H. Huh

发表

Optimum design of tailor welded blanks in sheet metal forming processes by inverse finite element analysis

Choong-Ho Lee, H. Huh, S. Han, 1998 .

Eulerian finite-element modeling of the extrusion process for work-hardening materials with the extended concept of limit analysis

Hoon Huh, Choong-Ho Lee, H. Huh, 1993 .

Specimen and Grain Size Effects of Al1100 on Strain and Strain Rate Hardening at Various Strain Rates for Al1100

H. Huh, J. Kwon, Jeong-Heon Kim, 2014 .

Strain hardening model of pure titanium considering effects of deformation twinning

H. Huh, Jonghun Yoon, Kwanghyun Ahn, 2013, Metals and Materials International.

Investigation of deformation and collapse mechanism for magnesium tube in axial crushing test

H. Huh, Jonghun Yoon, Youngseon Lee, 2013 .

Sheet metal forming analysis of planar anisotropic materials by a modified membrane finite element method with bending effect

Hoon Huh, Th Choi, H. Huh, 1999 .

Modified membrane finite element formulation for sheet metal forming analysis of planar anisotropic materials

Hoon Huh, H. Huh, T. Choi, 2000 .

New ductile fracture criterion for prediction of fracture forming limit diagrams of sheet metals

Hoon Huh, Yanshan Lou, Keunhwan Pack, 2012 .

A method for multidimensional wave propagation analysis via component‐wise partition of longitudinal and shear waves

S. S. Cho, K. Park, H. Huh, 2013 .

A method for computation of discontinuous wave propagation in heterogeneous solids: basic algorithm description and application to one‐dimensional problems

Hoon Huh, K. Park, H. Huh, 2012 .

Dynamic Hardening of AISI 304 Steel at a Wide Range of Strain Rates and Its Application to Shot Peening Simulation

H. Huh, R. Kolman, Sungbok Lee, 2022, Metals.

ENERGY ABSORPTION OF EXPANSION TUBE CONSIDERING LOCAL BUCKLING CHARACTERISTICS

H. Huh, Kwanghyun Ahn, J. Kim, 2008 .

Structural Analysis of the Micro-Former based on Results from the Forming Analysis for Milli-components

H. Huh, J. Yoon, T. Choi, 2005 .

Multi-Stage Forming Analysis of a Milli-Component for Improvement of Forming Accuracy

H. Huh, J. Yoon, T. Choi, 2004 .

Rate-dependent isotropic‒kinematic hardening model in tension‒compression of TRIP and TWIP steel sheets

H. Huh, G. Joo, 2017, International Journal of Mechanical Sciences.

Tension/compression hardening behaviors of auto-body steel sheets at intermediate strain rates

H. Huh, M. Choi, G. Joo, 2016 .

Tension/compression test of auto-body steel sheets with the variation of the pre-strain and the strain rate

H. Huh, G. Bae, 2011 .

Tension/compression test of auto-body steel sheets with the variation of the pre-strain and the strain rate

H. Huh, G. Bae, 2011 .

Rate-dependent hardening model for pure titanium considering the effect of deformation twinning

H. Huh, Jonghun Yoon, Kwanghyun Ahn, 2015 .

Evaluation of dynamic hardening models for BCC, FCC, and HCP metals at a wide range of strain rates

H. Huh, Ji-Ho Lim, Kwanghyun Ahn, 2014 .

Optimum Design of the Process Parameter in Sheet Metal Forming with Design Sensitivity Analysis using the Direct Differentiation Approach (II) -Optimum Process Design-

H. Huh, Se-Ho Kim, 2002 .

Optimum Design of the Process Parameter in Sheet Metal Forming with Design Sensitivity Analysis using the Direct Differentiation Approach (I) -Design Sensitivity Analysis-

H. Huh, Se-Ho Kim, 2002 .

Failure Elongation of Steel Sheets for an Autobody at the High Strain Rate

H. Huh, J. Song, J. Yoon, 2008 .

Formability of the Steel Sheet at the Intermediate Strain Rate

H. Huh, S. Han, Ji-Ho Lim, 2004 .

High Speed Tensile Tests of Plastics at the Intermediate Strain Rate

H. Huh, K. Lee, J. Lim, 2004 .

Comparative investigation of ductile fracture with 316L austenitic stainless steel in small punch tests: Experiments and simulations

H. Huh, N. Park, J. Hůlka, 2018, Theoretical and Applied Fracture Mechanics.

Correlation of the maximum shear stress with micro-mechanisms of ductile fracture for metals with high strength-to-weight ratio

J. Song, J. Yoon, H. Huh, 2018, International Journal of Mechanical Sciences.

Measurement Uncertainty Evaluation for High Speed Tensile Properties of Auto-body Steel Sheets

H. Huh, Chul-Young Kim, K. S. Chae, 2014 .

Dynamic failure characterization of laser welds under combined loading conditions

H. Huh, H. Huh, J. Ha, 2013, International Journal of Automotive Technology.

Formability Prediction of Advanced High Strength Steel with a New Ductile Fracture Criterion

H. Huh, S. Lim, Y. Lou, 2011 .

Effect of Pre-strain on Tensile Properties of Al5052-H32 under an Electropulsing Condition

J. Song, H. Huh, Minki Kim, 2017 .

Compatible finite element modelling of laser welded region for crash analysis of autobody assemblies

H. Huh, Yi An, C. Park, 2010 .

Tensile behavior of aluminum/carbon fiber reinforced polymer hybrid composites at intermediate strain rates

H. Huh, H. Kim, D. Shin, 2015 .

Rate Dependent Material Properties of an OFHC copper Film

H. Huh, Jin Sung. Kim, Jin Sung Kim, 2011 .

Characterization of Hardening Behaviors of 4130 Steel, OFHC Copper, Ti6Al4V Alloy Considering Ultra-High Strain Rates and high Temperatures

Ikjin Lee, H. Huh, M. Piao, 2017 .

An Improved Technique for Reducing the Load Ringing Phenomenon in Tensile Tests at High Strain Rates

H. Huh, J. Kwon, C. Ahn, 2016 .

Finite Element Analysis of Polycrystalline Deformation with the Rate‐dependent Crystal Plasticity

H. Huh, J. Yoon, Yongjing Lee, 2007 .

STRESS EVALUATION OF NANOCOMPOSITES WITH NANOPLATELETS

H. Huh, J. Song, J. Song, 2003 .

Efficiency enhancement in sheet metal forming analysis with a mesh regularization method

H. Huh, J. Yoon, 2003 .

Prediction of fracture forming limit for DP780 steel sheet

H. Huh, Y. Lou, S. J. Lim, 2013, Metals and Materials International.

Prediction of fracture in Hub-hole Expansion Process Using Ductile fracture Criteria

H. Huh, Sang-hu Park, H. K. Kim, 2004 .

Construction of the Hill48 and Yld89 for Auto-body Steel Sheets considering the Strain Rate

H. Huh, Y. Lou, C. Lee, 2010 .

Fracture loci of DP980 steel sheet for auto-body at intermediate strain rates

H. Huh, Sung Jun Lim, 2017, International Journal of Automotive Technology.

Multi-body dynamic stress analysis of a crankshaft for V8 engine

H. Huh, G. Han, Shin-Sik Han, 2008 .

Optimum design of trimming line by one-step analysis for auto body parts

Hoon Huh, Yi Dong Bao, H. Huh, 2007 .

Tensile Properties of Sheet Metals at Intermediate Strain Rates with Pre‐Strain

H. Huh, Seok-Bong Kim, 2015 .

Characterization of the Material Properties of Sheet Metal for Auto-body at the High Strain Rate Considering the Pre-strain Effect

H. Huh, Ji-Ho Lim, J. Lim, 2004 .

Study on the characterization of the dynamic material properties of sheet metal for auto-body considering the pre-strain effect

H. Huh, Ji-Ho Lim, Seok-Bong Kim, 2003 .

A simulation-based prediction model of the restraining and normal force of draw-beads with a normalization method

Hoon Huh, Gihyun Bae, H. Huh, 2012, Metals and Materials International.

Dynamic hardening equation of the auto-body steel sheet with the variation of temperature

Hoon Huh, H. J. Lee, H. Huh, 2011 .

Correlation of Microstructure with Mechanical Properties of Zr-Based Amorphous Matrix Composite Reinforced with Tungsten Continuous Fibers and Ductile Dendrites

H. Huh, Sang-kwan Lee, Hyoung-Seop Kim, 2012, Metallurgical and Materials Transactions A.

Dynamic tensile characteristics of TRIP-type and DP-type steel sheets for an auto-body

Hoon Huh, Ji-Ho Lim, H. Huh, 2008 .

Finite Element Analysis of Diaphragm-type Air Springs with Fiber-reinforced Rubber Composites

S. H. Kim, H. W. Lee, H. Huh, 2003 .

Finite Element Analysis of Air Springs with Fiber-Reinforced Rubber Composites Using 3-D Shell Elements

H. Huh, H. Lee, 2001 .

Evaluation of rate-dependent hardening behaviors of AHSS sheets with novel tension and compression test devices

H. Huh, J. Kwon, G. Joo, 2019, Journal of Materials Processing Technology.

Rate-dependent hardening model for polymer-bonded explosives with an HTPB polymer matrix considering a wide range of strain rates

H. Huh, Jungsu Park, Chunghee Park, 2015 .

Correlation of microscopic structures to the strain rate hardening of SPCC steel

C. Park, H. Huh, M. Huh, 2010 .

Asymmetric Hardening Behavior of AZ31B Magnesium Alloy Sheet with Large Strain at Various Strain Rates

H. Huh, Minki Kim, 2019, International Journal of Automotive Technology.

Optimization of Three-Wheel Vehicle Roof Structures Against Rollover Accidents

Hoon Huh, Jesung Yoo, H. Huh, 2020 .

Optimization of Three-Wheel Vehicle Roof Structures Against Rollover Accidents

H. Huh, Jesung Yoo, 2020, International journal of automotive technology.

Material properties of the nugget zone in resistance spot-welded DP980 steel joint at various strain rates

H. Huh, J. Kwon, N. Park, 2018 .

A Newly Developed Clamping Device for the Tension/Compression Test at Various Strain Rates

H. Huh, M. Choi, G. Joo, 2014 .

Effect of Punch Speed on Amount of Springback in U-bending Process of Auto-body Steel Sheets

Hoon Huh, Min Kuk Choi, H. Huh, 2014 .

CRASHWORTHINESS ASSESSMENT OF SIDE IMPACT OF AN AUTO-BODY WITH 60TRIP STEEL FOR SIDE MEMBERS

Hoon Huh, Lee, J. H. Lim, 2003 .

Consideration of strength differential effect in sheet metals with symmetric yield functions

J. Yoon, H. Huh, Y. Lou, 2013 .

A tension split Hopkinson bar for investigating the dynamic behavior of sheet metals

Hoon Huh, Soo Sik Han, H. Huh, 2002 .

The Effect of Strain Rate on the Material Characteristics of Nickel-Based Superalloy Inconel 718

J. Song, H. Huh, 2006 .

Modified Johnson-Cook model for vehicle body crashworthiness simulation

W. J. Kang, Wj J. Kang, Ss S. Cho, 1999 .

Measurement of R-values at Intermediate Strain Rates using a Digital Speckle Extensometry

H. Huh, Yongdeok Kim, J. Huh, 2011 .

Forming limit diagram of auto-body steel sheets for high-speed sheet metal forming

Hoon Huh, Man-Been Moon, H. Huh, 2011 .

Evaluation of the Material Properties of an OFHC Copper Film at High Strain Rates Using a Micro-Testing Machine

Hoon Huh, H. Huh, J. S. Kim, 2011 .

Failure characterization of spot welds under combined axial–shear loading conditions

Hoon Huh, J. H. Song, H. Huh, 2011 .

Microscopic Investigation of the Strain Rate Hardening for Polycrystalline Metals

C. G. Park, H. Huh, J. Yoon, 2008 .

Anisotropic fracture forming limit diagram considering non-directionality of the equi-biaxial fracture strain

J. Yoon, H. Huh, N. Park, 2018, International Journal of Solids and Structures.

Finite element inverse analysis for the design of intermediate dies in multi-stage deep-drawing processes with large aspect ratio

Hoon Huh, Se-Ho Kim, H. Huh, 2001 .

Fracture-based forming limit criteria for anisotropic materials in sheet metal forming

H. Huh, N. Park, Y. Lou, 2017 .

Prediction of ductile fracture for advanced high strength steel with a new criterion: Experiments and simulation

Hoon Huh, Yanshan Lou, H. Huh, 2013 .

Effect of strain rate on plastic anisotropy of advanced high strength steel sheets

H. Huh, Chan-Bok Lee, J. Huh, 2013 .

Effect of Stain Rate on Microstructure Evolution and Compressive Deformation Behavior of High-Strength Aluminum Coating Materials Fabricated by the Kinetic Spray Process

H. Huh, Changhee Lee, Kee‐Ahn Lee, 2015 .

Investigation of effective material properties in composites with internal defect or reinforcement particles

H. Huh, H. Hahn, Chunhui Yang, 2005 .

Evaluation of effective material properties of composite materials using special FEM

T. Hahn, H. Huh, Chunhui Yang, 2003 .

Hybrid Special Finite Element Method for Bi-Material Crack

H. Huh, Y.X. Zhang, Chun Hui Yang, 2006 .

Blank Design and Strain Estimates for Sheet Metal Forming Processes by a Finite Element Inverse Approach with Initial Guess of Linear Deformation

Hoon Huh, H. Huh, Chung-ho Lee, 1998 .

Blank design and strain prediction of automobile stamping parts by an inverse finite element approach

Hoon Huh, C. H. Lee, H. Huh, 1997 .

Finite-element analysis and design of binder wraps for automobile sheet metal parts using surface boundary condition

Jeong Whan Yoon, J. H. Lee, J. H. Lee, 1995, Journal of Materials Engineering and Performance.

Modeling of rate-dependent hardening behaviors of the TWIP980 steel sheet in tension and compression

Hoon Huh, Geunsu Joo, H. Huh, 2017 .

Rate-Dependent Material Parameters of the Combined Isotropic/Kinematic Hardening Model for the TRIP980 Steel Sheet

H. Huh, G. Joo, 2016 .

Tool design in a multi-stage drawing and ironing process of a rectangular cup with a large aspect ratio using finite element analysis

Hoon Huh, Seung-Ho Kim, Se-Ho Kim, 2002 .

Modeling of shear ductile fracture considering a changeable cut-off value for stress triaxiality

Hoon Huh, Jeong Whan Yoon, Yanshan Lou, 2013 .

The parametric process design of tension levelling with an elasto-plastic finite element method

Hoon Huh, Sang Rae Park, Hyoung Wook Lee, 2001 .

Determination of true stress–true strain curves of polymers at various strain rates using force equilibrium grid method

Jin Sung Kim, Hoon Huh, Chunghee Park, 2012 .

Evaluation of Dynamic Tensile Characteristics of Polypropylene Composites with Temperature Variation

H. Huh, Kang-Wook Lee, Jin Sung Kim, 2009 .

Electrothermal analysis of electric resistance spot welding processes by a 3-D finite element method

Hoon Huh, Woo-Jong Kang, H. Huh, 1997 .

Comparison of the optimum designs of center pillar assembly of an auto-body between conventional steel and ahss with a simplified side impact analysis

Hoon Huh, Gihyun Bae, H. Huh, 2012 .

Dynamic Deformation Behavior of Zr-Based Amorphous Alloy Matrix Composites Reinforced with STS304 or Tantalum Fibers

H. Huh, Sunghak Lee, Yongjin Kim, 2012, Metallurgical and Materials Transactions A.

Fracture loci of DP980 steel sheet for auto-body at intermediate strain rates

H. Huh, Sung Jun Lim, 2017 .

Evaluation of Ductile Fracture Criteria in a General Three-Dimensional Stress State Considering the Stress Triaxiality and the Lode Parameter

H. Huh, Y. Lou, 2013 .

Dynamic Constitutive Equations of Auto-body Steel Sheets with the Variation of Temperature (II) –Flow Stress Constitutive Equation–

J. Song, H. Huh, Hee-Joong Lee, 2007 .

Dynamic Characteristics of the Sinter-Forged Cu-Cr Alloys with the Variation of Chrome Content

J. Song, H. Huh, 2006 .

Dynamic Material Property of the Sinter-Forged Cu-Cr Alloys with the Variation of Chrome Content

J. Song, H. Huh, 2006 .

Identification of Dynamic Behavior of Sheet Metals for an Auto-Body with Tension Split Hopkinson Bar

H. Huh, W. Kang, D. Chung, 1998 .

Process Parameter Design in Sheet Stamping Processes with Rigid-plastic Finite Element Analysis

Hoon Huh, Se-Ho Kim, Akira Tezuka, 2000 .

Tensile properties of CFRP manufactured by resin transfer molding considering stacking sequences at various strain rates

H. Huh, Jaeyoung Lim, Jesung Yoo, 2019, Journal of Composite Materials.

Dynamic Constitutive Equations of Auto-Body Steel Sheets with the Variation of Temperature (I) - Dynamic Material Characteristics with the Variation of Temperature -

J. Song, H. Huh, Hee-Joong Lee, 2007 .

A Study on the Strain-Rate Sensitivity According to the Temperature for Steel Sheets of an Auto-Body

H. Huh, Sang-hu Park, H. Lee, 2006 .

Evaluation of Dynamic Deformation Properties of Metallic Materials with Different Crystal Structures Using Taylor Impact Test

H. Huh, Kyung-Oh Bae, L. Park, 2014 .

High Speed Tensile Tests of Steel Sheets for an Auto-body at the Intermediate Strain Rate

Jin Sung Kim, Hoon Huh, Ji-Ho Lim, 2005 .

Extension of a shear-controlled ductile fracture model considering the stress triaxiality and the Lode parameter

H. Huh, Y. Lou, 2013 .

Effect of Tensile Speed on the Failure Load of Laser Welding under Combined Loading Conditions

H. Huh, K. Pack, J. Ha, 2013 .

EFFECT OF TENSILE SPEED ON THE FAILURE LOAD OF A SPOT WELD UNDER COMBINED LOADING CONDITIONS

H. Huh, Ji-Ho Lim, Jh Song, 2008 .

Dynamic limit analysis formulation for impact simulation of structural members

Hoon Huh, Kee Poong Kim, H. Huh, 2006 .

Evaluation of the Finite Element Modeling of Spot-Welded Region for Crash Analysis

Hoon Huh, Sung-Ho Kim, Jung-Han Song, 2006 .

Process design of combined deep drawing and electromagnetic sharp edge forming of DP980 steel sheet

Hoon Huh, Min-seog Choi, N. Park, 2017 .

A time-discontinuous implicit variational integrator for stress wave propagation analysis in solids

Hoon Huh, K. C. Park, K. Park, 2011 .

Stress evaluation with numerical integration schemes in finite element analysis of elasto‐plastic bending

Hoon Huh, Seok-Bong Kim, H. Huh, 2000 .

Optimum finite element for simulation of elasto-plastic bending of sheet metal

Hoon Huh, Seok-Bong Kim, H. Huh, 1998 .

Finite element stress analysis of the reinforced tire contact problem

H. Huh, H. Huh, Y. K. Kwak, 1990 .

Shear Stress Hardening Curves of AISI 4130 Steel at Ultra-high Strain Rates with Taylor Impact Tests

H. Huh, Seung-Bea Lee, 2021 .

Effect of auxetic structures on crash behavior of cylindrical tube

Hoon Huh, Jonghun Yoon, Sung-Jun Park, 2019, Composite Structures.

Design sensitivity analysis of sheet metal forming processes with a direct differentiation method

H. Huh, S. H. Kim, H. Huh, 2002 .

Optimum process design in sheet-metal forming with finite element analysis

Hoon Huh, Se-Ho Kim, H. Huh, 2000 .

Estimation of Shape and Non-shape Parameters in Sheet Metal Forming Processes with Inverse Finite Element Analysis

Hoon Huh, C. H. Lee, H. Huh, 1998 .

Collapse simulation of tubular structures using a finite element limit analysis approach and shell elements

Hoon Huh, Hyun Sup Kim, Keepoong Kim, 2001 .

Impact Simulation of Auto-body Structures With an Elasto-Plastic Explicit Finite Element Method

H. Huh, W. Kang, 2000 .

Crash Analysis of Auto-body Structures Considering the Strain-Rate Hardening Effect

Hoon Huh, Woo Jong Kang, H. Huh, 2000 .

REGRESSION MODEL FOR LIGHT WEIGHT AND CRASHWORTHINESS ENHANCEMENT DESIGN OF AUTOMOTIVE PARTS IN FRONTAL CAR CRASH

Hoon Huh, Sung-Ho Park, Gi Hyun Bae, 2008 .

Light-weight Design with a Simplified Center-pillar Model for Improved Crashworthiness

Hoon Huh, Gihyun Bae, Junghan Song, 2006 .

Side Impact Analysis of an Auto-body with 60TRIP Steel for Side Members

Hoon Huh, Soo Sik Han, Jung Han Song, 2003 .

Mesh regularization in sheet metal forming of autobody members for crashworthiness assessment

Hoon Huh, J. H. Yoon, H. Huh, 2004 .

Finite Element Analysis of Powdered Magnet Sinter-forging Processes Considering Deformable Body Contact

Choong-Ho Lee, H. Huh, H. Lee, 1999 .

Study on the Retraction of Anterior Teeth for the Lingual Orthodontics with the Three-Dimensional Finite Element Method

J. Song, H. Huh, Hyun-Sang Park, 2004 .

Prediction of fracture in hub-hole expanding process using a new ductile fracture criterion

Hoon Huh, Junwu Lee, Huijin Kim, 2007 .

Evaluation of Hole Flangeability of Steel Sheet with Respect to the Hole Processing Condition

H. Huh, Sung Ho Park, H. Kim, 2006 .

EFFECT OF HELICITY ON THE BUCKLING BEHAVIOR OF SINGLE-WALL CARBON NANOTUBES

H. Huh, J. Huh, 2008 .

Design Optimization of Roller Straightening Process for Steel Cord using Response Surface Methodology

Hoon Huh, Jong‐Sup Lee, Jong‐Gu Bae, 2007 .

Characterization of flow stress at ultra-high strain rates by proper extrapolation with Taylor impact tests

Ikjin Lee, H. Huh, Kwanghyun Ahn, 2016 .

Validation of Dynamic Hardening Models with Taylor Impact Tests at High Strain Rates

H. Huh, M. Piao, I. Lee, 2014 .

Effect of Strain Rate on Mechanical Response of PBX Simulants

H. Huh, Jungsu Park, Chunghee Park, 2014 .

Dynamic Tensile Tests of Auto-Body Steel Sheets with the Variation of Temperature

J. Song, H. Huh, Hee-Joong Lee, 2006 .

Comparative Crashworthiness Assessment of the ULSAB-AVC Model with Advance High Strength Steel and with Low Strength Steel

Hoon Huh, Seung-Ho Park, Se-Ho Kim, 2006 .

Comparative Crashworthiness Assessment of the ULSAB-AVC model with Advance High Strength Steel and Conventional Steel

H. Huh, Se-Ho Kim, Seung-Ho Park, 2005 .

Crash-worthiness assessment of thin-walled structures with the high-strength steel sheet

H. Huh, W. J. Kang, H. Huh, 2002 .

Material Behaviors of PBX Simulant with Various Strain Rates

H. Huh, J. Park, Chunghee Park, 2012 .

The Effects of Local Buckling on the Crash Energy Absorption of Thin-walled Expansion Tubes

Jin Sung Kim, Hoon Huh, Kwanghyun Ahn, 2008 .

Evaluation of the effect of the strain rate on the tensile properties of carbon–epoxy composite laminates

Jung-Ju Lee, H. Huh, J. Kwon, 2017 .

NUMERICAL ANALYSIS ON MAGNETIC-ELASTO-PLASTIC BUCKLING AND BENDING OF FERROMAGNETIC RECTANGULAR PLATE

H. Huh, Yuanwen Gao, 2008 .

Crushing analysis of polygonal columns and angle elements

Hoon Huh, Xiong Zhang, Xiong Zhang, 2010 .

Energy absorption of longitudinally grooved square tubes under axial compression

Hoon Huh, Xiong Zhang, H. Huh, 2009 .

A simulation-based design parameter study in the stamping process of an automotive member

Hoon Huh, Se-Ho Kim, Jung-Han Song, 2007 .

Measurement uncertainty evaluation with correlation for dynamic tensile properties of auto-body steel sheets

Hoon Huh, H. Huh, C. G. Kim, 2017 .

Standard Uncertainty Evaluation for Dynamic Tensile Properties of Auto-Body Steel-Sheets

H. Huh, K. S. Chae, C. G. Kim, 2011 .

Micro-Tensile Tests of Aluminum Thin Foil with the Variation of Strain Rate

Hoon Huh, Junbeom Kwon, Jeehyang Huh, 2013 .

Influence of Tensile Speeds on the Failure Loads of the DP590 Spot Weld under Various Combined Loading Conditions

J. Song, H. Huh, 2015 .

Electromagneto-thermo-mechanical behaviors of conductive circular plate subject to time-dependent magnetic fields

H. Huh, Yuanwen Gao, Bang Xu, 2010 .

Finite Element Analysis of Room Temperature Nanoimprint Lithography Process with Rate Dependent Plasticity

J. Song, H. Huh, H. Hahn, 2006 .

A general algorithm for plastic flow simulation by finite element limit analysis

Hoon Huh, Wei H. Yang, Choong-Ho Lee, 1999 .

Efficient Coil Design by Electromagnetic Topology Optimization for Electromagnetic Sharp Edge Forming of DP980 Steel Sheet

Hoon Huh, M. K. Choi, M. H. Seo, 2016 .

A Constitutive Model for Polymer-Bonded Explosive Simulants Considering Stress Softening and Residual Strain

H. Huh, Jungsu Park, K. Yeom, 2014 .

New pseudo-elastic model for polymer-bonded explosive simulants considering the Mullins effect

H. Huh, Jungsu Park, Sehwan Jeong, 2013 .

A general algorithm for limit solutions of plane stress problems

Hoon Huh, Wei H. Yang, H. Huh, 1986 .

A finite element simulation of resin transfer molding based on partial nodal saturation and implicit time integration

Hoon Huh, Mark Lin, M. Lin, 1998 .