Janice M. Dulieu-Barton

发表

Developing pulse phase thermography as a characterisation tool for grossly sculpted surfaces

Robert J.K. Wood, K. C. Ang, Ling Wang, 2007 .

Stress based non-destructive evaluation using thermographic approaches: From laboratory trials to on-site assessment

Janice M. Dulieu-Barton, R. C. Tighe, G. P. Howell, 2016 .

Design and production issues concerning bonded joints for segmented FRP composite hulls

R. A. Shenoi, Janice M. Dulieu-Barton, H. K. Jeong, 2003 .

Non-adiabatic behaviour boundaries in thermoelastic stress analysis

Janice M. Dulieu-Barton, Simon Quinn, 2001 .

Speckle Pattern Characterisation for High Resolution Digital Image Correlation

Janice M. Dulieu-Barton, Stephen Boyd, G. Crammond, 2011 .

Through Thickness Stress Distributions in Pultruded GRP Materials

Ole Thybo Thomsen, Janice M. Dulieu-Barton, Stephen Boyd, 2010 .

The use of a lock-in amplifier to apply digital image correlation to cyclically loaded components

Janice M. Dulieu-Barton, Simon Quinn, R. K. Fruehmann, 2015 .

Full Field Strain Analysis of Aircraft Sandwich Structures

Janice M. Dulieu-Barton, D. A. Crump, 2008 .

Development of a Temperature Calibration Device for Thermoelastic Stress Analysis

Janice M. Dulieu-Barton, Simon Quinn, P. R. Cunningham, 2004 .

The application of thermoelastic stress analysis to full-scale aerospace structures

Janice M. Dulieu-Barton, Simon Quinn, R. K. Fruehmann, 2012 .

Thermoelastic stress analysis as a validation tool for FEA of composite tee joint

R. A. Shenoi, Janice M. Dulieu-Barton, J. S. Earl, 2004 .

Full-scale performance assessment of aircraft secondary sandwich structure using thermoelastic stress analysis

J. Savage, Janice M. Dulieu-Barton, D. A. Crump, 2009 .

An experimental approach to stress separation in thermoelastic stress analysis

Janice M. Dulieu-Barton, P Stanley, T. S. Phan, 2007 .

Assessing the Feasibility of Monitoring Strain in Historical Tapestries Using Digital Image Correlation

Dinah Eastop, Janice M. Dulieu-Barton, A. R. Chambers, 2010 .

Assessing the Feasibility of Monitoring the Condition of Historic Tapestries Using Engineering Techniques

Janice M. Dulieu-Barton, Melin Sahin, A. R. Chambers, 2007 .

Analysis of full-scale aerospace sandwich panels under pressure loading

J. Savage, Janice M. Dulieu-Barton, D. A. Crump, 2008 .

Use of DIC for the failure analysis of complex composite structures

Janice M. Dulieu-Barton, Stephen Boyd, G. Crammond, 2013 .

Mechanical testing for condition assessment of tapestries

Dinah Eastop, Frances Lennard, Janice M. Dulieu-Barton, 2006 .

Use of pre-formed composites for cost-effective fast marine craft construction

R. A. Shenoi, Alexander Day, Janice M. Dulieu-Barton, 2002 .

A Full-Field Stress Based Damage Assessment Approach for In Situ Inspection of Composite Structures

Janice M. Dulieu-Barton, Simon Quinn, R. K. Fruehmann, 2013 .

Development of thermoelastic stress analysis as a non-destructive evaluation tool

Janice M. Dulieu-Barton, Simon Quinn, R. K. Fruehmann, 2009 .

Manufacturing options for secondary aircraft CFRP sandwich components

J. Savage, Janice M. Dulieu-Barton, D. A. Crump, 2007 .

Approaches to Synchronise Conventional Measurements with Optical Techniques at High Strain Rates

Janice M. Dulieu-Barton, D. A. Crump, Marco L Longana, 2011 .

Thermoelastic stress analysis of composite piping components

Janice M. Dulieu-Barton, N. Sathon, 2004 .

Dynamic analysis of composite marine structures using full-field measurement techniques

Janice M. Dulieu-Barton, Stephen Boyd, G. Crammond, 2014 .

Sub-surface damage location and identification using infra-red techniques

Janice M. Dulieu-Barton, P. R. Cunningham, T. R. Emery, 2009 .

In-service TSA of composite structures using transient loading

Janice M. Dulieu-Barton, Simon Quinn, R. K. Fruehmann, 2008 .

Long term condition monitoring of tapestries using image correlation

Dinah Eastop, Frances Lennard, Janice M. Dulieu-Barton, 2013 .

Thermoelastic stress analysis of damage mechanisms in composite materials

Janice M. Dulieu-Barton, T. R. Emery, J. Dulieu‐Barton, 2010 .

Mechanical testing and its role in the condition assessment of tapestries

Dinah Eastop, Frances Lennard, Janice M. Dulieu-Barton, 2005 .

Prediction of fatigue life in composite materials using thermoelastic stress analysis

Janice M. Dulieu-Barton, Trystan Emery, 2008 .

Optical fibre Bragg grating strain sensors

Janice M. Dulieu-Barton, Simon Quinn, J. Dulieu‐Barton, 2009 .

Photoelastic Stress Analysis of a Leaf-spring Eyelet

Janice M. Dulieu-Barton, Peter Stanley, 2005 .

Stress analysis of finger joints in pultruded GRP materials

Janice M. Dulieu-Barton, J. Dulieu‐Barton, Stephen Boyd, 2006 .

Identification of Crack-Tip Parameters Using Thermoelastic Isopachics and Differential Evolution

Keith Worden, Janice M. Dulieu-Barton, 2003 .

Determination of mechanical properties of PVC foam using a modified Arcan fixture

Ole Thybo Thomsen, Siavash Talebi Taher, Janice M. Dulieu-Barton, 2012 .

Modelling and evaluation of pulsed and pulse phase thermography through application of composite and metallic case studies

Janice M. Dulieu-Barton, Simon Quinn, Rachael C. Waugh, 2014 .

Determination of Stress Concentration Factors for Holes in Cylinders Using Thermoelastic Stress Analysis

Janice M. Dulieu-Barton, Simon Quinn, 2002 .

Enhancement of the electrical and thermal properties of unidirectional carbon fibre/epoxy laminates through the addition of graphene oxide

Janice M. Dulieu-Barton, Igor O. Golosnoy, I. Golosnoy, 2019, Journal of Materials Science.

Proceedings of the 15th European Conference on Composite Materials

Fabrice Pierron, Janice M. Dulieu-Barton, Marco L Longana, 2012 .

The effect of microstructure on energy dissipation in 316L stainless steel

Fabrice Pierron, Janice M. Dulieu-Barton, F. Pierron, 2017 .

Full-field experimental stress/strain analysis of sandwich structures

Janice M. Dulieu-Barton, 2008 .

Mechanical Properties of a Typical Stereolithography Resin

Janice M. Dulieu-Barton, J. Dulieu‐Barton, M Fulton, 2000 .

The Influence of Graphene Oxide on the electrical conduction in unidirectional CFRP laminates for wind turbine blade applications

Ole Thybo Thomsen, Janice M. Dulieu-Barton, Igor O. Golosnoy, 2017 .

Validation of a complex composite construction using thermoelastic stress analysis

R. A. Shenoi, Janice M. Dulieu-Barton, J. S. Grigg, 2000 .

On the thermoelastic response of woven composite materials

Janice M. Dulieu-Barton, Simon Quinn, R. K. Fruehmann, 2008 .

Condition Monitoring of Textiles Using Optical Techniques

Frances Lennard, Janice M. Dulieu-Barton, A. R. Chambers, 2009 .

Identification of impact damage in CRRP laminates using the NDT approach

Keith Worden, Wieslaw J. Staszewski, Stephen Pierce, 2009 .

Optical fibre sensors for monitoring damage in historic tapestries

Dinah Eastop, Frances Lennard, Janice M. Dulieu-Barton, 2008 .

Evaluation of Sub-Surface Stresses Using Thermoelastic Stress Analysis

Janice M. Dulieu-Barton, J. Dulieu‐Barton, Nuttaphon Sathon, 2007 .

Evaluating the localised through-thickness load transfer and damage initiation in a composite joint using digital image correlation

Janice M. Dulieu-Barton, G. Crammond, Stephen Boyd, 2014 .

Determination of hygrothermal ageing effects in sandwich construction joints using thermoelastic stress analysis

R. A. Shenoi, Janice M. Dulieu-Barton, J. S. Earl, 2003 .

Genetic identification of crack-tip parameters using thermoelastic isopachics

Keith Worden, Janice M. Dulieu-Barton, 2003 .

The effect of temperature on the failure modes of polymer foam cored sandwich structures

Ole Thybo Thomsen, Janice M. Dulieu-Barton, Shufeng Zhang, 2015 .

Automated counting of off-axis tunnelling cracks using digital image processing

Lars C. T. Overgaard, Ole Thybo Thomsen, Jens Ammitzbøll Glud, 2016 .

Real-time through-thickness and in-plane strain measurement in carbon fibre reinforced polymer composites using planar optical Bragg gratings

Christopher Holmes, Janice M. Dulieu-Barton, C. Holmes, 2020, Optics and Lasers in Engineering.

A temperature correction methodology for quantitative thermoelastic stress analysis and damage assessment

Janice M. Dulieu-Barton, P. R. Cunningham, Simon Quinn, 2006 .

On impact damage detection and quantification for CFRP laminates using structural response data only

Keith Worden, Wieslaw J. Staszewski, Stephen Pierce, 2011 .

Assessment of fatigue damage evolution in woven composite materials using infra-red techniques

Janice M. Dulieu-Barton, Simon Quinn, R. K. Fruehmann, 2010 .

Identification of kissing defects in adhesive bonds using infrared thermography

Janice M. Dulieu-Barton, Simon Quinn, J. Dulieu‐Barton, 2016 .

Development of a Finite Element Model for Analysis of Pultruded Structures Using Thermoelastic Data

Ole Thybo Thomsen, Janice M. Dulieu-Barton, A. Gherardi, 2008 .

Deformation and strain measurement techniques for the inspection of damage in works of art

Dinah Eastop, Frances Lennard, Janice M. Dulieu-Barton, 2005 .

Damage Monitoring of Composite Materials Using Pulsed Phase Thermography and Thermoelastic Stress Analysis

Janice M. Dulieu-Barton, T. R. Emery, J. Dulieu‐Barton, 2007 .

Bidirectional Thermo-Mechanical Properties of Foam Core Materials Using DIC

Ole Thybo Thomsen, Siavash Talebi Taher, Janice M. Dulieu-Barton, 2011 .

Application of digital image correlation to tapestry and textile condition assessment

Dinah Eastop, Frances Lennard, Janice M. Dulieu-Barton, 2009 .

Impact damage detection and quantification in CFRP laminates; a precursor to machine learning

Keith Worden, Wieslaw J. Staszewski, Stephen Pierce, 2009 .

Initial Studies for AE Characterisation of Damage in Composite Materials

Janice M. Dulieu-Barton, M.R. Venturini Autieri, 2006 .

Finite Element Modelling of Pulse Phase Thermography for Defect Detection

Janice M. Dulieu-Barton, Simon Quinn, Rachael C. Waugh, 2013 .