Byoung-Sun Lee

发表

Silicon/Carbon Nanotube/BaTiO₃ Nanocomposite Anode: Evidence for Enhanced Lithium-Ion Mobility Induced by the Local Piezoelectric Potential.

Byoung-Sun Lee, Jihyun Yoon, C. Jung, 2016, ACS nano.

Highly Stretchable Resistive Pressure Sensors Using a Conductive Elastomeric Composite on a Micropyramid Array

U. Chung, Mun-Bo Shim, S. Jeon, 2014, Advanced materials.

Recent Progress in Coaxial Electrospinning: New Parameters, Various Structures, and Wide Applications

Byoung-Sun Lee, Jihyun Yoon, Woong‐Ryeol Yu, 2018, Advanced materials.

New Electrospinning Nozzle to Reduce Jet Instability and Its Application to Manufacture of Multi-layered Nanofibers

Byoung-Sun Lee, Seung‐Yeol Jeon, Woong‐Ryeol Yu, 2014, Scientific Reports.

Dendrite Suppression Membranes for Rechargeable Zinc Batteries.

Ping Liu, Byoung-Sun Lee, Renkun Chen, 2018, ACS applied materials & interfaces.

Flutter-driven triboelectrification for harvesting wind energy

Zhong Lin Wang, U. Chung, Byoung-Sun Lee, 2014, Nature Communications.

Effect of propagation distance on acoustic emission of carbon fiber/epoxy composites

Byoung-Sun Lee, Woong‐Ryeol Yu, D. Jung, 2021, Structural Health Monitoring.

Effects of substrate on piezoelectricity of electrospun poly(vinylidene fluoride)-nanofiber-based energy generators.

U-In Chung, Boongik Park, Woong-Ryeol Yu, 2014, ACS applied materials & interfaces.

Electrochemical properties of PVP-derived carbon nanospheres with various porosity and heteroatom contents in anode voltage range over full-cell operation

Byoung-Sun Lee, Jihyun Yoon, Woong‐Ryeol Yu, 2021, Journal of Industrial and Engineering Chemistry.

A facile route to mechanically robust graphene oxide fibers

Byoung-Sun Lee, Woong‐Ryeol Yu, Y. Kwon, 2019, RSC advances.

SnO2 nanotubes fabricated using electrospinning and atomic layer deposition and their gas sensing performance

Seong‐Hyeon Hong, Byoung-Sun Lee, Woong‐Ryeol Yu, 2010, Nanotechnology.

Analysis of Rate-Limiting Factors in Thick Electrodes for Electric Vehicle Applications

Ping Liu, Byoung-Sun Lee, Zhaohui Wu, 2018 .

Poling-free spinning process of manufacturing piezoelectric yarns for textile applications

Byoung-Sun Lee, Woong‐Ryeol Yu, Jihyun Bae, 2019, Materials & Design.

Effect of pores in hollow carbon nanofibers on their negative electrode properties for a lithium rechargeable battery.

Sehee Lee, K. Oh, Byoung-Sun Lee, 2012, ACS applied materials & interfaces.

Fabrication of double-tubular carbon nanofibers using quadruple coaxial electrospinning

Byoung-Sun Lee, Woong‐Ryeol Yu, Ho-Sung Yang, 2014, Nanotechnology.

MANUFACTURE OF CNT REINFORCED POLYMER COMPOSITES USING NANOFIBERS CONTAINING CNT

Byoung-Sun Lee, Woong‐Ryeol Yu, 2007 .

Electrochemical wet-spinning process for fabricating strong PAN fibers via an in situ induced plasticizing effect

Byoung-Sun Lee, Woong‐Ryeol Yu, Ho-Sung Yang, 2020 .

Layered Oxide Cathode-Inspired Secondary Hard Carbon Microsphere Anode Material for High-Power and Long-Life Rechargeable Batteries

Byeong Jin Yeang, Byoung-Sun Lee, H. Kim, 2022, SSRN Electronic Journal.

Solid Electrolyte Layers by Solution Deposition

Byoung-Sun Lee, Haodong Liu, Hee‐Dae Lim, 2018 .

Designing Materials and Processes for Strong Polyacrylonitrile Precursor Fibers

Byoung-Sun Lee, Hyunchul Ahn, S. Yeo, 2021, Polymers.

A Review of Recent Advancements in Electrospun Anode Materials to Improve Rechargeable Lithium Battery Performance

Byoung-Sun Lee, 2020, Polymers.

Fabrication of Si core/C shell nanofibers and their electrochemical performances as a lithium-ion battery anode

Sehee Lee, K. Oh, Byoung-Sun Lee, 2012 .

Rational design of a Si–Sn–C ternary anode having exceptional rate performance

Byoung-Sun Lee, Woong‐Ryeol Yu, Ho-Sung Yang, 2019, Energy Storage Materials.

Facile conductive bridges formed between silicon nanoparticles inside hollow carbon nanofibers.

Sehee Lee, K. Oh, Byoung-Sun Lee, 2013, Nanoscale.

A scalable, ecofriendly, and cost-effective lithium metal protection layer from a Post-it note

Byoung-Sun Lee, Woong‐Ryeol Yu, J. Youk, 2021, RSC advances.

Face-centered-cubic lithium crystals formed in mesopores of carbon nanofiber electrodes.

Sehee Lee, K. Oh, Byoung-Sun Lee, 2013, ACS nano.

Anodic properties of hollow carbon nanofibers for Li-ion battery

Sehee Lee, K. Oh, Byoung-Sun Lee, 2012 .

Fabrication of carbon nanofibers with Si nanoparticle-stuffed cylindrical multi-channels via coaxial electrospinning and their anodic performance

Byoung-Sun Lee, Woong‐Ryeol Yu, Ho-Sung Yang, 2014 .

Novel multi-layered 1-D nanostructure exhibiting the theoretical capacity of silicon for a super-enhanced lithium-ion battery.

U. Chung, Byoung-Sun Lee, C. Jung, 2014, Nanoscale.

Moisturized Polyacrylonitrile Copolymer for Stronger Precursor Fibers

Byoung-Sun Lee, Woong‐Ryeol Yu, Hyunchul Ahn, 2021, ACS Applied Polymer Materials.

PA6/MWNT nanocomposites fabricated using electrospun nanofibers containing MWNT

Byoung-Sun Lee, Woong‐Ryeol Yu, 2010 .

Pilot Scale Hybrid Organic/Inorganic Coatings on a Polyolefin Separator to Enhance Dimensional Stability for Thermally Stable Long-Life Rechargeable Batteries

Byoung-Sun Lee, Hyoungwoo Choi, 2022, Polymers.

Electrospun carbon nanofibers as a functional composite platform: a review of highly tunable microstructures and morphologies for versatile applications

Byoung-Sun Lee, Woong‐Ryeol Yu, 2020, Functional Composites and Structures.

Robust yarn electrodes for microbatteries with high areal capacity

Byoung-Sun Lee, Woong‐Ryeol Yu, I. Choi, 2019, Materials & Design.

Moisture condensation behavior of hierarchically carbon nanotube-grafted carbon nanofibers.

Byoung-Sun Lee, J. Youk, Jinyong Lee, 2013, ACS applied materials & interfaces.

SnO2@TiO2 double-shell nanotubes for a lithium ion battery anode with excellent high rate cyclability.

Seong‐Hyeon Hong, Byoung-Sun Lee, Woong‐Ryeol Yu, 2013, Nanoscale.

Ethanol sensors based on ZnO nanotubes with controllable wall thickness via atomic layer deposition, an O2 plasma process and an annealing process

Seong‐Hyeon Hong, Byoung-Sun Lee, Woong‐Ryeol Yu, 2012 .

Fabrication of SnO2 nanotube microyarn and its gas sensing behavior

Seong‐Hyeon Hong, Byoung-Sun Lee, Woong‐Ryeol Yu, 2011 .

Suppressing Lithium Dendrite Growth with a Single-Component Coating.

Ping Liu, Byoung-Sun Lee, Matthew S. Gonzalez, 2017, ACS applied materials & interfaces.

Directly drawn poly(3-hexylthiophene) field-effect transistors by electrohydrodynamic jet printing: improving performance with surface modification.

Hyungdong Lee, D. Byun, Byoung-Sun Lee, 2014, ACS applied materials & interfaces.

An effective method for manufacturing hollow carbon nanofibers and microstructural analysis

Byoung-Sun Lee, Woong‐Ryeol Yu, J. Youk, 2012, Macromolecular Research.

Recent Progress in Coaxial Electrospinning: New Parameters, Various Structures, and Wide Applications

Byoung-Sun Lee, Jihyun Yoon, Woong‐Ryeol Yu, 2018, Advanced materials.

Simple design of a Si–Sn–C ternary composite anode for Li-ion batteries

Byoung-Sun Lee, Woong‐Ryeol Yu, Ho-Sung Yang, 2021, Journal of Industrial and Engineering Chemistry.

Dendrite Suppression Membranes for Rechargeable Zinc Batteries.

Ping Liu, Byoung-Sun Lee, Renkun Chen, 2018, ACS applied materials & interfaces.

The synergistic effect of inert oxide and metal fluoride dual coatings on advanced cathode materials for lithium ion battery applications.

Byoung-Sun Lee, Jun-Ho Park, Kwangjin Park, 2016, Physical chemistry chemical physics : PCCP.

Facile method to improve initial reversible capacity of hollow carbon nanofiber anodes

Byoung-Sun Lee, Heechul Jung, Woong‐Ryeol Yu, 2015 .