I. Tansel

发表

Selection of optimal cutting conditions by using GONNS

Ibrahim N. Tansel, Babur Ozcelik, W. Y. Bao, 2006 .

Evaluation of the health of riveted joints with active and passive structural health monitoring techniques

Ibrahim N. Tansel, Mustafa Demetgul, Volkan Y. Senyurek, 2015 .

Static Load Estimation for Magnetic Alloy Strips by Using Neural Networks

I. Tansel, P. Chen, A. Yenilmez, 2006 .

Simulation of turning operations

Ibrahim N. Tansel, I. Tansel, 1990 .

COMSOL for Simulation of Surface Response Method for Manufacturing Process Performance Monitoring

I. Tansel, H. Fekrmandi, R. Kiflemariam, 2014 .

Selection of optimum cutting condition of cobalt-based superalloy with GONNS

Ibrahim N. Tansel, Mustafa Demetgul, Şeref Aykut, 2010 .

Analysis of high resolution flux data to characterize fouling profiles of membranes with different MWCO under different filtration modes

B. Tansel, I. Tansel, N. Dizge, 2017 .

Detecting chatter and estimating wear from the torque of end milling signals by using Index Based Reasoner (IBR)

K. Bickraj, I. Tansel, B. Kaya, 2010, The International Journal of Advanced Manufacturing Technology.

Loading detection in 3D printed polymer parts using the MWPE method and deep learning

I. Tansel, Alireza Modir, David Perez, 2022, 2022 8th International Conference on Control, Decision and Information Technologies (CoDIT).

Characterization of fouling kinetics in ultrafiltration systems by resistances in series model

Ibrahim N. Tansel, Berrin Tansel, B. Tansel, 2000 .

Optimizations of friction stir welding of aluminum alloy by using genetically optimized neural network

Ibrahim N. Tansel, Ahmet Yapici, Mustafa Demetgul, 2010 .

Conditioning Monitoring and Fault Diagnosis for a Servo-Pneumatic System with Artificial Neural Network Algorithms

Ibrahim N. Tansel, Sezai Taskin, Mustafa Demetgul, 2011 .

Fingerprinting the Lamb wave signals by using S-transformation

Ibrahim N. Tansel, Ahmet Yapici, Srikanth Korla, 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Valve health monitoring with wavelet transformation and neural networks (WT-NN)

I.N. Tansel, A. Yenilmez, J.M. Perotti, 2005, 2005 ICSC Congress on Computational Intelligence Methods and Applications.

Basic computational tools and mechanical hardware for torque-based diagnostic of machining operations

K. Bickraj, I. Tansel, B. Kaya, 2013, J. Intell. Manuf..

Detecting chatter and estimating wear from the torque of end milling signals by using Index Based Reasoner (IBR)

Ibrahim N. Tansel, Babur Ozcelik, Mustafa Demetgul, 2012 .

Modeling micro-end-milling operations. Part III: influence of tool wear

Ibrahim N. Tansel, W. Y. Bao, I. Tansel, 2000 .

Recognition of chatter with neural networks

Ibrahim N. Tansel, A. Wagiman, A. Tziranis, 1991 .

Development of Piezoelectric Strain Gages for Structural Health Monitoring Applications

Ibrahim N. Tansel, Ahmet Yapici, A. Yenilmez, 2007 .

Representation of the Characteristics of Piezoelectric Fiber Composites with Neural Networks

Ibrahim N. Tansel, Ahmet Yapici, L. E. Roth, 2007 .

Tool wear estimation in micro-machining.: Part II: neural-network-based periodic inspector for non-metals

Ibrahim N. Tansel, T. T. Arkan, W. Y. Bao, 2000 .

Micro-end-milling—I. Wear and breakage

Ibrahim N. Tansel, O. Rodriguez, M Trujillo, 1998 .

Modeling micro-end-milling operations. Part II: tool run-out

Ibrahim N. Tansel, W. Y. Bao, I. Tansel, 2000 .

Modeling micro-end-milling operations. Part I: analytical cutting force model

Ibrahim N. Tansel, W. Y. Bao, I. Tansel, 2000 .

Evaluation of New Vegetable-Based Cutting Fluids on Thrust Force and Surface Roughness in Drilling of AISI 304 Using Taguchi Method

I. N. Tansel, E. Kuram, B. Ozcelik, 2011 .

Part based process performance monitoring (PbPPM)

Ibrahim N. Tansel, Ahmet Yapici, I. Tansel, 2013 .

Detection of tool breakage in milling operations-I

Ibrahim N. Tansel, Charles McLaughlin, I. Tansel, 1993 .

Micro-end-milling—III. Wear estimation and tool breakage detection using acoustic emission signals

Ibrahim N. Tansel, Berrin Tansel, M Trujillo, 1998 .

Evaluating the performance of the SuRE method for inspection of bonding using the COMSOL finite element analysis package

Ibrahim N. Tansel, Saman Farhangdoust, Amin Baghalian, 2019, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

Hybrid Driver Concept for Powering the Ornithopters

Ibrahim N. Tansel, Srikanth Korla, Eglin Afb, 2009 .

Selection of optimal machining conditions for the composite materials by using Taguchi and GONNs

Ibrahim N. Tansel, Ömer Erkan, Mustafa Demetgul, 2014 .

The noise reduction techniques for unmanned air vehicles

Ibrahim N. Tansel, Balemir Uragun, I. Tansel, 2014, 2014 International Conference on Unmanned Aircraft Systems (ICUAS).

Non-Contact Quantification of Longitudinal and Circumferential Defects in Pipes using the Surface Response to Excitation (SuRE) Method

I. Tansel, H. Fekrmandi, V. Senyurek, 2020, International Journal of Prognostics and Health Management.

Contact and non-contact approaches in load monitoring applications using surface response to excitation method

Ibrahim N. Tansel, Amin Baghalian, Shervin Tashakori, 2016 .

Detection of tool failure in end milling with wavelet transformations and neural networks (WT-NN)

Ibrahim N. Tansel, Christine Mekdeci, Charles McLaughlin, 1995 .

Taguchi Method-GONNS integration: Complete procedure covering from experimental design to complex optimization

Ibrahim N. Tansel, Mustafa Demetgül, S. Gülmez, 2011, Expert Syst. Appl..

Tool wear estimation in micro-machining.: Part I: tool usage–cutting force relationship

Ibrahim N. Tansel, T. T. Arkan, W. Y. Bao, 2000 .

Determining Initial Design Parameters by Using Genetically Optimized Neural Network Systems

Ibrahim N. Tansel, Mustafa Demetgul, R Sierakowski, 2009 .

Neural Network Based Thickness Estimation from Multiple Radiographic Images

F. Inanc, C. Kropas-Hughes, I. N. Tansel, 2006 .

Selection of optimal material and operating conditions in composite manufacturing. Part II: complexity, representation of characteristics and decision making

Ibrahim N. Tansel, C. V. Kropas-Hughes, S. Y. Yang, 2003 .

Selection of optimal material and operating conditions in composite manufacturing. Part I: computational tool

Ibrahim N. Tansel, C. V. Kropas-Hughes, S. Y. Yang, 2003 .

Analysis of Force Sensing Accuracy by Using SHM Methods on Conventionally Manufactured and Additively Manufactured Small Polymer Parts

I. Tansel, Alireza Modir, 2022, Polymers.

Structural Health Monitoring of Additively Manufactured Parts by Combining Infill Design, Multiple Pulse Width Excitation (MPWE), and Deep Learning

I. Tansel, Alireza Modir, 2022, Journal of Vibration Engineering & Technologies.

Fault diagnosis on material handling system using feature selection and data mining techniques

Ibrahim N. Tansel, Sezai Taskin, Kazim Yildiz, 2014 .

Implementation of heterodyning effect for monitoring the health of adhesively bonded and fastened composite joints

Ibrahim N. Tansel, Amin Baghalian, Shervin Tashakori, 2018 .

The chaotic characteristics of three dimensional cutting

Ibrahim N. Tansel, Cahit Erkal, Triantaphyllos Keramidas, 1992 .

Modelling 3-D cutting dynamics with neural networks

Ibrahim N. Tansel, I. Tansel, 1992 .

A non-contact method for part-based process performance monitoring in end milling operations

Ibrahim N. Tansel, Amin Baghalian, Shervin Tashakori, 2016 .

Design of a smart workpiece holder (SWH) to extend the useful life of micro-tools

Ibrahim N. Tansel, M. Trujillo, A. Nedbouyan, 1995, Proceedings of IECON '95 - 21st Annual Conference on IEEE Industrial Electronics.

Estimation of the chatter zones of drilled holes by using s-transformation

A. Yenilmez, D. Rincon, I. N. Tansel, 2006 .

Modeling workpiece vibrations with neural networks

Ibrahim N. Tansel, Alexander Tziranis, Amir Wagiman, 1993, J. Intell. Manuf..

Transformations in machining. Part 2. Evaluation of machining quality and detection of chatter in turning by using s-transformation

Ibrahim N. Tansel, Babur Ozcelik, Xiaoyu Wang, 2006 .

Genetic tool monitor (GTM) for micro-end-milling operations

Ibrahim N. Tansel, C. Kropas-Hughes, W. Y. Bao, 2005 .

Inspection of the Integrity of a Multi-Bolt Robotic Arm Using a Scanning Laser Vibrometer and Implementing the Surface Response to Excitation Method (SuRE)

I. Tansel, H. Fekrmandi, Javier Rojas, 2020 .

Implementation of the surface thickness on additively manufactured parts for estimation of the loading location

I. Tansel, Alireza Modir, 2020 .

Wave Propagation and Structural Health Monitoring Application on Parts Fabricated by Additive Manufacturing

I. Tansel, Alireza Modir, 2021, Automation.

Diagnostic Assessment of Membrane Health and Performance by S-Transform of Flux Data

B. Tansel, I. Tansel, N. Dizge, 2011 .

Modeling the Propagation of Lamb Waves using a Genetic Algorithm and S-transformation

Ibrahim N. Tansel, Xiaoyu Wang, I. Tansel, 2007 .

Evaluation and Tuning of Magnetostrictive Sensors by Using S‐Transformation

I. N. Tansel, A. Yenilmez, P. Chen, 2006 .

Monitoring the misalignment of machine tools with autoencoders after they are trained with transfer learning data

I. Tansel, Q. Zheng, M. Demetgul, 2023, The International Journal of Advanced Manufacturing Technology.

Fault diagnosis of pneumatic systems with artificial neural network algorithms

Ibrahim N. Tansel, Mustafa Demetgül, S. Taskin, 2009, Expert Syst. Appl..

Detection of tool breakage in milling operations—II. The neural network approach

Ibrahim N. Tansel, Charles McLaughlin, I. Tansel, 1993 .

Prediction of damage location in composite plates using artificial neural network modeling

Ibrahim N. Tansel, Saman Farhangdoust, Amin Baghalian, 2019, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

A novel approach for classification of loads on plate structures using artificial neural networks

Ibrahim N. Tansel, Dwayne McDaniel, Hadi Fekrmandi, 2016 .

Automation of the interpretation of surface response to excitation (SuRE) method by using neural networks

Hadi Fekrmandi, David Meiller, Kyle Lindsay, 2015, 2015 7th International Conference on Recent Advances in Space Technologies (RAST).

Wear estimation by testing the elastic behavior of tool surface

Ibrahim N. Tansel, Srikanth Korla, Liming W. Salvino, 2011 .

Lagrangian Point State Estimation with Optimized, Redundant Induction Coil Gauges

I. Tansel, W. Cooper, B. Reding, 2013, Experimental Mechanics.

Design and testing of an efficient and compact piezoelectric energy harvester

Ibrahim N. Tansel, Ahmet Yapici, Srikanth Korla, 2011, Microelectron. J..

MAPPING OF SUBSURFACE CONTAMINANT PROFILES BY NEURAL NETWORKS

Ibrahim N. Tansel, Berrin Tansel, B. Tansel, 1999 .

Manufacturing Automation, Polymer Composites

Ibrahim N. Tansel, Aylin Yenilmez‐Gurkok, I. Tansel, 2012 .