J. Lachambre

发表

Experimental and numerical investigation on fatigue damage in micro-lattice materials by Digital Volume Correlation and μCT-based finite element models

J. Buffière, L. Boniotti, S. Dancette, 2022, Engineering Fracture Mechanics.

Extraction of stress intensity factors for 3D small fatigue cracks using digital volume correlation and X-ray tomography

Julien Réthoré, Arnaud Weck, Jean-Yves Buffiere, 2015 .

Demonstration of the Use of 3D X-ray Tomography to Compare the Uniformity of Catalyst Coatings in Open-Cell Foams

J. Lachambre, Marie-Line Zanota, S. Pallier, 2018, ChemEngineering.

Demonstration of the Use of 3 D X-ray Tomography to Compare the Uniformity of Catalyst Coatings in Open-Cell Foams

J. Lachambre, Marie-Line Zanota, S. Pallier, 2018 .

Quantification of the local topological variations of stripped and plated lithium metal by X-Ray tomography.

E. Maire, J. Lachambre, R. Bouchet, 2020, ACS applied materials & interfaces.

Arrays of high aspect ratio magnetic microstructures for large trapping throughput in lab-on-chip systems

J. Lachambre, V. Dupuis, A. Deman, 2018, Microfluidics and Nanofluidics.

Two-Scale Tomography Based Finite Element Modeling of Plasticity and Damage in Aluminum Foams

E. Maire, J. Adrien, S. Dancette, 2018, Materials.

Polymerization shrinkage of resin-based composites for dental restorations: A digital volume correlation study.

E. Maire, J. Adrien, J. Lachambre, 2019, Dental Materials.

Direct-ink writing of strong and biocompatible titanium scaffolds with bimodal interconnected porosity

J. Adrien, J. Lachambre, X. Boulnat, 2021 .

Dislocation dynamics during cyclic loading in copper single crystal

J. Lachambre, S. Deschanel, J. Weiss, 2019 .

Application of X-ray microtomography to study the influence of the casting microstructure upon the tensile behaviour of an Al-Si alloy

Eric Charkaluk, Ahmed El Bartali, Nathalie Limodin, 2014 .

In situ observation of syntactic foams under hydrostatic pressure using X-ray tomography

E. Maire, J. Adrien, J. Lachambre, 2013 .

Investigation of Fatigue Crack Propagation in Nickel Superalloy Using Diffraction Contrast Tomography and Phase Contrast Tomography

J. Lachambre, A. King, O. Messé, 2014 .

In situ 3D characterization of fatigue cracks displacement fields

J. Buffière, J. Lachambre, A. Weck, 2013 .

3D Analysis of a Fatigue Crack in Cast Iron Using Digital Volume Correlation of X-ray Tomographic Images

J. Buffière, J. Adrien, J. Lachambre, 2013 .

In situ synchrotron study of sintering of gas-atomized Ti-6Al-4V powders using concomitant micro-tomography and X-ray diffraction: effect of particle size and interstitials on densification and phase transformation kinetics

E. Maire, J. Adrien, J. Lachambre, 2023, Acta Materialia.

Ontogenetic variability of the intertympanic sinus distinguishes lineages within Crocodylia

J. Lachambre, J. Martin, L. Hautier, 2023, Journal of anatomy.

Fatigue Performances of Chemically Etched Thin Struts Built by Selective Electron Beam Melting: Experiments and Predictions

E. Maire, R. Dendievel, J. Buffière, 2020, Materialia.

3D Analyses of crack propagation in torsion

J. Buffière, S. Dancette, J. Lachambre, 2015 .

Focussed on characterization of crack tip fields 3 D Analyses of crack propagation in torsion

S. Dancette, J. Lachambre, I. Serrano-Muñoz, 2015 .

3D characterization of closure of surface and internal fatigue cracks in nodular cast iron using Digital Volume Correlation of laboratory X-ray tomography images

J. Lachambre, Jérôme Adrien, J. Buffière, 2024, International Journal of Fatigue.

3D models related to the publication: Ontogenetic variability of the intertympanic sinus distinguishes lineages within Crocodylia

J. Lachambre, J. Martin, L. Hautier, 2023, MorphoMuseuM.

Bichromatic melt pool thermal measurement based on a Red, Green, and Blue camera: Application to additive manufacturing processes

V. Kaftandjian, J. Lachambre, T. Elguedj, 2023, Optics & Laser Technology.