Zone-Ching Lin

发表

Abrasive removal depth for polishing a sapphire wafer by a cross-patterned polishing pad with different abrasive particle sizes

Zone-Ching Lin, Ren-Yuan Wang, 2014 .

A knowledge acquisition model for selecting coordinate measuring machines using inductive learning

Zone-Ching Lin, Q. Liu, 2000 .

A study of the estimation method of the cutting force for a conical tool under nanoscale depth of cut by molecular dynamics.

Zone-Ching Lin, Jen-Ching Huang, 2008, Nanotechnology.

The fixture planning of modular fixtures for measurement

Zone-Ching Lin, Jen-Ching Huang, 2000 .

The Application of Grey Theory to the Prediction of Measurement Points for Circularity Geometric Tolerance

Zone-Ching Lin, W. Lin, 2001 .

The study of measuring points on a plane curve by the method of gradually adding training case and concept of pattern assembly with fuzzy point

Zone-Ching Lin, C. Deng, 2001 .

Measurement point prediction of flatness geometric tolerance by using grey theory

Zone-Ching Lin, Wenbin Lin, 2001 .

A neural network-based algorithm that searches for the measuring points of a rule surface

Zone-Ching Lin, Q. Liu, 2000 .

Optimising the number and position of the measuring points on a plane curve using an algorithm for comparing the angle between the normal directions

Zone-Ching Lin, C. Deng, 1996 .

Three-dimensional cutting process analysis with different cutting velocities

Zone-Ching Lin, Zone-Ching Lin, Yuung-Der Yarng, 1997 .

A study of deformation of the machined workpiece and tool under different low cutting velocities with an elastic cutting tool

Zone-Ching Lin, Ship-Peng Lo, Ship-Peng Lo, 1998 .

Distribution of polishing times for a wafer with different patterned polishing pads during CMP and CCMP

Zone-Ching Lin, Chein-Chung Chen, 2010 .

A study of the stress, strain and temperature distributions of a machined workpiece using a thermo-elastic-plastic coupled model

Zone-Ching Lin, Zone-Ching Lin, W. Pan, 1994 .

The influence of different cutting speeds on the cutting force and strain–stress behaviors of single crystal copper during nano-scale orthogonal cutting

Zone-Ching Lin, Jen-Ching Huang, Zone-Ching Lin, 2008 .

A nano-orthogonal cutting model based on a modified molecular dynamics technique

Zone-Ching Lin, Jen-Ching Huang, 2004 .

Construction and Analysis of Nanoscale Simulative Measuring Model for Scanning Near-Field Optical Microscope

Zone-Ching Lin, Ming-Ho Chou, 2010 .

Temperature field analysis of IC molding process based on three dimensional finite element model

Zone-Ching Lin, Chang-Cheng Chen, 2004 .

Analysis of simulated scanning of atomic-scale silicon surface by atomic force microscopy.

Zone-Ching Lin, Shih-Che Liu, 2008, Scanning.

Application of a neural network machine learning model in the selection system of sheet metal bending tooling

Zone-Ching Lin, Da-Yuan Chang, Zone-Ching Lin, 1996, Artif. Intell. Eng..

Analysis and Application of Grey Relation and ANOVA in Chemical–Mechanical Polishing Process Parameters

Zone-Ching Lin, C.-Y. Ho, C.-Y. Ho, 2003 .

A study of material removal amount of sapphire wafer in application of chemical mechanical polishing with different polishing pads

Zone-Ching Lin, Wei Huang, Ju-Shiau Tsai, 2012 .

An investigation of expert systems for die design

Zone-Ching Lin, Ho Chang, Zone-Ching Lin, 1994, J. Intell. Manuf..

An investigation of a coupled analysis of a thermo-elastic-plastic model during warm upsetting

Zone-Ching Lin, S. Lin, Zone-Ching Lin, 1990 .

A study of estimating cutting depth for multi-pass nanoscale cutting by using atomic force microscopy

Zone-Ching Lin, Ying-Chih Hsu, Zone-Ching Lin, 2012 .

Quasi-steady Molecular Statics Model for Simulation of Nanoscale Cutting with Different Diamond Cutters

Zone-Ching Lin, Jia Ye, 2009 .

Effect of thermal load and mechanical load on the residual stress of a machined workpiece

Zone-Ching Lin, Zone-Ching Lin, Yau-Yi Lin, 1991 .

Establishing a theoretical model for abrasive removal depth of silicon wafer chemical mechanical polishing by integrating a polishing times analytical model and specific down force energy theory

Zone-Ching Lin, Ren-Yuan Wang, Zih-Wun Jhang, 2018 .

Simulation of temperature field during nanoscale orthogonal cutting of single-crystal silicon by molecular statics method

Zone-Ching Lin, Ying-Chih Hsu, Meng-Hua Lin, 2014 .

Tool wear investigation on the precision progressive die for the IC dam-bar cutting process

Zone-Ching Lin, Dar-Yuan Chang, Zone-Ching Lin, 2003 .

Hot rolling of an aluminum–copper sandwich flat strip with the three-dimensional finite element method

Zone-Ching Lin, Zone-Ching Lin, Tang-Guo Huang, 2000 .

An Investigation of Stresses Induced by Temperature Variation in Integrated Circuit Molding Process

Zone-Ching Lin, Chang-Cheng Chen, 2007 .

A calculating method for the fewest cutting passes on sapphire substrate at a certain depth using specific down force energy with an AFM probe

Zone-Ching Lin, Ying-Chih Hsu, 2012 .

Inverse model of fiber probe aperture size using a non-destructive method.

Zone-Ching Lin, Ching-Been Yang, 2009, Scanning.

Analysis of point fabrication model for near-field photolithography with experimental study.

Zone-Ching Lin, Ching-Been Yang, 2006, Scanning.

The near-field power density distribution characteristics for different types of optical fiber probes

Zone-Ching Lin, Ching-Been Yang, 2005 .

The building of spindle thermal displacement model of high speed machine center

Zone-Ching Lin, Jia-Shing Chang, Zone-Ching Lin, 2007 .

Different degree of reduction and sliding phenomenon study for three-dimensional hot rolling with sandwich flat strip

Zone-Ching Lin, Zone-Ching Lin, Tang-Guo Huang, 2000 .

Application of an Elastic Roller with Slightly Convex Shape to the Improvement of the Flatness of a Strip for Cold Rolling.

Zone-Ching Lin, Shyue-Yuan Lee, Zone-Ching Lin, 1997 .

The effect of a slightly concave-shaped roller on strip shape during rolling

Zone-Ching Lin, Shyue-Yuan Lee, Zone-Ching Lin, 1997 .

Rolling process analysis of aluminum strip by a coupled thermo-elastic-plastic model

Zone-Ching Lin, Wen-Shy Yang, Zone-Ching Lin, 1995 .

Rolling Speed and Strain Energy Density of Asymmetrical Rolling of Aluminum Strip

Zone-Ching Lin, Yung-Neng Cheng, Zone-Ching Lin, 1994 .

A thermoelastic-plastic large deformation model for orthogonal cutting with tool flank wear—Part I: Computational procedures

Zone-Ching Lin, Zone-Ching Lin, W. Pan, 1993 .

The influence of the degree of constraint on the residual stress of the machined workpiece

Zone-Ching Lin, Y. Y. Lin, Chun Liu, 1993 .

Creative Design of Multi-Layer Web Frame Structure Using Modified AHP and Modified TRIZ Clustering Method

Zone-Ching Lin, Chen-Hsing Cheng, Zone-Ching Lin, 2010 .

Design of the cooling channels in nonrectangular plastic flat injection mold

Zone-Ching Lin, Ming-Ho Chou, Zone-Ching Lin, 2002 .

Simulation Analysis of Nanocutting on the Surface of Sapphire

Zone-Ching Lin, Ying-Chih Hsu, 2012 .

Three-dimensional heat-transfer and thermal-expansion analysis of the work roll during rolling

Zone-Ching Lin, Zone-Ching Lin, Chang-Cheng Chen, 1995 .

A study of the tool-chip interface contact problem under low cutting velocity with an elastic cutting tool

Zone-Ching Lin, Ship-Peng Lo, Ship-Peng Lo, 1997 .

The study of ultra-precision machining and residual stress for NiP alloy with different cutting speeds and depth of cut

Zone-Ching Lin, Zone-Ching Lin, H. Y. Lin, 2000 .

Inverse calculation of the friction coefficient for upsetting a cylindrical mild steel by the experimental load

Zone-Ching Lin, Chun-kung Chen, 2006 .

Inverse calculation of the friction coefficient during the warm upsetting of molybdenum

Zone-Ching Lin, Chun-kung Chen, 2005 .

3D nano-scale cutting model for nickel material

Zone-Ching Lin, Jen-Ching Huang, Yeau-Ren Jeng, 2007 .

Evaluation of machine selection by the AHP method

Zone-Ching Lin, Chu-Been Yang, Zone-Ching Lin, 1996 .

The determination of material strength coefficient and strain hardening constant by inverse method

Zone-Ching Lin, Chang-Cheng Chen, Hsin-Ho Wang, 2009 .

Matrix-presentation linear least square error method of inverse elastic-plastic large deformation finite element model for upsetting

Zone-Ching Lin, V. Lin, 2006 .

Friction coefficient of upsetting with a procedure of combining the inverse model and the Tikhonov method

Zone-Ching Lin, V. Lin, 2006 .

Thermal conductivity investigation for upsetting with a procedure of combining inverse model and the proposed regularization of Tikhonov method

Zone-Ching Lin, Zone-Ching Lin, Ven-Huei Lin, 2005 .

Friction coefficient investigation on IC dam-bar trimming process by inverse method with experimental trimmed geometric profiles

Zone-Ching Lin, Chang-Cheng Chen, Zone-Ching Lin, 2007 .

Application of the grey system in the planning of the measuring points under the range of the dimensional tolerance of a plane workpiece

Zone-Ching Lin, Jin-Jer Chow, Zone-Ching Lin, 2000, Int. J. Comput. Integr. Manuf..

Combining Molecular Statics with Heat Transfer Finite Difference Method for Analysis of Nanoscale Orthogonal Cutting of Single-Crystal Silicon Temperature Field

Zone-Ching Lin, Ying-Chih Hsu, Meng-Hua Lin, 2013 .

Simulation of Two Dimensional Nanoscale Cutting Copper by Quasi-Steady Molecular Statics Method

Zone-Ching Lin, W. Huang, 2013 .

Analysis on Simulation of Quasi-Steady Molecular Statics Nanocutting Model and Calculation of Temperature Rise During Orthogonal Cutting of Single-Crystal Copper

Zone-Ching Lin, Ying-Chih Hsu, 2012 .

Simulation Analysis and Experiment Study of Nanocutting with AFM Probe on the Surface of Sapphire Substrate by Using Three Dimensional Quasi-steady Molecular Statics Nanocutting Model

Zone-Ching Lin, Ying-Chih Hsu, 2011 .

Two Dimensional Quasi-Steady Molecular Statics Nanocutting Simulation for Cutting Copper Material with Point Defect

Zone-Ching Lin, Jia Ye, 2011 .

Simulation of Nanoscale Orthogonal Cutting of Single‐Crystal Silicon

Zone-Ching Lin, Ren-Yuan Wang, Shi Peng, 2011 .

Three Dimensional Nanoscale Abrasive Cutting Simulation and Analysis for Single-Crystal Silicon Workpiece

Zone-Ching Lin, Ren-Yuan Wang, 2010 .

Error analysis and regression mode of the V-grooved sample in the atomic force microscope simulation measurement mode by the molecular mechanics.

Zone-Ching Lin, Jen-Ching Huang, C. Yeh, 2009, Scanning.

An expert system for fixturing design for face milling using modular fixture

Zone-Ching Lin, Ching-Been Yang, Zone-Ching Lin, 1995 .

The effect of tool flank wear on the temperature distribution of a machined workpiece

Zone-Ching Lin, Fu S. Chang, Zone-Ching Lin, 1987 .

3-D finite element simulation of wafer thermal distortion and stress fields in exposure process

Zone-Ching Lin, Wen-Jang Wu, 2002 .

Establishment of transverse beam engineering knowledge coding of door-shaped structure and case-based similarity method

Zone-Ching Lin, Chen-Hsing Cheng, Zone-Ching Lin, 2010, Knowl. Based Syst..

The application of systematic knowledge analysis for improved door structure designs

Zone-Ching Lin, Chen-Hsing Cheng, Zone-Ching Lin, 2010, Expert Syst. Appl..

Investigation on Evaluation of Design Decision for Door-Shaped Structure by Using Systematic Knowledge Analysis

Zone-Ching Lin, Chen-Hsing Cheng, Zone-Ching Lin, 2009 .

The application of the simulated annealing method and heuristic algorithms in the selection of fixture elements

Zone-Ching Lin, Jen-Ching Huang, Zone-Ching Lin, 1997 .

A New Tool Wear Examination Model by Least Square Method for Shearing Process of Thin Metal Sheet

Zone-Ching Lin, Dar-Yuan Chang, Zone-Ching Lin, 2004 .