Chandra Nath

发表

Tool life predictions in milling using spindle power with the neural network technique

T. Kurfess, M. Mansori, Cyril Drouillet, 2016 .

Experimental study on ultrasonic elliptical vibration cutting of hardened steel using PCD tools

A. Kumar, Xinquan Zhang, Kui Liu, 2011 .

A study on ultrasonic elliptical vibration cutting of tungsten carbide

M. Rahman, Chandra Nath, K. Neo, 2009 .

Ultrasonic Vibration Cutting: Part II: Ductile Cutting and Analytical Force Models for the Elliptical Vibration Cutting Process

A. Kumar, Mahmudur Rahman, Chandra Nath, 2014 .

An analytical force model for orthogonal elliptical vibration cutting technique

Kui Liu, A. Senthil Kumar, Chandra Nath, 2012 .

Modeling of the Effect of Machining Parameters on Maximum Thickness of Cut in Ultrasonic Elliptical Vibration Cutting

Mahmudur Rahman, Chandra Nath, K. S. Neo, 2011 .

A study on the effect of tool nose radius in ultrasonic elliptical vibration cutting of tungsten carbide

Mahmudur Rahman, Chandra Nath, K. S. Neo, 2009 .

Dopant size dependent variable range hopping conduction in polyaniline nanorods

Ashok Kumar, Chandra Nath, Ashok Kumar, 2014 .

Fractal like charge transport in polyaniline nanostructures

Chandra Nath, Ashok Kumar, A. Kumar, 2013 .

Swift heavy ion irradiation-induced enhancement in structural, conformational and electrical properties of polyaniline nanofibers

Ashok Kumar, Chandra Nath, Ashok Kumar, 2014 .

Machinability study and process optimization in face milling of some super alloys with indexable copy face mill inserts

Thomas R. Kurfess, Chandra Nath, T. Kurfess, 2015 .

Evaluation of Ultrasonic Vibration Cutting while Machining Inconel 718

Mahmudur Rahman, Chandra Nath, Mahmudur Rahman, 2008 .

Design and evaluation of an atomization-based cutting fluid spray system in turning of titanium alloy

Richard E. DeVor, Shiv Gopal Kapoor, Anil K. Srivastava, 2012 .

Finish turning of Ti-6Al-4V with the atomization-based cutting fluid (ACF) spray system

Chandra Nath, S. Kapoor, A. K. Srivastava, 2017 .

On Cutting Temperature Measurement During Titanium Machining With an Atomization-Based Cutting Fluid Spray System

Chandra Nath, S. Kapoor, A. Hoyne, 2015 .

Study of Droplet Spray Behavior of an Atomization-Based Cutting Fluid Spray System for Machining Titanium Alloys

Chandra Nath, S. Kapoor, A. K. Srivastava, 2014 .

Effect of fluid concentration in titanium machining with an Atomization-based Cutting Fluid (ACF) spray system

Chandra Nath, S. Kapoor, A. K. Srivastava, 2013 .

Characterization of Fluid Film Produced by an Atomization-Based Cutting Fluid Spray System During Machining

Chandra Nath, S. Kapoor, A. Hoyne, 2013 .

Droplet Spray Behavior of an Atomization-Based Cutting Fluid (ACF) System for Machining of Titanium Alloys

Chandra Nath, S. Kapoor, A. K. Srivastava, 2012 .

A study on droplets dispersion and deposition characteristics under supersonic spray flow for nanomaterial coating applications

Chandra Nath, Jun Chen, M. Jun, 2021, Surface and Coatings Technology.

Effect of In-Built Anisotropic and Heterogeneous Material Properties on Machinability in Drilling of AISI 304 Stainless Steel

Chandra Nath, L. Zheng, 2020 .

Doping level dependent space charge limited conduction in polyaniline nanoparticles

Chandra Nath, Ashok Kumar, 2012 .

160 MeV Ni12+ ion irradiation effects on the dielectric properties of polyaniline nanotubes

Ashok Kumar, Chandra Nath, Ashok Kumar, 2012 .

Effect of temperature and magnetic field on the electrical transport of polyaniline nanofibers

Chandra Nath, Ashok Kumar, 2013 .

An Enhanced Microstructure-Level Finite Element Machining Model for Carbon Nanotube-Polymer Composites

Shiv Gopal Kapoor, Johnson Samuel, Chandra Nath, 2015 .

Estimating the Cohesive Zone Model Parameters of Carbon Nanotube–Polymer Interface for Machining Simulations

Chandra Nath, S. Kapoor, J. Samuel, 2014 .

Effect of machining parameters in ultrasonic vibration cutting

Mahmudur Rahman, Chandra Nath, M. Rahman, 2008 .

Influence of the material removal mechanisms on hole integrity in ultrasonic machining of structural ceramics.

Chandra Nath, Chandra Nath, G. Lim, 2012, Ultrasonics.

Integrated Tool Condition Monitoring Systems and Their Applications: A Comprehensive Review

Chandra Nath, Chandra Nath, 2020, Procedia Manufacturing.

High thermoelectric figure of merit in nanocrystalline polyaniline at low temperatures

Chandra Nath, Ashok Kumar, Y. Kuo, 2014 .

A study on ultrasonic vibration cutting of low alloy steel

Muhammad Ekhlasur Rahman, Chandra Nath, M. Rahman, 2007 .

Study of spindle power data with neural network for predicting real-time tool wear/breakage during inconel drilling

Thomas R. Kurfess, Mohamed El Mansori, Raphael Corne, 2017 .

Machinability study of tungsten carbide using PCD tools under ultrasonic elliptical vibration cutting

Mahmudur Rahman, Chandra Nath, K. S. Neo, 2009 .

Thermoelectric properties of p-type SrTiO3/graphene layers nanohybrids

Chandra Nath, Y. Kuo, Jagriti Singh, 2019, Journal of Applied Physics.

Cold spray direct writing of flexible electrodes for enhanced performance triboelectric nanogenerators

Chandra Nath, Young Won Kim, Wenzhuo Wu, 2023, Journal of Manufacturing Processes.

Heat conduction in conducting polyaniline nanofibers

Chandra Nath, Ashok Kumar, Y. Kuo, 2013 .

On Machinability Study and Process Optimization in Face Milling of Some Alloys with Indexable Copy Face Mill Inserts

T. Kurfess, Chandra Nath, Zachary E Brooks, 2015 .

Enhancing Spindle Power Data Application with Neural Network for Real-time Tool Wear/Breakage Prediction During Inconel Drilling☆

Thomas R. Kurfess, Mohamed El Mansori, Raphael Corne, 2016 .

A GPU-Accelerated Freeform Surface Offsetting Method for High-Resolution Subtractive 3D Printing (Machining)

Thomas R. Kurfess, Richard Vuduc, Thomas M. Tucker, 2018 .

Step Ring-Based Three-Dimensional Path Planning Via Graphics Processing Unit Simulation for Subtractive Three-Dimensional Printing

Thomas R. Kurfess, Richard Vuduc, Zhengkai Wu, 2017 .

A Feasibility Study on Laser-Mechanical Drilling of SiC Ceramics

Chandra Nath, G. Lim, J. Ko, 2010 .