I. Puente

发表

Analysis of casting rate for the validation of models developed to predict the maximum lateral pressure exerted by self-compacting concrete on vertical formwork

I. Puente, Sofía Teixeira, A. Santilli, 2016 .

Fracture behaviour and pullout analysis in ceramic matrix composites using m0dified Rosen's model

I. Puente, J. Martínez-Esnaola, A. Martín-Meizoso, 1998 .

MODELLING THE TENSILE FRACTURE BEHAVIOUR OF THE REINFORCING FIBRE YARNS IN CERAMIC MATRIX COMPOSITES

A. M. Daniel, I. Puente, J. Martínez-Esnaola, 1997 .

Interaction between Local and Lateral Buckling on Pultruded I-Beams

I. Puente, A. Insausti, M. Azkune, 2009 .

Parametric modelling of 3D printed concrete segmented beams with rebars under bending moments

I. Puente, I. Calderon-Uriszar-Aldaca, A. Aramburú, 2023, Case Studies in Construction Materials.

Experimental and analytical studies on the rotational stiffness of joints for single-layer structures

I. Puente, Aitziber López, Hodei Aizpurua, 2011 .

Bonding strength of steel rebars perpendicular to the hardened 3D-printed concrete layers

I. Puente, I. Calderon-Uriszar-Aldaca, A. Aramburú, 2022, Construction and Building Materials.

3D printing effect on the compressive strength of concrete structures

I. Puente, I. Calderon-Uriszar-Aldaca, A. Aramburú, 2022, Construction and Building Materials.

Numerical model and experimental tests on single-layer latticed domes with semi-rigid joints

I. Puente, M. A. Serna, Miguel Angel Serna, 2007 .

A factorial design study to determine the significant parameters of fresh concrete lateral pressure and initial rate of pressure decay

I. Puente, Martín Tanco, A. Santilli, 2011 .

Rate of placement discussion for the validation of experimental models of fresh concrete lateral pressure in columns

I. Puente, A. Santilli, Aitziber López, 2010 .

Equivalent uniform moment factors for lateral–torsional buckling of steel members

I. Puente, M. A. Serna, Miguel Angel Serna, 2006 .

Direct evaluation of the buckling loads of semi-rigidly jointed single-layer latticed domes under symmetric loading

I. Puente, M. A. Serna, Miguel Angel Serna, 2007 .

Localized stress redistribution after fibre fracture in brittle matrix composites

A. M. Daniel, I. Puente, J. Martínez-Esnaola, 1997 .

Wet joint performance of 3D printed concrete beam segments under flexural loading

I. Puente, I. Calderon-Uriszar-Aldaca, A. Aramburú, 2023, Journal of Building Engineering.

Influence of temperature and concrete reinforcement on vertical formwork design

Adrián Santilli, Sofía Teixeira, I. Puente, 2015 .

Energy absorption in calcium aluminosilicate/SiC glass ceramic matrix composite tensile tests

I. Puente, J. Martínez-Esnaola, A. Martín-Meizoso, 1998 .