K. Tankala

发表

Current developments in high-power monolithic polarization maintaining fiber amplifiers for coherent beam combining applications

K. Tankala, D. P. Machewirth, Q. Wang, 2007, SPIE LASE.

Robustly Single-mode Polarization Maintaining Er/Yb co-doped LMA Fiber for High Power Applications

Y. Chen, A. Galvanauskas, W. Torruellas, 2007, 2007 Conference on Lasers and Electro-Optics (CLEO).

Optical Fibers for Industrial Laser Applications

B. Samson, K. Tankala, A. Carter, 2007 .

306W all-fiber based linearly polarized single-mode Ytterbium fiber laser

C. Liu, D. Machewirth, B. Samson, 2005 .

All-fiber based linearly polarized single-mode ytterbium fiber laser with > 300 W output

C. Liu, D. Machewirth, B. Samson, 2005, OFC/NFOEC Technical Digest. Optical Fiber Communication Conference, 2005..

810 W continuous-wave and single-transverse-mode fibre laser using 20 μm core Yb-doped double-clad fibre

Almantas Galvanauskas, Stefan Heinemann, Bodo Ehlers, 2004 .

180-W single transverse mode Yb-doped fiber laser

K. Tankala, A. Galvanauskas, S. Heinemann, 2004 .

810-W single transverse mode Yb-doped fiber laser

Almantas Galvanauskas, Stefan Heinemann, Bodo Ehlers, 2004 .

Optical emissions during plasma assisted chemical vapor deposition of diamond-like carbon films

T. DebRoy, K. Tankala, Satyendra Kumar, 1994 .

Effectively Single-Mode Chirally-Coupled Core Fiber

Almantas Galvanauskas, Kanishka Tankala, Guoqing Chang, 2007 .

Oxidation of diamond films synthesized by hot filament assisted chemical vapor deposition

T. DebRoy, K. Tankala, M. Alam, 1990 .

Front Matter: Volume 7195

D. Gapontsev, K. Tankala, D. Kliner, 2009 .

Efficient and reliable 790nm-pumped Tm lasers from 1.91 to 2.13μm

K. Tankala, G. Frith, B. Samson, 2021 .

High Efficiency 20W Single Frequency PM Fiber Amplifier at 2037nm

Joshua E. Rothenberg, Victor Khitrov, Lewis D. Book, 2009 .

Fiber Lasers VII: Technology, Systems, and Applications

K. Tankala, J. Dawson, 2016 .

Optical fibre for fabricating long-period gratings with low temperature sensitivity within selected temperature range

V. Grubsky, K. Tankala, A. Carter, 2005 .

Kinetics of directed oxidation of Al-Mg alloys in the initial and final stages of synthesis of Al2O3/Al composites

T. DebRoy, K. Tankala, H. Venugopalan, 1996 .

Probing the initial stage of synthesis of Al2O3/Al composites by directed oxidation of Al-Mg alloys

T. DebRoy, K. Tankala, H. Venugopalan, 1996 .

Electrical conductivity of alumina/aluminum composites synthesized by directed metal oxidation

T. DebRoy, K. Tankala, H. Venugopalan, 1994 .

Modeling of the role of atomic hydrogen in heat transfer during hot filament assisted deposition of diamond

T. DebRoy, K. Tankala, 1992 .

Hydrogen assisted heat transfer during diamond growth using carbon and tantalum filaments

T. DebRoy, K. Tankala, W. Yarbrough, 1992 .

Role of heat transfer and fluid flow in the chemical vapor deposition of diamond

T. DebRoy, K. Tankala, R. Messier, 1990 .

Highly efficient 70W all-fibre Tm-doped laser system operating at 1908nm

J. Farroni, K. Tankala, B. Samson, 2008, OECC/ACOFT 2008 - Joint Conference of the Opto-Electronics and Communications Conference and the Australian Conference on Optical Fibre Technology.

Transport phenomena in the scale-up of hot filament-assisted chemical vapor deposition of diamond

T. DebRoy, K. Tankala, 1993 .

A monolithic thulium doped single mode fiber laser with 1.5ns pulsewidth and 8kW peak power

Jianwu Ding, Adrian Carter, Kanishka Tankala, 2011, LASE.

Mitigation of photodegradation in 790nm-pumped Tm-doped fibers

K. Tankala, B. Samson, G. Frith, 2010, LASE.

High-power single-polarization and single-transverse-mode fiber laser with an all-fiber cavity and fiber-grating stabilized spectrum.

Victor Khitrov, Almantas Galvanauskas, Stefan Heinemann, 2006, Optics letters.

kW level narrow linewidth Yb fiber amplifiers for beam combining

Victor Khitrov, Kanishka Tankala, Kevin Farley, 2010, Defense + Commercial Sensing.

Reliability of low-index polymer coated double-clad fibers used in fiber lasers and amplifiers

Jaroslaw Abramczyk, Douglas Guertin, Kanishka Tankala, 2011 .

PM double-clad fibers for high-power lasers and amplifiers

Jaroslaw Abramczyk, Upendra H. Manyam, J. Farroni, 2003, SPIE LASE.

Some hygrothermal effects on the mechanical behaviour and fractography of glass-epoxy composites with modified interface

Kishore, K. Tankala, R. Rao, 1991 .

Bend loss in reduced cladding optical fibers

D. Machewirth, K. Tankala, A. Carter, 2003, OFC 2003 Optical Fiber Communications Conference, 2003..

Mechanical reliability of double clad fibers in typical fiber laser deployment conditions

Jaroslaw Abramczyk, Kanishka Tankala, Nick Jacobson, 2016, LASE.

Modeling of substrate surface temperature distribution during hot-filament assisted diamond deposition

T. DebRoy, K. Tankala, W. Yarbrough, 1992 .

Chirally Coupled Core Fibers at 1550-nm and 1064-nm for Effectively Single-Mode Core Size Scaling

A. Galvanauskas, K. Tankala, N. Jacobsen, 2007, 2007 Conference on Lasers and Electro-Optics (CLEO).