S. Pal

发表

Repeatability study of an electrothermally actuated micromirror

Huikai Xie, S. Pal, 2009, 2009 IEEE International Reliability Physics Symposium.

An Electrothermal Tip–Tilt–Piston Micromirror Based on Folded Dual S-Shaped Bimorphs

Huikai Xie, K. Jia, S. Pal, 2009, Journal of Microelectromechanical Systems.

Recent trends in two-photon auto-fluorescence lifetime imaging (2P-FLIM) and its biomedical applications

S. Pal, N. Mazumder, Harsh Ranawat, 2019, Biomedical Engineering Letters.

Significance of surface modification on nucleate pool boiling heat transfer characteristics of refrigerant R-141b

Mantu Kumar Das, S. Pal, R. Das, 2021 .

Influence of horizontal enhanced tube on flow boiling heat transfer characteristics of environmentally friendly refrigerant R-407c

S. Pal, A. Das, Sandipan Deb, 2022, Materials Today: Proceedings.

An Electrothermal Micromirror with High Linear Scanning Efficiency

Huikai Xie, Kemiao Jia, K. Jia, 2007, LEOS 2007 - IEEE Lasers and Electro-Optics Society Annual Meeting Conference Proceedings.

Laminar fluid flow and heat transfer through a circular tube having spiral ribs and twisted tapes

S. Pal, S. Saha, 2015 .

MEMS mirrors based on a curved concentric electrothermal actuator

Huikai Xie, Sagnik Pal, Huikai Xie, 2012 .

MEMS mirrors based on curved concentric electrothermal actuators with very small lateral shift and tilt

Huikai Xie, Sagnik Pal, Huikai Xie, 2011, 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference.

Maximization of constant velocity scan range of electrothermally-actuated micromirror by pulse width modulated drive

Huikai Xie, S. Pal, 2009, 2009 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics.

Experimental investigation of laminar flow of viscous oil through a circular tube having integral axial corrugation roughness and fitted with twisted tapes with oblique teeth

S. Pal, S. Saha, 2015 .

Laminar flow and heat transfer through a circular tube having integral transverse corrugations and fitted with centre-cleared twisted-tape

S. Pal, S. Saha, 2014 .

Intra-vessel heterogeneity establishes enhanced sites of macromolecular leakage downstream of laminin α5.

S. Pal, L. Venkatraman, M. Richards, 2021, Cell reports.

Surface wettability change on TF nanocoated surfaces during pool boiling heat transfer of refrigerant R-141b

S. Pal, R. Das, A. Das, 2020, Heat and Mass Transfer.

Analysis and Fabrication of Curved Multimorph Transducers That Undergo Bending and Twisting

Huikai Xie, S. Pal, 2012, Journal of Microelectromechanical Systems.

A Comprehensive Assessment of Two-Phase Flow Boiling Heat Transfer in Micro-Fin Tubes Using Pure and Blended Eco-Friendly Refrigerants

S. Pal, B. Saha, A. Das, 2023, Energies.

A curved multimorph based electrothermal micromirror with large scan range and low drive voltage

Huikai Xie, Sagnik Pal, Huikai Xie, 2011 .

Analysis, simulation and fabrication of curved multimorphs that undergo bending and twisting

Huikai Xie, S. Pal, 2011, 2011 IEEE SENSORS Proceedings.

Modeling and reliability of electrothermal micromirrors

Sagnik Pal, S. Pal, 2011 .

Flow boiling heat transfer characteristics over horizontal smooth and microfin tubes: An empirical investigation utilizing R407c

S. Pal, R. Das, A. Das, 2023, International Journal of Thermal Sciences.

Performance analysis of porous-based taper-shaped fin for enhanced heat transfer rate using cuckoo search algorithm

M. Deb, S. Pal, R. Das, 2023, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Quantification of thermal energy generation in annular hyperbolic porous-finned heat sinks using inverse optimization

S. Pal, R. Das, 2021, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering.

Numerical and Optimization-Based Study on Split Hemispherical Shaped Fins for Augmenting Heat Transfer Rate

Debabrata Barik, M. Deb, S. Pal, 2023, International Journal of Energy Research.

Heat Transfer and Performance Enhancement of Porous Split Elliptical Fins

Debabrata Barik, M. Deb, S. Pal, 2023, International Journal of Energy Research.

Parametric Evaluation of the Flow Boiling Heat Transfer Properties of R22 and R407c inside Horizontal Microfin Tube

Debabrata Barik, S. Pal, A. Das, 2023, International Journal of Energy Research.

Evaluation of flow boiling heat transfer in horizontal circular trapezoidal-shaped microfin tube

S. Pal, R. Das, A. Das, 2023, Heat and Mass Transfer.

Use of Cuckoo Search Algorithm for Performance Evaluation of Split Elliptic Shaped Fins for Enhanced Rate of Heat Transfer

Alok Ranjan, Ranjan Das, Arindam Majumder, 2021 .

Dental optical coherence tomography employing miniaturized MEMS-based imaging probe

Huikai Xie, K. Jia, S. Pal, 2009, 2009 IEEE/LEOS International Conference on Optical MEMS and Nanophotonics.

LVD micromirror for rapid reference scanning in optical coherence tomography

Huikai Xie, Lei Xiao, Toshikazu Nishida, 2007, SPIE MOEMS-MEMS.

Reduced order thermal modeling of a one-dimensional electrothermally actuated micromirror device

Huikai Xie, Sagnik Pal, Kemiao Jia, 2008, SPIE MOEMS-MEMS.