Qian Li

发表

Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method

Qian Li, Changyu Shen, Lixia Wang, 2007 .

Polymer scaffolds for vascular tissue engineering fabricated by combined electrospinning and hot embossing

X. Zhang, Qian Li, Xiaofeng Wang, 2017, Biomedical materials.

HDPE solution crystallization induced by electrospun PA66 nanofiber

Xiangfang Peng, Changyu Shen, Qian Li, 2011 .

Structural evolution of poly(lactic acid) upon uniaxial stretching investigated by in situ infrared spectroscopy

Changyu Shen, Qian Li, Chuntai Liu, 2016 .

Nonisothermal Crystallization Kinetics of Poly(lactic acid) Nucleated with a Multiamide Nucleating Agent

Changyu Shen, Qian Li, Tingting Xu, 2014 .

Nonisothermal crystallization kinetics of biodegradable poly(lactic acid)/zinc phenylphosphonate composites

Changyu Shen, Qian Li, G. Zheng, 2014 .

The Numerical Simulation of the Crystallization Morphology Evolution of Semi-Crystalline Polymers in Injection Molding

Changyu Shen, Lixia Wang, Qian Li, 2010 .

Effects of Process Parameters and Two-Way Interactions on Sink Mark Depth of Injection Molded Parts by Using the Design of Experiment Method

Changyu Shen, Changyu Shen, Lixia Wang, 2007 .

An experimental investigation and modeling of micro array replication with Zr-based bulk metallic glass using a hot embossing process

X. Zhang, Qian Li, Shujie Yan, 2017 .

The effect of plasticizer on the shape memory properties of poly(lactide acid)/poly(ethylene glycol) blends

Lixia Wang, Qian Li, Yijun Guo, 2018, Journal of Materials Research.

Numerical Simulation of the Crack Formation in the Quenched Poly(l‐lactic acid) Spherulites

Qian Li, Yanping Liu, Hanghang Wei, 2018 .

Nucleation effect of layered metal phosphonate on crystallization of isotactic polypropylene

Changyu Shen, Qian Li, Tingting Xu, 2014 .

Facile Fabrication of Nylon66/Multi-Wall Carbon Nanotubes/Polyvinyl Alcohol Nanofiber Bundles for Use as Humidity Sensors

Changyu Shen, Qian Li, Chuntai Liu, 2020 .

Morphology evolution for isotactic polypropylene: Experiment and simulation

Changyu Shen, Lixia Wang, Qian Li, 2015 .

Study on the sensory and safety quality characteristics of "High mountain tea" and its formation causes: A comprehensive basic research

Qian Li, Cong-ning Nie, Xiao-hua Du, 2021 .

Second-order work and strain burst in single-crystalline micropillar plasticity

Qian Li, F. Shang, Xiangcheng Zhang, 2016 .

Polymer micro molding with bulk metallic glass mold

X. Zhang, Qian Li, Junfeng Li, 2015 .

Wetting Behavior of Polymer Melts on Bulk Metallic Glasses

X. Zhang, Qian Li, Wei Feng, 2013 .

Preparation and characterization of microbial biodegradable poly(3-hydroxybutyrate-co-4-hydroxybutyrate)/organoclay nanocomposites

Changyu Shen, Qian Li, Kaojin Wang, 2012 .

Suppression of β-crystal in iPP/PET Fiber Composites

Xiangfang Peng, Changyu Shen, Qian Li, 2010 .

Computing flow-induced stresses of injection molding based on PTT model

Changyu Shen, Qian Li, Wei Cao, 2010 .

Model and simulation for melt flow in micro-injection molding based on the PTT model

Changyu Shen, Qian Li, Wei Cao, 2011 .

Effect of Rapid Compression on the Crystallization Behaviour of Polyethylene

Changyu Shen, Qian Li, Wei Cao, 2013 .

Hierarchical crystalline structure of HDPE molded by gas-assisted injection molding

Changyu Shen, Qian Li, G. Zheng, 2007 .

Crystallization of poly(lactic acid) accelerated by cyclodextrin complex as nucleating agent

Changyu Shen, Qian Li, G. Zheng, 2012, Polymer Bulletin.

Electrospun PVDF/PAN membrane for pressure sensor and sodium-ion battery separator

Qian Li, Chuntai Liu, G. Zheng, 2021, Advanced Composites and Hybrid Materials.

A Library of L-Tyrosine-Derived Biodegradable Polyarylates for Potential Biomaterial Applications, Part I: Synthesis, Characterization and Accelerated Hydrolytic Degradation

Qian Li, Xia Huang, Chang-yu Shen, 2009, Journal of biomaterials science. Polymer edition.

Crystallization of poly(lactic acid) enhanced by phthalhydrazide as nucleating agent

Changyu Shen, Qian Li, Wei Cao, 2013, Polymer Bulletin.

Effect of small amount of multi-walled carbon nanotubes on crystallization and thermal-mechanical properties of overflow microinjection molded isotactic polypropylene

Qian Li, Chuntai Liu, G. Zheng, 2020 .

Transcrystallization in nanofiber bundle/isotactic polypropylene composites: effect of matrix molecular weight

Xiangfang Peng, Changyu Shen, Qian Li, 2012, Colloid and Polymer Science.

Gas-assisted Injection Molded Polypropylene/Glass Fiber Composite: Foaming Structure and Tensile Strength

Qian Li, G. Zheng, Jingbo Chen, 2009 .

Gas-assisted injection molded polypropylene: The skin-core structure

Changyu Shen, Qian Li, G. Zheng, 2008 .

Morphological comparison of isotactic polypropylene molded by water-assisted and conventional injection molding

Changyu Shen, Qian Li, Chuntai Liu, 2011 .

Transcrystallinity in a Polycarbonate(PC)/Polyethylene(PE) Blend Prepared by Gas-Assisted Injection Molding: A New Understanding of Its Formation Mechanism

Changyu Shen, Qian Li, Chuntai Liu, 2008 .

Enhanced orientation of the water-assisted injection-molded ipp in the presence of nucleating agent

Xiangfang Peng, Changyu Shen, Qian Li, 2012 .

β-transcrystallinity developed from the novel ringed nuclei in the glass fiber/isotactic polypropylene composite

Xiangfang Peng, Changyu Shen, Qian Li, 2011 .

Nano-hybrid shish-kebab: Isotactic polypropylene epitaxial growth on electrospun polyamide 66 nanofibers via isothermal crystallization

Xiangfang Peng, Changyu Shen, Qian Li, 2011 .

Cold crystallization behavior of glassy poly(lactic acid) prepared by rapid compression

Changyu Shen, Qian Li, Yaming Wang, 2015 .

The role of gas penetration on morphological formation of polycarbonate/polyethylene blend molded by gas-assisted injection molding

Changyu Shen, Qian Li, Chuntai Liu, 2007 .

Effect of phthalimide as an efficient nucleating agent on the crystallization kinetics of poly(lactic acid)

Changyu Shen, Qian Li, G. Zheng, 2013 .

Oriented structure in stretched isotactic polypropylene melt and its unexpected recrystallization: optical and X-ray studies

Xiangfang Peng, Changyu Shen, Qian Li, 2011 .

Effects of cavity size and density on polymer micro hot embossing

Qian Li, N. Zhao, Tengjiao Jiang, 2015 .

Polymer Micro Hot Embossing with Bulk Metallic Glass Mold Insert

Qian Li, Cheng-guo Shen, R. Bai, 2012 .

Unusual structural evolution of poly(lactic acid) upon annealing in the presence of an initially oriented mesophase.

Changyu Shen, Qian Li, Kaojin Wang, 2014, Soft matter.

The microstructures of extrusion cast biodegradable poly(butylene succinate) films investigated by X-ray diffraction

Changyu Shen, Qian Li, Kaojin Wang, 2013 .

Effect of morphology designing on the structure and properties of PLA/PEG/ABS blends

Qian Li, Shiwei Wang, Jianming Zhang, 2016, Colloid and Polymer Science.

Toughening of polybutene-1 with form I′ induced by rapid pressurization

Qian Li, Yanping Liu, Yingchao Wang, 2021, CrysteEngComm.

Nonisothermal melt crystallization kinetics of poly(ethylene terephthalate)/clay nanocomposites

Changyu Shen, Qian Li, Jingbo Chen, 2004 .

Scale effect on filling stage in micro-injection molding for thin slit cavities

Changyu Shen, Lixia Wang, Qian Li, 2012 .

Mould wall friction effects on micro injection moulding based on simulation of MIS

Xiang Zhang, Changyu Shen, Changyu Shen, 2010 .

Experimental study on the surface characteristics of Pd-based bulk metallic glass

Qian Li, N. Zhao, Xiang Zhang, 2014 .

Fatigue behavior of Zr-based metallic glass micropillars

Qian Li, Hossein Ravanbakhsh, R. Wei, 2020 .