I. Larson

发表

Method for the calibration of atomic force microscope cantilevers

J. Sader, P. Mulvaney, I. Larson, 1995 .

Applying surface energy derived cohesive-adhesive balance model in predicting the mixing, flow and compaction behaviour of interactive mixtures.

I. Larson, T. Gengenbach, S. Mangal, 2016, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Chitosan nanoparticles enhance the plasma exposure of (-)-epigallocatechin gallate in mice through an enhancement in intestinal stability.

I. Larson, A. Dube, J. Nicolazzo, 2011, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Chitosan-dibasic orthophosphate hydrogel: a potential drug delivery system.

I. Larson, C. Dass, D. Dunstan, 2009, International journal of pharmaceutics.

Calibration of the torsional spring constant and the lateral photodiode response of frictional force microscopes

I. Larson, A. Feiler, P. Attard, 2000 .

Effect of colistin exposure and growth phase on the surface properties of live Acinetobacter baumannii cells examined by atomic force microscopy.

I. Larson, J. Boyce, J. Li, 2011, International journal of antimicrobial agents.

Bulk and dispersed aqueous phase behavior of phytantriol: effect of vitamin E acetate and F127 polymer on liquid crystal nanostructure.

I. Larson, T. Hanley, B. Boyd, 2006, Langmuir : the ACS journal of surfaces and colloids.

Impurities in commercial phytantriol significantly alter its lyotropic liquid-crystalline phase behavior.

I. Larson, H. Amenitsch, T. Hanley, 2008, Langmuir : the ACS journal of surfaces and colloids.

Cell surface hydrophobicity of colistin‐susceptible vs resistant Acinetobacter baumannii determined by contact angles: methodological considerations and implications

I. Larson, J. Boyce, R. Nation, 2012, Journal of applied microbiology.

Enabling Noninvasive Systemic Delivery of the Kv1.3-Blocking Peptide HsTX1[R14A] via the Buccal Mucosa.

R. Norton, I. Larson, B. Boyd, 2016, Journal of pharmaceutical sciences.

Adsorption of nonlamellar nanostructured liquid-crystalline particles to biorelevant surfaces for improved delivery of bioactive compounds.

I. Larson, C. Prestidge, B. Boyd, 2011, ACS applied materials & interfaces.

Use of milling and wet sieving to produce narrow particle size distributions of lactose monohydrate in the sub-sieve range

Handoko Adi, Ian Larson, Peter Stewart, 2007 .

Tribological Properties of Iron Powder Subjected to Various Surface Treatments

L. Bergström, I. Larson, A. Meurk, 1998 .

An approach to characterising the cohesive behaviour of powders using a flow titration aerosolisation based methodology

I. Larson, David A. V. Morton, P. Stewart, 2011 .

Atomic Force Microscopy Investigation of the Morphology and Topography of Colistin-Heteroresistant Acinetobacter baumannii Strains as a Function of Growth Phase and in Response to Colistin Treatment

I. Larson, P. Hartley, J. Li, 2009, Antimicrobial Agents and Chemotherapy.

Investigation of the Changes in Aerosolization Behavior Between the Jet-Milled and Spray-Dried Colistin Powders Through Surface Energy Characterization.

I. Larson, J. Li, Q. Zhou, 2016, Journal of pharmaceutical sciences.

Effective use of reducing agents and nanoparticle encapsulation in stabilizing catechins in alkaline solution

I. Larson, K. Ng, A. Dube, 2010 .

Handbook of Polymers for Pharmaceutical Technologies

V. Thakur, I. Larson, M. K. Thakur, 2015 .

An insight into powder entrainment and drug delivery mechanisms from a modified Rotahaler®.

I. Larson, D. Morton, L. Ho, 2014, International journal of pharmaceutics.

The kinetics of cohesive powder de-agglomeration from three inhaler devices.

I. Larson, David A. V. Morton, P. Stewart, 2011, International journal of pharmaceutics.

Kinetics of emitted mass—A study with three dry powder inhaler devices

I. Larson, David A. V. Morton, P. Stewart, 2011 .

A chitosan hydrogel delivery system for osteosarcoma gene therapy with pigment epithelium-derived factor combined with chemotherapy.

P. Choong, I. Larson, C. Dass, 2009, Biomaterials.

Dry powder formulation combining bedaquiline with pyrazinamide for latent and drug-resistant tuberculosis

I. Larson, Shyamal C. Das, M. Momin, 2019, Advanced Powder Technology.

A strategy to evaluate the surface energy of high packing efficiency fine powders via inverse gas chromatography

I. Larson, Geoffrey Tan, D. Morton, 2017 .

Assessment of plasma concentrations of (-)-epigallocatechin gallate in mice following administration of a dose reflecting consumption of a standard green tea beverage.

I. Larson, A. Dube, J. Nicolazzo, 2011, Food chemistry.

Chitosan nanoparticles enhance the intestinal absorption of the green tea catechins (+)-catechin and (-)-epigallocatechin gallate.

I. Larson, A. Dube, J. Nicolazzo, 2010, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Effect of Surface Coating with Magnesium Stearate via Mechanical Dry Powder Coating Approach on the Aerosol Performance of Micronized Drug Powders from Dry Powder Inhalers

I. Larson, T. Gengenbach, David A. V. Morton, 2012, AAPS PharmSciTech.

Improving aerosolization of drug powders by reducing powder intrinsic cohesion via a mechanical dry coating approach.

I. Larson, D. Morton, P. Stewart, 2010, International journal of pharmaceutics.

Insight into pressure drop dependent efficiencies of dry powder inhalers.

I. Larson, David A. V. Morton, P. Stewart, 2012, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Different surface charge of colistin-susceptible and -resistant Acinetobacter baumannii cells measured with zeta potential as a function of growth phase and colistin treatment.

I. Larson, J. Boyce, J. Li, 2011, The Journal of antimicrobial chemotherapy.

Design, synthesis, and evaluation of a new fluorescent probe for measuring polymyxin-lipopolysaccharide binding interactions.

I. Larson, R. Nation, T. Velkov, 2011, Analytical biochemistry.

Adhesion and Dispersion of Salmeterol Xinafoate from Lactose Interactive Mixtures for Inhalation - Can Surface Roughness of Carriers Determine Performance

I. Larson, P. Hartley, N. Islam, 2009 .

Surface roughness contribution to the adhesion force distribution of salmeterol xinafoate on lactose carriers by atomic force microscopy.

I. Larson, P. Hartley, N. Islam, 2005, Journal of pharmaceutical sciences.

Agglomerate Strength and Dispersion of Salmeterol Xinafoate from Powder Mixtures for Inhalation

I. Larson, P. Stewart, P. Young, 2006, Pharmaceutical Research.

Phytantriol and glyceryl monooleate cubic liquid crystalline phases as sustained‐release oral drug delivery systems for poorly water‐soluble drugs II. In‐vivo evaluation

I. Larson, T. Hanley, B. Boyd, 2010 .

A chitosan-dipotassium orthophosphate hydrogel for the delivery of Doxorubicin in the treatment of osteosarcoma.

P. Choong, I. Larson, C. Dass, 2009, Biomaterials.

Phytantriol and glyceryl monooleate cubic liquid crystalline phases as sustained‐release oral drug delivery systems for poorly water soluble drugs I. Phase behaviour in physiologically‐relevant media

I. Larson, T. Hanley, B. Boyd, 2010 .

Characterization of the surface properties of a model pharmaceutical fine powder modified with a pharmaceutical lubricant to improve flow via a mechanical dry coating approach.

I. Larson, T. Gengenbach, J. Denman, 2011, Journal of pharmaceutical sciences.

Investigation of the extent of surface coating via mechanofusion with varying additive levels and the influences on bulk powder flow properties.

I. Larson, T. Gengenbach, J. Denman, 2011, International journal of pharmaceutics.

Role of agglomeration in the dispersion of salmeterol xinafoate from mixtures for inhalation with differing drug to fine lactose ratios.

I. Larson, P. Stewart, P. Young, 2008, Journal of pharmaceutical sciences.

Phytantriol and glyceryl monooleate cubic liquid crystalline phases as sustained-release oral drug delivery systems for poorly water soluble drugs I. Phase behaviour in physiologically-relevant media.

I. Larson, T. Hanley, B. Boyd, 2010, The Journal of pharmacy and pharmacology.

Particle Engineering of Polymers into Multifunctional Interactive Excipients

I. Larson, S. Mangal, Felix Meiser, 2015 .

Use of surface energy distributions by inverse gas chromatography to understand mechanofusion processing and functionality of lactose coated with magnesium stearate.

I. Larson, David A. V. Morton, P. Stewart, 2011, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Investigating the Particle Engineering of Colistin for Pulmonary Delivery

I. Larson, Jian Li, David A. V. Morton, 2011 .

Total surface energy distributions determined using inverse gas chromatography at finite dilution for understanding the de-agglomeration of lactose powders

I. Larson, David A. V. Morton, P. Stewart, 2011 .

Electrokinetic and Direct Force Measurements between Silica and Mica Surfaces in Dilute Electrolyte Solutions

I. Larson, P. Scales, P. Hartley, 1997 .

Relationship between the cohesion of guest particles on the flow behaviour of interactive mixtures.

I. Larson, T. Gengenbach, S. Mangal, 2016, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Pulmonary Delivery of the Kv1.3-Blocking Peptide HsTX1[R14A] for the Treatment of Autoimmune Diseases.

R. Norton, I. Larson, B. Boyd, 2016, Journal of pharmaceutical sciences.

Pharmaceutics, Drug Delivery and Pharmaceutical Technology Pulmonary Delivery of the Kv1.3-Blocking Peptide HsTX1(R14A) for the Treatment of Autoimmune Diseases

R. Norton, I. Larson, B. Boyd, 2016 .

Effect of mechanical dry particle coating on the improvement of powder flowability for lactose monohydrate: A model cohesive pharmaceutical powder

I. Larson, D. Morton, P. Stewart, 2011 .

Measurement of the Interaction Forces between Poly(N-Isopropylacrylamide-Acrylic Acid) Microgel and Silica Surfaces by Colloid Probe Microscopy

I. Larson, B. Chowdhry, M. Snowden, 2002 .

Importance of particle size and shape on the tensile strength distribution and de-agglomeration of cohesive powders

Ian Larson, Peter Stewart, David Alexander Vodden Morton, 2013 .

Determination of the polar and total surface energy distributions of particulates by inverse gas chromatography.

I. Larson, D. Morton, P. Stewart, 2011, Langmuir : the ACS journal of surfaces and colloids.

Understanding lactose behaviour during storage by monitoring surface energy change using inverse gas chromatography

I. Larson, P. Stewart, P. Young, 2010 .

Direct force measurements between titanium dioxide surfaces

C. Drummond, D. Chan, I. Larson, 1993 .

Atomic force microscopy and direct surface force measurements (IUPAC Technical Report)

I. Larson, J. Ralston, M. Rutland, 2005 .

Surface energy changes and their relationship with the dispersibility of salmeterol xinafoate powders for inhalation after storage at high RH.

I. Larson, P. Stewart, P. Young, 2009, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Measurement of lactose crystallinity using Raman spectroscopy.

Ian Larson, Stuart W. Prescott, Stuart W Prescott, 2005, Journal of pharmaceutical and biomedical analysis.

Particle Engineering of Excipients for Direct Compression: Understanding the Role of Material Properties.

David Morton, Sharad Mangal, Felix Meiser, 2015, Current pharmaceutical design.

A Quantitative Study of Interaction Forces and Friction in Aqueous Colloidal Systems

I. Larson, A. Feiler, P. Attard, 2000 .

Direct Measurement of Repulsive van der Waals Interactions Using an Atomic Force Microscope

Paul Mulvaney, Ian Larson, P. Mulvaney, 1996 .

Experimental study of the deformation and breakage of 3D printed agglomerates: Effects of packing density and inter-particle bond strength

Zongyan Zhou, I. Larson, M. Ghadiri, 2018, Powder Technology.

Deformation of 3D printed agglomerates: Multiscale experimental tests and DEM simulation

Zongyan Zhou, I. Larson, M. Ghadiri, 2020, Chemical Engineering Science.

The role of physico-chemical and bulk characteristics of co-spray dried L-leucine and polyvinylpyrrolidone on glidant and binder properties in interactive mixtures.

I. Larson, S. Lakio, S. Mangal, 2015, International journal of pharmaceutics.

Improving powder flow properties of a cohesive lactose monohydrate powder by intensive mechanical dry coating.

I. Larson, B. Armstrong, D. Morton, 2010, Journal of pharmaceutical sciences.

Strategies to analyse data obtained from liquid intrusion experiments of loose porous materials

I. Larson, Geoffrey Tan, D. Mortona, 2017, Journal of pharmaceutical and biomedical analysis.

Agglomerate properties and dispersibility changes of salmeterol xinafoate from powders for inhalation after storage at high relative humidity.

I. Larson, P. Stewart, P. Young, 2009, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Understanding the interfacial properties of nanostructured liquid crystalline materials for surface-specific delivery applications.

C. Roberts, I. Larson, S. Allen, 2012, Langmuir : the ACS journal of surfaces and colloids.

Relationship between surface concentration of L-leucine and bulk powder properties in spray dried formulations.

I. Larson, T. Gengenbach, J. Denman, 2015, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

Direct Force Measurements between T i 0 2 Surfaces

I. Larson, Y. Chan, Franz Crieser, 2001 .

Direct Force Measurements between Silica and Alumina

C. Drummond, D. Chan, I. Larson, 1997 .

Laser diffraction particle sizing of cohesive lactose powders

I. Larson, P. Stewart, H. Adi, 2007 .

Understanding the influence of powder flowability, fluidization and de-agglomeration characteristics on the aerosolization of pharmaceutical model powders.

I. Larson, David A. V. Morton, B. Armstrong, 2010, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Effect of host particle size on the modification of powder flow behaviours for lactose monohydrate following dry coating

I. Larson, B. Armstrong, D. Morton, 2010 .

Lactose Surface Modification by Decantation: Are Drug-Fine Lactose Ratios the Key to Better Dispersion of Salmeterol Xinafoate from Lactose-Interactive Mixtures?

I. Larson, P. Hartley, N. Islam, 2004, Pharmaceutical Research.

Effect of carrier size on the dispersion of salmeterol xinafoate from interactive mixtures.

I. Larson, P. Hartley, N. Islam, 2004, Journal of pharmaceutical sciences.

Comparison of the Zeta Potential with the Diffuse Layer Potential from Charge Titration

I. Larson, P. Attard, D. Antelmi, 2000 .

Atomic Force Microscopy Studies on Hydroxypropylguar Gels Formed under Shear

I. Larson, D. V. Boger, P. Hartley, 1998 .

Effect of Surface Coating with Magnesium Stearate via Mechanical Dry Powder Coating Approach on the Aerosol Performance of Micronized Drug Powders from Dry Powder Inhalers

I. Larson, T. Gengenbach, David A. V. Morton, 2013, AAPS PharmSciTech.

Structural influence of cohesive mixtures of salbutamol sulphate and lactose on aerosolisation and de-agglomeration behaviour under dynamic conditions.

I. Larson, David A. V. Morton, P. Stewart, 2011, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Nonequilibrium effects in self-assembled mesophase materials: unexpected supercooling effects for cubosomes and hexosomes.

I. Larson, H. Amenitsch, T. Hanley, 2010, Langmuir : the ACS journal of surfaces and colloids.

Adhesion and redistribution of salmeterol xinafoate particles in sugar-based mixtures for inhalation.

Handoko Adi, Ian Larson, I. Larson, 2007, International journal of pharmaceutics.

Investigating the de-agglomeration profiles of dpi formulations

I. Larson, David A. V. Morton, P. Stewart, 2015 .

Effect of the deformability of guest particles on the tensile strength of tablets from interactive mixtures.

I. Larson, T. Gengenbach, S. Lakio, 2016, International journal of pharmaceutics.

On the Methods to Measure Powder Flow.

I. Larson, Geoffrey Tan, David A. V. Morton, 2015, Current pharmaceutical design.

Use of Atomic Force Microscopy Force Measurements To Monitor Citrate Displacement by Amines on Gold in Aqueous Solution

C. Drummond, D. Chan, I. Larson, 1997 .

Direct force measurements between dissimilar metal oxides

C. Drummond, D. Chan, I. Larson, 1995 .

Roflumilast Powders for Chronic Obstructive Pulmonary Disease: Formulation Design and the Influence of Device, Inhalation Flow Rate, and Storage Relative Humidity on Aerosolization

I. Larson, Shyamal C. Das, M. Momin, 2021, Pharmaceutics.

Adsorption of nonlamellar nanostructured liquid-crystalline particles to biorelevant surfaces for improved delivery of bioactive compounds.

I. Larson, C. Prestidge, B. Boyd, 2011, ACS applied materials & interfaces.

Structural influence of cohesive mixtures of salbutamol sulphate and lactose on aerosolisation and de-agglomeration behaviour under dynamic conditions.

I. Larson, David A. V. Morton, P. Stewart, 2011, European journal of pharmaceutical sciences : official journal of the European Federation for Pharmaceutical Sciences.

Powder Strength Distributions for Understanding De-agglomeration of Lactose Powders

I. Larson, David A. V. Morton, P. Stewart, 2012, Pharmaceutical Research.

Influence of storage relative humidity on the dispersion of salmeterol xinafoate powders for inhalation.

I. Larson, P. Stewart, P. Young, 2009, Journal of pharmaceutical sciences.

Effect of the deformability of guest particles on the tensile strength of tablets from interactive mixtures.

I. Larson, T. Gengenbach, S. Lakio, 2016, International journal of pharmaceutics.

A chitosan-dipotassium orthophosphate hydrogel for the delivery of Doxorubicin in the treatment of osteosarcoma.

P. Choong, I. Larson, C. Dass, 2009, Biomaterials.