F. Eyma

发表

The detection of aeronautical defects in situ on composite structures using Non Destructive Testing

C. Garnier, M. Pastor, F. Eyma, 2011 .

Effects of machining parameters on raised grain occurring after the application of water-based finishes

F. Eyma, M. Irle, C. Belloncle, 2018, European Journal of Wood and Wood Products.

Moisture monitoring in glulam timber structures with embedded resistive sensors: study of influence parameters

M. Perrin, F. Eyma, Placide Uwizeyimana, 2020, Wood Science and Technology.

Numerical modeling of impact on wood-based sandwich structures

F. Eyma, B. Castanié, A. Cantarel, 2020, Mechanics of Advanced Materials and Structures.

Relationship between density and aesthetic attributes of wood and preference of Malagasy consumers

F. Eyma, T. Ramananantoandro, Miora F. Ramanakoto, 2013, Annals of Forest Science.

Title : Wood machining with a focus on French research in the last 50 years

F. Eyma, R. Marchal, P. Méausoone, 2017 .

Wood machining with a focus on French research in the last 50 years

Frédéric Mothe, Bernard Thibaut, Patrick Martin, 2016, Annals of Forest Science.

Wood peeling process monitoring: a comparison of signal processing methods to estimate veneer average lathe check frequency

Louis Etienne Denaud, Florent Eyma, Laurent Bléron, 2011, European Journal of Wood and Wood Products.

Identification of Phenolic Compounds from K. ivorensis by Selected Chromatographic and Spectrometric Techniques

F. Eyma, C. Arnaudguilhem, B. Charrier, 2021, Journal of Renewable Materials.

Study of the surface defects and dust generated during trimming of CFRP: Influence of tool geometry, machining parameters and cutting speed range

Redouane Zitoune, Bruno Castanié, Florent Eyma, 2014 .

Moisture content monitoring in glulam structures by embedded sensors via electrical methods

Florent Eyma, Marianne Perrin, Vincent Gibiat, 2017, Wood Science and Technology.

Crashworthiness of poplar wood veneer tubes

F. Eyma, B. Castanié, S. Rivallant, 2021, International Journal of Impact Engineering.

Manufacturing and quasi-static bending behavior of wood-based sandwich structures

Bruno Castanié, Florent Eyma, Arthur Cantarel, 2017 .

Study of the properties of thirteen tropical wood species to improve the prediction of cutting forces in mode B.

Patrick Martin, Florent Eyma, Pierre-Jean Méausoone, 2004 .

Influence of the transitional zone of wood species on cutting forces in the router cutting process (90–0)

P. Martin, F. Eyma, P-J. Méausoone, 2001, Holz als Roh- und Werkstoff.

Utilization of a dynamometric pendulum to estimate cutting forces involved during routing. Comparison with actual calculated values

Florent Eyma, Pierre-Jean Méausoone, Rémy Marchal, 2005 .

Visual and visuo-tactile preferences of Malagasy consumers for machined wood surfaces for furniture: acceptability thresholds for surface parameters

F. Eyma, T. Ramananantoandro, Miora F. Ramanakoto, 2017, European Journal of Wood and Wood Products.

Visuo-tactile and topographic characterizations of finished wood surface quality by French consumers and industrials: acceptability thresholds for raised grain

F. Eyma, B. Castanié, T. Ramananantoandro, 2019, Annals of Forest Science.

A comparison of three wood species (poplar, birch and oak) for crash application

F. Eyma, B. Castanié, S. Rivallant, 2022, European Journal of Wood and Wood Products.

Experimental investigation of compression and compression after impact of wood-based sandwich structures

Christophe Bouvet, Florent Eyma, Arthur Cantarel, 2019, Composite Structures.

Relationship between density and aesthetic attributes of wood and preference of Malagasy consumers

F. Eyma, T. Ramananantoandro, Miora F. Ramanakoto, 2013, Annals of Forest Science.

Study of trimming damages of CFRP structures in function of the machining processes and their impact on the mechanical behavior

F. Eyma, B. Castanié, H. Bougherara, 2014 .

Influence of trimming process on the surface quality and on the mechanical behavior of CFRP structures.

F. Eyma, B. Castanié, H. Bougherara, 2013 .

Influence of Machining Process and Machining Induced Surface Roughness on Mechanical Properties of Continuous Fiber Composites

B. Castanié, F. Eyma, B. Castanié, 2015 .

Machinability and surface quality during high speed trimming of multi directional CFRP

Redouane Zitoune, Bruno Castanié, Florent Eyma, 2013 .

Strains and cutting forces involved in the solid wood rotating cutting process

Florent Eyma, Pierre-Jean Méausoone, Patrick Martin, 2004 .

Experimental investigation of impact behavior of wood-based sandwich structures

F. Eyma, B. Castanié, A. Cantarel, 2018, Composites Part A: Applied Science and Manufacturing.

Influence of Tool Geometry and Machining Parameters on the Surface Quality and the Effect of Surface Quality on Compressive Strength of Carbon Fibre Reinforced Plastic

F. Eyma, B. Castanié, R. Zitoune, 2013 .

Comparative Study of Tools in Drilling Composites T700-M21 and T800-M21

F. Eyma, G. Dessein, Y. Landon, 2013 .

Surface Quality and Dust Analysis in High Speed Trimming of CFRP

Redouane Zitoune, Bruno Castanié, Florent Eyma, 2012 .

Strain measurement in glulam timber for bridges with embedded strain gauges and detection of moisture-variation effects

M. Perrin, F. Eyma, Placide Uwizeyimana, 2023, Wood Material Science & Engineering.

Mode I delamination R-curve in poplar laminated veneer lumber

F. Eyma, B. Castanié, A. Cantarel, 2023, Theoretical and Applied Fracture Mechanics.

Numerical analysis of the impact behaviour of a composite eco-structure

F. Eyma, S. Sanchez-Saez, A. Cantarel, 2023, Composite Structures.

Durability study of glulam timber under cyclic moisture loading

M. Perrin, F. Eyma, Placide Uwizeyimana, 2021, Construction and Building Materials.