C. Soriano

发表

Laser Cladding of Vanadium-Carbide Tool Steels for Die Repair

C. Sanz, J. Leunda, C. Soriano, 2011 .

Study on the Main Influencing Factors in the Removal Process of Non-Stick Fluoropolymer Coatings Using Nd:YAG Laser

P. E. Romero, C. Soriano, G. Guerrero-Vaca, 2019, Polymers.

Laser surface tempering of hardened chromium-molybdenum alloyed steel

C. Soriano, A. Yáñez, G. Alberdi, 2018 .

Microstructural and tensile characterization of Inconel 718 laser coatings for aeronautic components

J. Leunda, C. Soriano, V. G. Navas, 2013 .

Effect of metal micro-structuring on the mechanical behavior of polymer–metal laser T-joints

G. Verhaeghe, J. Leunda, C. Soriano, 2016 .

A Combined Experimental and Numerical Approach to the Laser Joining of Hybrid Polymer – Metal Parts

G. Verhaeghe, C. Sanz, C. Soriano, 2014 .

Stripping of PFA Fluoropolymer Coatings Using a Nd:YAG Laser (Q-Switch) and an Yb Fiber Laser (CW)

P. E. Romero, C. Soriano, G. Guerrero-Vaca, 2019, Polymers.

Microstructural Tuning of a Laser-Cladding Layer by Means of a Mix of Commercial Inconel 625 and AISI H13 Powders

J. Leunda, C. Soriano, G. Artola, 2019, Materials.

Laser Surface Smoothing of Nickel-based Superalloys

J. Leunda, C. Soriano, J. Lambarri, 2013 .

Resolving problems with the origin of Las Cañadas caldera (Tenerife, Canary Islands): Los Roques de García Formation—Part of a major debris avalanche or an in situ, stratified, edifice-building succession?

C. Soriano, J. Martí, R. Cas, 2010 .

Laser cladding strategies for producing WC reinforced NiCr coatings inside twin barrels

J. Leunda, C. Soriano, C. Sanz, 2016 .

Inner walls laser cladding of WC reinforced Ni coatings

C. Sanz, J. Leunda, C. Soriano, 2015 .

Tube pumices as strain markers of the ductile–brittle transition during magma fragmentation

C. Soriano, J. Martí, D. Dingwell, 1999, Nature.

Geometrical control of DED processes based on 3D scanning applied to the manufacture of complex parts

A. Lamikiz, C. Soriano, L. Uriarte, 2020 .

Effect of laser surface hardening on the microstructure, hardness and residual stresses of austempered ductile iron grades

Carlos Soriano, Josu Leunda, J. Leunda, 2011 .

Effect of laser tempering of high alloy powder metallurgical tool steels after laser cladding

J. Leunda, C. Soriano, V. G. Navas, 2014 .

Geometrical study of 5356 aluminium alloy by means of a concentric wire laser metal deposition

C. Soriano, E. Irazu, Iker Garmendia, 2022, Procedia CIRP.

Study of the Geometrical Limitations Associated to the Metallic Part Manufacturing by the LMD Process

Carlos Soriano, Iker Garmendia, Joseba Pujana, 2018 .

Compositional Modification of Tool Steel to Improve Its Wear Resistance

J. Leunda, C. Soriano, G. Artola, 2019, Metallurgical and Materials Transactions A.

Study of the influence of the oscillation frequency on the surface hardening process of the 42CrMo4 alloy using an oscillating laser beam

C. Soriano, A. Yáñez, G. Alberdi, 2021 .

Laser engraving of paper and polymeric materials for tactile detection

Emilio Pérez, Javier Gamo, J. A. Ramos-de-Campos, 2008, International Symposium on High Power Laser Systems and Applications.

Performance of a Pilot-Scale Biotrickling Filter in Controlling the Volatile Organic Compound Emissions in a Furniture Manufacturing Facility

Carmen Gabaldón, Jordi Palau, Feliu Sempere, 2009, Journal of the Air & Waste Management Association.