H. Fischer

F. Hölzle, H. Fischer, T. Steiner, 2017, Journal of cranio-maxillo-facial surgery : official publication of the European Association for Cranio-Maxillo-Facial Surgery.

Calcium phosphate scaffolds with defined interconnecting channel structure provide a mimetic 3D niche for bone marrow metastasized tumor cell growth.

G. Tonini, H. Fischer, M. Vogt, 2019, Acta biomaterialia.

Effects of Strontium-Doped β-Tricalcium Scaffold on Longitudinal Nuclear Factor-Kappa Beta and Vascular Endothelial Growth Factor Receptor-2 Promoter Activities during Healing in a Murine Critical-Size Bone Defect Model

Christian Bergmann, H. Fischer, T. Pufe, 2020, International journal of molecular sciences.

Corneal bioprinting utilizing collagen-based bioinks and primary human keratocytes.

J. Mehta, P. Walter, H. Fischer, 2019, Journal of biomedical materials research. Part A.

Degradation and swelling issues of poly-(d,l-lactide)/β-tricalcium phosphate/calcium carbonate composites for bone replacement.

H. Fischer, S. Weigelt, J. Abert, 2016, Journal of the mechanical behavior of biomedical materials.

Effect of platelet mediator concentrate (PMC) on Achilles tenocytes: an in vitro study

M. Shakibaei, A. Prescher, H. Fischer, 2016, BMC Musculoskeletal Disorders.

Effect of nanoscale surface topography on the adsorption of globular proteins

R. Hübner, H. Fischer, G. Grundmeier, 2021 .

Low-aspect ratio nanopatterns on bioinert alumina influence the response and morphology of osteoblast-like cells.

M. Foss, H. Fischer, A. Keller, 2015, Biomaterials.

Ultrasound-mediated deposition and cytocompatibility of apatite-like coatings on magnesium alloys

H. Fischer, A. Devi, G. Grundmeier, 2018, Surface and Coatings Technology.

Calcium Phosphate Based Three-Dimensional Cold Plotted Bone Scaffolds for Critical Size Bone Defects

Christian Bergmann, R. Telle, H. Fischer, 2014, BioMed research international.

Bioprinting-Associated Shear Stress and Hydrostatic Pressure Affect the Angiogenic Potential of Human Umbilical Vein Endothelial Cells

H. Fischer, S. Jockenhoevel, F. Kreimendahl, 2022, International journal of bioprinting.

Impaired Fracture Healing after Hemorrhagic Shock

Christian Bergmann, H. Fischer, T. Pufe, 2015, Mediators of inflammation.

Structural changes in ceramic veneered three-unit implant-supported restorations as a consequence of static and dynamic loading.

T. Taylor, H. Fischer, M. Wichmann, 2008, Dental materials : official publication of the Academy of Dental Materials.

Influence of bioactive glass-coating of zirconia implant surfaces on human osteoblast behavior in vitro.

H. Fischer, J. Nebe, J. Fischer, 2019, Dental materials : official publication of the Academy of Dental Materials.

Fracture toughness of dental ceramics: comparison of bending and indentation method.

H. Fischer, R. Marx, 2002, Dental materials : official publication of the Academy of Dental Materials.

Chemical strengthening of a dental lithium disilicate glass-ceramic material.

D. Edelhoff, Manfred Martin, S. Richter, 2008, Journal of biomedical materials research. Part A.

A New Laser-Processing Strategy for Improving Enamel Erosion Resistance

R. Poprawe, H. Fischer, J. Stollenwerk, 2017, Journal of dental research.

Glass-ceramic coating material for the CO2 laser based sintering of thin films as caries and erosion protection.

R. Poprawe, H. Fischer, J. Stollenwerk, 2017, Dental materials : official publication of the Academy of Dental Materials.

Improved mechanical long-term reliability of hip resurfacing prostheses by using silicon nitride

Wen Zhang, R. Telle, H. Fischer, 2010, Journal of materials science. Materials in medicine.

Wet chemical synthesis of strontium-substituted hydroxyapatite and its influence on the mechanical and biological properties

Christian Bergmann, H. Fischer, J. Abert, 2014 .

Development of a solvent-free polylactide/calcium carbonate composite for selective laser sintering of bone tissue engineering scaffolds.

R. Poprawe, K. Wissenbach, H. Fischer, 2019, Materials science & engineering. C, Materials for biological applications.

Incorporating 4D into Bioprinting: Real‐Time Magnetically Directed Collagen Fiber Alignment for Generating Complex Multilayered Tissues

Horst Fischer, Andreas Blaeser, Marcel Betsch, 2018, Advanced healthcare materials.

Calcium phosphate scaffolds mimicking the gradient architecture of native long bones.

Horst Fischer, Rainer Telle, Markus Lindner, 2014, Journal of biomedical materials research. Part A.

Manufacturing of individual biodegradable bone substitute implants using selective laser melting technique.

R. Poprawe, K. Wissenbach, M. Lindner, 2011, Journal of biomedical materials research. Part A.

The Effect of Addition of Calcium Phosphate Particles to Hydrogel‐Based Composite Materials on Stiffness and Differentiation of Mesenchymal Stromal Cells toward Osteogenesis

H. Fischer, D. F. Duarte Campos, A. Blaeser, 2018, Advanced healthcare materials.

Synthesis of novel tricalcium phosphate-bioactive glass composite and functionalization with rhBMP-2

Christian Bergmann, M. Lindner, A. Kirsten, 2011, Journal of materials science. Materials in medicine.

Retrievability of implant‐supported zirconia restorations cemented on zirconia abutments

H. Fischer, Shaza Bishti, S. Wolfart, 2018, The Journal of prosthetic dentistry.

Finite element and experimental analyses of polymer-based dental bridges reinforced by ceramic bars.

H Fischer, R Marx, H. Fischer, 2004, Journal of biomechanics.

Bone regeneration induced by a 3D architectured hydrogel in a rat critical-size calvarial defect.

F. Kiessling, A. Lendlein, H. Fischer, 2017, Biomaterials.

Biological Activation of Inert Ceramics: Recent Advances Using Tailored Self-Assembled Monolayers on Implant Ceramic Surfaces

H. Fischer, F. Böke, K. Schickle, 2014, Materials.

Bioactivation of inert alumina ceramics by hydroxylation.

R. Telle, H. Fischer, F. Niethard, 2005, Biomaterials.

Influence of annealing temperature on the strength of dental glass ceramic materials.

R. Telle, H. Fischer, R. Marx, 2005, Dental materials : official publication of the Academy of Dental Materials.

Effect of ion exchange of glazed dental glass ceramics on strength parameters.

R. Telle, H. Fischer, R. Marx, 2005, Journal of biomedical materials research. Part A.

Improvement of Strength Parameters of a Leucite-reinforced Glass Ceramic by Dual-ion Exchange

H. Fischer, R. Marx, 2001, Journal of dental research.

Manufacturing of bone substitute implants using Selective Laser Melting

K. Wissenbach, M. Lindner, H. Fischer, 2009 .

Crack healing in alumina bioceramics.

R Telle, H Fischer, R. Telle, 2008, Dental materials : official publication of the Academy of Dental Materials.

Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity

Horst Fischer, Molly M Stevens, Walter Richtering, 2016, Advanced healthcare materials.

Engineered Potato virus X nanoparticles support hydroxyapatite nucleation for improved bone tissue replacement.

H. Fischer, U. Commandeur, Ying-Ying Lin, 2017, Acta biomaterialia.

Attachment of Ultralow Amount of Engineered Plant Viral Nanoparticles to Mesenchymal Stem Cells Enhances Osteogenesis and Mineralization

H. Fischer, U. Commandeur, Ying-Ying Lin, 2020, Advanced healthcare materials.

Does soft really matter? Differentiation of induced pluripotent stem cells into mesenchymal stromal cells is not influenced by soft hydrogels.

H. Fischer, M. Zenke, W. Wagner, 2018, Biomaterials.

Cellulose Nanofibril Hydrogel Tubes as Sacrificial Templates for Freestanding Tubular Cell Constructs.

H. Fischer, L. de Laporte, A. Walther, 2016, Biomacromolecules.

Two‐photon laser scanning microscopy as a useful tool for imaging and evaluating macrophage‐, IL‐4 activated macrophage‐ and osteoclast‐based In Vitro degradation of beta‐tricalcium phosphate bone substitute material

M. V. van Zandvoort, M. Lindner, A. Kirsten, 2014, Microscopy research and technique.

Periodic microstructures on bioactive glass surfaces enhance osteogenic differentiation of human mesenchymal stromal cells and promote osteoclastogenesis in vitro.

H. Fischer, R. Leube, C. Dabhi, 2018, Journal of biomedical materials research. Part A.

Shear strength of composite bonded to Er:YAG laser-prepared enamel: an in vitro comparative study

H. Fischer, N. Gutknecht, R. Franzen, 2013, Lasers in Medical Science.

Functional in situ assessment of human articular cartilage using MRI: a whole-knee joint loading device

C. Kuhl, A. Prescher, P. Bruners, 2017, Biomechanics and modeling in mechanobiology.

Cytocompatibility of high strength non-oxide ceramics.

R. Telle, H. Fischer, R. Knüchel, 2009, Journal of biomedical materials research. Part A.

Bioprinting-associated pulsatile hydrostatic pressure elicits a mild proinflammatory response in epi- and endothelial cells.

H. Fischer, N. Schwarz, R. Leube, 2023, Biomaterials advances.

Role of Nrf2 in Fracture Healing: Clinical Aspects of Oxidative Stress

H. Fischer, T. Pufe, H. Jahr, 2019, Calcified Tissue International.

Influence of the material properties of a poly(D,L-lactide)/β-tricalcium phosphate composite on the processability by selective laser sintering.

R. Poprawe, K. Wissenbach, H. Fischer, 2018, Journal of the mechanical behavior of biomedical materials.

Emerging Neuroblastoma 3D In Vitro Models for Pre-Clinical Assessments

H. Fischer, M. Dominici, Diana Corallo, 2020, Frontiers in Immunology.

Influence of additional cement augmentation on endplate stability in circumferential stabilisation of osteoporotic spine fractures.

A. Prescher, H. Fischer, F. Hildebrand, 2019, Clinical biomechanics.

Calcium phosphate/microgel composites for 3D powderbed printing of ceramic materials

Garima Agrawal, Christian Bergmann, Mandy-Nicole Birkholz, 2016, Biomedizinische Technik. Biomedical engineering.

Biofunctionalization of Dental Abutment Surfaces by Crosslinked ECM Proteins Strongly Enhances Adhesion and Proliferation of Gingival Fibroblasts

G. Müller-Newen, H. Fischer, T. Tuna, 2021, Advanced Healthcare Materials.

Hypotrochoidal scaffolds for cartilage regeneration

H. Fischer, C. Mota, L. Moroni, 2022, bioRxiv.

The stiffness and structure of three-dimensional printed hydrogels direct the differentiation of mesenchymal stromal cells toward adipogenic and osteogenic lineages.

Horst Fischer, Sabine Neuss, Andreas Blaeser, 2015, Tissue engineering. Part A.

3D geometry orchestrates the transcriptional landscape of metastatic neuroblastoma cells in a multicellular in vitro bone model

H. Fischer, C. Zanon, S. Rütten, 2023, Materials today. Bio.

Computational geometry assessment for morphometric analysis of the mandible

Stefan Raith, Viktoria Varga, Timm Steiner, 2017, Computer methods in biomechanics and biomedical engineering.

Planning of mandibular reconstructions based on statistical shape models

Stefan Raith, Timm Steiner, Frank Hölzle, 2016, International Journal of Computer Assisted Radiology and Surgery.

Elimination of low-quality ceramic posts by proof testing.

H. Fischer, R. Marx, W. Rentzsch, 2002, Dental Materials.

Detection of microscopic cracks in dental ceramic materials by fluorescent penetrant method.

H. Fischer, F. Karaca, R. Marx, 2002, Journal of biomedical materials research.

In vivo fracture resistance of implant-supported all-ceramic restorations.

Horst Fischer, Daniel Edelhoff, D. Edelhoff, 2003, The Journal of prosthetic dentistry.

Biological Activation of Bioinert Medical High-Performance Oxide Ceramics by Hydrolytically Stable Immobilization of c(RGDyK) and BMP-2.

G. Müller-Newen, H. Fischer, S. Neuss, 2018, ACS applied materials & interfaces.

Influence of tooth mobility on critical stresses in all-ceramic inlay-retained fixed dental prostheses: a finite element study.

D. Edelhoff, A. Kirsten, H. Fischer, 2012, Dental materials : official publication of the Academy of Dental Materials.

Effect of Surface Roughness on Flexural Strength of Veneer Ceramics

H. Fischer, R. Marx, M. Schäfer, 2003, Journal of dental research.

Artificial Neural Networks as a powerful numerical tool to classify specific features of a tooth based on 3D scan data

Stefan Raith, Daniel Edelhoff, Jan-Frederik Güth, 2017, Comput. Biol. Medicine.

Improved reliability of leucite reinforced glass by ion exchange.

H. Fischer, R. Marx, H. Maier, 2000, Dental materials : official publication of the Academy of Dental Materials.

A defined heat pretreatment of gelatin enables control of hydrolytic stability, stiffness, and microstructural architecture of fibrin-gelatin hydrogel blends.

H. Fischer, W. Richtering, E. Buhl, 2022, Biomaterials science.

Engineering biofunctional in vitro vessel models using a multilayer bioprinting technique

F. Kiessling, H. Fischer, A. Kuehne, 2018, Scientific Reports.

Mechanically Tunable Bioink for 3D Bioprinting of Human Cells

Nicolas H Voelcker, Horst Fischer, Aurelien Forget, 2017, Advanced healthcare materials.

Biofabrication Under Fluorocarbon: A Novel Freeform Fabrication Technique to Generate High Aspect Ratio Tissue-Engineered Constructs

Horst Fischer, Sabine Neuss, Benjamin Theek, 2013, BioResearch open access.

Eine neue Beschichtungsmethode für zementierte Femurschaftimplantate – Biokompatibilität, Sterilisierbarkeit und Verbundfestigkeit. A New Coating Method for Cemented Stems in Total Hip Arthroplasty – Biocompatibility, Sterilization and Adhesive Strength

Horst Fischer, Rudolf Marx, F. U. Niethard, 2003 .

Enhanced osteogenic differentiation of human mesenchymal stromal cells as response to periodical microstructured Ti6Al4V surfaces.

H. Fischer, S. Rütten, S. Aveic, 2020, Journal of biomedical materials research. Part B, Applied biomaterials.

Influence of nanoporous titanium niobium alloy surfaces produced via hydrogen peroxide oxidative etching on the osteogenic differentiation of human mesenchymal stromal cells.

H. Fischer, D. Zander, S. Rütten, 2019, Materials science & engineering. C, Materials for biological applications.

Coupling of Phosphates on Alumina Surfaces for Bioactivation

R. Telle, H. Fischer, F. Müller, 2007 .

An engineered multicomponent bone marrow niche for the recapitulation of hematopoiesis at ectopic transplantation sites

B. Ebert, T. Brümmendorf, R. Schneider, 2016, Journal of Hematology & Oncology.

Temperature-dependent morphology changes of noble metal tricalcium phosphate-nanocomposites

B. Chichkov, Christian Bergmann, H. Fischer, 2014 .

Influence of Different Cell Types and Sources on Pre-Vascularisation in Fibrin and Agarose–Collagen Gels

H. Fischer, S. Jockenhoevel, A. Thiebes, 2019, Organogenesis.

A cusp supporting framework design can decrease critical stresses in veneered molar crowns.

Stefan Raith, Horst Fischer, Armin Kirsten, 2014, Dental materials : official publication of the Academy of Dental Materials.

Nondestructive estimation of the strength of dental ceramic materials.

H Fischer, R Marx, H. Fischer, 2001, Dental materials : official publication of the Academy of Dental Materials.

Preparation of spherical calcium phosphate granulates suitable for the biofunctionalization of active brazed titanium alloy coatings

Christian Bergmann, H. Fischer, K. Bobzin, 2015, Biomedizinische Technik. Biomedical engineering.

Transformative Materials to Create 3D Functional Human Tissue Models In Vitro in a Reproducible Manner

S. Ingebrandt, Matthias Wessling, F. Kiessling, 2023, Advanced healthcare materials.

Lifetime Prediction of All-ceramic Bridges by Computational Methods

H Fischer, R Marx, H. Fischer, 2003, Journal of dental research.

Multiscale 3D Bioprinting by Nozzle-Free Acoustic Droplet Ejection.

H. Fischer, S. Aveic, Ramin Nasehi, 2021, Small methods.

Suppression of subcritical crack growth in a leucite-reinforced dental glass by ion exchange.

H. Fischer, R. Marx, 2003, Journal of biomedical materials research. Part A.

Selective laser-melted fully biodegradable scaffold composed of poly(d,l-lactide) and β-tricalcium phosphate with potential as a biodegradable implant for complex maxillofacial reconstruction: In vitro and in vivo results.

M. Heiland, M. Barbeck, S. Ghanaati, 2017, Journal of biomedical materials research. Part B, Applied biomaterials.

A modified size effect model for brittle nonmetallic materials

H. Fischer, R. Marx, W. Rentzsch, 2002 .

Assembly of thin-walled, cell-laden hydrogel conduits inflated with perfluorocarbon

H. Fischer, A. Blaeser, D. F. D. Campos, 2014 .

Influence of preparation of ceramic SEVNB specimens on fracture toughness testing results.

R. Telle, H. Fischer, A. Waindich, 2008, Dental materials : official publication of the Academy of Dental Materials.

Scaffolds for bone healing: concepts, materials and evidence.

H. Fischer, T. Pufe, H. Pape, 2011, Injury.

Bone regeneration induced by a 3D architectured hydrogel in a rat critical-size calvarial defect.

K. Langen, F. Kiessling, A. Lendlein, 2017, Biomaterials.

3D Printable Gelatin Methacryloyl (GelMA)-Dextran Aqueous Two-Phase System with Tunable Pores Structure and Size Enables Physiological Behavior of Embedded Cells In Vitro.

H. Fischer, W. Richtering, G. Ben Messaoud, 2023, Small.

Adhesion of human mesenchymal stem cells can be controlled by electron beam-microstructured titanium alloy surfaces during osteogenic differentiation

H. Fischer, D. F. Duarte Campos, U. Reisgen, 2015, Biomedizinische Technik. Biomedical engineering.