2011, ArXiv.

5-axis High Speed Milling Optimisation pdf

Christophe Tournier, Claire Lartigue, Sylvain Lavernhe, 2009, ArXiv.

Kinematical performance prediction in multi-axis machining for process planning optimization

Christophe Tournier, Claire Lartigue, Sylvain Lavernhe, 2008 .

5-axis Iso-scallop Tool Paths along Parallel Planes

Christophe Tournier, Claire Lartigue, C. Lartigue, 2008 .

Model for performance prediction in multi-axis machining

C. Lartigue, C. Tournier, S. Lavernhe, 2006, 0904.1075.

A new format for 5-axis tool path computation, using Bspline curves

Pierre Bourdet, Claire Lartigue, Emmanuel Duc, 2004, Comput. Aided Des..

Tool path deformation in 5-axis flank milling using envelope surface

Claire Lartigue, Emmanuel Duc, Armelle Affouard, 2003, Comput. Aided Des..

A New Concept for the Design and the Manufacturing of Free-Form Surfaces: The Machining Surface

Pierre Bourdet, Christophe Tournier, Claire Lartigue, 1999 .

Optimization of 5-axis high-speed machining using a surface based approach

Christophe Tournier, Claire Lartigue, Sylvain Lavernhe, 2008, Comput. Aided Des..

Scale Space Meshing of Raw Data Point Sets

Jean-Michel Morel, Claire Lartigue, Julie Digne, 2011, Comput. Graph. Forum.

Path planning of a laser-scanner with the control of overlap for 3d part inspection

Claire Lartigue, Sylvain Lavernhe, Yann Quinsat, 2018 .

A digital twin-based approach for the management of geometrical deviations during assembly processes

François Thiébaut, Claire Lartigue, Régis Lebrun, 2020, Journal of Manufacturing Systems.

Towards a New Concept of In-Line Crankshaft Balancing by Contact Less Measurement: Process for Selecting the Best Digitizing System

Charyar Mehdi-Souzani, Alexandre Zuquete-Guarato, Yann Quinsat, 2012 .

Scan Planning Strategy for a General Digitized Surface

Claire Lartigue, François Thiebaut, Charyar-Mehdi Souzani, 2006, J. Comput. Inf. Sci. Eng..

Digitised point quality in relation with point exploitation

Pierre Bourdet, Claire Lartigue, Alexandre Contri, 2002 .

Quality of 3D digitised points obtained with non-contact optical sensors

Pierre Bourdet, Claire Lartigue, Alexandre Contri, 2002 .

Assisted Decision-Making for Assembly Technique Selection and Geometrical Tolerance Allocation

Claire Lartigue, François Thiébaut, Loïc Andolfatto, 2013 .

Conversion of 3D scanned point cloud into a voxel-based representation for crankshaft mass balancing

Charyar Mehdi-Souzani, Alexandre Zuquete Guarato, Claire Lartigue, 2018 .

THE CONCEPT OF ALPHA-SHAPES APPLIED TO THREE-DIMENSIONAL METROLOGY

L. Mathieu, C. Lartigue, Bruno Chevalier, 2000 .

Dynamic and geometric error assessment of an XYC axis subset on five-axis high-speed machine tools using programmed end point constraint measurements

Marek Balazinski, Claire Lartigue, René Mayer, 2010 .

Kinematic Performances in 5-Axis Machining

Christophe Tournier, Claire Lartigue, Sylvain Lavernhe, 2007 .

New opportunities with the Duff reaction.

C. Lartigue, J. Chezal, A. Heitz, 2008, The Journal of organic chemistry.

Prediction of the endurance limit taking account of the microgeometry after finishing milling

Claire Lartigue, René Billardon, N. Guillemot, 2010 .

Shape defect analysis from volumetric data - Application to lattice struts in additive manufacturing

C. Lartigue, Y. Quinsat, Marc-Antoine de Pastre, 2022, Precision Engineering.

Multi-scale surface characterization in additive manufacturing using CT

Claire Lartigue, Christopher A. Brown, Yann Quinsat, 2017 .

ALGORITHMS FOR THE CALIBRATION OF LASER-PLANE SENSORS ON CMMS

Charyar Mehdi-Souzani, Pierre Bourdet, Luc Mathieu, 2004 .

Optimal scanning strategy for on-machine inspection with laser-plane sensor

Claire Lartigue, Yann Quinsat, Nguyen Duy Minh Phan, 2019, The International Journal of Advanced Manufacturing Technology.

Scanner path planning with the control of overlap for part inspection with an industrial robot

Claire Lartigue, Sylvain Lavernhe, Yann Quinsat, 2018, The International Journal of Advanced Manufacturing Technology.

Automatic path planning for high performance measurement by laser plane sensors

C. Lartigue, C. Mehdi-Souzani, S. E. Sadaoui, 2022, Optics and lasers in engineering.

A knowledge database of qualified digitizing systems for the selection of the best system according to the application

Charyar Mehdi-Souzani, Pierre Bourdet, Claire Lartigue, 2016 .

Voxel-based Path Planning for 3D Scanning of Mechanical Parts

Charyar Mehdi-Souzani, Alexandre Zuquete Guarato, Claire Lartigue, 2014 .

Assistance to Automatic Digitizing System Selection for 3D Part Inspection

Charyar Mehdi-Souzani, Claire Lartigue, Nicolas Audfray, 2012 .

Combining a Touch Probe and a Laser Sensor for 3D Part Inspection on CMM

Charyar Mehdi-Souzani, Claire Lartigue, Sif Eddine Sadaoui, 2018 .

A Novel Approach for 3D Part Inspection Using Laser-plane Sensors

Charyar Mehdi-Souzani, Claire Lartigue, Nicolas Audfray, 2013 .

Multisensor data processing in dimensional metrology for collaborative measurement of a laser plane sensor combined to a touch probe

C. Lartigue, C. Mehdi-Souzani, Sif Eddine Sadaoui, 2021, Measurement.

Conversion of 3D scanned point cloud into a voxel-based representation for crankshaft mass balancing

C. Lartigue, C. Mehdi-Souzani, Y. Quinsat, 2017, The International Journal of Advanced Manufacturing Technology.