J. Tipper

发表

A comparison of the wear and debris generation of GUR 1120 (compression moulded) and GUR 4150HP (ram extruded) ultra high molecular weight polyethylene.

B. Wroblewski, J. Fisher, M. Stone, 1999, Bio-medical materials and engineering.

Wear, Debris, and Biologic Activity of Cross-linked Polyethylene in the Knee: Benefits and Potential Concerns

J. Fisher, M. Stone, E. Ingham, 2004, Clinical orthopaedics and related research.

The Effect of Anterior-Posterior Shear on the Wear of CHARITÉ Total Disc Replacement

T. Brown, J. Fisher, E. Ingham, 2012, Spine.

Comparison of wear, wear debris and functional biological activity of moderately crosslinked and non-crosslinked polyethylenes in hip prostheses

J. Fisher, M. Stone, E. Ingham, 2002, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Quantitative analysis of polyethylene wear debris, wear rate and head damage in retrieved Charnley hip prostheses

B. Wroblewski, J. Fisher, M. Stone, 2000, Journal of materials science. Materials in medicine.

Identification of nanometre-sized ultra-high molecular weight polyethylene wear particles in samples retrieved in vivo.

J. Fisher, M. Stone, E. Ingham, 2008, The Journal of bone and joint surgery. British volume.

Characterisation of wear debris from UHMWPE on zirconia ceramic, metal-on-metal and alumina ceramic-on-ceramic hip prostheses generated in a physiological anatomical hip joint simulator

J. Fisher, M. Stone, E. Ingham, 2001 .

Long-term wear of ceramic matrix composite materials for hip prostheses under severe swing phase microseparation.

J. Fisher, T. Stewart, E. Ingham, 2003, Journal of biomedical materials research. Part B, Applied biomaterials.

Ultra High Molecular Weight Polyethylene/Graphene Oxide Nanocomposites: Thermal, Mechanical and Wettability Characterisation

J. Tipper, R. Joffe, S. Suñer, 2015 .

An in vitro study of the reduction in wear of metal-on-metal hip prostheses using surface-engineered femoral heads

J. Fisher, T. Stewart, M. Stone, 2002, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Biological effects of wear particles generated in total joint replacements: Trends and future prospects

J. Tipper, S. Suñer, N. Emami, 2012 .

Wear of crosslinked polyethylene under different tribological conditions

Zhongmin Jin, John Fisher, Eileen Ingham, 2006, Journal of materials science. Materials in medicine.

Antibiotic resistant propionibacteria in acne: need for policies to modify antibiotic usage.

W. Cunliffe, J. Tipper, A. Layton, 1993, BMJ.

Interaction of micron and nano-sized particles with cells of the dura mater

J. Fisher, E. Ingham, R. Hall, 2014, Journal of biomedical materials research. Part B, Applied biomaterials.

Biological Effects of Clinically Relevant CoCr Nanoparticles in the Dura Mater: An Organ Culture Study

J. Fisher, E. Ingham, J. Tipper, 2014, Nanomaterials.

Elastic Fibers: The Missing Key to Improve Engineering Concepts for Reconstruction of the Nucleus Pulposus in the Intervertebral Disc.

J. Tipper, J. Tavakoli, A. Diwan, 2020, Acta biomaterialia.

Mechanical Properties and Three-Dimensional Topological Characterisation of Micron, Submicron and Nanoparticles from Artificial Joints

Zhongxiao Peng, J. Tipper, Jingping Wu, 2013, Tribology Letters.

Quantitative analysis of the wear and wear debris from low and high carbon content cobalt chrome alloys used in metal on metal total hip replacements

J. Fisher, M. Stone, E. Ingham, 1999, Journal of materials science. Materials in medicine.

Evaluation of a new methodology to simulate damage and wear of polyethylene hip replacements subjected to edge loading in hip simulator testing.

J. Fisher, J. Tipper, G. Isaac, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

Tribology of Hip Joints from Natural Hip Joints, Cartilage Substitution, Artificial Replacements to Cartilage Tissue Engineering

J. Fisher, E. Ingham, J. Tipper, 2006 .

Developing Novel Fabrication and Optimisation Strategies on Aggregation-Induced Emission Nanoprobe/Polyvinyl Alcohol Hydrogels for Bio-Applications

J. Tipper, C. Raston, M. Warkiani, 2022, Molecules.

Isolation and characterization of UHMWPE wear particles down to ten nanometers in size from in vitro hip and knee joint simulators.

J. Fisher, M. Stone, E. Ingham, 2006, Journal of biomedical materials research. Part A.

Current status and future potential of wear-resistant coatings and articulating surfaces for hip and knee implants

C. Persson, R. Hall, J. Tipper, 2022, Materials today. Bio.

Distribution of genes encoding erythromycin ribosomal methylases and an erythromycin efflux pump in epidemiologically distinct groups of staphylococci.

J. Cove, J. Tipper, C. Walters, 1993, The Journal of antimicrobial chemotherapy.

Biological effects of cobalt-chromium nanoparticles and ions on dural fibroblasts and dural epithelial cells.

J. Fisher, E. Ingham, R. Hall, 2013, Biomaterials.

Non-destructive monitoring of viability in an ex vivo organ culture model of osteochondral tissue.

J. Fisher, E. Ingham, R. Hall, 2015, European cells & materials.

Comparison of periprosthetic tissue digestion methods for ultra-high molecular weight polyethylene wear debris extraction.

S. Kurtz, J. Parvizi, J. Tipper, 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

Influence of simulator kinematics on the wear of metal-on-metal hip prostheses

J. Fisher, M. Stone, E. Ingham, 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Hyperbranched polymers tune the physicochemical, mechanical, and biomedical properties of alginate hydrogels

H. Mahmodi, I. Kabakova, J. Tipper, 2022, Materials Today Chemistry.

ALTEN: A High‐Fidelity Primary Tissue‐Engineering Platform to Assess Cellular Responses Ex Vivo

Hanlee P. Ji, S. Grimes, J. Tipper, 2022, Advanced science.

Towards engineering heart tissues from bioprinted cardiac spheroids

Min Ho Lee, I. Kabakova, J. Tipper, 2021, Biofabrication.

Nanometre size wear debris generated from crosslinked and non-crosslinked ultra high molecular weight polyethylene in artificial joints

J. Fisher, E. Ingham, J. Tipper, 2005 .

The ultrastructural organization of elastic fibers at the interface of the nucleus and annulus of the intervertebral disc.

J. Tipper, J. Tavakoli, A. Diwan, 2020, Acta biomaterialia.

Elastic Fibers in the Intervertebral Disc: From Form to Function and toward Regeneration

J. Tipper, J. Tavakoli, Mirit Sharabi, 2022, International journal of molecular sciences.

Ultrahigh molecular weight polyethylene/graphene oxide nanocomposites: Wear characterization and biological response to wear particles.

J. Tipper, R. Joffe, S. Suñer, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.

Neural cell responses to wear debris from metal-on-metal total disc replacements

J. Tipper, J. Phillips, R. M. Hall, 2019, European Spine Journal.

Biological Impact of Silicon Nitride for Orthopaedic Applications: Role of Particle Size, Surface Composition and Donor Variation

R. Hall, J. Tipper, S. Lal, 2018, Scientific Reports.

Validation of a novel particle isolation procedure using particle doped tissue samples

J. Tipper, S. Lal, S. Wilshaw, 2018, Data in brief.

A novel method for isolation and recovery of ceramic nanoparticles and metal wear debris from serum lubricants at ultra-low wear rates.

R. Hall, J. Tipper, S. Lal, 2016, Acta biomaterialia.

(iv) The science of metal-on-metal articulation

Z. Jin, J. Fisher, E. Ingham, 2005 .

A Biomimetic Nonwoven-Reinforced Hydrogel for Spinal Cord Injury Repair

R. Hall, J. Tipper, S. Russell, 2022, Polymers.

Developing a Tooth in situ Organ Culture Model for Dental and Periodontal Regeneration Research

E. Ingham, R. Hall, J. Tipper, 2021, Frontiers in Bioengineering and Biotechnology.

Effect of cup inclination angle during microseparation and rim loading on the wear of BIOLOX® delta ceramic-on-ceramic total hip replacement.

Mazen Al-Hajjar, John Fisher, Sophie Williams, 2010, Journal of biomedical materials research. Part B, Applied biomaterials.

Long-term wear of HIPed alumina on alumina bearings for THR under microseparation conditions

J Fisher, E Ingham, J. Fisher, 2001, Journal of materials science. Materials in medicine.

Advanced Strategies for the Regeneration of Lumbar Disc Annulus Fibrosus

J. Tipper, J. Tavakoli, A. Diwan, 2020, International journal of molecular sciences.

Severe wear and fracture of zirconia heads against alumina inserts in hip simulator studies with microseparation.

John Fisher, Eileen Ingham, Robert M Streicher, 2003, The Journal of arthroplasty.

Wear and biological activity of highly crosslinked polyethylene in the hip under low serum protein concentrations

J Fisher, E Ingham, M H Stone, 2007, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

A novel method for the prediction of functional biological activity of polyethylene wear debris

J. Fisher, M. Stone, E. Ingham, 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

In vitro analysis of the wear, wear debris and biological activity of surface-engineered coatings for use in metal-on-metal total hip replacements

J. Fisher, M. Stone, E. Ingham, 2003, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Investigation of wear and wear particles from a UHMWPE/ multi-walled carbon nanotube nanocomposite for total joint replacements

J. Tipper, S. Suñer, N. Emami, 2014 .

Survival and multiplication of Burkholderia cepacia within respiratory epithelial cells

J. Cove, E. Ingham, J. Tipper, 1998 .

Survival and Growth of Burkholderia cepacia Within the Free-Living Amoeba Acanthamoeba polyphaga

E. Ingham, J. Tipper, K. Kerr, 2000, European Journal of Clinical Microbiology and Infectious Diseases.

The biological response to nanometre-sized polymer particles

J. Fisher, E. Ingham, J. Tipper, 2015, Acta biomaterialia.

Influence of gelatin and bovine serum lubricants on ultra-high molecular weight polyethylene wear debris generated in in vitro simulations

B. Wroblewski, J. Fisher, M. Stone, 2000, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Detailed mechanical characterization of the transition zone: new insight into the integration between the annulus and nucleus of the intervertebral disc.

J. Tipper, J. Tavakoli, 2022, Acta biomaterialia.

PRESIDENTIAL GUEST LECTURE: Tribology of Alternative Bearings

Zhongmin Jin, John Fisher, Eileen Ingham, 2006, Clinical orthopaedics and related research.

Quantitative comparison of wear debris from UHMWPE that has and has not been sterilised by gamma irradiation.

J Fisher, E Ingham, B M Wroblewski, 1998, The Journal of bone and joint surgery. British volume.

REDUCED BIOLOGICAL RESPONSE TO WEAR PARTICLES FROM VITAMIN E ENHANCED UHMWPE

J. Fisher, J. Tipper, N. Tomita, 2011 .

Wear and biological effects of a semi-constrained total disc replacement subject to modified ISO standard test conditions.

J. Fisher, R. Hall, J. Tipper, 2015, Journal of the mechanical behavior of biomedical materials.

Quantitative analysis of wear and wear debris from metal-on-metal hip prostheses tested in a physiological hip joint simulator.

J Fisher, E Ingham, M H Stone, 2001, Bio-medical materials and engineering.

Characterisation of wear particles produced by metal on metal and ceramic on metal hip prostheses under standard and microseparation simulation

John Fisher, Eileen Ingham, Sophie Williams, 2007, Journal of materials science. Materials in medicine.

Analysis of wear, wear particles, and reduced inflammatory potential of vitamin E ultrahigh-molecular-weight polyethylene for use in total joint replacement

J. Fisher, E. Ingham, J. Tipper, 2013, Journal of biomedical materials research. Part B, Applied biomaterials.

Biological Impact of Silicon Nitride for Orthopaedic Applications: Role of Particle Size, Surface Composition and Donor Variation

R. Hall, J. Tipper, S. Lal, 2018, Scientific Reports.

Characterization of UHMWPE Wear Particles

J. Tipper, A. Stratton-Powell, 2009 .

Comparative wear and wear debris under three different counterface conditions of crosslinked and non-crosslinked ultra high molecular weight polyethylene.

J. Fisher, M. Stone, E. Ingham, 2001, Bio-medical materials and engineering.

The influence of phospholipid concentration in protein-containing lubricants on the wear of ultra-high molecular weight polyethylene in artificial hip joints

J. Fisher, M. Stone, E. Ingham, 2001, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

The Biologic Response to Polyetheretherketone (PEEK) Wear Particles in Total Joint Replacement: A Systematic Review

J. Tipper, C. Brockett, A. Stratton-Powell, 2016, Clinical orthopaedics and related research.

Comparison of the biological activity of grade GUR 1120 and GUR 415HP UHMWPE wear debris.

J. Fisher, M. Stone, E. Ingham, 2002, Bio-medical materials and engineering.

Biologic Responses to Polyetheretherketone (PEEK) Wear Particles

J. Tipper, C. Brockett, S. Lal, 2019, PEEK Biomaterials Handbook.

(v) Simulation and measurement of wear in metal-on-metal bearings in vitro- understanding the reasons for increased wear

Louise Jennings, John Fisher, Eileen Ingham, 2012, Orthopaedics and trauma.

Long Term Wear of Ceramic on Ceramic Hips

J. Fisher, T. Stewart, E. Ingham, 2004 .

Alumina-alumina artificial hip joints. Part II: characterisation of the wear debris from in vitro hip joint simulations.

J Fisher, E Ingham, J. Fisher, 2002, Biomaterials.

Wear of surface engineered metal-on-metal hip prostheses

J Fisher, E Ingham, M H Stone, 2004, Journal of materials science. Materials in medicine.

Quantitative characterization of polyethylene debris isolated from periprosthetic tissue in early failure knee implants and early and late failure Charnley hip implants.

J. Fisher, M. Stone, P. Barnett, 2001, Journal of biomedical materials research.

Application of principal component analysis and a fuzzy C-means clustering algorithm to wear debris morphology classification

Joanne L. Tipper, X. C. Zhou, Z. Jin, 2009 .

Numerical surface characterization of wear debris from artificial joints using atomic force microscopy

Xin-ping Yan, J. Tipper, Zhongmin Jin, 2009 .

The influence of lubricant on the morphology of ultra-high molecular weight polyethylene wear debris generated in laboratory tests

J. Fisher, M. Stone, E. Ingham, 1999, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Biological activity of polyethylene wear debris produced in the patellofemoral joint

J. Fisher, P. Ellison, J. Tipper, 2012, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

In vitro analysis of the cytotoxic and anti-inflammatory effects of antioxidant compounds used as additives in ultra high-molecular weight polyethylene in total joint replacement components

J. Fisher, J. Tipper, C. Bladen, 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

Generation of a large volume of clinically relevant nanometre-sized ultra-high-molecular-weight polyethylene wear particles for cell culture studies

J. Fisher, E. Ingham, J. Tipper, 2014, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Effect of femoral head size on the wear of metal on metal bearings in total hip replacements under adverse edge-loading conditions

J. Fisher, J. Tipper, L. Jennings, 2012, Journal of biomedical materials research. Part B, Applied biomaterials.

Wear of 36-mm BIOLOX® delta ceramic-on-ceramic bearing in total hip replacements under edge loading conditions

Mazen Al-Hajjar, John Fisher, Sophie Williams, 2013, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Magnetic resonance elastography: A non-invasive biomarker for low back pain studies

J. Tipper, J. Tavakoli, A. Diwan, 2021, Biomedical Engineering Advances.

Structure-function characterization of the transition zone in the intervertebral disc.

J. Tipper, J. Tavakoli, Mirit Sharabi, 2023, Acta biomaterialia.

Intervertebral disc-on-a-chip: a precision engineered toolbox for low back pain studies.

J. Tipper, A. Diwan, Javad Tavakoli, 2023, Trends in biotechnology.

An automated system for polymer wear debris analysis in total disc arthroplasty using convolution neural network

Steven W. Su, R. Hall, J. Tipper, 2023, Frontiers in Bioengineering and Biotechnology.

QUANTITATIVE COMPARISON OF UHMWPE WEAR PARTICLES FROM PRODISC-L TOTAL DISC REPLACEMENTS TESTED UNDER ISO AND ISO PLUS AP SHEAR

T. Brown, J. Fisher, E. Ingham, 2012 .

The effect of anterior–posterior shear load on the wear of ProDisc-L TDR

T. Brown, J. Fisher, E. Ingham, 2010, European Spine Journal.

Quantitative analysis of UHMWPE wear debris isolated from the periprosthetic femoral tissues from a series of Charnley total hip arthroplasties.

B. Wroblewski, J. Fisher, M. Stone, 2002, Bio-medical materials and engineering.

Investigation of three-dimensional surface topographies and mechanical properties of hypothesized biological active wear particles from artificial joints

Zhongxiao Peng, J. Tipper, Jingping Wu, 2013 .

Estimation of the Osteolytic Potential of Noncrosslinked and Crosslinked Polyethylenes and Ceramic-on-Ceramic Total Hip Prostheses

J. Fisher, E. Ingham, J. Tipper, 2006 .

Wear and Creep of Highly Crosslinked Polyethylene against Cobalt Chrome and Ceramic Femoral Heads

J Fisher, E Ingham, J. Fisher, 2008, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

The prediction of polyethylene wear rate and debris morphology produced by microscopic asperities on femoral heads

J. Fisher, M. Stone, E. Ingham, 2000, Journal of materials science. Materials in medicine.

(iv) Enhancing the safety and reliability of joint replacement implants

Claire L. Brockett, Mazen Al-Hajjar, John Fisher, 2012, Orthopaedics and trauma.

Hip Joints, Artificial

J. Fisher, M. Stone, E. Ingham, 2006 .

Cross-linked glenoid prosthesis: a wear comparison to conventional glenoid prosthesis with wear particulate analysis.

J. Tipper, L. Richards, Daren L. Deffenbaugh, 2009, Journal of shoulder and elbow surgery.

Advances in simulator testing of orthopaedic joint prostheses

John Fisher, Eileen Ingham, Joanne L. Tipper, 2003 .

Mixed material wear particle isolation from periprosthetic tissue surrounding total joint replacements

J. Tipper, A. Redmond, C. Brockett, 2022, Journal of biomedical materials research. Part B, Applied biomaterials.

Recovery of low volumes of wear debris from rat stifle joint tissues using a novel particle isolation method.

R. Hall, J. Tipper, B. von Rechenberg, 2018, Acta Biomaterialia.

A novel low wearing differential hardness, ceramic-on-metal hip joint prosthesis.

J Fisher, E Ingham, M H Stone, 2001, Journal of biomechanics.

Isolation and Characterisation of Wear Debris Surrounding Failed Total Ankle Replacements.

J. Tipper, C. Brockett, A. Stratton-Powell, 2023, Acta biomaterialia.

The Metal/Polyethylene Interface

B. Wroblewski, J. Fisher, M. Stone, 2000 .

Wear-simulation analysis of rotating-platform mobile-bearing knees.

J. Fisher, M. Stone, E. Ingham, 2006, Orthopedics.

PREDICTIONS OF THE BIOLOGICAL ACTIVITY OF POLYETHYLENE WEAR DEBRIS GENERATED UNDER DIFFERENT CONDITIONS IN VITRO

J. Fisher, J. Tipper, 2000 .

Quantitative comparison of wear debris from UHMWPE that has and has not been sterilised by gamma irradiation

B. Wroblewski, J. Fisher, M. Stone, 1998 .

Mechanical characterisation of porcine ankle cartilage

J. Fisher, J. Tipper, C. Brockett, 2016 .

Micromechanical characterisation of 3D bioprinted neural cell models using Brillouin microspectroscopy

H. Mahmodi, I. Kabakova, J. Tipper, 2021, Bioprinting.

Micromechanical Characterisation of 3D Bioprinted neural cell models using Brillouin Microscopy

H. Mahmodi, I. Kabakova, J. Tipper, 2021, bioRxiv.

Isolation and Characterisation of Wear Debris Surrounding Failed Total Ankle Replacements.

J. Tipper, C. Brockett, A. Stratton-Powell, 2023, Acta biomaterialia.

Comparison of Constant PID Controller and Adaptive PID Controller via Reinforcement Learning for a Rehabilitation Robot

J. Tipper, S. Su, Bradley R.G. Beck, 2022, 2022 Australian & New Zealand Control Conference (ANZCC).

Development and optimisation data of a tissue digestion method for the isolation of orthopaedic wear particles

J. Tipper, S. Lal, S. Wilshaw, 2018, Data in brief.

Recovery rate data for silicon nitride nanoparticle isolation using sodium polytungstate density gradients

J. Tipper, S. Lal, S. Wilshaw, 2018, Data in brief.

A novel method for isolation and recovery of ceramic nanoparticles and metal wear debris from serum lubricants at ultra-low wear rates.

J. Tipper, S. Lal, R. M. Hall, 2016, Acta biomaterialia.

A digitally driven manufacturing process for high resolution patterning of cell formations

R. Harris, S. Taccola, J. Tipper, 2023, Biomedical Microdevices.

Evaluation of a new methodology to simulate damage and wear of polyethylene hip replacements subjected to edge loading in hip simulator testing.

J. Fisher, J. Tipper, G. Isaac, 2018, Journal of biomedical materials research. Part B, Applied biomaterials.