M. Moesen

发表

Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures

J. Kruth, J. Schrooten, G. Kerckhofs, 2011 .

A symmetry invariant formulation of the relationship between the elasticity tensor and the fabric tensor

Maarten Moesen, Stephen C. Cowin, S. Cowin, 2012 .

The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds.

H Van Oosterwyck, J. Kruth, J. Schrooten, 2012, Acta biomaterialia.

Mechanical characterization of porous structures by the combined use of micro-CT and in-situ loading

Stepan Vladimirovitch Lomov, Martine Wevers, Maarten Moesen, 2008 .

Non-destructive characterisation of the influence of surface modification on the morphology and mechanical behaviour of rapid prototyped Ti6Al4v bone tissue engineering scaffolds

Martine Wevers, Dirk Loeckx, Maarten Moesen, 2010 .

Experimental quantification of the local strains in bone TE scaffolds by the combined use of micro-CT imaging, in-situ loading and local strain mapping

D. Loeckx, F. Maes, J. Schrooten, 2009 .

Morphological and mechanical characterization of Ti6Al4V scaffolds produced with Selective Laser Melting

Jean-Pierre Kruth, Maarten Moesen, Jan Schrooten, 2009 .

A symmetry invariant formulation of the relationship between the elasticity tensor and the fabric tensor.

Maarten Moesen, Stephen C Cowin, S. Cowin, 1985, Mechanics of materials : an international journal.

The use of micro-CT to correlate in-vitro cell behaviour with the surface roughness of Ti6Al4V scaffolds for tissue engineering

J. Schrooten, G. Kerckhofs, M. Wevers, 2011 .

Optimization of thin wall structures in SLM

J. Kruth, M. Moesen, T. Craeghs, 2012 .

Registration Based SIRT : A reconstruction algorithm for 4 D CT

J. Sijbers, J. Vlassenbroeck, M. Moesen, 2016 .

Designing optimal calcium phosphate scaffold-cell combinations using an integrative model-based approach.

H Van Oosterwyck, J. Schrooten, L. Geris, 2011, Acta biomaterialia.

Weibull statistics of bamboo fibre bundles: methodology for tensile testing of natural fibres

I. Verpoest, M. Moesen, A. W. Vuure, 2012 .

Bamboo fibres for reinforcement in composite materials: Strength Weibull analysis

M. Moesen, I. Verpoest, J. Ivens, 2014 .

Surface Modification of Ti6Al4V Open Porous Structures Produced by Additive Manufacturing

Martine Wevers, Maarten Moesen, Jan Schrooten, 2012 .

Characterization and optimization of cell seeding in scaffolds by factorial design: quality by design approach for skeletal tissue engineering.

Maarten Moesen, Jan Schrooten, Frank P Luyten, 2011, Tissue engineering. Part C, Methods.

High‐Resolution Microfocus X‐Ray Computed Tomography for 3D Surface Roughness Measurements of Additive Manufactured Porous Materials

Martine Wevers, Maarten Moesen, Jan Schrooten, 2013 .

Robust beam compensation for laser-based additive manufacturing

Maarten Moesen, Tom Craeghs, Jean-Pierre Kruth, 2011, Comput. Aided Des..

Enhancement of osteogenic gene expression for the differentiation of human periosteal derived cells.

J. Schrooten, F. Luyten, M. Moesen, 2011, Stem cell research.

Computational models for wall shear stress estimation in scaffolds: a comparative study of two complete geometries.

F. Maes, P. Van Ransbeeck, H. Van Oosterwyck, 2012, Journal of biomechanics.

Finite element modelling of SMA textiles: superelastic behaviour

Maarten Moesen, Rudy Stalmans, Ignaas Verpoest, 2011 .

Modelling of the geometry of weft-knitted fabrics

Ignace Verpoest, Stepan Vladimirovitch Lomov, Maarten Moesen, 2003 .

NON-DESTRUCTIVE CHARACTERISATION OF THE INFLUENCE OF

D. Loeckx, J. Schrooten, G. Kerckhofs, 2010 .

Characterization and optimization of cell seeding in scaffolds by factorial design: quality by design approach for skeletal tissue engineering.

J. Schrooten, F. Luyten, V. Bloemen, 2011, Tissue engineering. Part C, Methods.

The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds.

J. Kruth, J. Schrooten, G. Kerckhofs, 2012, Acta biomaterialia.