V. Topa

发表

Kalman filtering based on the maximum correntropy criterion in the presence of non-Gaussian noise

Dan Simon, C. Boianceanu, G. Mey, 2016 .

Multi-ion transport and reaction model used to improve the understanding of local current density measurements in presence of concentration gradients around a point current source

V. Topa, S. Lamaka, J. Deconinck, 2014 .

Simulation of the electrode shape change in electrochemical machining based on the level set method

V. Topa, A. Avram, C. Munteanu, 2012 .

CIBSOC Program – Spiral Inductor Inductance Calculation and Layout Optimization

V. Topa, C. Munteanu, C. Pacurar, 2012 .

STUDIES OF INDUCTANCE VARIATION FOR SQUARE SPIRAL INDUCTORS USING CIBSOC SOFTWARE

V. Topa, C. Munteanu, C. Pacurar, 2013 .

Numerical optimization of an electrostatic device based on the 3D XFEM and genetic algorithm

V. Topa, A. Avram, C. Munteanu, 2014, 2014 49th International Universities Power Engineering Conference (UPEC).

Multi‐terminal resistances optimal design using spline boundary elements and genetic algorithms

G. Mey, V. Topa, C. Munteanu, 2001 .

TECHNOLOGIES TO IMPROVE HIGH FREQUENCY CHARACTERISTICS OF INTEGRATED EMI FILTERS

V. Topa, C. Munteanu, A. Racasan, 2007 .

Methods for planar integrated low pass filter performance improvements in high frequency

V. Topa, C. Munteanu, C. Pacurar, 2014, 2014 International Conference and Exposition on Electrical and Power Engineering (EPE).

Optimization of the Current Density Distribution in Electrochemical Reactors

V. Topa, A. Avram, C. Munteanu, 2012 .

A transient multi-ion transport model for galvanized steel corrosion protection

V. Topa, J. Deconinck, A. Demeter, 2012 .

Modeling of the 3D Electrode Growth in Electroplating

V. Topa, A. Avram, C. Munteanu, 2013 .

A Robust Method of Choosing a Unique Solution within Pareto Front

V. Topa, B. Mociran, A. Verde, 2019, 2019 International Conference on Clean Electrical Power (ICCEP).

The Analysis, Modelling and Comparison between Circular and Rectangular Patch Antennas

V. Topa, C. Munteanu, C. Pacurar, 2020, 2020 International Conference and Exposition on Electrical And Power Engineering (EPE).

Deep Learning for Short-Term Load Forecasting—Industrial Consumer Case Study

V. Topa, A. Cziker, S. Ungureanu, 2021, Applied Sciences.

Steady-state analysis of the nickel oxide in neutral and weakly alkaline solutions

V. Topa, J. Deconinck, D. Deconinck, 2013 .

3D ELECTRODE SHAPE CHANGE SIMULATION IN ELECTROPLATING

Calin Munteanu, Marius Purcar, Vasile Topa, 2013 .

Modelling Thermally-Induced Mechanical Faults in Power Integrated Circuits Assemblies

V. Topa, M. Purcar, R. Onet, 2020, 2020 IEEE 26th International Symposium for Design and Technology in Electronic Packaging (SIITME).

A Simplified Model for Approximating the Vias in the Thermo-Mechanical Simulation of Metal-Oxide-Semiconductor Structures

V. Topa, C. Munteanu, M. Purcar, 2019, 2019 8th International Conference on Modern Power Systems (MPS).

A Simple Metal-Semiconductor Substructure Model for the Thermal Induced Fatigue Simulation in Power Integrated Circuits

Ciprian Florea, Dan Simon, C. Boianceanu, 2018, Proceedings of the 1st International Conference on Numerical Modelling in Engineering.

A study of adaptive mesh refinement techniques for an efficient capture of the thermo-mechanical phenomena in power integrated circuits

Marius Purcar, Cristian Boianceanu, Vasile Topa, 2017, 2017 International Semiconductor Conference (CAS).

Shape optimization approach based on the extended finite element method

Calin Munteanu, Marius Purcar, Vasile Topa, 2012 .

A practical way to model convection in non-agitated electrolytes

V. Topa, J. Deconinck, O. Dolgikh, 2013 .

Influence of the applied potential and pH on the steady-state behavior of the iron oxide

V. Topa, J. Deconinck, A. Demeter, 2012 .

Fast Marching Method for Unstructured Meshes

C. Curta, R. Ciupa, V. Topa, 2022 .

Improved framework for Monte Carlo numerical evaluations in field interference problems

Andrei Ceclan, Levente Czumbil, Octavian Creţ, 2012 .

High Frequency Analysis of the Influence of YagiUda Antenna on the Human head

V. Topa, C. Munteanu, C. Pacurar, 2020, 2020 International Conference and Exposition on Electrical And Power Engineering (EPE).

The Optimization of the Interior Permanent Magnetic Motor Case Study

V. Topa, B. Mociran, 2023, Electronics.

Analysis for Non-Residential Short-Term Load Forecasting Using Machine Learning and Statistical Methods with Financial Impact on the Power Market

V. Topa, A. Cziker, S. Ungureanu, 2021, Energies.

Electromagnetic field model for the numerical computation of voltages induced on buried pipelines by high voltage overhead power lines

Marius Purcar, Vasile Topa, Adina Racasan, 2012 .

Analysis of the electromagnetic interferences between overhead power lines and buried pipelines

V. Topa, M. Purcar, C. Munteanu, 2012, International Symposium on Electromagnetic Compatibility - EMC EUROPE.

Inductance calculation and layout optimization for planar spiral inductors

V. Topa, C. Munteanu, A. Racasan, 2012, 2012 13th International Conference on Optimization of Electrical and Electronic Equipment (OPTIM).

Implementation of an Accurate Measurement Method for the Spatial Distribution of the Electromagnetic Field in a WPT System

V. Topa, A. Tulbure, Calin Petrascu, 2023, Applied Sciences.

Efficient Computational Methodology of Thermo-Mechanical Phenomena in the Metal System of Power ICs

C. Boianceanu, V. Topa, M. Purcar, 2019, 2019 25th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC).

3D electromagnetic field model for numerical analysis of the electromagnetic interferences between overhead power lines and pipelines

V. Topa, C. Munteanu, A. Racasan, 2011, 11th International Conference on Electrical Power Quality and Utilisation.

Actual Stage of the Research Regarding the AC Interferences on Common Corridors

Calin Munteanu, Marius Purcar, Vasile Topa, 2009 .

Reliability Analysis for Power Devices Which Undergo Fast Thermal Cycling

Cristian Boianceanu, Vasile Topa, Gilbert De Mey, 2016, IEEE Transactions on Device and Materials Reliability.