N. Sandler

发表

Assessment of Recent Process Analytical Technology (PAT) Trends: A Multiauthor Review

Richard D. Braatz, Yannick Maret, Niklas Sandler, 2015 .

Rapid Particle Size Measurement Using 3D Surface Imaging

N. Sandler, O. Antikainen, J. Yliruusi, 2011, AAPS PharmSciTech.

Particle sizing measurements in pharmaceutical applications: comparison of in-process methods versus off-line methods.

Ana F T Silva, T. De Beer, J. Remon, 2013, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Prediction of granule packing and flow behavior based on particle size and shape analysis.

N. Sandler, David M. Wilson, 2010, Journal of pharmaceutical sciences.

Real-time image-based investigation of spheronization and drying phenomena using different pellet formulations.

T. De Beer, J. Remon, C. Vervaet, 2011, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Perspectives of Printing Technologies in Continuous Drug Manufacturing

Niklas Sandler, Petri Ihalainen, N. Sandler, 2017 .

Near infrared spectroscopy in the development of solid dosage forms

N. Sandler, E. Räsänen, 2007, The Journal of pharmacy and pharmacology.

Application of Crustacean Chitin as a Co-diluent in Direct Compression of Tablets

N. Sandler, O. Antikainen, J. Yliruusi, 2010, AAPS PharmSciTech.

Effect of Moisture on Powder Flow Properties of Theophylline

N. Sandler, J. Yliruusi, J. Heinämäki, 2010, Pharmaceutics.

Three-dimensional printing of drug-eluting implants: preparation of an antimicrobial polylactide feedstock material.

H. M. Nielsen, J. Rantanen, A. Bohr, 2015, Journal of pharmaceutical sciences.

Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices.

N. Sandler, J. Salonen, E. Mäkilä, 2016, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Application of a handheld NIR spectrometer in prediction of drug content in inkjet printed orodispersible formulations containing prednisolone and levothyroxine.

N. Sandler, Maren Preis, D. Desai, 2017, International journal of pharmaceutics.

Pellet manufacturing by extrusion-spheronization using process analytical technology

J. Rantanen, N. Sandler, J. Yliruusi, 2005, AAPS PharmSciTech.

Inkjet Printing of Drug-Loaded Mesoporous Silica Nanoparticles—A Platform for Drug Development

T. De Beer, N. Sandler, J. Rosenholm, 2017, Molecules.

Development of Oromucosal Dosage Forms by Combining Electrospinning and Inkjet Printing.

Maren Preis, Niklas Sandler, Mirja Palo, 2017, Molecular pharmaceutics.

Inhibitory Activity of the Isoflavone Biochanin A on Intracellular Bacteria of Genus Chlamydia and Initial Development of a Buccal Formulation

N. Sandler, P. Vuorela, J. Salonen, 2014, PloS one.

Image analysis by pulse coupled neural networks (PCNN)—a novel approach in granule size characterization

N. Sandler, O. Antikainen, J. Yliruusi, 2007, The Journal of pharmacy and pharmacology.

Inkjet printing of Chitlac-nanosilver—a method to create functional coatings for non-metallic bone implants

Niklas Sandler, Niko Moritz, Pekka K Vallittu, 2014, Biofabrication.

Inkjet printing of antiviral PCL nanoparticles and anticancer cyclodextrin inclusion complexes on bioadhesive film for cervical administration.

Niklas Sandler, Henrika Wickström, Yeşim Aktaş, 2017, International journal of pharmaceutics.

Fabrication of drug-loaded edible carrier substrates from nanosuspensions by flexographic printing.

Niklas Sandler, Jarno Salonen, Natalja Genina, 2015, International journal of pharmaceutics.

A low-cost paper-based platform for fast and reliable screening of cellular interactions with materials.

N Sandler, M. Toivakka, N. Sandler, 2020, Journal of materials chemistry. B.

Benefits and Prerequisites Associated with the Adoption of Oral 3D-Printed Medicines for Pediatric Patients: A Focus Group Study among Healthcare Professionals

N. Sandler, M. Airaksinen, P. Lahdenne, 2020, Pharmaceutics.

Quetiapine and risperidone in outpatients with psychotic disorders: Results of the QUEST trial

N. Sandler, L. Ginsberg, M. Reinstein, 1999, European Neuropsychopharmacology.

Bi-Layered Polymer Carriers with Surface Modification by Electrospinning for Potential Wound Care Applications

N. Sandler, K. Kogermann, Mirja Palo, 2019, Pharmaceutics.

Compounding Tailored Veterinary Chewable Tablets Close to the Point-of-Care by Means of 3D Printing

N. Sandler, Xiaoju Wang, Erica Sjöholm, 2022, Pharmaceutics.

Evaluation of inhaler handling-errors, inhaler perception and preference with Spiromax, Easyhaler and Turbuhaler devices among healthy Finnish volunteers: a single site, single visit crossover study (Finhaler)

N. Sandler, P. Santtila, J. Holländer, 2016, BMJ Open Respiratory Research.

Rapid formulation screening with a Multipart Microscale Fluid bed Powder processor.

N. Sandler, O. Antikainen, Juha Hatara, 2011, Pharmaceutical development and technology.

Perception of the Professional Knowledge of and Education on the Medical Technology Products among the Pharmacists in the Baltic and Nordic Countries—A Cross-Sectional Exploratory Study

N. Sandler, J. Heinämäki, K. Vainio, 2016, Pharmacy.

Evaluation of Inhaler Technique Mastery and Handling Errors With Spiromax®, Easyhaler®, And Turbuhaler® Devices (Finhaler).

N. Sandler, P. Santtila, J. Holländer, 2015, Value in health : the journal of the International Society for Pharmacoeconomics and Outcomes Research.

Non-destructive assessment of mechanical properties of microcrystalline cellulose compacts.

N. Sandler, O. Antikainen, J. Yliruusi, 2015, International journal of pharmaceutics.

Processing of pharmaceutical materials by electrospraying under reduced pressure

N. Sandler, Jorma Roine, M. Nyström, 2015, Drug development and industrial pharmacy.

Semi-Solid Extrusion 3D Printing of Tailored ChewTs for Veterinary Use - A Focus on Spectrophotometric Quantification of Gabapentin.

N. Sandler, Xiaoju Wang, Erica Sjöholm, 2022, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

The influence of various excipients on the conversion kinetics of carbamazepine polymorphs in aqueous suspension

C. Strachan, K. Gordon, J. A. Zeitler, 2007, The Journal of pharmacy and pharmacology.

Using Ion-Selective Electrodes to Study the Drug Release from Porous Cellulose Matrices

N. Sandler, J. Bobacka, N. Genina, 2012, Pharmaceutics.

Visualizing the conversion of carbamazepine in aqueous suspension with and without the presence of excipients: a single crystal study using SEM and Raman microscopy.

C. Strachan, K. Gordon, T. Rades, 2006, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Pneumatic dry granulation: potential to improve roller compaction technology in drug manufacture

Niklas Sandler, Robert Frank Lammens, N. Sandler, 2011, Expert opinion on drug delivery.

Investigation of dissolved cellulose in development of buccal discs for oromucosal drug delivery

N. Sandler, Maren Preis, Poonam Trivedi, 2018, Pharmaceutical development and technology.

3D-Printed Veterinary Dosage Forms—A Comparative Study of Three Semi-Solid Extrusion 3D Printers

N. Sandler, Xiaoju Wang, Erica Sjöholm, 2020, Pharmaceutics.

Mechanical characterization and ex vivo evaluation of anticancer and antiviral drug printed bioadhesive film for the treatment of cervical cancer

Niklas Sandler, Murat Şen, Yeşim Aktaş, 2019, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

The effect of HPMC and MC as pore formers on the rheology of the implant microenvironment and the drug release in vitro.

J. Rantanen, A. Bohr, J. Boetker, 2017, Carbohydrate polymers.

Vascularized 3D printed scaffolds for promoting bone regeneration.

Niklas Sandler, Jin Qi, Yu Shrike Zhang, 2019, Biomaterials.

Three-Dimensional Printing of Wood-Derived Biopolymers: A Review Focused on Biomedical Applications

Niklas Sandler, Chunlin Xu, Stefan Willför, 2018, ACS sustainable chemistry & engineering.

Pharmaceutical co-crystals–an opportunity for drug product enhancement

I. Miroshnyk, Sabiruddin Mirza, N. Sandler, 2009, Expert opinion on drug delivery.

Novel biorenewable composite of wood polysaccharide and polylactic acid for three dimensional printing.

N. Sandler, Maren Preis, J. Hemming, 2018, Carbohydrate polymers.

Quantification of caffeine and loperamide in printed formulations by infrared spectroscopy

N. Sandler, J. Heinämäki, K. Kogermann, 2016 .

Oromucosal films: from patient centricity to production by printing techniques

Niklas Sandler, Heidi Öblom, Yu Tian, 2019, Expert opinion on drug delivery.

QR encoded smart oral dosage forms by inkjet printing.

Niklas Sandler, Jukka Rantanen, Natalja Genina, 2018, International journal of pharmaceutics.

Dehydration of Nitrofurantoin Monohydrate during Melt Extrusion

J. Rantanen, N. Sandler, A. Bond, 2017 .

3D-Printed Isoniazid Tablets for the Treatment and Prevention of Tuberculosis—Personalized Dosing and Drug Release

Maren Preis, Niklas Sandler, Heidi Öblom, 2019, AAPS PharmSciTech.

Towards fabrication of 3D printed medical devices to prevent biofilm formation.

Niklas Sandler, Natalja Genina, Ari Rosling, 2014, International journal of pharmaceutics.

Behavior of printable formulations of loperamide and caffeine on different substrates--effect of print density in inkjet printing.

Niklas Sandler, Natalja Genina, Mirja Palo, 2013, International journal of pharmaceutics.

A Focus Group Study about Oral Drug Administration Practices at Hospital Wards—Aspects to Consider in Drug Development of Age-Appropriate Formulations for Children

N. Sandler, M. Airaksinen, P. Lahdenne, 2020, Pharmaceutics.

Towards Printed Pediatric Medicines in Hospital Pharmacies: Comparison of 2D and 3D-Printed Orodispersible Warfarin Films with Conventional Oral Powders in Unit Dose Sachets

Niklas Sandler, Heidi Öblom, Erica Sjöholm, 2019, Pharmaceutics.

Inkjet printing of drug substances and use of porous substrates-towards individualized dosing.

Niklas Sandler, Jouko Peltonen, Anni Määttänen, 2011, Journal of pharmaceutical sciences.

Application of a colorimetric technique in quality control for printed pediatric orodispersible drug delivery systems containing propranolol hydrochloride.

Maren Preis, Niklas Sandler, Natalja Genina, 2016, International journal of pharmaceutics.

3D-Printed Isoniazid Tablets for the Treatment and Prevention of Tuberculosis—Personalized Dosing and Drug Release

N. Sandler, M. Repka, Maren Preis, 2019, AAPS PharmSciTech.

Photometric imaging in particle size measurement and surface visualization.

Niklas Sandler, N. Sandler, 2011, International journal of pharmaceutics.

Three-Dimensional Printed PCL-Based Implantable Prototypes of Medical Devices for Controlled Drug Delivery.

Niklas Sandler, Natalja Genina, Ari Rosling, 2016, Journal of pharmaceutical sciences.

Perspective: Concepts of printing technologies for oral film formulations.

Maren Preis, Joerg Breitkreutz, Niklas Sandler, 2015, International journal of pharmaceutics.

Influence of sample characteristics on quantification of carbamazepine hydrate formation by X-ray powder diffraction and Raman spectroscopy.

C. Strachan, K. Gordon, T. Rades, 2007, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Improvement of dissolution rate of indomethacin by inkjet printing.

Niklas Sandler, Thomas Rades, Natalja Genina, 2015, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Colorimetry as Quality Control Tool for Individual Inkjet-Printed Pediatric Formulations

Maren Preis, Niklas Sandler, Jukka Rantanen, 2016, AAPS PharmSciTech.

Additive manufacturing of personalized orodispersible warfarin films.

Niklas Sandler, Erica Sjöholm, N. Sandler, 2019, International journal of pharmaceutics.

Stencil Printing—A Novel Manufacturing Platform for Orodispersible Discs

Niklas Sandler, Martti Toivakka, Henrika Wickström, 2020, Pharmaceutics.

Evaluation of different substrates for inkjet printing of rasagiline mesylate.

Niklas Sandler, Natalja Genina, Jörg Breitkreutz, 2013, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

A step toward development of printable dosage forms for poorly soluble drugs.

Niklas Sandler, Jukka Rantanen, Natalja Genina, 2013, Journal of pharmaceutical sciences.

Tailoring controlled-release oral dosage forms by combining inkjet and flexographic printing techniques.

Niklas Sandler, Natalja Genina, Ivan Kassamakov, 2012, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Anionic cellulose beads for drug encapsulation and release

N. Sandler, P. Fardim, J. Trygg, 2014, Cellulose.

Tailored Approaches in Drug Development and Diagnostics: From Molecular Design to Biological Model Systems

Ion Petre, Maren Preis, Niklas Sandler, 2017, Advanced healthcare materials.

Solid-State Properties and Controlled Release of Ranitidine Hydrochloride from Tailored Oxidised Cellulose Beads

N. Sandler, P. Fardim, J. Trygg, 2015 .

Prediction of quality attributes of continuously produced granules using complementary pat tools.

Niklas Sandler, Jean Paul Remon, Margot Fonteyne, 2012, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Influence of raw material properties upon critical quality attributes of continuously produced granules and tablets.

Niklas Sandler, Jukka Rantanen, Jean Paul Remon, 2014, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

3D printed UV light cured polydimethylsiloxane devices for drug delivery

Niklas Sandler, Niko Moritz, Jouko Yliruusi, 2017, International journal of pharmaceutics.

Investigation of the powder flow behaviour of binary mixtures of microcrystalline celluloses and paracetamol

N. Sandler, J. Yliruusi, Ira Soppela, 2010 .

Phase transformations of erythromycin A dihydrate during pelletisation and drying.

Niklas Sandler, Jukka Rantanen, Jouko Yliruusi, 2007, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Phase transformation of erythromycin A dihydrate during fluid bed drying.

Niklas Sandler, Jukka Rantanen, Jouko Yliruusi, 2008, Journal of pharmaceutical sciences.

UV-visible absorption spectroscopy for in-line API concentration measurement in nanoparticle production process using Controlled Expansion of Supercritical Solution (CESS®)

E. Hæggström, T. Vainikka, N. Sandler, 2022, Journal of Pharmaceutical and Biomedical Analysis.

Printing technologies in fabrication of drug delivery systems

Niklas Sandler, Natalja Genina, Petri Ihalainen, 2013, Expert opinion on drug delivery.

Ink-jet printing of pharmaceuticals

N. Sandler, N. Genina, T. Widmaier, 2012 .

3D printed drug delivery devices: perspectives and technical challenges

Niklas Sandler, Jouko Yliruusi, Mirja Palo, 2017, Expert review of medical devices.

Printed Drug-Delivery Systems for Improved Patient Treatment.

Maren Preis, Niklas Sandler, N. Sandler, 2016, Trends in pharmacological sciences.

Determination of segregation tendency of granules using surface imaging.

Niklas Sandler, Satu Lakio, N. Sandler, 2012, Journal of pharmaceutical sciences.

Screening for differences in the amorphous state of indomethacin using multivariate visualization.

Niklas Sandler, Thomas Rades, Jouko Yliruusi, 2007, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Influence of polymorphic form, morphology, and excipient interactions on the dissolution of carbamazepine compacts.

J. Rantanen, C. Strachan, K. Gordon, 2007, Journal of pharmaceutical sciences.

Rapid interferometric imaging of printed drug laden multilayer structures

Niklas Sandler, Tuomo Ylitalo, Natalja Genina, 2014, Scientific Reports.

Visualizing Solvent Mediated Phase Transformation Behavior of Carbamazepine Polymorphs by Principal Component Analysis

T. Rades, N. Sandler, F. Tian, 2008, AAPS PharmSciTech.

Microfluidic templated mesoporous silicon-solid lipid microcomposites for sustained drug delivery.

Niklas Sandler, Jarno Salonen, Hélder A Santos, 2013, ACS applied materials & interfaces.

Tailored beads made of dissolved cellulose--investigation of their drug release properties.

J. Rantanen, N. Sandler, P. Vuorela, 2013, International journal of pharmaceutics.

3D-Printed Veterinary Dosage Forms – A Comparative Study of Three Semi-Solid Extrusion Printers

N. Sandler, Xiaoju Wang, Erica Sjöholm, 2020 .

Hyperspectral imaging in quality control of inkjet printed personalised dosage forms.

Niklas Sandler, Natalja Genina, Mathieu Marmion, 2015, International journal of pharmaceutics.

Designing Printable Medicinal Products: Solvent System and Carrier‐Substrate Screening

Niklas Sandler, Jukka Rantanen, Natalja Genina, 2014 .

Towards fabrication of 3D printed medical devices to prevent biofilm formation.

N. Sandler, A. Fallarero, P. Vuorela, 2014, International journal of pharmaceutics.

Three-Dimensional Printing of Wood-Derived Biopolymers: A Review Focused on Biomedical Applications

N. Sandler, Xiaoju Wang, Wenyang Xu, 2018, ACS sustainable chemistry & engineering.

The effect of HPMC and MC as pore formers on the rheology of the implant microenvironment and the drug release in vitro.

J. Rantanen, A. Bohr, J. Boetker, 2017, Carbohydrate polymers.

Powder flow from an intermediate bulk container - Discharge predictions and experimental evaluation.

N. Sandler, P. Tajarobi, H. Wikström, 2021, International journal of pharmaceutics.

Prediction of Tablet Film-coating Thickness Using a Rotating Plate Coating System and NIR Spectroscopy

Niklas Sandler, Jouko Yliruusi, Clare Strachan, 2008, AAPS PharmSciTech.

Phase transformation of erythromycin A dihydrate during fluid bed drying.

J. Rantanen, I. Miroshnyk, N. Sandler, 2008, Journal of pharmaceutical sciences.

Photometric imaging in particle size measurement and surface visualization.

N. Sandler, 2011, International journal of pharmaceutics.

Printing technologies for biomolecule and cell-based applications.

Niklas Sandler, Petri Ihalainen, Anni Määttänen, 2015, International journal of pharmaceutics.