C. Bragdon

发表

Metrology to Quantify Wear and Creep of Polyethylene Tibial Knee Inserts

W. Harris, O. Muratoglu, R. Perinchief, 2003, Clinical orthopaedics and related research.

In Vivo Skeletal Responses to Porous-Surfaced Implants Subjected to Small Induced Motions*

W. Harris, C. Bragdon, D. O'Connor, 1997, The Journal of bone and joint surgery. American volume.

W. Maloney, W. Harris, C. Bragdon, 1992, The Journal of bone and joint surgery. British volume.

Differences in stiffness of the interface between a cementless porous implant and cancellous bone in vivo in dogs due to varying amounts of implant motion.

W. Harris, C. Bragdon, D. O'Connor, 1996, The Journal of arthroplasty.

Ingrowth of bone in failed fixation of porous-coated femoral components.

W. Maloney, W. Harris, C. Bragdon, 1991, The Journal of bone and joint surgery. American volume.

Biomechanical and histologic investigation of cemented total hip arthroplasties. A study of autopsy-retrieved femurs after in vivo cycling.

W. Maloney, W. Harris, C. Bragdon, 1989, Clinical orthopaedics and related research.

Alterations in femoral and acetabular bone strains immediately following cementless total hip arthroplasty: An in vitro canine study

W. Harris, Keita Ito, C. Bragdon, 1991, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

The Otto Aufranc Award. Skeletal response to well fixed femoral components inserted with and without cement.

W J Maloney, W H Harris, M Jasty, 1996, Clinical orthopaedics and related research.

Determination of loading parameters in the canine hip in vivo.

W. Harris, C. Bragdon, T. Harrigan, 1993, Journal of biomechanics.

Knee-simulator testing of conventional and cross-linked polyethylene tibial inserts.

Murali Jasty, Orhun K Muratoglu, W. Harris, 2004, The Journal of arthroplasty.

Loci of movement of selected points on the femoral head during normal gait. Three-dimensional computer simulation.

W H Harris, B S Ramamurti, D M Estok, 1996, The Journal of arthroplasty.

Validation of a computer‐assisted method for measurement of radiographic wear in total hip arthroplasty using all polyethylene cemented acetabular components

C. Bragdon, C. Scemama, J. Martell, 2015, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Aggressive Wear Testing of a Cross-Linked Polyethylene in Total Knee Arthroplasty

W. Harris, O. Muratoglu, R. Perinchief, 2002, Clinical orthopaedics and related research.

Factors influencing stability at the interface between a porous surface and cancellous bone: a finite element analysis of a canine in vivo micromotion experiment.

W H Harris, B S Ramamurti, M Jasty, 1997, Journal of biomedical materials research.

Histology of porous-coated acetabular components. 25 cementless cups retrieved after arthroplasty.

J. Galante, D. R. Sumner, W. Harris, 1993, Acta orthopaedica Scandinavica.

Bone ingrowth into porous coated canine total hip replacements. Quantification by backscattered scanning electron microscopy and image analysis.

W. Harris, C. Bragdon, H. Rubash, 1989, Scanning microscopy.

Histological and radiographic assessment of well functioning porous-coated acetabular components. A human postmortem retrieval study.

M Jasty, Y Kukita, C. Engh, 1993, The Journal of bone and joint surgery. American volume.

In vitro comparison of frictional torque and torsional resistance of aged conventional gamma-in-nitrogen sterilized polyethylene versus aged highly crosslinked polyethylene articulating against head sizes larger than 32 mm

W. Harris, O. Muratoglu, C. Bragdon, 2006, Acta orthopaedica.

Importance of a Thin Cement Mantle: Autopsy Studies of Eight Hips

W. Maloney, W. Harris, C. Bragdon, 1998, Clinical orthopaedics and related research.

Effect of oral alendronate on net bone ingrowth into canine cementless total hips.

W. Harris, H. Rubash, C. Bragdon, 2005, The Journal of arthroplasty.

Bone ingrowth into a low-modulus composite plastic porous-coated canine femoral component.

R. Crowninshield, W. Maloney, W. Harris, 1992, The Journal of arthroplasty.

Histomorphological studies of the long-term skeletal responses to well fixed cemented femoral components.

W J Maloney, W H Harris, M Jasty, 1990, The Journal of bone and joint surgery. American volume.

Larger diameter femoral heads used in conjunction with a highly cross-linked ultra-high molecular weight polyethylene: a new concept.

W. Harris, O. Muratoglu, R. Perinchief, 2001, The Journal of arthroplasty.

Wear of Polyethylene Acetabular Components in Total Hip Arthroplasty. An Analysis of One Hundred and Twenty-eight Components Retrieved at Autopsy or Revision Operations*

W H Harris, M Jasty, W. Harris, 1997, The Journal of bone and joint surgery. American volume.

Influence of intraoperative femoral fractures and cerclage wiring on bone ingrowth into canine porous-coated femoral components.

W H Harris, M Jasty, W. Harris, 1995, The Journal of arthroplasty.

The initiation of failure in cemented femoral components of hip arthroplasties.

W J Maloney, W H Harris, M Jasty, 1991, The Journal of bone and joint surgery. British volume.

A novel method of cross-linking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties. Recipient of the 1999 HAP Paul Award.

W H Harris, M Jasty, W. Harris, 2001, The Journal of arthroplasty.

Porous-coated uncemented components in experimental total hip arthroplasty in dogs. Effect of plasma-sprayed calcium phosphate coatings on bone ingrowth.

W. Harris, G. Paiement, C. Bragdon, 1992, Clinical orthopaedics and related research.

Characterization of solid products of corrosion generated by modular-head femoral stems of different designs and materials

J. Galante, C. Bragdon, J. Jacobs, 1997 .

Unified wear model for highly crosslinked ultra-high molecular weight polyethylenes (UHMWPE).

W. Harris, O. Muratoglu, C. Bragdon, 1999, Biomaterials.

A new pin-on-disk wear testing method for simulating wear of polyethylene on cobalt-chrome alloy in total hip arthroplasty.

W. Harris, C. Bragdon, J. Lowenstein, 2001, The Journal of arthroplasty.

Effect of Radiation, Heat, and Aging on In Vitro Wear Resistance of Polyethylene

W. Harris, O. Muratoglu, C. Bragdon, 2003, Clinical orthopaedics and related research.

Gradient crosslinking of UHMWPE using irradiation in molten state for total joint arthroplasty.

Murali Jasty, Orhun K Muratoglu, Premnath Venugopalan, 2002, Biomaterials.

Long-duration metal-on-metal total hip arthroplasties with low wear of the articulating surfaces.

W. Harris, C. Bragdon, T. Schmalzried, 1996, The Journal of arthroplasty.

The mechanism of loosening of cemented acetabular components in total hip arthroplasty. Analysis of specimens retrieved at autopsy.

A. Malcolm, W. Harris, C. Bragdon, 1992, Clinical orthopaedics and related research.

Comparison of bone ingrowth into cobalt chrome sphere and titanium fiber mesh porous coated cementless canine acetabular components.

W. Harris, C. Bragdon, M. Jasty, 1993, Journal of biomedical materials research.

Effect of consolidation on adhesive and abrasive wear of ultra high molecular weight polyethylene.

W. Harris, O. Muratoglu, C. Bragdon, 2003, Biomaterials.

Wear of retrieved cemented polyethylene acetabula with alumina femoral heads.

W. Harris, C. Bragdon, B. McGrory, 1997, The Journal of arthroplasty.

Osteochondral defect repair using a polyvinyl alcohol-polyacrylic acid (PVA-PAAc) hydrogel

O. Muratoglu, C. Bragdon, D. Bichara, 2014, Biomedical materials.

The Importance of Multidirectional Motion on the Wear of Polyethylene

C. Bragdon, W. Syniuta, J. Lowenstein, 1996, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

Challenge to the concept that UHMWPE acetabular components oxidize in vivo.

W. Harris, C. Bragdon, E. Merrill, 1993, Biomaterials.

Unrecognized femoral fractures during cementless total hip arthroplasty in the dog and their effect on bone ingrowth.

W. Harris, C. Bragdon, H. Rubash, 1992, The Journal of arthroplasty.

Etiology of Osteolysis Around Porous‐Coated Cementless Total Hip Arthroplasties

W. Maloney, W. Harris, C. Bragdon, 1994, Clinical orthopaedics and related research.

Thigh pain despite bone ingrowth into uncemented femoral stems.

R. Barrack, W. Harris, C. Bragdon, 1992, The Journal of bone and joint surgery. British volume.

Simulated normal gait wear testing of a highly cross-linked polyethylene tibial insert.

W. Harris, H. Rubash, O. Muratoglu, 2007, The Journal of arthroplasty.

Enhanced stability of uncemented canine femoral components by bone ingrowth into the porous coatings.

W H Harris, M Jasty, W. Harris, 1997, The Journal of arthroplasty.

Surface damage to cobalt-chrome femoral head prostheses.

W H Harris, M Jasty, W. Harris, 1994, The Journal of bone and joint surgery. British volume.

Third-body wear testing of a highly cross-linked acetabular liner: the effect of large femoral head size in the presence of particulate poly(methyl-methacrylate) debris.

W. Harris, O. Muratoglu, C. Bragdon, 2005, The Journal of arthroplasty.

Knee Simulator Wear of Polyethylene Tibias Articulating against Explanted Rough Femoral Components

W. Harris, O. Muratoglu, C. Bragdon, 2004, Clinical orthopaedics and related research.

Surface analysis of early retrieved acetabular polyethylene liners: a comparison of conventional and highly crosslinked polyethylenes.

W. Harris, A. Freiberg, O. Muratoglu, 2004, The Journal of arthroplasty.

Third-body wear of highly cross-linked polyethylene in a hip simulator.

Murali Jasty, Orhun K Muratoglu, W. Harris, 2003, The Journal of arthroplasty.

Evaluation of Three-Dimensional Bioprinted Human Cartilage Powder Combined with Micronized Subcutaneous Adipose Tissues for the Repair of Osteochondral Defects in Beagle Dogs

M. Brittberg, C. Bragdon, Jina Ryu, 2022, International journal of molecular sciences.

Tissue response to particulate polymethylmethacrylate in mice with various immune deficiencies.

C. Bragdon, H. Wolfe, M. Goldberg, 1995, The Journal of bone and joint surgery. American volume.

Reduced bone stress as predicted by composite beam theory correlates with cortical bone loss following cemented total hip arthroplasty

Matthew J. Silva, W. Maloney, D. Robertson, 1999, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

Factors influencing stability at the interface between a porous surface and cancellous bone: a finite element analysis of a canine in vivo micromotion experiment.

C. Bragdon, J. Lowenstein, M. Jasty, 1997, Journal of biomedical materials research.

Validation of a computer‐assisted method for measurement of radiographic wear in total hip arthroplasty using all polyethylene cemented acetabular components

C. Bragdon, C. Scemama, J. Martell, 2015, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.