J. Gibson

发表

Recent progress in research on tungsten materials for nuclear fusion applications in Europe

Huijun Li, T. Weitkamp, C. García-Rosales, 2013 .

On the mechanical properties and deformation mechanisms of manganese sulphide inclusions

J. Gibson, C. Kusche, M. A. Wollenweber, 2020 .

Orientation dependence of the fracture mechanisms in (V,Al)N coatings determined by micropillar compression

J. Schneider, J. Gibson, S. Korte-Kerzel, 2022, Journal of Materials Research.

Small-scale characterisation of irradiated nuclear materials: Part II nanoindentation and micro-cantilever testing of ion irradiated nuclear materials

D. Armstrong, J. Gibson, P. Edmondson, 2015 .

A brief summary of the progress on the EFDA tungsten materials program

Huijun Li, T. Weitkamp, C. García-Rosales, 2013 .

Plastic deformation of the CaMg$_{2}$ C14-Laves phase from 50-250$^\circ$C

Aachen, H Germany, J. Gibson, 2021, 2109.11367.

Plastic deformation of the CaMg2 C14-Laves phase from 50 - 250°C

J. Gibson, M. Zubair, S. Korte-Kerzel, 2021, Materialia.

Plastic deformation of single crystalline C14 Mg2Ca Laves phase at room temperature

J. Gibson, S. Korte-Kerzel, C. Zehnder, 2019, Materials Science and Engineering: A.

Local mechanical properties and plasticity mechanisms in a Zn-Al eutectic alloy

B. Berkels, J. Gibson, S. Korte-Kerzel, 2018, Materials & Design.

Effects of neutron irradiation on the brittle to ductile transition in single crystal tungsten

David J Armstrong, A. Giannattasio, J. Gibson, 2019, Journal of Nuclear Materials.

Mechanical properties of heterogeneous, porous LiFePO4 cathodes obtained using statistical nanoindentation and micromechanical simulations

C. Broeckmann, J. Gibson, S. Korte-Kerzel, 2022, Journal of Power Sources.

Data on measurement of the strain partitioning in a multiphase Zn-Al eutectic alloy

B. Berkels, J. Gibson, S. Korte-Kerzel, 2018, Data in brief.

Investigation of the electroplastic effect using nanoindentation

J. Gibson, S. Korte-Kerzel, G. Gerstein, 2019, Materials & Design.

Mechanical characterisation of the protective Al2O3 scale in Cr2AlC MAX phases

J. Gibson, S. Korte-Kerzel, R. Vaßen, 2019, Journal of the European Ceramic Society.

Eliminating deformation incompatibility in composites by gradient nanolayer architectures

D. Raabe, J. Gibson, S. Korte-Kerzel, 2018, Scientific Reports.

On Extracting Mechanical Properties from Nanoindentation at Temperatures up to 1000$^{\circ}$C

J. Gibson, S. Korte-Kerzel, C. Zehnder, 2017, 1709.07714.

Ni–Cr–Al Alloy for neutron scattering at high pressures

J. Gibson, S. Korte-Kerzel, B. Friedrich, 2019, Materials Science and Technology.

Low temperature deformation of MoSi2 and the effect of Ta, Nb and Al as alloying elements

J. Gibson, S. Neumeier, M. Göken, 2019, Acta Materialia.

Influence of Austenite Conditioning on the Mechanical Properties of a Microalloyed Bainitic Steel

J. Gibson, W. Bleck, S. Korte-Kerzel, 2019, steel research international.

Compatible deformation and extra strengthening by heterogeneous nanolayer composites

D. Raabe, J. Gibson, S. Korte-Kerzel, 2020 .

Full Length Article Plastic deformation of the CaMg 2 C14-Laves phase from 50 - 250°C

J. Gibson, S. Korte-Kerzel, D. Andre, 2021 .

Strengthening of Mg–Al–Ca alloys with C15 and C36 Laves phases

F. Roters, J. Gibson, C. Kusche, 2023, Journal of Materials Research.

Co-deformation between the metallic matrix and intermetallic phases in a creep-resistant Mg-3.68Al-3.8Ca alloy

J. Gibson, M. Zubair, S. Korte-Kerzel, 2021, Materials & Design.

Creep behaviour of eutectic Zn-Al-Cu-Mg alloys

J. Gibson, S. Korte-Kerzel, Yufeng Wang, 2018 .

Mechanical and microstructural investigations of tungsten and doped tungsten materials produced via powder injection molding

M. Rieth, S. Antusch, D. Armstrong, 2015 .

Plasticity of the Nb-Rich μ-Co7Nb6 Phase at Room Temperature and 600 °C

J. Gibson, S. Korte-Kerzel, Zhuocheng Xie, 2023, SSRN Electronic Journal.

Deformation of µm- and mm-sized Fe2.4wt%Si single- and bi-crystals with a high angle grain boundary at room temperature

J. Gibson, S. Korte-Kerzel, R. Pei, 2020, 2004.10598.

Effect of neutron irradiation on the microstructure of tungsten

M. Rieth, D. Armstrong, J. Gibson, 2016 .

High temperature indentation of helium-implanted tungsten

D. Armstrong, J. Gibson, S. Roberts, 2015 .

Eliminating deformation incompatibility in composites by gradient nanolayer architectures

D. Raabe, J. Gibson, S. Korte-Kerzel, 2018, Scientific Reports.

Finding and Characterising Active Slip Systems: A Short Review and Tutorial with Automation Tools

Martin Heller, Wei Luo, Sandra Korte-Kerzel, 2021, Materials.

From quantum to continuum mechanics: studying the fracture toughness of transition metal nitrides and oxynitrides

S. Reese, J. Schneider, J. Gibson, 2018 .

High strain rate testing at the nano-scale: A proposed methodology for impact nanoindentation

J. Gibson, S. Korte-Kerzel, C. Zehnder, 2018 .

Methods to Classify Bainite in Wire Rod Steel

S. Richter, J. Gibson, W. Bleck, 2020, steel research international.

Non-Newtonian Flow to the Theoretical Strength of Glasses via Impact Nanoindentation at Room Temperature

J. Gibson, S. Korte-Kerzel, D. Möncke, 2017, Scientific Reports.

Mechanical properties of cold sintered ZnO investigated by nanoindentation and micro-pillar testing

O. Guillon, M. Bram, J. Gibson, 2021, Journal of the European Ceramic Society.

Plasticity of the Al$_{2}$Cu {\theta}-phase from ambient temperature to 300{\deg}C

J. Gibson, S. Korte-Kerzel, P. Sun, 2021, 2112.06516.

The micro-mechanical properties of ion irradiated tungsten

D. Armstrong, J. Gibson, S. Roberts, 2014 .

The influence of microstructural orientation on fracture toughness in (V, Al)N and (V, Al)(O, N) coatings as measured by microcantilever bending

J. Gibson, C. Kusche, S. Korte-Kerzel, 2023, Journal of Materials Research.