Yuji Furukawa

发表

Controllable Bio-Microactuator Powered by Muscle Cells

Keisuke Morishima, Yoshitake Akiyama, Yuji Furukawa, 2006, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

Dynamic Stiffness of Machine Tool Feed Driving System : 2nd Report, Experimental Evaluation on the Damping Capacity of Slideway

Yuji Furukawa, Masahiro Mizukane, Susumu Shiozaki, 1980 .

Vibration analysis and work-rounding mechanism in centerless grinding☆

Masakazu Miyashita, Yuji Furukawa, Susumu Shiozaki, 1971 .

Development of Ultra Precision Machine Tool Made of Ceramics

Yuji Furukawa, Nobuyuki Moronuki, K. Kitagawa, 1986 .

2P552 Reconstruction of Biomechanical Component using Insect Tissue for a Quasi-Living Actuator(53. Bioengineering,Poster Session,Abstract,Meeting Program of EABS & BSJ 2006)

Keisuke Morishima, Yoshitake Akiyama, Yuji Furukawa, 2006 .

An Outlook for Manufacturing Science

Yuji Furukawa, 2006 .

Development of Ultrasonic Micro Motor with a Coil Type Stator

Yuji Furukawa, Tomoyuki Kaga, Tetsuro Wada, 2010 .

Nanopillar Formation via Defect Activation and Coulomb Explosion Initiated by a 355 nm Nd:YAG Laser Beam

Yujie Han, Yuji Furukawa, Yujie Han, 2004, 2004 International Conference on MEMS, NANO and Smart Systems (ICMENS'04).

Contact deformation of machine tool slideway and its effect on machining accuracy.

Yuji Furukawa, Nobuyuki Moronuki, N. Moronuki, 1987 .

Fabrication of a Linear Motion Microsystem on a Si Wafer

Yuji Furukawa, Nobuyuki Moronuki, Yasuomi Mikami, 1996 .

Chatter Vibration in Centerless Grinding : Research 2, Influence of Growing up Mechanism of Self-Excited Chatter Vibration upon Finishing Accuracy

Masakazu Miyashita, Yuji Furukawa, Susumu Shiozaki, 1972 .

1P1-C12 Development of Micro Fluid Handing Device based on Cardiomyocytes actuator

Keisuke Morishima, Masako Yamada, Yoshitake Akiyama, 2006 .

446 Development of iMuscle Block for Mechano-Bionic System

Keisuke Morishima, Masayuki Hashimoto, Yoshitake Akiyama, 2007 .

CIM, Its Application, Technology and Future

Yuji Furukawa, 1995, J. Robotics Mechatronics.

Product Life Cycle Design (LCD) & Strategy for Manufacturing Technology

Yuji Furukawa, 2000 .

Suppression Mechanism of Build-Up of Chatter Vibration

Yuji Furukawa, Susumu Shiozaki, Norio Shiga, 1973 .

Contact Deformation of a Machine Tool Slideway and Its Effect on Machining Accuracy : Vibration, Control Engineering, Engineering for Industry

Yuji Furukawa, Nobuyuki Moronuki, 1987 .

Measures for Prevention of Impediments from Noise in Working Environments

Yuji Furukawa, 1993 .

A Study on Controlling Algorithm to Realize High-Speed & High-Accuracy Control Systems - Proposal of modified Delta Operator -

Yuji Furukawa, Nobuyuki Moronuki, Tatsu Aoki, 1997, J. Robotics Mechatronics.

Development of a New Traveling Wave Ultrasonic Micro Motor : Application to Catheter in Micro Blood Vessels(Nano/micro measurement and intelligent instrument)

Yuji Furukawa, Akihei Nakajima, Tadashi Moriya, 2005 .

Development of Hybrid Bearing for Wide Speed Range, Quill Type Spindle Unit

Yuji Furukawa, 1987 .

An Approach to Realization of Factory Automation and Some Technical Problems( the Factory Automation)

Yuji Furukawa, 1983 .

Design concepts for electronics factories of the future

Yuji Furukawa, 1989 .

Automatic Detection of Defects among Small Pins Group — Inspection of Connector-Plug Pins by the Use of Image Processing Associated with Neural Network

Yuji Furukawa, Hideo Sakuma, 1992 .

On the design of ultra-precise aerostatic linear guideway.

Yuji Furukawa, Nobuyuki Moronuki, Hiroyoshi Kubo, 1989 .

Development of Personal-Use CAD/CAM System to Estimate Finishing Accuracy. The Case of End Milling of Side Faces.

Tetsuo Yokoyama, Yuji Furukawa, Keiichi Asahina, 1995 .

The Design and Development of Creep Feed Grinding Machine and Wheel and their Optimal Utilization in View of Workpiece Burning

Yuji Furukawa, Susumu Shiozaki, Susumu Ohishi, 1980 .

Control of Machine Tools

Kenji Uchiyama, Yuji Furukawa, 2000 .

2A2-M03 Construction and Function Emergence of Cellular Build up Wet Nano Robotics : Fabrication and Evaluation of Gripper of Cell-Sheet for Measurement of Cell-Adhesion Force

Keisuke Morishima, Yoshitake Akiyama, Yuji Furukawa, 2009 .

Culture of insect cells contracting spontaneously; research moving toward an environmentally robust hybrid robotic system.

Keisuke Morishima, Yoshitake Akiyama, Yuji Furukawa, 2008, Journal of biotechnology.

Design principle and prototyping of a direct photosynthetic/metabolic biofuel cell (DPMFC)

Keisuke Morishima, Yuji Furukawa, K. Morishima, 2006 .

Chatter Vibration in Centerless Grinding : Research 1, Work-Rounding Mechanism under the Generation of Self-Excited Vibration

Masakazu Miyashita, Yuji Furukawa, Susumu Shiozaki, 1970 .

Development of a flexible direct photosynthetic/metabolic biofuel cell for mobile use

Keisuke Morishima, Yuji Furukawa, K. Morishima, 2009 .

Calculations of the effect of material anisotropy on microcutting processes

Yuji Furukawa, Nobuyuki Moronuki, Yuan Liang, 1994 .

Frictional Properties of the Micro-Textured Surface of Anisotropically Etched Silicon

Yuji Furukawa, Nobuyuki Moronuki, N. Moronuki, 2003 .

FABRICATION AND EVALUATION OF TEMPERATURE-TOLERANT BIOACTUATOR DRIVEN BY INSECT HEART CELLS

Yuji Furukawa, Kikuo Iwabuchi, K. Morishima, 2008 .

Analysis of Workpiece Temperature and Grinding Burn in Creep Feed Grinding

Yuji Furukawa, Susumu Ohishi, Y. Furukawa, 1985 .

Generation and Growing Up Process of Self-Excited Chatter Vibration in Grinding

Yuji Furukawa, Susumu Shiozaki, Masakazu Miyahshita, 1970 .

Muscle-actuated power generator using cultured cardiomyocytes and pzt fiber

Keisuke Morishima, Yoshitake Akiyama, Yuji Furukawa, 2006, 2006 International Conference of the IEEE Engineering in Medicine and Biology Society.

Rod-shaped Tissue Engineered Skeletal Muscle with Artificial Anchors to Utilize as a Bio-Actuator

Takayuki Hoshino, Keisuke Morishima, Yoshitake Akiyama, 2010 .

Long-term and room temperature operable bioactuator powered by insect dorsal vessel tissue.

Keisuke Morishima, Yoshitake Akiyama, Yuji Furukawa, 2009, Lab on a chip.

On the design of precise feed mechanism by friction drive.

Yuji Furukawa, Nobuyuki Moronuki, 1988 .

Electrical stimulation of cultured lepidopteran dorsal vessel tissue: an experiment for development of bioactuators

Keisuke Morishima, Yoshitake Akiyama, Yuji Furukawa, 2010, In Vitro Cellular & Developmental Biology - Animal.

Adaptive control of workpiece burn in creep feed grinding.

Yuji Furukawa, Susumu Ohishi, Tun Kitamura, 1985 .

Dressing accuracy of superabrasive wheels dressed by kelly driven rotary diamond dresser.

Yuji Furukawa, Munehiko Yokogawa, 1989 .

Dressing Performance of Prismatic Monocrystalline Diamond Dresser.

Yuji Furukawa, Munehiko Yokogawa, 1994 .