Saiyi Li

发表

Robust Real-Time Bio-Kinematic Movement Tracking Using Multiple Kinects for Tele-Rehabilitation

Hieu Minh Trinh, Aruna Seneviratne, Pubudu N. Pathirana, 2016, IEEE Transactions on Industrial Electronics.

Assessment of human kinematic performance with non-contact measurements for tele-rehabilitation

Saiyi Li, 2015 .

A novel bio-kinematic encoder for human exercise representation and decomposition - Part 2: Robustness and optimisation

M. Ferraro, T. Caelli, Saiyi Li, 2013, 2013 International Conference on Control, Automation and Information Sciences (ICCAIS).

Modeling texture evolution in equal channel angular extrusion using crystal plasticity finite element models

S. Kalidindi, Saiyi Li, Brendan R. Donohue, 2009 .

Plastic anisotropy and texture evolution during tensile testing of extruded aluminium profiles

P. Houtte, P. van Houtte, Saiyi Li, 2005 .

Statistical analysis of grain boundary mobility in Al simulated using a modified synthetic driving force molecular dynamics method

Saiyi Li, Liang Yang, Chunming Lai, 2018, Materials Letters.

A modified synthetic driving force method for molecular dynamics simulation of grain boundary migration

Saiyi Li, Liang Yang, 2015 .

Atomistic simulations of energies for arbitrary grain boundaries. Part I: Model and validation

Saiyi Li, Liang Yang, Chunming Lai, 2019, Computational Materials Science.

Atomistic simulations of energies for arbitrary grain boundaries. Part II: Statistical analysis of energies for tilt and twist grain boundaries

Saiyi Li, Liang Yang, Chunming Lai, 2019, Computational Materials Science.

Crystallographic analysis of the influence of stress state on earing behavior in deep drawing of face-centered cubic metals

Saiyi Li, G. Gottstein, Xu-hu Zhang, 1997 .

On the selection of outlet channel length and billet length in equal channel angular extrusion

Saiyi Li, Donghong Zhang, Hao Li, 2010 .

Analysis and Prediction of Earing Behavior in Cup Drawing of BCC Metals by Use of Crystallographic Method

Saiyi Li, G. Gottstein, Xin-Mingm Zhang, 1999 .

Microstructure and mechanical properties of twin-roll cast Mg–4.5Al–1.0Zn sheets processed by differential speed rolling

Saiyi Li, X. Gong, S. Kang, 2010 .

Enhanced plasticity of twin-roll cast ZK60 magnesium alloy through differential speed rolling

Saiyi Li, X. Gong, S. Kang, 2009 .

Analysis of crystallographic twinning and slip in fcc crystals under plane strain compression

Saiyi Li, Fu-chi Wang, H. Cai, 2007 .

Yield vertices for {123}〈111〉 multiple slip

Saiyi Li, Zhiyong Chen, Xu-hu Zhang, 2000 .

Progressive texture evolution during equal channel angular extrusion

I. Beyerlein, E. Pereloma, Saiyi Li, 2006 .

On the development of microstructure and texture heterogeneity in ECAE via route C

I. Beyerlein, Saiyi Li, C. Necker, 2006 .

A survey of the crystallography-dependency of twist grain boundary mobility in Al based on atomistic simulations

Saiyi Li, Liang Yang, Chunming Lai, 2020 .

Development of through-thickness texture gradient and persistence of shear-type textures during annealing of commercial purity aluminium sheet processed by accumulative roll-bonding

Saiyi Li, Liang Yang, Nan Qin, 2017 .

Analysis of Crystallographic Textures in Aluminum Plates Processed by Equal Channel Angular Extrusion

Saiyi Li, O. Mishin, 2014, Metallurgical and Materials Transactions A.

A Rate-Dependent Crystal Plasticity Analysis of Orientation Stability in Biaxial Tension of Magnesium

Saiyi Li, Donghong Zhang, 2011 .

Observation and modeling of the through-thickness texture gradient in commercial-purity aluminum sheets processed by accumulative roll-bonding

Saiyi Li, F. Sun, Hao Li, 2010 .

Orientation stability in equal channel angular extrusion. Part II: Hexagonal close-packed materials

Saiyi Li, 2008 .

Orientation stability in equal channel angular extrusion. Part I: Face-centered cubic and body-centered cubic materials

Saiyi Li, 2008 .

Characterization of deformation textures in pure copper processed by equal channel angular extrusion via route A

I. Beyerlein, Saiyi Li, D. Alexander, 2006 .

Effect of processing route on microstructure and texture development in equal channel angular extrusion of interstitial-free steel

I. Beyerlein, E. Pereloma, Saiyi Li, 2006 .

Texture evolution during equal channel angular extrusion: Effect of initial texture from experiment and simulation

I. Beyerlein, Saiyi Li, S. Vogel, 2005 .

Effect of intermediate annealing on texture evolution and plastic anisotropy in an Al-Mg autobody alloy

Saiyi Li, S. Kang, H. Ko, 2000 .

Performance of statistical (Taylor, Lamel) and CP-FE models in texture predictions of aluminum alloys in cold rolling

P. Houtte, Saiyi Li, 2002 .

A crystal plasticity finite element analysis of cross-grain deformation heterogeneity in equal channel angular extrusion and its implications for texture evolution

S. Kalidindi, Saiyi Li, Brendan R. Donohue, 2008 .

A quantitative evaluation of the deformation texture predictions for aluminium alloys from crystal plasticity finite element method

P. Houtte, S. Kalidindi, Saiyi Li, 2004 .

Role of strain path change in grain refinement by severe plastic deformation: A case study of equal channel angular extrusion

Saiyi Li, Liang Yang, Xuewen Li, 2013 .

Development of Microstructure and Texture Heterogeneities during Static Annealing of Ti–6.5Al–3.5Mo–1.5Zr–0.3Si Alloy Preformed by Hot Working

Saiyi Li, L. Lei, Huiru Zhang, 2012 .

Texture formation during equal channel angular extrusion of fcc and bcc materials: comparison with simple shear

Mark A.M. Bourke, Saiyi Li, I. Beyerlein, 2005 .

Orientation dependencies of mechanical response, microstructure and texture evolution in hot compression of AZ31 magnesium alloy processed by equal channel angular extrusion

Saiyi Li, Donghong Zhang, 2011 .

Finite element analysis of the plastic deformation zone and working load in equal channel angular extrusion

Mark A.M. Bourke, Saiyi Li, Bjørn Clausen, 2004 .

Microstructure and texture evolution during equal channel angular extrusion of interstitial-free steel: effects of die angle and processing route

Saiyi Li, Irene J. Beyerlein, Chris Huw John Davies, 2007 .

Texture evolution during multi-pass equal channel angular extrusion of copper : Neutron diffraction characterization and polycrystal modeling

Saiyi Li, Sven C. Vogel, I. Beyerlein, 2005 .

Heterogeneity of deformation texture in equal channel angular extrusion of copper

Mark A.M. Bourke, Saiyi Li, I. Beyerlein, 2004 .

Alloy-dependent rolling texture simulation of aluminium alloys with a grain-interaction model

Saiyi Li, O. Engler, M. Crumbach, 2005 .

Deformation texture prediction: from the Taylor model to the advanced Lamel model

Paul Van Houtte, Laurent Delannay, Saiyi Li, 2005 .

Influences of crystallographic orientations on deformation mechanism and grain refinement of Al single crystals subjected to one-pass equal-channel angular pressing

Saiyi Li, W. Han, Zhefeng Zhang, 2007 .

Effect of annealing on microstructure and mechanical properties of ZK60 magnesium alloy sheets processed by twin-roll cast and differential speed rolling

Saiyi Li, X. Gong, S. Kang, 2014 .

Modelling texture evolution in equal channel angular extrusion of bcc materials: effects of processing route and initial texture

I. Beyerlein, Saiyi Li, 2005 .

Dependencies of grain refinement on processing route and die angle in equal channel angular extrusion of bcc materials

Saiyi Li, 2009 .

Directionality of slip traces and banded structures in fcc materials processed by equal-channel angular extrusion

Saiyi Li, 2012 .

Entropy-based method to quantify limb length discrepancy using inertial sensors

Pubudu N. Pathirana, Saiyi Li, M. Sajeewani Karunarathne, 2018, IET Wirel. Sens. Syst..

Finite element modeling of plastic anisotropy induced by texture and strain-path change

Albert Van Bael, Paul Van Houtte, Cristian Teodosiu, 2003 .

Effect of strain path change on the plastic responses during uniaxial loading of materials pre-deformed by equal channel angular extrusion

Saiyi Li, 2007 .

Quantitative Assessment of ADL: A Pilot Study of Upper Extremity Reaching Tasks

Pubudu N. Pathirana, Saiyi Li, Mary P. Galea, 2015, J. Sensors.

Modeling the plastic anisotropy in pure copper after one pass of ECAE

I. Beyerlein, Saiyi Li, D. Alexander, 2005 .

Cloud-based non-invasive tele-rehabilitation exercise monitoring

Pubudu N. Pathirana, Saiyi Li, P. Pathirana, 2014, 2014 IEEE Conference on Biomedical Engineering and Sciences (IECBES).

Dual Kalman filter for estimating load-free human motion kinematic energy expenditure

Pubudu N. Pathirana, Saiyi Li, Gareth L. Williams, 2018, Biomed. Signal Process. Control..

Preliminary investigation of energy comparation between gyroscope, electromyography and VO2 wearable sensors

Pubudu N. Pathirana, Saiyi Li, Gareth L. Williams, 2016, 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC).

A general pose estimation algorithm in a multi-Kinect system

Pubudu N. Pathirana, Saiyi Li, Jason Bonacci, 2014, 7th International Conference on Information and Automation for Sustainability.

An adaptive orientation misalignment calibration method for shoulder movements using inertial sensors: A feasibility study

Pubudu N. Pathirana, Samitha W. Ekanayake, Saiyi Li, 2015, 2015 International Symposium on Bioelectronics and Bioinformatics (ISBB).

A Mobile Cloud Computing Framework Integrating Multilevel Encoding for Performance Monitoring in Telerehabilitation

Pubudu N. Pathirana, Samitha W. Ekanayake, Yee Siong Lee, 2015 .

Finite element analysis of bending behavior and strain heterogeneity in snake rolling of AA7050 plates using a hyperbolic sine-type constitutive law

Saiyi Li, Jie Liu, Xin-Mingm Zhang, 2017 .

Microstructure, texture and mechanical properties of AA1060 aluminum plate processed by snake rolling

Saiyi Li, Jie Liu, Xin-Mingm Zhang, 2016 .

A crystal plasticity finite element analysis of texture evolution in equal channel angular extrusion

Surya R. Kalidindi, Saiyi Li, Irene J. Beyerlein, 2005 .

A Syntactic Two-Component Encoding Model for the Trajectories of Human Actions

Terry Caelli, Mario Ferraro, Pubudu N. Pathirana, 2014, IEEE Journal of Biomedical and Health Informatics.